tests: color shaper-matrix test

1. Use fixture_setup to set the generated by LCMS output profile based on
   given chromaticities and white points. The following  list of well known
   chromaticities:
    - sRGB
    - adobe RGB
    - bt2020
   and white point is D65. Use INTENT_ABSOLUTE_COLORIMETRIC to avoid BPC.
   Input profile is always sRGB and it is used internally by Weston as
   stock profile.

2. Use these hardcoded matrixes as part of pipeline 1DLUT->3x3->1DLUT.
   The diagnostic code to retrieve the transform matrix is availble into
   test in the comments. The conversion matrixes generated for the
   following cases:
    - sRGB to sRGB (unity)
    - sRGB to adobeRGB
    - sRGB to BT2020
3. Compare GPU shaders(gl texture3D) vs manual pipeline calculation
   Use different max tolerable error per transform.
   There are comments how number of points in 3DLUT is related to tolerance.
   Tolerance depends more on the 1D LUT used for the inv EOTF than
   the tested 3D LUT size: 9x9x9, 17x17x17, 33x33x33, 127x127x127.

4. Enable build matrix-shaper test if color-management-lcms is enabled.

Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
dev
Vitaly Prosyak 3 years ago
parent 264a18f01a
commit fe35ca2d68
  1. 470
      tests/color-shaper-matrix-test.c
  2. 12
      tests/meson.build
  3. BIN
      tests/reference/shaper_matrix-00.png
  4. BIN
      tests/reference/shaper_matrix-01.png
  5. BIN
      tests/reference/shaper_matrix-02.png

@ -0,0 +1,470 @@
/*
* Copyright 2021 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial
* portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include "config.h"
#include <math.h>
#include "weston-test-client-helper.h"
#include "weston-test-fixture-compositor.h"
#include "color_util.h"
#include <string.h>
#include <lcms2.h>
#include <linux/limits.h>
struct lcms_pipeline {
/**
* Color space name
*/
const char *color_space;
/**
* Chromaticities for output profile
*/
cmsCIExyYTRIPLE prim_output;
/**
* tone curve enum
*/
enum transfer_fn pre_fn;
/**
* Transform matrix from sRGB to target chromaticities in prim_output
*/
struct lcmsMAT3 mat;
/**
* tone curve enum
*/
enum transfer_fn post_fn;
/**
* 2/255 or 3/255 maximum possible error, where 255 is 8 bit max value
*/
int tolerance;
};
static const int WINDOW_WIDTH = 256;
static const int WINDOW_HEIGHT = 24;
static cmsCIExyY wp_d65 = { 0.31271, 0.32902, 1.0 };
struct setup_args {
struct fixture_metadata meta;
struct lcms_pipeline pipeline;
};
/*
* Using currently destination gamut bigger than source.
* Using https://www.colour-science.org/ we can extract conversion matrix:
* import colour
* colour.matrix_RGB_to_RGB(colour.RGB_COLOURSPACES['sRGB'], colour.RGB_COLOURSPACES['Adobe RGB (1998)'], None)
* colour.matrix_RGB_to_RGB(colour.RGB_COLOURSPACES['sRGB'], colour.RGB_COLOURSPACES['ITU-R BT.2020'], None)
*/
const struct setup_args arr_setup[] = {
{
.meta.name = "sRGB->sRGB unity",
.pipeline = {
.color_space = "sRGB",
.prim_output = {
.Red = { 0.640, 0.330, 1.0 },
.Green = { 0.300, 0.600, 1.0 },
.Blue = { 0.150, 0.060, 1.0 }
},
.pre_fn = TRANSFER_FN_SRGB_EOTF,
.mat = LCMSMAT3(1.0, 0.0, 0.0,
0.0, 1.0, 0.0,
0.0, 0.0, 1.0),
.post_fn = TRANSFER_FN_SRGB_EOTF_INVERSE,
.tolerance = 0
}
},
{
.meta.name = "sRGB->adobeRGB",
.pipeline = {
.color_space = "adobeRGB",
.prim_output = {
.Red = { 0.640, 0.330, 1.0 },
.Green = { 0.210, 0.710, 1.0 },
.Blue = { 0.150, 0.060, 1.0 }
},
.pre_fn = TRANSFER_FN_SRGB_EOTF,
.mat = LCMSMAT3(0.715119, 0.284881, 0.0,
0.0, 1.0, 0.0,
0.0, 0.041169, 0.958831),
.post_fn = TRANSFER_FN_ADOBE_RGB_EOTF_INVERSE,
.tolerance = 1
/*
* Tolerance depends more on the 1D LUT used for the
* inv EOTF than the tested 3D LUT size:
* 9x9x9, 17x17x17, 33x33x33, 127x127x127
*/
}
},
{
.meta.name = "sRGB->bt2020",
.pipeline = {
.color_space = "bt2020",
.prim_output = {
.Red = { 0.708, 0.292, 1.0 },
.Green = { 0.170, 0.797, 1.0 },
.Blue = { 0.131, 0.046, 1.0 }
},
.pre_fn = TRANSFER_FN_SRGB_EOTF,
.mat = LCMSMAT3(0.627402, 0.329292, 0.043306,
0.069095, 0.919544, 0.011360,
0.016394, 0.088028, 0.895578),
/* this is equivalent to BT.1886 with zero black level */
.post_fn = TRANSFER_FN_POWER2_4_EOTF_INVERSE,
.tolerance = 5
/*
* TODO: when we add power-law in the curve enumeration
* in GL-renderer, then we should fix the tolerance
* as the error should reduce a lot.
*/
}
}
};
struct image_header {
int width;
int height;
int stride;
int depth;
pixman_format_code_t pix_format;
uint32_t *data;
};
static void
get_image_prop(struct buffer *buf, struct image_header *header)
{
header->width = pixman_image_get_width(buf->image);
header->height = pixman_image_get_height(buf->image);
header->stride = pixman_image_get_stride(buf->image);
header->depth = pixman_image_get_depth(buf->image);
header->pix_format = pixman_image_get_format (buf->image);
header->data = pixman_image_get_data(buf->image);
}
static void
gen_ramp_rgb(const struct image_header *header, int bitwidth, int width_bar)
{
static const int hue[][3] = {
{ 1, 1, 1 }, /* White */
{ 1, 1, 0 }, /* Yellow */
{ 0, 1, 1 }, /* Cyan */
{ 0, 1, 0 }, /* Green */
{ 1, 0, 1 }, /* Magenta */
{ 1, 0, 0 }, /* Red */
{ 0, 0, 1 }, /* Blue */
};
const int num_hues = ARRAY_LENGTH(hue);
float val_max;
int x, y;
int hue_index;
float value;
unsigned char r, g, b;
uint32_t *pixel;
float n_steps = width_bar - 1;
val_max = (1 << bitwidth) - 1;
for (y = 0; y < header->height; y++) {
hue_index = (y * num_hues) / (header->height - 1);
hue_index = MIN(hue_index, num_hues - 1);
for (x = 0; x < header->width; x++) {
struct color_float rgb = { 0, 0, 0 };
value = (float)x / (float)(header->width - 1);
if (width_bar > 1)
value = floor(value * n_steps) / n_steps;
if (hue[hue_index][0])
rgb.r = value;
if (hue[hue_index][1])
rgb.g = value;
if (hue[hue_index][2])
rgb.b = value;
sRGB_delinearize(&rgb);
r = round(rgb.r * val_max);
g = round(rgb.g * val_max);
b = round(rgb.b * val_max);
pixel = header->data + (y * header->stride / 4) + x;
*pixel = (255U << 24) | (r << 16) | (g << 8) | b;
}
}
}
static cmsHPROFILE
build_lcms_profile_output(const struct lcms_pipeline *pipeline)
{
cmsToneCurve *arr_curves[3];
cmsHPROFILE hRGB;
int type_inverse_tone_curve;
double inverse_tone_curve_param[5];
assert(find_tone_curve_type(pipeline->post_fn, &type_inverse_tone_curve,
inverse_tone_curve_param));
/*
* We are creating output profile and therefore we can use the following:
* calling semantics:
* cmsBuildParametricToneCurve(type_inverse_tone_curve, inverse_tone_curve_param)
* The function find_tone_curve_type sets the type of curve positive if it
* is tone curve and negative if it is inverse. When we create an ICC
* profile we should use a tone curve, the inversion is done by LCMS
* when the profile is used for output.
*/
arr_curves[0] = arr_curves[1] = arr_curves[2] =
cmsBuildParametricToneCurve(NULL,
(-1) * type_inverse_tone_curve,
inverse_tone_curve_param);
assert(arr_curves[0]);
hRGB = cmsCreateRGBProfileTHR(NULL, &wp_d65,
&pipeline->prim_output, arr_curves);
assert(hRGB);
cmsFreeToneCurve(arr_curves[0]);
return hRGB;
}
static char *
build_output_icc_profile(const struct lcms_pipeline *pipe)
{
char *profile_name = NULL;
cmsHPROFILE profile = NULL;
char *wd;
int ret;
bool saved;
wd = realpath(".", NULL);
assert(wd);
ret = asprintf(&profile_name, "%s/matrix-shaper-test-%s.icm", wd,
pipe->color_space);
assert(ret > 0);
profile = build_lcms_profile_output(pipe);
assert(profile);
saved = cmsSaveProfileToFile(profile, profile_name);
assert(saved);
cmsCloseProfile(profile);
return profile_name;
}
static enum test_result_code
fixture_setup(struct weston_test_harness *harness, const struct setup_args *arg)
{
struct compositor_setup setup;
char *file_name;
compositor_setup_defaults(&setup);
setup.renderer = RENDERER_GL;
setup.backend = WESTON_BACKEND_HEADLESS;
setup.width = WINDOW_WIDTH;
setup.height = WINDOW_HEIGHT;
setup.shell = SHELL_TEST_DESKTOP;
file_name = build_output_icc_profile(&arg->pipeline);
if (!file_name)
return RESULT_HARD_ERROR;
weston_ini_setup(&setup,
cfgln("[core]"),
cfgln("color-management=true"),
cfgln("[output]"),
cfgln("name=headless"),
cfgln("icc_profile=%s", file_name));
free(file_name);
return weston_test_harness_execute_as_client(harness, &setup);
}
DECLARE_FIXTURE_SETUP_WITH_ARG(fixture_setup, arr_setup, meta);
static bool
compare_float(float ref, float dst, int x, const char *chan,
float *max_diff, float max_allow_diff)
{
#if 0
/*
* This file can be loaded in Octave for visualization.
*
* S = load('compare_float_dump.txt');
*
* rvec = S(S(:,1)==114, 2:3);
* gvec = S(S(:,1)==103, 2:3);
* bvec = S(S(:,1)==98, 2:3);
*
* figure
* subplot(3, 1, 1);
* plot(rvec(:,1), rvec(:,2) .* 255, 'r');
* subplot(3, 1, 2);
* plot(gvec(:,1), gvec(:,2) .* 255, 'g');
* subplot(3, 1, 3);
* plot(bvec(:,1), bvec(:,2) .* 255, 'b');
*/
static FILE *fp = NULL;
if (!fp)
fp = fopen("compare_float_dump.txt", "w");
fprintf(fp, "%d %d %f\n", chan[0], x, dst - ref);
fflush(fp);
#endif
float diff = fabsf(ref - dst);
if (diff > *max_diff)
*max_diff = diff;
if (diff <= max_allow_diff)
return true;
testlog("x=%d %s: ref %f != dst %f, delta %f\n",
x, chan, ref, dst, dst - ref);
return false;
}
static bool
process_pipeline_comparison(const struct image_header *src,
const struct image_header *shot,
const struct setup_args * arg)
{
const float max_pixel_value = 255.0;
struct color_float max_diff_pipeline = { 0.0f, 0.0f, 0.0f, 0.0f };
float max_allow_diff = arg->pipeline.tolerance / max_pixel_value;
float max_err = 0;
float f_max_err = 0;
bool ok = true;
uint32_t *row_ptr, *row_ptr_shot;
int y, x;
struct color_float pix_src;
struct color_float pix_src_pipeline;
struct color_float pix_shot;
for (y = 0; y < src->height; y++) {
row_ptr = (uint32_t*)((uint8_t*)src->data + (src->stride * y));
row_ptr_shot = (uint32_t*)((uint8_t*)shot->data + (shot->stride * y));
for (x = 0; x < src->width; x++) {
pix_src = a8r8g8b8_to_float(row_ptr[x]);
pix_shot = a8r8g8b8_to_float(row_ptr_shot[x]);
/* do pipeline processing */
process_pixel_using_pipeline(arg->pipeline.pre_fn,
&arg->pipeline.mat,
arg->pipeline.post_fn,
&pix_src, &pix_src_pipeline);
/* check if pipeline matches to shader variant */
ok &= compare_float(pix_src_pipeline.r, pix_shot.r, x,"r",
&max_diff_pipeline.r, max_allow_diff);
ok &= compare_float(pix_src_pipeline.g, pix_shot.g, x, "g",
&max_diff_pipeline.g, max_allow_diff);
ok &= compare_float(pix_src_pipeline.b, pix_shot.b, x, "b",
&max_diff_pipeline.b, max_allow_diff);
}
}
max_err = max_diff_pipeline.r;
if (max_err < max_diff_pipeline.g)
max_err = max_diff_pipeline.g;
if (max_err < max_diff_pipeline.b)
max_err = max_diff_pipeline.b;
f_max_err = max_pixel_value * max_err;
testlog("%s %s %s tol_req %d, tol_cal %f, max diff: r=%f, g=%f, b=%f\n",
__func__, ok == true? "SUCCESS":"FAILURE",
arg->meta.name, arg->pipeline.tolerance, f_max_err,
max_diff_pipeline.r, max_diff_pipeline.g, max_diff_pipeline.b);
return ok;
}
static bool
check_process_pattern_ex(struct buffer *src, struct buffer *shot,
const struct setup_args * arg)
{
struct image_header header_src;
struct image_header header_shot;
bool ok;
get_image_prop(src, &header_src);
get_image_prop(shot, &header_shot);
/* no point to compare different images */
assert(header_src.width == header_shot.width);
assert(header_src.height == header_shot.height);
ok = process_pipeline_comparison(&header_src, &header_shot, arg);
return ok;
}
/*
* Test that matrix-shaper profile does CM correctly, it is used color ramp pattern
*/
TEST(shaper_matrix)
{
const int width = WINDOW_WIDTH;
const int height = WINDOW_HEIGHT;
const int bitwidth = 8;
const int width_bar = 32;
struct client *client;
struct buffer *buf;
struct buffer *shot;
struct wl_surface *surface;
struct image_header image;
bool match;
int seq_no = get_test_fixture_index();
client = create_client_and_test_surface(0, 0, width, height);
assert(client);
surface = client->surface->wl_surface;
buf = create_shm_buffer_a8r8g8b8(client, width, height);
get_image_prop(buf, &image);
gen_ramp_rgb(&image, bitwidth, width_bar);
wl_surface_attach(surface, buf->proxy, 0, 0);
wl_surface_damage(surface, 0, 0, width, height);
wl_surface_commit(surface);
shot = capture_screenshot_of_output(client);
assert(shot);
match = verify_image(shot, "shaper_matrix", seq_no, NULL, seq_no);
assert(check_process_pattern_ex(buf, shot, &arr_setup[seq_no]));
assert(match);
buffer_destroy(shot);
buffer_destroy(buf);
client_destroy(client);
}

@ -226,6 +226,18 @@ tests = [
}, },
] ]
if get_option('color-management-lcms')
dep_lcms2 = dependency('lcms2', version: '>= 2.9', required: false)
if not dep_lcms2.found()
error('color-management-lcms tests require lcms2 which was not found. Or, you can use \'-Dcolor-management-lcms=false\'.')
endif
tests += {
'name': 'color-shaper-matrix',
'dep_objs': [ dep_libm, dep_lcms2 ]
}
endif
tests_standalone = [ tests_standalone = [
['config-parser', [], [ dep_zucmain ]], ['config-parser', [], [ dep_zucmain ]],
['matrix', [], [ dep_libm, dep_matrix_c ]], ['matrix', [], [ dep_libm, dep_matrix_c ]],

Binary file not shown.

After

Width:  |  Height:  |  Size: 402 B

Binary file not shown.

After

Width:  |  Height:  |  Size: 506 B

Binary file not shown.

After

Width:  |  Height:  |  Size: 730 B

Loading…
Cancel
Save