From 0d64a0fa2957f96d5530eef37a7cc4e30c0a391b Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Tue, 11 Sep 2012 17:02:05 +0300 Subject: [PATCH] compositor: new intersection algorithm The existing algorithm had some corner cases (pun!), where it failed to produce correct vertices in the right order. This appeared only when the surface was transformed (rotated). It also produced degenerate polygons (3 or more vertices with zero polygon area) for non-transformed cases where the clipping and surface rectangles were adjacent but not overlapping. Introduce a new algorithm for finding the boundary vertices of the intersection of a coordinate axis aligned rectangle and an arbitrary polygon (here a quadrilateral). The code is based on the Sutherland-Hodgman algorithm, where a polygon is clipped by infinite lines one at a time. This new algorithm should always produce the correct vertices in the clockwise winding order, and discard duplicate vertices and degenerate polygons. It retains the fast paths of the existing algorithm for the no-hit and non-transformed cases. Benchmarking with earlier versions showed that the new algorithm is a little slower (56 vs. 68 us/call) than the existing algorithm, for the transformed case. The 'cliptest f' command before and after this commit can be used to compare the speed of the transformed case only. Signed-off-by: Pekka Paalanen Acked-by: Rob Clark --- clients/cliptest.c | 578 +++++++++++++++++++++++------------------- src/gles2-renderer.c | 579 ++++++++++++++++++++++++------------------- 2 files changed, 653 insertions(+), 504 deletions(-) diff --git a/clients/cliptest.c b/clients/cliptest.c index ff18757e..4dd43805 100644 --- a/clients/cliptest.c +++ b/clients/cliptest.c @@ -81,65 +81,320 @@ weston_surface_to_global_float(struct weston_surface *surface, /* ---------------------- copied begins -----------------------*/ +struct polygon8 { + GLfloat x[8]; + GLfloat y[8]; + int n; +}; + +struct clip_context { + struct { + GLfloat x; + GLfloat y; + } prev; + + struct { + GLfloat x1, y1; + GLfloat x2, y2; + } clip; + + struct { + GLfloat *x; + GLfloat *y; + } vertices; +}; + +static GLfloat +float_difference(GLfloat a, GLfloat b) +{ + /* http://www.altdevblogaday.com/2012/02/22/comparing-floating-point-numbers-2012-edition/ */ + static const GLfloat max_diff = 4.0f * FLT_MIN; + static const GLfloat max_rel_diff = 4.0e-5; + GLfloat diff = a - b; + GLfloat adiff = fabsf(diff); + + if (adiff <= max_diff) + return 0.0f; + + a = fabsf(a); + b = fabsf(b); + if (adiff <= (a > b ? a : b) * max_rel_diff) + return 0.0f; + + return diff; +} + +/* A line segment (p1x, p1y)-(p2x, p2y) intersects the line x = x_arg. + * Compute the y coordinate of the intersection. + */ +static GLfloat +clip_intersect_y(GLfloat p1x, GLfloat p1y, GLfloat p2x, GLfloat p2y, + GLfloat x_arg) +{ + GLfloat a; + GLfloat diff = float_difference(p1x, p2x); + + /* Practically vertical line segment, yet the end points have already + * been determined to be on different sides of the line. Therefore + * the line segment is part of the line and intersects everywhere. + * Return the end point, so we use the whole line segment. + */ + if (diff == 0.0f) + return p2y; + + a = (x_arg - p2x) / diff; + return p2y + (p1y - p2y) * a; +} + +/* A line segment (p1x, p1y)-(p2x, p2y) intersects the line y = y_arg. + * Compute the x coordinate of the intersection. + */ +static GLfloat +clip_intersect_x(GLfloat p1x, GLfloat p1y, GLfloat p2x, GLfloat p2y, + GLfloat y_arg) +{ + GLfloat a; + GLfloat diff = float_difference(p1y, p2y); + + /* Practically horizontal line segment, yet the end points have already + * been determined to be on different sides of the line. Therefore + * the line segment is part of the line and intersects everywhere. + * Return the end point, so we use the whole line segment. + */ + if (diff == 0.0f) + return p2x; + + a = (y_arg - p2y) / diff; + return p2x + (p1x - p2x) * a; +} + +enum path_transition { + PATH_TRANSITION_OUT_TO_OUT = 0, + PATH_TRANSITION_OUT_TO_IN = 1, + PATH_TRANSITION_IN_TO_OUT = 2, + PATH_TRANSITION_IN_TO_IN = 3, +}; + +static void +clip_append_vertex(struct clip_context *ctx, GLfloat x, GLfloat y) +{ + *ctx->vertices.x++ = x; + *ctx->vertices.y++ = y; +} + +static enum path_transition +path_transition_left_edge(struct clip_context *ctx, GLfloat x, GLfloat y) +{ + return ((ctx->prev.x >= ctx->clip.x1) << 1) | (x >= ctx->clip.x1); +} + +static enum path_transition +path_transition_right_edge(struct clip_context *ctx, GLfloat x, GLfloat y) +{ + return ((ctx->prev.x < ctx->clip.x2) << 1) | (x < ctx->clip.x2); +} + +static enum path_transition +path_transition_top_edge(struct clip_context *ctx, GLfloat x, GLfloat y) +{ + return ((ctx->prev.y >= ctx->clip.y1) << 1) | (y >= ctx->clip.y1); +} + +static enum path_transition +path_transition_bottom_edge(struct clip_context *ctx, GLfloat x, GLfloat y) +{ + return ((ctx->prev.y < ctx->clip.y2) << 1) | (y < ctx->clip.y2); +} + +static void +clip_polygon_leftright(struct clip_context *ctx, + enum path_transition transition, + GLfloat x, GLfloat y, GLfloat clip_x) +{ + GLfloat yi; + + switch (transition) { + case PATH_TRANSITION_IN_TO_IN: + clip_append_vertex(ctx, x, y); + break; + case PATH_TRANSITION_IN_TO_OUT: + yi = clip_intersect_y(ctx->prev.x, ctx->prev.y, x, y, clip_x); + clip_append_vertex(ctx, clip_x, yi); + break; + case PATH_TRANSITION_OUT_TO_IN: + yi = clip_intersect_y(ctx->prev.x, ctx->prev.y, x, y, clip_x); + clip_append_vertex(ctx, clip_x, yi); + clip_append_vertex(ctx, x, y); + break; + case PATH_TRANSITION_OUT_TO_OUT: + /* nothing */ + break; + default: + assert(0 && "bad enum path_transition"); + } + + ctx->prev.x = x; + ctx->prev.y = y; +} + +static void +clip_polygon_topbottom(struct clip_context *ctx, + enum path_transition transition, + GLfloat x, GLfloat y, GLfloat clip_y) +{ + GLfloat xi; + + switch (transition) { + case PATH_TRANSITION_IN_TO_IN: + clip_append_vertex(ctx, x, y); + break; + case PATH_TRANSITION_IN_TO_OUT: + xi = clip_intersect_x(ctx->prev.x, ctx->prev.y, x, y, clip_y); + clip_append_vertex(ctx, xi, clip_y); + break; + case PATH_TRANSITION_OUT_TO_IN: + xi = clip_intersect_x(ctx->prev.x, ctx->prev.y, x, y, clip_y); + clip_append_vertex(ctx, xi, clip_y); + clip_append_vertex(ctx, x, y); + break; + case PATH_TRANSITION_OUT_TO_OUT: + /* nothing */ + break; + default: + assert(0 && "bad enum path_transition"); + } + + ctx->prev.x = x; + ctx->prev.y = y; +} + +static void +clip_context_prepare(struct clip_context *ctx, const struct polygon8 *src, + GLfloat *dst_x, GLfloat *dst_y) +{ + ctx->prev.x = src->x[src->n - 1]; + ctx->prev.y = src->y[src->n - 1]; + ctx->vertices.x = dst_x; + ctx->vertices.y = dst_y; +} + +static int +clip_polygon_left(struct clip_context *ctx, const struct polygon8 *src, + GLfloat *dst_x, GLfloat *dst_y) +{ + enum path_transition trans; + int i; + + clip_context_prepare(ctx, src, dst_x, dst_y); + for (i = 0; i < src->n; i++) { + trans = path_transition_left_edge(ctx, src->x[i], src->y[i]); + clip_polygon_leftright(ctx, trans, src->x[i], src->y[i], + ctx->clip.x1); + } + return ctx->vertices.x - dst_x; +} + +static int +clip_polygon_right(struct clip_context *ctx, const struct polygon8 *src, + GLfloat *dst_x, GLfloat *dst_y) +{ + enum path_transition trans; + int i; + + clip_context_prepare(ctx, src, dst_x, dst_y); + for (i = 0; i < src->n; i++) { + trans = path_transition_right_edge(ctx, src->x[i], src->y[i]); + clip_polygon_leftright(ctx, trans, src->x[i], src->y[i], + ctx->clip.x2); + } + return ctx->vertices.x - dst_x; +} + +static int +clip_polygon_top(struct clip_context *ctx, const struct polygon8 *src, + GLfloat *dst_x, GLfloat *dst_y) +{ + enum path_transition trans; + int i; + + clip_context_prepare(ctx, src, dst_x, dst_y); + for (i = 0; i < src->n; i++) { + trans = path_transition_top_edge(ctx, src->x[i], src->y[i]); + clip_polygon_topbottom(ctx, trans, src->x[i], src->y[i], + ctx->clip.y1); + } + return ctx->vertices.x - dst_x; +} + +static int +clip_polygon_bottom(struct clip_context *ctx, const struct polygon8 *src, + GLfloat *dst_x, GLfloat *dst_y) +{ + enum path_transition trans; + int i; + + clip_context_prepare(ctx, src, dst_x, dst_y); + for (i = 0; i < src->n; i++) { + trans = path_transition_bottom_edge(ctx, src->x[i], src->y[i]); + clip_polygon_topbottom(ctx, trans, src->x[i], src->y[i], + ctx->clip.y2); + } + return ctx->vertices.x - dst_x; +} + #define max(a, b) (((a) > (b)) ? (a) : (b)) #define min(a, b) (((a) > (b)) ? (b) : (a)) #define clip(x, a, b) min(max(x, a), b) -#define sign(x) ((x) >= 0) +/* + * Compute the boundary vertices of the intersection of the global coordinate + * aligned rectangle 'rect', and an arbitrary quadrilateral produced from + * 'surf_rect' when transformed from surface coordinates into global coordinates. + * The vertices are written to 'ex' and 'ey', and the return value is the + * number of vertices. Vertices are produced in clockwise winding order. + * Guarantees to produce either zero vertices, or 3-8 vertices with non-zero + * polygon area. + */ static int calculate_edges(struct weston_surface *es, pixman_box32_t *rect, pixman_box32_t *surf_rect, GLfloat *ex, GLfloat *ey) { - int i, n = 0; + struct polygon8 polygon; + struct clip_context ctx; + int i, n; GLfloat min_x, max_x, min_y, max_y; - GLfloat x[4] = { - surf_rect->x1, surf_rect->x2, surf_rect->x2, surf_rect->x1, + struct polygon8 surf = { + { surf_rect->x1, surf_rect->x2, surf_rect->x2, surf_rect->x1 }, + { surf_rect->y1, surf_rect->y1, surf_rect->y2, surf_rect->y2 }, + 4 }; - GLfloat y[4] = { - surf_rect->y1, surf_rect->y1, surf_rect->y2, surf_rect->y2, - }; - GLfloat cx1 = rect->x1; - GLfloat cx2 = rect->x2; - GLfloat cy1 = rect->y1; - GLfloat cy2 = rect->y2; - - GLfloat dist_squared(GLfloat x1, GLfloat y1, GLfloat x2, GLfloat y2) - { - GLfloat dx = (x1 - x2); - GLfloat dy = (y1 - y2); - return dx * dx + dy * dy; - } - void append_vertex(GLfloat x, GLfloat y) - { - /* don't emit duplicate vertices: */ - if ((n > 0) && (ex[n-1] == x) && (ey[n-1] == y)) - return; - ex[n] = x; - ey[n] = y; - n++; - } + ctx.clip.x1 = rect->x1; + ctx.clip.y1 = rect->y1; + ctx.clip.x2 = rect->x2; + ctx.clip.y2 = rect->y2; /* transform surface to screen space: */ - for (i = 0; i < 4; i++) - weston_surface_to_global_float(es, x[i], y[i], &x[i], &y[i]); + for (i = 0; i < surf.n; i++) + weston_surface_to_global_float(es, surf.x[i], surf.y[i], + &surf.x[i], &surf.y[i]); /* find bounding box: */ - min_x = max_x = x[0]; - min_y = max_y = y[0]; - - for (i = 1; i < 4; i++) { - min_x = min(min_x, x[i]); - max_x = max(max_x, x[i]); - min_y = min(min_y, y[i]); - max_y = max(max_y, y[i]); + min_x = max_x = surf.x[0]; + min_y = max_y = surf.y[0]; + + for (i = 1; i < surf.n; i++) { + min_x = min(min_x, surf.x[i]); + max_x = max(max_x, surf.x[i]); + min_y = min(min_y, surf.y[i]); + max_y = max(max_y, surf.y[i]); } /* First, simple bounding box check to discard early transformed * surface rects that do not intersect with the clip region: */ - if ((min_x > cx2) || (max_x < cx1) || - (min_y > cy2) || (max_y < cy1)) + if ((min_x >= ctx.clip.x2) || (max_x <= ctx.clip.x1) || + (min_y >= ctx.clip.y2) || (max_y <= ctx.clip.y1)) return 0; /* Simple case, bounding box edges are parallel to surface edges, @@ -147,228 +402,47 @@ calculate_edges(struct weston_surface *es, pixman_box32_t *rect, * vertices to the clip rect bounds: */ if (!es->transform.enabled) { - for (i = 0; i < 4; i++) { - ex[n] = clip(x[i], cx1, cx2); - ey[n] = clip(y[i], cy1, cy2); - n++; + for (i = 0; i < surf.n; i++) { + ex[i] = clip(surf.x[i], ctx.clip.x1, ctx.clip.x2); + ey[i] = clip(surf.y[i], ctx.clip.y1, ctx.clip.y2); } - return 4; + return surf.n; } - /* Hard case, transformation applied. We need to find the vertices - * of the shape that is the intersection of the clip rect and - * transformed surface. This can be anything from 3 to 8 sides. - * - * Observation: all the resulting vertices will be the intersection - * points of the transformed surface and the clip rect, plus the - * vertices of the clip rect which are enclosed by the transformed - * surface and the vertices of the transformed surface which are - * enclosed by the clip rect. - * - * Observation: there will be zero, one, or two resulting vertices - * for each edge of the src rect. - * - * Loop over four edges of the transformed rect: + /* Transformed case: use a general polygon clipping algorithm to + * clip the surface rectangle with each side of 'rect'. + * The algorithm is Sutherland-Hodgman, as explained in + * http://www.codeguru.com/cpp/misc/misc/graphics/article.php/c8965/Polygon-Clipping.htm + * but without looking at any of that code. */ - for (i = 0; i < 4; i++) { - GLfloat x1, y1, x2, y2; - int last_n = n; - - x1 = x[i]; - y1 = y[i]; - - /* if this vertex is contained in the clip rect, use it as-is: */ - if ((cx1 <= x1) && (x1 <= cx2) && - (cy1 <= y1) && (y1 <= cy2)) - append_vertex(x1, y1); - - /* for remaining, we consider the point as part of a line: */ - x2 = x[(i+1) % 4]; - y2 = y[(i+1) % 4]; - - if (x1 == x2) { - append_vertex(clip(x1, cx1, cx2), clip(y1, cy1, cy2)); - append_vertex(clip(x2, cx1, cx2), clip(y2, cy1, cy2)); - } else if (y1 == y2) { - append_vertex(clip(x1, cx1, cx2), clip(y1, cy1, cy2)); - append_vertex(clip(x2, cx1, cx2), clip(y2, cy1, cy2)); - } else { - GLfloat m, c, p; - GLfloat tx[2], ty[2]; - int tn = 0; - - int intersect_horiz(GLfloat y, GLfloat *p) - { - GLfloat x; - - /* if y does not lie between y1 and y2, no - * intersection possible - */ - if (sign(y-y1) == sign(y-y2)) - return 0; - - x = (y - c) / m; - - /* if x does not lie between cx1 and cx2, no - * intersection: - */ - if (sign(x-cx1) == sign(x-cx2)) - return 0; - - *p = x; - return 1; - } - - int intersect_vert(GLfloat x, GLfloat *p) - { - GLfloat y; - - if (sign(x-x1) == sign(x-x2)) - return 0; - - y = m * x + c; - - if (sign(y-cy1) == sign(y-cy2)) - return 0; - - *p = y; - return 1; - } - - /* y = mx + c */ - m = (y2 - y1) / (x2 - x1); - c = y1 - m * x1; - - /* check for up to two intersections with the four edges - * of the clip rect. Note that we don't know the orientation - * of the transformed surface wrt. the clip rect. So if when - * there are two intersection points, we need to put the one - * closest to x1,y1 first: - */ - - /* check top clip rect edge: */ - if (intersect_horiz(cy1, &p)) { - ty[tn] = cy1; - tx[tn] = p; - tn++; - } - - /* check right clip rect edge: */ - if (intersect_vert(cx2, &p)) { - ty[tn] = p; - tx[tn] = cx2; - tn++; - if (tn == 2) - goto edge_check_done; - } - - /* check bottom clip rect edge: */ - if (intersect_horiz(cy2, &p)) { - ty[tn] = cy2; - tx[tn] = p; - tn++; - if (tn == 2) - goto edge_check_done; - } - - /* check left clip rect edge: */ - if (intersect_vert(cx1, &p)) { - ty[tn] = p; - tx[tn] = cx1; - tn++; - } - -edge_check_done: - if (tn == 1) { - append_vertex(tx[0], ty[0]); - } else if (tn == 2) { - if (dist_squared(x1, y1, tx[0], ty[0]) < - dist_squared(x1, y1, tx[1], ty[1])) { - append_vertex(tx[0], ty[0]); - append_vertex(tx[1], ty[1]); - } else { - append_vertex(tx[1], ty[1]); - append_vertex(tx[0], ty[0]); - } - } - - if (n == last_n) { - GLfloat best_x=0, best_y=0; - uint32_t d, best_d = (unsigned int)-1; /* distance squared */ - uint32_t max_d = dist_squared(x2, y2, - x[(i+2) % 4], y[(i+2) % 4]); - - /* if there are no vertices on this line, it could be that - * there is a vertex of the clip rect that is enclosed by - * the transformed surface. Find the vertex of the clip - * rect that is reached by the shortest line perpendicular - * to the current edge, if any. - * - * slope of perpendicular is 1/m, so - * - * cy = -cx/m + c2 - * c2 = cy + cx/m - * - */ - - int perp_intersect(GLfloat cx, GLfloat cy, uint32_t *d) - { - GLfloat c2 = cy + cx/m; - GLfloat x = (c2 - c) / (m + 1/m); - - /* if the x position of the intersection of the - * perpendicular with the transformed edge does - * not lie within the bounds of the edge, then - * no intersection: - */ - if (sign(x-x1) == sign(x-x2)) - return 0; - - *d = dist_squared(cx, cy, x, (m * x) + c); - - /* if intersection distance is further away than - * opposite edge of surface region, it is invalid: - */ - if (*d > max_d) - return 0; - - return 1; - } - - if (perp_intersect(cx1, cy1, &d)) { - best_x = cx1; - best_y = cy1; - best_d = d; - } - - if (perp_intersect(cx1, cy2, &d) && (d < best_d)) { - best_x = cx1; - best_y = cy2; - best_d = d; - } - - if (perp_intersect(cx2, cy2, &d) && (d < best_d)) { - best_x = cx2; - best_y = cy2; - best_d = d; - } - - if (perp_intersect(cx2, cy1, &d) && (d < best_d)) { - best_x = cx2; - best_y = cy1; - best_d = d; - } - - if (best_d != (unsigned int)-1) // XXX can this happen? - append_vertex(best_x, best_y); - } - } - + polygon.n = clip_polygon_left(&ctx, &surf, polygon.x, polygon.y); + surf.n = clip_polygon_right(&ctx, &polygon, surf.x, surf.y); + polygon.n = clip_polygon_top(&ctx, &surf, polygon.x, polygon.y); + surf.n = clip_polygon_bottom(&ctx, &polygon, surf.x, surf.y); + + /* Get rid of duplicate vertices */ + ex[0] = surf.x[0]; + ey[0] = surf.y[0]; + n = 1; + for (i = 1; i < surf.n; i++) { + if (float_difference(ex[n - 1], surf.x[i]) == 0.0f && + float_difference(ey[n - 1], surf.y[i]) == 0.0f) + continue; + ex[n] = surf.x[i]; + ey[n] = surf.y[i]; + n++; } + if (float_difference(ex[n - 1], surf.x[0]) == 0.0f && + float_difference(ey[n - 1], surf.y[0]) == 0.0f) + n--; + + if (n < 3) + return 0; return n; } + /* ---------------------- copied ends -----------------------*/ static void diff --git a/src/gles2-renderer.c b/src/gles2-renderer.c index a19c8c5d..0e8b8cef 100644 --- a/src/gles2-renderer.c +++ b/src/gles2-renderer.c @@ -25,6 +25,8 @@ #include #include #include +#include +#include #include "compositor.h" @@ -64,65 +66,320 @@ print_egl_error_state(void) egl_error_string(code), (long)code); } +struct polygon8 { + GLfloat x[8]; + GLfloat y[8]; + int n; +}; + +struct clip_context { + struct { + GLfloat x; + GLfloat y; + } prev; + + struct { + GLfloat x1, y1; + GLfloat x2, y2; + } clip; + + struct { + GLfloat *x; + GLfloat *y; + } vertices; +}; + +static GLfloat +float_difference(GLfloat a, GLfloat b) +{ + /* http://www.altdevblogaday.com/2012/02/22/comparing-floating-point-numbers-2012-edition/ */ + static const GLfloat max_diff = 4.0f * FLT_MIN; + static const GLfloat max_rel_diff = 4.0e-5; + GLfloat diff = a - b; + GLfloat adiff = fabsf(diff); + + if (adiff <= max_diff) + return 0.0f; + + a = fabsf(a); + b = fabsf(b); + if (adiff <= (a > b ? a : b) * max_rel_diff) + return 0.0f; + + return diff; +} + +/* A line segment (p1x, p1y)-(p2x, p2y) intersects the line x = x_arg. + * Compute the y coordinate of the intersection. + */ +static GLfloat +clip_intersect_y(GLfloat p1x, GLfloat p1y, GLfloat p2x, GLfloat p2y, + GLfloat x_arg) +{ + GLfloat a; + GLfloat diff = float_difference(p1x, p2x); + + /* Practically vertical line segment, yet the end points have already + * been determined to be on different sides of the line. Therefore + * the line segment is part of the line and intersects everywhere. + * Return the end point, so we use the whole line segment. + */ + if (diff == 0.0f) + return p2y; + + a = (x_arg - p2x) / diff; + return p2y + (p1y - p2y) * a; +} + +/* A line segment (p1x, p1y)-(p2x, p2y) intersects the line y = y_arg. + * Compute the x coordinate of the intersection. + */ +static GLfloat +clip_intersect_x(GLfloat p1x, GLfloat p1y, GLfloat p2x, GLfloat p2y, + GLfloat y_arg) +{ + GLfloat a; + GLfloat diff = float_difference(p1y, p2y); + + /* Practically horizontal line segment, yet the end points have already + * been determined to be on different sides of the line. Therefore + * the line segment is part of the line and intersects everywhere. + * Return the end point, so we use the whole line segment. + */ + if (diff == 0.0f) + return p2x; + + a = (y_arg - p2y) / diff; + return p2x + (p1x - p2x) * a; +} + +enum path_transition { + PATH_TRANSITION_OUT_TO_OUT = 0, + PATH_TRANSITION_OUT_TO_IN = 1, + PATH_TRANSITION_IN_TO_OUT = 2, + PATH_TRANSITION_IN_TO_IN = 3, +}; + +static void +clip_append_vertex(struct clip_context *ctx, GLfloat x, GLfloat y) +{ + *ctx->vertices.x++ = x; + *ctx->vertices.y++ = y; +} + +static enum path_transition +path_transition_left_edge(struct clip_context *ctx, GLfloat x, GLfloat y) +{ + return ((ctx->prev.x >= ctx->clip.x1) << 1) | (x >= ctx->clip.x1); +} + +static enum path_transition +path_transition_right_edge(struct clip_context *ctx, GLfloat x, GLfloat y) +{ + return ((ctx->prev.x < ctx->clip.x2) << 1) | (x < ctx->clip.x2); +} + +static enum path_transition +path_transition_top_edge(struct clip_context *ctx, GLfloat x, GLfloat y) +{ + return ((ctx->prev.y >= ctx->clip.y1) << 1) | (y >= ctx->clip.y1); +} + +static enum path_transition +path_transition_bottom_edge(struct clip_context *ctx, GLfloat x, GLfloat y) +{ + return ((ctx->prev.y < ctx->clip.y2) << 1) | (y < ctx->clip.y2); +} + +static void +clip_polygon_leftright(struct clip_context *ctx, + enum path_transition transition, + GLfloat x, GLfloat y, GLfloat clip_x) +{ + GLfloat yi; + + switch (transition) { + case PATH_TRANSITION_IN_TO_IN: + clip_append_vertex(ctx, x, y); + break; + case PATH_TRANSITION_IN_TO_OUT: + yi = clip_intersect_y(ctx->prev.x, ctx->prev.y, x, y, clip_x); + clip_append_vertex(ctx, clip_x, yi); + break; + case PATH_TRANSITION_OUT_TO_IN: + yi = clip_intersect_y(ctx->prev.x, ctx->prev.y, x, y, clip_x); + clip_append_vertex(ctx, clip_x, yi); + clip_append_vertex(ctx, x, y); + break; + case PATH_TRANSITION_OUT_TO_OUT: + /* nothing */ + break; + default: + assert(0 && "bad enum path_transition"); + } + + ctx->prev.x = x; + ctx->prev.y = y; +} + +static void +clip_polygon_topbottom(struct clip_context *ctx, + enum path_transition transition, + GLfloat x, GLfloat y, GLfloat clip_y) +{ + GLfloat xi; + + switch (transition) { + case PATH_TRANSITION_IN_TO_IN: + clip_append_vertex(ctx, x, y); + break; + case PATH_TRANSITION_IN_TO_OUT: + xi = clip_intersect_x(ctx->prev.x, ctx->prev.y, x, y, clip_y); + clip_append_vertex(ctx, xi, clip_y); + break; + case PATH_TRANSITION_OUT_TO_IN: + xi = clip_intersect_x(ctx->prev.x, ctx->prev.y, x, y, clip_y); + clip_append_vertex(ctx, xi, clip_y); + clip_append_vertex(ctx, x, y); + break; + case PATH_TRANSITION_OUT_TO_OUT: + /* nothing */ + break; + default: + assert(0 && "bad enum path_transition"); + } + + ctx->prev.x = x; + ctx->prev.y = y; +} + +static void +clip_context_prepare(struct clip_context *ctx, const struct polygon8 *src, + GLfloat *dst_x, GLfloat *dst_y) +{ + ctx->prev.x = src->x[src->n - 1]; + ctx->prev.y = src->y[src->n - 1]; + ctx->vertices.x = dst_x; + ctx->vertices.y = dst_y; +} + +static int +clip_polygon_left(struct clip_context *ctx, const struct polygon8 *src, + GLfloat *dst_x, GLfloat *dst_y) +{ + enum path_transition trans; + int i; + + clip_context_prepare(ctx, src, dst_x, dst_y); + for (i = 0; i < src->n; i++) { + trans = path_transition_left_edge(ctx, src->x[i], src->y[i]); + clip_polygon_leftright(ctx, trans, src->x[i], src->y[i], + ctx->clip.x1); + } + return ctx->vertices.x - dst_x; +} + +static int +clip_polygon_right(struct clip_context *ctx, const struct polygon8 *src, + GLfloat *dst_x, GLfloat *dst_y) +{ + enum path_transition trans; + int i; + + clip_context_prepare(ctx, src, dst_x, dst_y); + for (i = 0; i < src->n; i++) { + trans = path_transition_right_edge(ctx, src->x[i], src->y[i]); + clip_polygon_leftright(ctx, trans, src->x[i], src->y[i], + ctx->clip.x2); + } + return ctx->vertices.x - dst_x; +} + +static int +clip_polygon_top(struct clip_context *ctx, const struct polygon8 *src, + GLfloat *dst_x, GLfloat *dst_y) +{ + enum path_transition trans; + int i; + + clip_context_prepare(ctx, src, dst_x, dst_y); + for (i = 0; i < src->n; i++) { + trans = path_transition_top_edge(ctx, src->x[i], src->y[i]); + clip_polygon_topbottom(ctx, trans, src->x[i], src->y[i], + ctx->clip.y1); + } + return ctx->vertices.x - dst_x; +} + +static int +clip_polygon_bottom(struct clip_context *ctx, const struct polygon8 *src, + GLfloat *dst_x, GLfloat *dst_y) +{ + enum path_transition trans; + int i; + + clip_context_prepare(ctx, src, dst_x, dst_y); + for (i = 0; i < src->n; i++) { + trans = path_transition_bottom_edge(ctx, src->x[i], src->y[i]); + clip_polygon_topbottom(ctx, trans, src->x[i], src->y[i], + ctx->clip.y2); + } + return ctx->vertices.x - dst_x; +} + #define max(a, b) (((a) > (b)) ? (a) : (b)) #define min(a, b) (((a) > (b)) ? (b) : (a)) #define clip(x, a, b) min(max(x, a), b) -#define sign(x) ((x) >= 0) +/* + * Compute the boundary vertices of the intersection of the global coordinate + * aligned rectangle 'rect', and an arbitrary quadrilateral produced from + * 'surf_rect' when transformed from surface coordinates into global coordinates. + * The vertices are written to 'ex' and 'ey', and the return value is the + * number of vertices. Vertices are produced in clockwise winding order. + * Guarantees to produce either zero vertices, or 3-8 vertices with non-zero + * polygon area. + */ static int calculate_edges(struct weston_surface *es, pixman_box32_t *rect, pixman_box32_t *surf_rect, GLfloat *ex, GLfloat *ey) { - int i, n = 0; + struct polygon8 polygon; + struct clip_context ctx; + int i, n; GLfloat min_x, max_x, min_y, max_y; - GLfloat x[4] = { - surf_rect->x1, surf_rect->x2, surf_rect->x2, surf_rect->x1, - }; - GLfloat y[4] = { - surf_rect->y1, surf_rect->y1, surf_rect->y2, surf_rect->y2, + struct polygon8 surf = { + { surf_rect->x1, surf_rect->x2, surf_rect->x2, surf_rect->x1 }, + { surf_rect->y1, surf_rect->y1, surf_rect->y2, surf_rect->y2 }, + 4 }; - GLfloat cx1 = rect->x1; - GLfloat cx2 = rect->x2; - GLfloat cy1 = rect->y1; - GLfloat cy2 = rect->y2; - - GLfloat dist_squared(GLfloat x1, GLfloat y1, GLfloat x2, GLfloat y2) - { - GLfloat dx = (x1 - x2); - GLfloat dy = (y1 - y2); - return dx * dx + dy * dy; - } - void append_vertex(GLfloat x, GLfloat y) - { - /* don't emit duplicate vertices: */ - if ((n > 0) && (ex[n-1] == x) && (ey[n-1] == y)) - return; - ex[n] = x; - ey[n] = y; - n++; - } + ctx.clip.x1 = rect->x1; + ctx.clip.y1 = rect->y1; + ctx.clip.x2 = rect->x2; + ctx.clip.y2 = rect->y2; /* transform surface to screen space: */ - for (i = 0; i < 4; i++) - weston_surface_to_global_float(es, x[i], y[i], &x[i], &y[i]); + for (i = 0; i < surf.n; i++) + weston_surface_to_global_float(es, surf.x[i], surf.y[i], + &surf.x[i], &surf.y[i]); /* find bounding box: */ - min_x = max_x = x[0]; - min_y = max_y = y[0]; - - for (i = 1; i < 4; i++) { - min_x = min(min_x, x[i]); - max_x = max(max_x, x[i]); - min_y = min(min_y, y[i]); - max_y = max(max_y, y[i]); + min_x = max_x = surf.x[0]; + min_y = max_y = surf.y[0]; + + for (i = 1; i < surf.n; i++) { + min_x = min(min_x, surf.x[i]); + max_x = max(max_x, surf.x[i]); + min_y = min(min_y, surf.y[i]); + max_y = max(max_y, surf.y[i]); } /* First, simple bounding box check to discard early transformed * surface rects that do not intersect with the clip region: */ - if ((min_x > cx2) || (max_x < cx1) || - (min_y > cy2) || (max_y < cy1)) + if ((min_x >= ctx.clip.x2) || (max_x <= ctx.clip.x1) || + (min_y >= ctx.clip.y2) || (max_y <= ctx.clip.y1)) return 0; /* Simple case, bounding box edges are parallel to surface edges, @@ -130,224 +387,42 @@ calculate_edges(struct weston_surface *es, pixman_box32_t *rect, * vertices to the clip rect bounds: */ if (!es->transform.enabled) { - for (i = 0; i < 4; i++) { - ex[n] = clip(x[i], cx1, cx2); - ey[n] = clip(y[i], cy1, cy2); - n++; + for (i = 0; i < surf.n; i++) { + ex[i] = clip(surf.x[i], ctx.clip.x1, ctx.clip.x2); + ey[i] = clip(surf.y[i], ctx.clip.y1, ctx.clip.y2); } - return 4; + return surf.n; } - /* Hard case, transformation applied. We need to find the vertices - * of the shape that is the intersection of the clip rect and - * transformed surface. This can be anything from 3 to 8 sides. - * - * Observation: all the resulting vertices will be the intersection - * points of the transformed surface and the clip rect, plus the - * vertices of the clip rect which are enclosed by the transformed - * surface and the vertices of the transformed surface which are - * enclosed by the clip rect. - * - * Observation: there will be zero, one, or two resulting vertices - * for each edge of the src rect. - * - * Loop over four edges of the transformed rect: + /* Transformed case: use a general polygon clipping algorithm to + * clip the surface rectangle with each side of 'rect'. + * The algorithm is Sutherland-Hodgman, as explained in + * http://www.codeguru.com/cpp/misc/misc/graphics/article.php/c8965/Polygon-Clipping.htm + * but without looking at any of that code. */ - for (i = 0; i < 4; i++) { - GLfloat x1, y1, x2, y2; - int last_n = n; - - x1 = x[i]; - y1 = y[i]; - - /* if this vertex is contained in the clip rect, use it as-is: */ - if ((cx1 <= x1) && (x1 <= cx2) && - (cy1 <= y1) && (y1 <= cy2)) - append_vertex(x1, y1); - - /* for remaining, we consider the point as part of a line: */ - x2 = x[(i+1) % 4]; - y2 = y[(i+1) % 4]; - - if (x1 == x2) { - append_vertex(clip(x1, cx1, cx2), clip(y1, cy1, cy2)); - append_vertex(clip(x2, cx1, cx2), clip(y2, cy1, cy2)); - } else if (y1 == y2) { - append_vertex(clip(x1, cx1, cx2), clip(y1, cy1, cy2)); - append_vertex(clip(x2, cx1, cx2), clip(y2, cy1, cy2)); - } else { - GLfloat m, c, p; - GLfloat tx[2], ty[2]; - int tn = 0; - - int intersect_horiz(GLfloat y, GLfloat *p) - { - GLfloat x; - - /* if y does not lie between y1 and y2, no - * intersection possible - */ - if (sign(y-y1) == sign(y-y2)) - return 0; - - x = (y - c) / m; - - /* if x does not lie between cx1 and cx2, no - * intersection: - */ - if (sign(x-cx1) == sign(x-cx2)) - return 0; - - *p = x; - return 1; - } - - int intersect_vert(GLfloat x, GLfloat *p) - { - GLfloat y; - - if (sign(x-x1) == sign(x-x2)) - return 0; - - y = m * x + c; - - if (sign(y-cy1) == sign(y-cy2)) - return 0; - - *p = y; - return 1; - } - - /* y = mx + c */ - m = (y2 - y1) / (x2 - x1); - c = y1 - m * x1; - - /* check for up to two intersections with the four edges - * of the clip rect. Note that we don't know the orientation - * of the transformed surface wrt. the clip rect. So if when - * there are two intersection points, we need to put the one - * closest to x1,y1 first: - */ - - /* check top clip rect edge: */ - if (intersect_horiz(cy1, &p)) { - ty[tn] = cy1; - tx[tn] = p; - tn++; - } - - /* check right clip rect edge: */ - if (intersect_vert(cx2, &p)) { - ty[tn] = p; - tx[tn] = cx2; - tn++; - if (tn == 2) - goto edge_check_done; - } - - /* check bottom clip rect edge: */ - if (intersect_horiz(cy2, &p)) { - ty[tn] = cy2; - tx[tn] = p; - tn++; - if (tn == 2) - goto edge_check_done; - } - - /* check left clip rect edge: */ - if (intersect_vert(cx1, &p)) { - ty[tn] = p; - tx[tn] = cx1; - tn++; - } - -edge_check_done: - if (tn == 1) { - append_vertex(tx[0], ty[0]); - } else if (tn == 2) { - if (dist_squared(x1, y1, tx[0], ty[0]) < - dist_squared(x1, y1, tx[1], ty[1])) { - append_vertex(tx[0], ty[0]); - append_vertex(tx[1], ty[1]); - } else { - append_vertex(tx[1], ty[1]); - append_vertex(tx[0], ty[0]); - } - } - - if (n == last_n) { - GLfloat best_x=0, best_y=0; - uint32_t d, best_d = (unsigned int)-1; /* distance squared */ - uint32_t max_d = dist_squared(x2, y2, - x[(i+2) % 4], y[(i+2) % 4]); - - /* if there are no vertices on this line, it could be that - * there is a vertex of the clip rect that is enclosed by - * the transformed surface. Find the vertex of the clip - * rect that is reached by the shortest line perpendicular - * to the current edge, if any. - * - * slope of perpendicular is 1/m, so - * - * cy = -cx/m + c2 - * c2 = cy + cx/m - * - */ - - int perp_intersect(GLfloat cx, GLfloat cy, uint32_t *d) - { - GLfloat c2 = cy + cx/m; - GLfloat x = (c2 - c) / (m + 1/m); - - /* if the x position of the intersection of the - * perpendicular with the transformed edge does - * not lie within the bounds of the edge, then - * no intersection: - */ - if (sign(x-x1) == sign(x-x2)) - return 0; - - *d = dist_squared(cx, cy, x, (m * x) + c); - - /* if intersection distance is further away than - * opposite edge of surface region, it is invalid: - */ - if (*d > max_d) - return 0; - - return 1; - } - - if (perp_intersect(cx1, cy1, &d)) { - best_x = cx1; - best_y = cy1; - best_d = d; - } - - if (perp_intersect(cx1, cy2, &d) && (d < best_d)) { - best_x = cx1; - best_y = cy2; - best_d = d; - } - - if (perp_intersect(cx2, cy2, &d) && (d < best_d)) { - best_x = cx2; - best_y = cy2; - best_d = d; - } - - if (perp_intersect(cx2, cy1, &d) && (d < best_d)) { - best_x = cx2; - best_y = cy1; - best_d = d; - } - - if (best_d != (unsigned int)-1) // XXX can this happen? - append_vertex(best_x, best_y); - } - } - + polygon.n = clip_polygon_left(&ctx, &surf, polygon.x, polygon.y); + surf.n = clip_polygon_right(&ctx, &polygon, surf.x, surf.y); + polygon.n = clip_polygon_top(&ctx, &surf, polygon.x, polygon.y); + surf.n = clip_polygon_bottom(&ctx, &polygon, surf.x, surf.y); + + /* Get rid of duplicate vertices */ + ex[0] = surf.x[0]; + ey[0] = surf.y[0]; + n = 1; + for (i = 1; i < surf.n; i++) { + if (float_difference(ex[n - 1], surf.x[i]) == 0.0f && + float_difference(ey[n - 1], surf.y[i]) == 0.0f) + continue; + ex[n] = surf.x[i]; + ey[n] = surf.y[i]; + n++; } + if (float_difference(ex[n - 1], surf.x[0]) == 0.0f && + float_difference(ey[n - 1], surf.y[0]) == 0.0f) + n--; + + if (n < 3) + return 0; return n; }