rpi: a backend for Raspberry Pi
Add a new backend for the Raspberry Pi.
This backend uses the DispmanX API to initialise the display, and create
an EGLSurface, so that GLESv2 rendering is shown on the "framebuffer".
No X server is involved. All compositing happens through GLESv2.
The created EGLSurface is specifically configured as buffer content
preserving, otherwise Weston wouuld show only the latest damage and
everything else was black. This may be sub-optimal, since we are not
alternating between two buffers, like the DRM backend is, and content
preserving may imply a fullscreen copy on each frame.
Page flips are not properly hooked up yet. The display update will
block, and we use a timer to call weston_output_finish_frame(), just
like the x11 backend does.
This backend handles the VT and tty just like the DRM backend does.
While VT switching works in theory, the display output seems to be
frozen while switched away from Weston. You can still switch back.
Seats and connectors cannot be explicitly specified, and multiple seats
are not expected.
Udev is used to find the input devices. Input devices are opened
directly, weston-launch is not supported at this time. You may need to
confirm that your pi user has access to input device nodes.
The Raspberry Pi backend is built by default. It can be build-tested
without the Raspberry Pi headers and libraries, because we provide stubs
in rpi-bcm-stubs.h, but such resulting binary is non-functional. If
using stubs, the backend is built but not installed.
VT and tty handling, and udev related code are pretty much copied from
the DRM backend, hence the copyrights. The rpi-bcm-stubs.h code is
copied from the headers on Raspberry Pi, including their copyright
notice, and modified.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
12 years ago
|
|
|
/*
|
|
|
|
Copyright (c) 2012, Broadcom Europe Ltd
|
|
|
|
All rights reserved.
|
|
|
|
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
* Redistributions of source code must retain the above copyright
|
|
|
|
notice, this list of conditions and the following disclaimer.
|
|
|
|
* Redistributions in binary form must reproduce the above copyright
|
|
|
|
notice, this list of conditions and the following disclaimer in the
|
|
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
* Neither the name of the copyright holder nor the
|
|
|
|
names of its contributors may be used to endorse or promote products
|
|
|
|
derived from this software without specific prior written permission.
|
|
|
|
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
|
|
|
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
|
|
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY
|
|
|
|
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
|
|
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
|
|
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
|
|
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
|
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
|
|
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This file provides just enough types and stubs, so that the rpi-backend
|
|
|
|
* can be built without the real headers and libraries of the Raspberry Pi.
|
|
|
|
*
|
|
|
|
* This file CANNOT be used to build a working rpi-backend, it is intended
|
|
|
|
* only for build-testing, when the proper headers are not available.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef RPI_BCM_STUBS
|
|
|
|
#define RPI_BCM_STUBS
|
|
|
|
|
|
|
|
#include <stdint.h>
|
|
|
|
|
|
|
|
/* from /opt/vc/include/bcm_host.h */
|
|
|
|
|
|
|
|
static inline void bcm_host_init(void) {}
|
|
|
|
static inline void bcm_host_deinit(void) {}
|
|
|
|
|
rpi: add a Dispmanx renderer
Dispmanx is the prorietary display API on the Raspberry Pi, which
provides hardware compositing. Every visible surface is assigned a
Dispmanx element, and the hardware or firmware will do all compositing
onto screen. The API supports translation, scaling, flips, discrete
rotations in 90-degree steps, alpha channel on the surfaces, and
full-surface alpha on top.
Previously, Dispmanx capabilities were used via the weston_plane
mechanism, where surfaces were assigned to planes when possible, and
otherwise transparently falling back to GLESv2 compositing. Because we
have no way to use the same memory buffer as a GL texture and a Dispmanx
resource, we had to prepare for both. In the worst case, that means one GL
texture, and two (double-buffered case) Dispmanx resources, all the size
of a whole surface, for all surfaces. This was eating memory fast. To
make things worse (and less slow), the wl_shm buffer was kept around,
since it was copied to either a texture or a resource as needed. This
caused all clients to need two buffers. In a Dispmanx-only renderer, we
can drop the GL texture, and we can release wl_shm buffer immediately
after the first copy, so clients become effectively single-buffered. So
from the worst case of 5 buffers per surface, we go down to 3 or just
2 (single-buffered Dispmanx element, one wl_shm buffer in the client)
buffers per surface.
As this will replace the GL renderer on rpi, we cannot fall back to the
GLESv2 compositing anymore. We lose arbitrary surface rotation, but we
lose also the GL fallback, which caused glitches.
This patch depends on new RaspberryPi firmware. Older firmware may not
render ARGB surfaces correctly, solid color surfaces maybe cause a
performance hit, and the output may completely fail in case the firmware
does not fall back internal off-line compositing properly as needed.
This new rpi-renderer support surface translation and scaling, but not
rotation or transpose (not even in 90-deg steps). In theory, 90-deg step
surface rotation is possible to support. Output transformations are
supported, but flipped variants do not seem to work right.
As a detail, menus and other surfaces that are simply translated with
respect to another surface caused falling back to the GL renderer. The
rpi-renderer handles them directly.
This patch only adds the new renderer, but does not hook it up into use.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
12 years ago
|
|
|
|
|
|
|
/* from /opt/vc/include/interface/vmcs_host/vc_dispservice_defs.h */
|
|
|
|
|
|
|
|
#define TRANSFORM_HFLIP (1<<0)
|
|
|
|
#define TRANSFORM_VFLIP (1<<1)
|
|
|
|
#define TRANSFORM_TRANSPOSE (1<<2)
|
|
|
|
|
|
|
|
|
rpi: a backend for Raspberry Pi
Add a new backend for the Raspberry Pi.
This backend uses the DispmanX API to initialise the display, and create
an EGLSurface, so that GLESv2 rendering is shown on the "framebuffer".
No X server is involved. All compositing happens through GLESv2.
The created EGLSurface is specifically configured as buffer content
preserving, otherwise Weston wouuld show only the latest damage and
everything else was black. This may be sub-optimal, since we are not
alternating between two buffers, like the DRM backend is, and content
preserving may imply a fullscreen copy on each frame.
Page flips are not properly hooked up yet. The display update will
block, and we use a timer to call weston_output_finish_frame(), just
like the x11 backend does.
This backend handles the VT and tty just like the DRM backend does.
While VT switching works in theory, the display output seems to be
frozen while switched away from Weston. You can still switch back.
Seats and connectors cannot be explicitly specified, and multiple seats
are not expected.
Udev is used to find the input devices. Input devices are opened
directly, weston-launch is not supported at this time. You may need to
confirm that your pi user has access to input device nodes.
The Raspberry Pi backend is built by default. It can be build-tested
without the Raspberry Pi headers and libraries, because we provide stubs
in rpi-bcm-stubs.h, but such resulting binary is non-functional. If
using stubs, the backend is built but not installed.
VT and tty handling, and udev related code are pretty much copied from
the DRM backend, hence the copyrights. The rpi-bcm-stubs.h code is
copied from the headers on Raspberry Pi, including their copyright
notice, and modified.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
12 years ago
|
|
|
/* from /opt/vc/include/interface/vctypes/vc_display_types.h */
|
|
|
|
|
|
|
|
typedef enum
|
|
|
|
{
|
|
|
|
VCOS_DISPLAY_INPUT_FORMAT_INVALID = 0,
|
|
|
|
} DISPLAY_INPUT_FORMAT_T;
|
|
|
|
|
|
|
|
/* from /opt/vc/include/interface/vctypes/vc_image_types.h */
|
|
|
|
|
|
|
|
typedef struct tag_VC_RECT_T {
|
|
|
|
int32_t x;
|
|
|
|
int32_t y;
|
|
|
|
int32_t width;
|
|
|
|
int32_t height;
|
|
|
|
} VC_RECT_T;
|
|
|
|
|
|
|
|
typedef enum {
|
|
|
|
VC_IMAGE_ROT0,
|
rpi: add a Dispmanx renderer
Dispmanx is the prorietary display API on the Raspberry Pi, which
provides hardware compositing. Every visible surface is assigned a
Dispmanx element, and the hardware or firmware will do all compositing
onto screen. The API supports translation, scaling, flips, discrete
rotations in 90-degree steps, alpha channel on the surfaces, and
full-surface alpha on top.
Previously, Dispmanx capabilities were used via the weston_plane
mechanism, where surfaces were assigned to planes when possible, and
otherwise transparently falling back to GLESv2 compositing. Because we
have no way to use the same memory buffer as a GL texture and a Dispmanx
resource, we had to prepare for both. In the worst case, that means one GL
texture, and two (double-buffered case) Dispmanx resources, all the size
of a whole surface, for all surfaces. This was eating memory fast. To
make things worse (and less slow), the wl_shm buffer was kept around,
since it was copied to either a texture or a resource as needed. This
caused all clients to need two buffers. In a Dispmanx-only renderer, we
can drop the GL texture, and we can release wl_shm buffer immediately
after the first copy, so clients become effectively single-buffered. So
from the worst case of 5 buffers per surface, we go down to 3 or just
2 (single-buffered Dispmanx element, one wl_shm buffer in the client)
buffers per surface.
As this will replace the GL renderer on rpi, we cannot fall back to the
GLESv2 compositing anymore. We lose arbitrary surface rotation, but we
lose also the GL fallback, which caused glitches.
This patch depends on new RaspberryPi firmware. Older firmware may not
render ARGB surfaces correctly, solid color surfaces maybe cause a
performance hit, and the output may completely fail in case the firmware
does not fall back internal off-line compositing properly as needed.
This new rpi-renderer support surface translation and scaling, but not
rotation or transpose (not even in 90-deg steps). In theory, 90-deg step
surface rotation is possible to support. Output transformations are
supported, but flipped variants do not seem to work right.
As a detail, menus and other surfaces that are simply translated with
respect to another surface caused falling back to the GL renderer. The
rpi-renderer handles them directly.
This patch only adds the new renderer, but does not hook it up into use.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
12 years ago
|
|
|
/* these are not the right values: */
|
|
|
|
VC_IMAGE_ROT90,
|
|
|
|
VC_IMAGE_ROT180,
|
|
|
|
VC_IMAGE_ROT270,
|
|
|
|
VC_IMAGE_MIRROR_ROT0,
|
|
|
|
VC_IMAGE_MIRROR_ROT90,
|
|
|
|
VC_IMAGE_MIRROR_ROT180,
|
|
|
|
VC_IMAGE_MIRROR_ROT270,
|
rpi: a backend for Raspberry Pi
Add a new backend for the Raspberry Pi.
This backend uses the DispmanX API to initialise the display, and create
an EGLSurface, so that GLESv2 rendering is shown on the "framebuffer".
No X server is involved. All compositing happens through GLESv2.
The created EGLSurface is specifically configured as buffer content
preserving, otherwise Weston wouuld show only the latest damage and
everything else was black. This may be sub-optimal, since we are not
alternating between two buffers, like the DRM backend is, and content
preserving may imply a fullscreen copy on each frame.
Page flips are not properly hooked up yet. The display update will
block, and we use a timer to call weston_output_finish_frame(), just
like the x11 backend does.
This backend handles the VT and tty just like the DRM backend does.
While VT switching works in theory, the display output seems to be
frozen while switched away from Weston. You can still switch back.
Seats and connectors cannot be explicitly specified, and multiple seats
are not expected.
Udev is used to find the input devices. Input devices are opened
directly, weston-launch is not supported at this time. You may need to
confirm that your pi user has access to input device nodes.
The Raspberry Pi backend is built by default. It can be build-tested
without the Raspberry Pi headers and libraries, because we provide stubs
in rpi-bcm-stubs.h, but such resulting binary is non-functional. If
using stubs, the backend is built but not installed.
VT and tty handling, and udev related code are pretty much copied from
the DRM backend, hence the copyrights. The rpi-bcm-stubs.h code is
copied from the headers on Raspberry Pi, including their copyright
notice, and modified.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
12 years ago
|
|
|
} VC_IMAGE_TRANSFORM_T;
|
|
|
|
|
|
|
|
typedef enum
|
|
|
|
{
|
|
|
|
VC_IMAGE_MIN = 0,
|
|
|
|
/* these are not the right values: */
|
|
|
|
VC_IMAGE_ARGB8888,
|
|
|
|
VC_IMAGE_XRGB8888,
|
|
|
|
VC_IMAGE_RGB565,
|
|
|
|
} VC_IMAGE_TYPE_T;
|
|
|
|
|
rpi: a backend for Raspberry Pi
Add a new backend for the Raspberry Pi.
This backend uses the DispmanX API to initialise the display, and create
an EGLSurface, so that GLESv2 rendering is shown on the "framebuffer".
No X server is involved. All compositing happens through GLESv2.
The created EGLSurface is specifically configured as buffer content
preserving, otherwise Weston wouuld show only the latest damage and
everything else was black. This may be sub-optimal, since we are not
alternating between two buffers, like the DRM backend is, and content
preserving may imply a fullscreen copy on each frame.
Page flips are not properly hooked up yet. The display update will
block, and we use a timer to call weston_output_finish_frame(), just
like the x11 backend does.
This backend handles the VT and tty just like the DRM backend does.
While VT switching works in theory, the display output seems to be
frozen while switched away from Weston. You can still switch back.
Seats and connectors cannot be explicitly specified, and multiple seats
are not expected.
Udev is used to find the input devices. Input devices are opened
directly, weston-launch is not supported at this time. You may need to
confirm that your pi user has access to input device nodes.
The Raspberry Pi backend is built by default. It can be build-tested
without the Raspberry Pi headers and libraries, because we provide stubs
in rpi-bcm-stubs.h, but such resulting binary is non-functional. If
using stubs, the backend is built but not installed.
VT and tty handling, and udev related code are pretty much copied from
the DRM backend, hence the copyrights. The rpi-bcm-stubs.h code is
copied from the headers on Raspberry Pi, including their copyright
notice, and modified.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
12 years ago
|
|
|
/* from /opt/vc/include/interface/vmcs_host/vc_dispmanx_types.h */
|
|
|
|
|
|
|
|
typedef uint32_t DISPMANX_DISPLAY_HANDLE_T;
|
|
|
|
typedef uint32_t DISPMANX_UPDATE_HANDLE_T;
|
|
|
|
typedef uint32_t DISPMANX_ELEMENT_HANDLE_T;
|
|
|
|
typedef uint32_t DISPMANX_RESOURCE_HANDLE_T;
|
|
|
|
typedef uint32_t DISPMANX_PROTECTION_T;
|
|
|
|
|
|
|
|
#define DISPMANX_NO_HANDLE 0
|
|
|
|
#define DISPMANX_PROTECTION_NONE 0
|
|
|
|
#define DISPMANX_ID_HDMI 2
|
|
|
|
|
|
|
|
typedef enum {
|
|
|
|
/* Bottom 2 bits sets the alpha mode */
|
|
|
|
DISPMANX_FLAGS_ALPHA_FROM_SOURCE = 0,
|
|
|
|
DISPMANX_FLAGS_ALPHA_FIXED_ALL_PIXELS = 1,
|
|
|
|
DISPMANX_FLAGS_ALPHA_FIXED_NON_ZERO = 2,
|
|
|
|
DISPMANX_FLAGS_ALPHA_FIXED_EXCEED_0X07 = 3,
|
|
|
|
|
|
|
|
DISPMANX_FLAGS_ALPHA_PREMULT = 1 << 16,
|
|
|
|
DISPMANX_FLAGS_ALPHA_MIX = 1 << 17
|
|
|
|
} DISPMANX_FLAGS_ALPHA_T;
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
DISPMANX_FLAGS_ALPHA_T flags;
|
|
|
|
uint32_t opacity;
|
|
|
|
DISPMANX_RESOURCE_HANDLE_T mask;
|
|
|
|
} VC_DISPMANX_ALPHA_T;
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
int32_t width;
|
|
|
|
int32_t height;
|
|
|
|
VC_IMAGE_TRANSFORM_T transform;
|
|
|
|
DISPLAY_INPUT_FORMAT_T input_format;
|
|
|
|
} DISPMANX_MODEINFO_T;
|
|
|
|
|
|
|
|
typedef enum {
|
|
|
|
DISPMANX_NO_ROTATE = 0,
|
rpi: add a Dispmanx renderer
Dispmanx is the prorietary display API on the Raspberry Pi, which
provides hardware compositing. Every visible surface is assigned a
Dispmanx element, and the hardware or firmware will do all compositing
onto screen. The API supports translation, scaling, flips, discrete
rotations in 90-degree steps, alpha channel on the surfaces, and
full-surface alpha on top.
Previously, Dispmanx capabilities were used via the weston_plane
mechanism, where surfaces were assigned to planes when possible, and
otherwise transparently falling back to GLESv2 compositing. Because we
have no way to use the same memory buffer as a GL texture and a Dispmanx
resource, we had to prepare for both. In the worst case, that means one GL
texture, and two (double-buffered case) Dispmanx resources, all the size
of a whole surface, for all surfaces. This was eating memory fast. To
make things worse (and less slow), the wl_shm buffer was kept around,
since it was copied to either a texture or a resource as needed. This
caused all clients to need two buffers. In a Dispmanx-only renderer, we
can drop the GL texture, and we can release wl_shm buffer immediately
after the first copy, so clients become effectively single-buffered. So
from the worst case of 5 buffers per surface, we go down to 3 or just
2 (single-buffered Dispmanx element, one wl_shm buffer in the client)
buffers per surface.
As this will replace the GL renderer on rpi, we cannot fall back to the
GLESv2 compositing anymore. We lose arbitrary surface rotation, but we
lose also the GL fallback, which caused glitches.
This patch depends on new RaspberryPi firmware. Older firmware may not
render ARGB surfaces correctly, solid color surfaces maybe cause a
performance hit, and the output may completely fail in case the firmware
does not fall back internal off-line compositing properly as needed.
This new rpi-renderer support surface translation and scaling, but not
rotation or transpose (not even in 90-deg steps). In theory, 90-deg step
surface rotation is possible to support. Output transformations are
supported, but flipped variants do not seem to work right.
As a detail, menus and other surfaces that are simply translated with
respect to another surface caused falling back to the GL renderer. The
rpi-renderer handles them directly.
This patch only adds the new renderer, but does not hook it up into use.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
12 years ago
|
|
|
DISPMANX_ROTATE_90 = 1,
|
|
|
|
DISPMANX_ROTATE_180 = 2,
|
|
|
|
DISPMANX_ROTATE_270 = 3,
|
|
|
|
|
|
|
|
DISPMANX_FLIP_HRIZ = 1 << 16,
|
|
|
|
DISPMANX_FLIP_VERT = 1 << 17
|
rpi: a backend for Raspberry Pi
Add a new backend for the Raspberry Pi.
This backend uses the DispmanX API to initialise the display, and create
an EGLSurface, so that GLESv2 rendering is shown on the "framebuffer".
No X server is involved. All compositing happens through GLESv2.
The created EGLSurface is specifically configured as buffer content
preserving, otherwise Weston wouuld show only the latest damage and
everything else was black. This may be sub-optimal, since we are not
alternating between two buffers, like the DRM backend is, and content
preserving may imply a fullscreen copy on each frame.
Page flips are not properly hooked up yet. The display update will
block, and we use a timer to call weston_output_finish_frame(), just
like the x11 backend does.
This backend handles the VT and tty just like the DRM backend does.
While VT switching works in theory, the display output seems to be
frozen while switched away from Weston. You can still switch back.
Seats and connectors cannot be explicitly specified, and multiple seats
are not expected.
Udev is used to find the input devices. Input devices are opened
directly, weston-launch is not supported at this time. You may need to
confirm that your pi user has access to input device nodes.
The Raspberry Pi backend is built by default. It can be build-tested
without the Raspberry Pi headers and libraries, because we provide stubs
in rpi-bcm-stubs.h, but such resulting binary is non-functional. If
using stubs, the backend is built but not installed.
VT and tty handling, and udev related code are pretty much copied from
the DRM backend, hence the copyrights. The rpi-bcm-stubs.h code is
copied from the headers on Raspberry Pi, including their copyright
notice, and modified.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
12 years ago
|
|
|
} DISPMANX_TRANSFORM_T;
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
uint32_t dummy;
|
|
|
|
} DISPMANX_CLAMP_T;
|
|
|
|
|
|
|
|
typedef void (*DISPMANX_CALLBACK_FUNC_T)(DISPMANX_UPDATE_HANDLE_T u,
|
|
|
|
void *arg);
|
|
|
|
|
rpi: a backend for Raspberry Pi
Add a new backend for the Raspberry Pi.
This backend uses the DispmanX API to initialise the display, and create
an EGLSurface, so that GLESv2 rendering is shown on the "framebuffer".
No X server is involved. All compositing happens through GLESv2.
The created EGLSurface is specifically configured as buffer content
preserving, otherwise Weston wouuld show only the latest damage and
everything else was black. This may be sub-optimal, since we are not
alternating between two buffers, like the DRM backend is, and content
preserving may imply a fullscreen copy on each frame.
Page flips are not properly hooked up yet. The display update will
block, and we use a timer to call weston_output_finish_frame(), just
like the x11 backend does.
This backend handles the VT and tty just like the DRM backend does.
While VT switching works in theory, the display output seems to be
frozen while switched away from Weston. You can still switch back.
Seats and connectors cannot be explicitly specified, and multiple seats
are not expected.
Udev is used to find the input devices. Input devices are opened
directly, weston-launch is not supported at this time. You may need to
confirm that your pi user has access to input device nodes.
The Raspberry Pi backend is built by default. It can be build-tested
without the Raspberry Pi headers and libraries, because we provide stubs
in rpi-bcm-stubs.h, but such resulting binary is non-functional. If
using stubs, the backend is built but not installed.
VT and tty handling, and udev related code are pretty much copied from
the DRM backend, hence the copyrights. The rpi-bcm-stubs.h code is
copied from the headers on Raspberry Pi, including their copyright
notice, and modified.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
12 years ago
|
|
|
/* from /opt/vc/include/interface/vmcs_host/vc_dispmanx.h */
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
vc_dispmanx_rect_set(VC_RECT_T *rect, uint32_t x_offset, uint32_t y_offset,
|
|
|
|
uint32_t width, uint32_t height)
|
|
|
|
{
|
|
|
|
rect->x = x_offset;
|
|
|
|
rect->y = y_offset;
|
|
|
|
rect->width = width;
|
|
|
|
rect->height = height;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline DISPMANX_RESOURCE_HANDLE_T
|
|
|
|
vc_dispmanx_resource_create(VC_IMAGE_TYPE_T type, uint32_t width,
|
|
|
|
uint32_t height, uint32_t *native_image_handle)
|
|
|
|
{
|
|
|
|
return DISPMANX_NO_HANDLE;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
vc_dispmanx_resource_write_data(DISPMANX_RESOURCE_HANDLE_T res,
|
|
|
|
VC_IMAGE_TYPE_T src_type,
|
|
|
|
int src_pitch,
|
|
|
|
void *src_address,
|
|
|
|
const VC_RECT_T *rect)
|
|
|
|
{
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
vc_dispmanx_resource_write_data_rect(DISPMANX_RESOURCE_HANDLE_T handle,
|
|
|
|
VC_IMAGE_TYPE_T src_type,
|
|
|
|
int src_pitch,
|
|
|
|
void *src_address,
|
|
|
|
const VC_RECT_T *src_rect,
|
|
|
|
uint32_t dst_x,
|
|
|
|
uint32_t dst_y)
|
|
|
|
{
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
rpi: add a Dispmanx renderer
Dispmanx is the prorietary display API on the Raspberry Pi, which
provides hardware compositing. Every visible surface is assigned a
Dispmanx element, and the hardware or firmware will do all compositing
onto screen. The API supports translation, scaling, flips, discrete
rotations in 90-degree steps, alpha channel on the surfaces, and
full-surface alpha on top.
Previously, Dispmanx capabilities were used via the weston_plane
mechanism, where surfaces were assigned to planes when possible, and
otherwise transparently falling back to GLESv2 compositing. Because we
have no way to use the same memory buffer as a GL texture and a Dispmanx
resource, we had to prepare for both. In the worst case, that means one GL
texture, and two (double-buffered case) Dispmanx resources, all the size
of a whole surface, for all surfaces. This was eating memory fast. To
make things worse (and less slow), the wl_shm buffer was kept around,
since it was copied to either a texture or a resource as needed. This
caused all clients to need two buffers. In a Dispmanx-only renderer, we
can drop the GL texture, and we can release wl_shm buffer immediately
after the first copy, so clients become effectively single-buffered. So
from the worst case of 5 buffers per surface, we go down to 3 or just
2 (single-buffered Dispmanx element, one wl_shm buffer in the client)
buffers per surface.
As this will replace the GL renderer on rpi, we cannot fall back to the
GLESv2 compositing anymore. We lose arbitrary surface rotation, but we
lose also the GL fallback, which caused glitches.
This patch depends on new RaspberryPi firmware. Older firmware may not
render ARGB surfaces correctly, solid color surfaces maybe cause a
performance hit, and the output may completely fail in case the firmware
does not fall back internal off-line compositing properly as needed.
This new rpi-renderer support surface translation and scaling, but not
rotation or transpose (not even in 90-deg steps). In theory, 90-deg step
surface rotation is possible to support. Output transformations are
supported, but flipped variants do not seem to work right.
As a detail, menus and other surfaces that are simply translated with
respect to another surface caused falling back to the GL renderer. The
rpi-renderer handles them directly.
This patch only adds the new renderer, but does not hook it up into use.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
12 years ago
|
|
|
static inline int
|
|
|
|
vc_dispmanx_resource_read_data(DISPMANX_RESOURCE_HANDLE_T handle,
|
|
|
|
const VC_RECT_T *p_rect,
|
|
|
|
void *dst_address,
|
|
|
|
uint32_t dst_pitch)
|
|
|
|
{
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
vc_dispmanx_resource_delete(DISPMANX_RESOURCE_HANDLE_T res)
|
|
|
|
{
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
rpi: a backend for Raspberry Pi
Add a new backend for the Raspberry Pi.
This backend uses the DispmanX API to initialise the display, and create
an EGLSurface, so that GLESv2 rendering is shown on the "framebuffer".
No X server is involved. All compositing happens through GLESv2.
The created EGLSurface is specifically configured as buffer content
preserving, otherwise Weston wouuld show only the latest damage and
everything else was black. This may be sub-optimal, since we are not
alternating between two buffers, like the DRM backend is, and content
preserving may imply a fullscreen copy on each frame.
Page flips are not properly hooked up yet. The display update will
block, and we use a timer to call weston_output_finish_frame(), just
like the x11 backend does.
This backend handles the VT and tty just like the DRM backend does.
While VT switching works in theory, the display output seems to be
frozen while switched away from Weston. You can still switch back.
Seats and connectors cannot be explicitly specified, and multiple seats
are not expected.
Udev is used to find the input devices. Input devices are opened
directly, weston-launch is not supported at this time. You may need to
confirm that your pi user has access to input device nodes.
The Raspberry Pi backend is built by default. It can be build-tested
without the Raspberry Pi headers and libraries, because we provide stubs
in rpi-bcm-stubs.h, but such resulting binary is non-functional. If
using stubs, the backend is built but not installed.
VT and tty handling, and udev related code are pretty much copied from
the DRM backend, hence the copyrights. The rpi-bcm-stubs.h code is
copied from the headers on Raspberry Pi, including their copyright
notice, and modified.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
12 years ago
|
|
|
static inline DISPMANX_DISPLAY_HANDLE_T
|
|
|
|
vc_dispmanx_display_open(uint32_t device)
|
|
|
|
{
|
|
|
|
return DISPMANX_NO_HANDLE;
|
rpi: a backend for Raspberry Pi
Add a new backend for the Raspberry Pi.
This backend uses the DispmanX API to initialise the display, and create
an EGLSurface, so that GLESv2 rendering is shown on the "framebuffer".
No X server is involved. All compositing happens through GLESv2.
The created EGLSurface is specifically configured as buffer content
preserving, otherwise Weston wouuld show only the latest damage and
everything else was black. This may be sub-optimal, since we are not
alternating between two buffers, like the DRM backend is, and content
preserving may imply a fullscreen copy on each frame.
Page flips are not properly hooked up yet. The display update will
block, and we use a timer to call weston_output_finish_frame(), just
like the x11 backend does.
This backend handles the VT and tty just like the DRM backend does.
While VT switching works in theory, the display output seems to be
frozen while switched away from Weston. You can still switch back.
Seats and connectors cannot be explicitly specified, and multiple seats
are not expected.
Udev is used to find the input devices. Input devices are opened
directly, weston-launch is not supported at this time. You may need to
confirm that your pi user has access to input device nodes.
The Raspberry Pi backend is built by default. It can be build-tested
without the Raspberry Pi headers and libraries, because we provide stubs
in rpi-bcm-stubs.h, but such resulting binary is non-functional. If
using stubs, the backend is built but not installed.
VT and tty handling, and udev related code are pretty much copied from
the DRM backend, hence the copyrights. The rpi-bcm-stubs.h code is
copied from the headers on Raspberry Pi, including their copyright
notice, and modified.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
12 years ago
|
|
|
}
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
vc_dispmanx_display_close(DISPMANX_DISPLAY_HANDLE_T display)
|
|
|
|
{
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
vc_dispmanx_display_get_info(DISPMANX_DISPLAY_HANDLE_T display,
|
|
|
|
DISPMANX_MODEINFO_T *pinfo)
|
|
|
|
{
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline DISPMANX_UPDATE_HANDLE_T
|
|
|
|
vc_dispmanx_update_start(int32_t priority)
|
|
|
|
{
|
|
|
|
return DISPMANX_NO_HANDLE;
|
rpi: a backend for Raspberry Pi
Add a new backend for the Raspberry Pi.
This backend uses the DispmanX API to initialise the display, and create
an EGLSurface, so that GLESv2 rendering is shown on the "framebuffer".
No X server is involved. All compositing happens through GLESv2.
The created EGLSurface is specifically configured as buffer content
preserving, otherwise Weston wouuld show only the latest damage and
everything else was black. This may be sub-optimal, since we are not
alternating between two buffers, like the DRM backend is, and content
preserving may imply a fullscreen copy on each frame.
Page flips are not properly hooked up yet. The display update will
block, and we use a timer to call weston_output_finish_frame(), just
like the x11 backend does.
This backend handles the VT and tty just like the DRM backend does.
While VT switching works in theory, the display output seems to be
frozen while switched away from Weston. You can still switch back.
Seats and connectors cannot be explicitly specified, and multiple seats
are not expected.
Udev is used to find the input devices. Input devices are opened
directly, weston-launch is not supported at this time. You may need to
confirm that your pi user has access to input device nodes.
The Raspberry Pi backend is built by default. It can be build-tested
without the Raspberry Pi headers and libraries, because we provide stubs
in rpi-bcm-stubs.h, but such resulting binary is non-functional. If
using stubs, the backend is built but not installed.
VT and tty handling, and udev related code are pretty much copied from
the DRM backend, hence the copyrights. The rpi-bcm-stubs.h code is
copied from the headers on Raspberry Pi, including their copyright
notice, and modified.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
12 years ago
|
|
|
}
|
|
|
|
|
|
|
|
static inline DISPMANX_ELEMENT_HANDLE_T
|
|
|
|
vc_dispmanx_element_add(DISPMANX_UPDATE_HANDLE_T update,
|
|
|
|
DISPMANX_DISPLAY_HANDLE_T display,
|
|
|
|
int32_t layer,
|
|
|
|
const VC_RECT_T *dest_rect,
|
|
|
|
DISPMANX_RESOURCE_HANDLE_T src,
|
|
|
|
const VC_RECT_T *src_rect,
|
|
|
|
DISPMANX_PROTECTION_T protection,
|
|
|
|
VC_DISPMANX_ALPHA_T *alpha,
|
|
|
|
DISPMANX_CLAMP_T *clamp,
|
|
|
|
DISPMANX_TRANSFORM_T transform)
|
|
|
|
{
|
|
|
|
return DISPMANX_NO_HANDLE;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
vc_dispmanx_element_change_source(DISPMANX_UPDATE_HANDLE_T update,
|
|
|
|
DISPMANX_ELEMENT_HANDLE_T element,
|
|
|
|
DISPMANX_RESOURCE_HANDLE_T src)
|
|
|
|
{
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
vc_dispmanx_element_modified(DISPMANX_UPDATE_HANDLE_T update,
|
|
|
|
DISPMANX_ELEMENT_HANDLE_T element,
|
|
|
|
const VC_RECT_T *rect)
|
rpi: a backend for Raspberry Pi
Add a new backend for the Raspberry Pi.
This backend uses the DispmanX API to initialise the display, and create
an EGLSurface, so that GLESv2 rendering is shown on the "framebuffer".
No X server is involved. All compositing happens through GLESv2.
The created EGLSurface is specifically configured as buffer content
preserving, otherwise Weston wouuld show only the latest damage and
everything else was black. This may be sub-optimal, since we are not
alternating between two buffers, like the DRM backend is, and content
preserving may imply a fullscreen copy on each frame.
Page flips are not properly hooked up yet. The display update will
block, and we use a timer to call weston_output_finish_frame(), just
like the x11 backend does.
This backend handles the VT and tty just like the DRM backend does.
While VT switching works in theory, the display output seems to be
frozen while switched away from Weston. You can still switch back.
Seats and connectors cannot be explicitly specified, and multiple seats
are not expected.
Udev is used to find the input devices. Input devices are opened
directly, weston-launch is not supported at this time. You may need to
confirm that your pi user has access to input device nodes.
The Raspberry Pi backend is built by default. It can be build-tested
without the Raspberry Pi headers and libraries, because we provide stubs
in rpi-bcm-stubs.h, but such resulting binary is non-functional. If
using stubs, the backend is built but not installed.
VT and tty handling, and udev related code are pretty much copied from
the DRM backend, hence the copyrights. The rpi-bcm-stubs.h code is
copied from the headers on Raspberry Pi, including their copyright
notice, and modified.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
12 years ago
|
|
|
{
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
vc_dispmanx_element_remove(DISPMANX_UPDATE_HANDLE_T update,
|
|
|
|
DISPMANX_ELEMENT_HANDLE_T element)
|
|
|
|
{
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
vc_dispmanx_update_submit(DISPMANX_UPDATE_HANDLE_T update,
|
|
|
|
DISPMANX_CALLBACK_FUNC_T cb_func, void *cb_arg)
|
|
|
|
{
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
rpi: a backend for Raspberry Pi
Add a new backend for the Raspberry Pi.
This backend uses the DispmanX API to initialise the display, and create
an EGLSurface, so that GLESv2 rendering is shown on the "framebuffer".
No X server is involved. All compositing happens through GLESv2.
The created EGLSurface is specifically configured as buffer content
preserving, otherwise Weston wouuld show only the latest damage and
everything else was black. This may be sub-optimal, since we are not
alternating between two buffers, like the DRM backend is, and content
preserving may imply a fullscreen copy on each frame.
Page flips are not properly hooked up yet. The display update will
block, and we use a timer to call weston_output_finish_frame(), just
like the x11 backend does.
This backend handles the VT and tty just like the DRM backend does.
While VT switching works in theory, the display output seems to be
frozen while switched away from Weston. You can still switch back.
Seats and connectors cannot be explicitly specified, and multiple seats
are not expected.
Udev is used to find the input devices. Input devices are opened
directly, weston-launch is not supported at this time. You may need to
confirm that your pi user has access to input device nodes.
The Raspberry Pi backend is built by default. It can be build-tested
without the Raspberry Pi headers and libraries, because we provide stubs
in rpi-bcm-stubs.h, but such resulting binary is non-functional. If
using stubs, the backend is built but not installed.
VT and tty handling, and udev related code are pretty much copied from
the DRM backend, hence the copyrights. The rpi-bcm-stubs.h code is
copied from the headers on Raspberry Pi, including their copyright
notice, and modified.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
12 years ago
|
|
|
static inline int
|
|
|
|
vc_dispmanx_update_submit_sync(DISPMANX_UPDATE_HANDLE_T update)
|
|
|
|
{
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
vc_dispmanx_element_change_attributes(DISPMANX_UPDATE_HANDLE_T update,
|
|
|
|
DISPMANX_ELEMENT_HANDLE_T element,
|
|
|
|
uint32_t change_flags,
|
|
|
|
int32_t layer,
|
|
|
|
uint8_t opacity,
|
|
|
|
const VC_RECT_T *dest_rect,
|
|
|
|
const VC_RECT_T *src_rect,
|
|
|
|
DISPMANX_RESOURCE_HANDLE_T mask,
|
|
|
|
VC_IMAGE_TRANSFORM_T transform)
|
|
|
|
{
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
rpi: add a Dispmanx renderer
Dispmanx is the prorietary display API on the Raspberry Pi, which
provides hardware compositing. Every visible surface is assigned a
Dispmanx element, and the hardware or firmware will do all compositing
onto screen. The API supports translation, scaling, flips, discrete
rotations in 90-degree steps, alpha channel on the surfaces, and
full-surface alpha on top.
Previously, Dispmanx capabilities were used via the weston_plane
mechanism, where surfaces were assigned to planes when possible, and
otherwise transparently falling back to GLESv2 compositing. Because we
have no way to use the same memory buffer as a GL texture and a Dispmanx
resource, we had to prepare for both. In the worst case, that means one GL
texture, and two (double-buffered case) Dispmanx resources, all the size
of a whole surface, for all surfaces. This was eating memory fast. To
make things worse (and less slow), the wl_shm buffer was kept around,
since it was copied to either a texture or a resource as needed. This
caused all clients to need two buffers. In a Dispmanx-only renderer, we
can drop the GL texture, and we can release wl_shm buffer immediately
after the first copy, so clients become effectively single-buffered. So
from the worst case of 5 buffers per surface, we go down to 3 or just
2 (single-buffered Dispmanx element, one wl_shm buffer in the client)
buffers per surface.
As this will replace the GL renderer on rpi, we cannot fall back to the
GLESv2 compositing anymore. We lose arbitrary surface rotation, but we
lose also the GL fallback, which caused glitches.
This patch depends on new RaspberryPi firmware. Older firmware may not
render ARGB surfaces correctly, solid color surfaces maybe cause a
performance hit, and the output may completely fail in case the firmware
does not fall back internal off-line compositing properly as needed.
This new rpi-renderer support surface translation and scaling, but not
rotation or transpose (not even in 90-deg steps). In theory, 90-deg step
surface rotation is possible to support. Output transformations are
supported, but flipped variants do not seem to work right.
As a detail, menus and other surfaces that are simply translated with
respect to another surface caused falling back to the GL renderer. The
rpi-renderer handles them directly.
This patch only adds the new renderer, but does not hook it up into use.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
12 years ago
|
|
|
static inline int
|
|
|
|
vc_dispmanx_snapshot(DISPMANX_DISPLAY_HANDLE_T display,
|
|
|
|
DISPMANX_RESOURCE_HANDLE_T snapshot_resource,
|
|
|
|
VC_IMAGE_TRANSFORM_T transform)
|
|
|
|
{
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
rpi: a backend for Raspberry Pi
Add a new backend for the Raspberry Pi.
This backend uses the DispmanX API to initialise the display, and create
an EGLSurface, so that GLESv2 rendering is shown on the "framebuffer".
No X server is involved. All compositing happens through GLESv2.
The created EGLSurface is specifically configured as buffer content
preserving, otherwise Weston wouuld show only the latest damage and
everything else was black. This may be sub-optimal, since we are not
alternating between two buffers, like the DRM backend is, and content
preserving may imply a fullscreen copy on each frame.
Page flips are not properly hooked up yet. The display update will
block, and we use a timer to call weston_output_finish_frame(), just
like the x11 backend does.
This backend handles the VT and tty just like the DRM backend does.
While VT switching works in theory, the display output seems to be
frozen while switched away from Weston. You can still switch back.
Seats and connectors cannot be explicitly specified, and multiple seats
are not expected.
Udev is used to find the input devices. Input devices are opened
directly, weston-launch is not supported at this time. You may need to
confirm that your pi user has access to input device nodes.
The Raspberry Pi backend is built by default. It can be build-tested
without the Raspberry Pi headers and libraries, because we provide stubs
in rpi-bcm-stubs.h, but such resulting binary is non-functional. If
using stubs, the backend is built but not installed.
VT and tty handling, and udev related code are pretty much copied from
the DRM backend, hence the copyrights. The rpi-bcm-stubs.h code is
copied from the headers on Raspberry Pi, including their copyright
notice, and modified.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
12 years ago
|
|
|
/* from /opt/vc/include/EGL/eglplatform.h */
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
DISPMANX_ELEMENT_HANDLE_T element;
|
|
|
|
int width;
|
|
|
|
int height;
|
|
|
|
} EGL_DISPMANX_WINDOW_T;
|
|
|
|
|
|
|
|
#endif /* RPI_BCM_STUBS */
|