Fixes the following warnings when building with _FORTIFY_SOURCE
and optimizations enabled:
../shared/xalloc.h:49:9: error: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
49 | write(STDERR_FILENO, oommsg, strlen(oommsg));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
or
../compositor/main.c:427:25: error: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
427 | write(STDERR_FILENO, fail_seteuid,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
428 | strlen(fail_seteuid));
| ~~~~~~~~~~~~~~~~~~~~~
../compositor/main.c:434:25: error: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
434 | write(STDERR_FILENO, fail_cloexec,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
435 | strlen(fail_cloexec));
| ~~~~~~~~~~~~~~~~~~~~~
../compositor/main.c:442:25: error: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
442 | write(STDERR_FILENO, fail_exec, strlen(fail_exec));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
(cherry picked from commit 8c4cdd782e17aa587bfccb6746998571ddc90dd7)
As things are, even when mode=current is specified on the .ini file,
a full modeset is needed (and done), which causes a very noticeable
screen blinking. That is because setting the max_bpc on a connector
needs full modesetting.
The idea here is that if mode=current on the .ini, no modesetting
should be done, so the current max_bpc is programmed into the
connector.
But if a custom max-bpc=... is specified, that will be used instead,
even if mode=current on the .ini
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/660
Signed-off-by: vanfanel <redwindwanderer@gmail.com>
(cherry picked from commit 3240ccc69d1488003c1cfc36d23750145d4f13f7)
When the gl-renderer is not enabled, weston fails to start, as it
doesn't automatically fallback to the pixman renderer, which is
always enabled.
This commit changes the drm-backend to set by default the --use-pixman
option to true when the gl-renderer is disabled (BUILD_DRM_GBM is not
defined).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is pretty counter-intuitive, and should probably happen outside of
the core in the front end while configuring the outputs.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This is so the systemd-notify module, if used, will notify readiness after
we're ready to accept X connections, instead of before.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This is awkward and long deprecated, and makes us load xwayland after all
the other modules so we know if we have to load it or not. Let's remove it.
We do still need to prevent loading the module the wrong way, though.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
[common equivalent of 77cf8cb006 in Xwayland from Pekka Paalanen; its
commit message follows]
Between fork() and exec() in the child process it is only safe to use
async-signal-safe functions. weston_log() definitely is not one, it
allocates memory and does whatnot.
weston_log() is also inappropriate for other reasons: the child process
has its own stream buffers and flight-recorder. No-one looks into the
child process' flight recorder, so messages would be lost there. The
logging machinery might also attempt to write into debug streams,
meaning both parent and child could be writing simultaneously.
It seems that the best we can do is to pre-bake an error message and
only write() it out if exec() fails. There is no mention that even
strerror_r() might be safe to call, so we don't.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Use the custom_env framework we added for Xwayland when forking to
execute clients. This avoids calling the unsafe getenv in between fork
and exec.
Signed-off-by: Daniel Stone <daniels@collabora.com>
It was only a small function, and inlining it will allow us to make it
more safe without having to duplicate a ton of stuff.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This doesn't actually stop us from calling setenv() in between fork()
and exec() when starting clients, but gets us closer to Xwayland's safe
implementation by reusing one of the helpers it added.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This patch fixes the following:
AddressSanitizer:DEADLYSIGNAL
=================================================================
==528956==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000008 (pc 0x7fbc5d66bdd7 bp 0x7ffd465573c0 sp 0x7ffd46557398 T0)
==528956==The signal is caused by a WRITE memory access.
==528956==Hint: address points to the zero page.
#0 0x7fbc5d66bdd7 in wl_list_remove ../../git/wayland/src/wayland-util.c:56
#1 0x7fbc5cb8869e in wxw_compositor_destroy ../../git/weston/compositor/xwayland.c:357
#2 0x7fbc5baf3ca6 in weston_signal_emit_mutable ../../git/weston/shared/signal.c:62
#3 0x7fbc5ba4d6f9 in weston_compositor_destroy ../../git/weston/libweston/compositor.c:8639
#4 0x7fbc5cb7a5f2 in wet_main ../../git/weston/compositor/main.c:3772
#5 0x55bd13de2179 in main ../../git/weston/compositor/executable.c:33
#6 0x7fbc5be61d09 in __libc_start_main ../csu/libc-start.c:308
#7 0x55bd13de2099 in _start (/home/pq/local/bin/weston+0x1099)
The problem is triggered by configuring a bad path to Xwayland in
weston.ini, which causes exec() to fail. The fork() succeeded though,
which means the weston_process was already on the watch list, and the
watch can be handled, making sigchl_handler() leave the link
uninitialized.
Making sure the link remains removable fixes this.
Fixes: 18897253d4
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This way the backends will the actual outputs. And at that point the backend
knows the compositor is shutting down so it can handle this differently if
necessary.
Afterwards wet_compositor_destroy_layout() just deletes the remaining
datastructures.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
For working around hardware limitations as explained in the man page.
Now added for completeness' sake without knowing if anyone will ever
need this.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
To support heterogeneous outputs, the output must be created by the
same backend as the head(s) it is created for. Solve this by always
creating an output with a first head to attach that determines the
backend to use. Skip already attached first heads in drm_try_attach().
See: https://gitlab.freedesktop.org/wayland/weston/-/issues/268
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add a struct weston_head parameter to weston_compositor_create_output()
and fold weston_compositor_create_output_with_head() into it.
See: https://gitlab.freedesktop.org/wayland/weston/-/issues/268
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This adds an option to program basic display color characteristics from
weston.ini. In the future there will be a way to set this information
from EDID, but because EDID is unreliable that will probably not be the
default. An ICC profile will likely override most or all of this. The
main reason to add this option is to be able to characterise HDR
monitors.
An 'output' section can have a key 'color_characteristics' (string)
set to a name. The name refers to any 'color_characteristics' section
with 'name' set to the same string.
The 'name' key of a 'color_characteristics' section cannot contain a
colon ':'. Names with colon in 'output' section key
'color_characteristics' value are reserved for future use, e.g. to
indicate that the metadata is to be taken from EDID instead of a
weston.ini section.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We currently hardcode a 60Hz update rate for the rdp backend.
In some cases it may be useful to override this to increase the rate
for a faster monitor, or to decrease it to reduce network traffic.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
We already have a way for a single RDP client connection to be
passed from a parent process to a child using a combination
of environment variable (RDP_FD) and env var (--env-socket)
This patch allows a bound socket fd (as opposed to a client
connection) to be established in a parent process and provided
to the rdp backend. WSLg uses this to set up an AF_VSOCK
socket for communication between a Windows RDP client and a
weston compositor running under a hypervisor.
Co-authored-by: Hideyuki Nagase <hideyukn@microsoft.com>
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
There are currently compatibility issues between FreeRDP's implementation
of the RemoteFX codec and Microsoft's implementation.
Perhaps this will be fixed in the future and this option can go away,
but for now it's necessary to have a way to disable the codec if the
windows client is going to be connecting to a weston server.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
When we launch clients they currently stay in the same session as
weston, and share its controlling terminal. This means hitting ctrl-c
in weston's controlling terminal will send SIGINT to the clients as
well. It also means SIGHUP will be propagated to our launched clients
if weston's controlling terminal is closed.
While generally not harmful, this behaviour is not beneficial, and
is present by default and not by design.
Problems arise when launching weston in a debugger, as a ctrl-c sent to
the debugger will be propagated not only to the debugger, but all the child
processes sharing weston's session. This results in weston-desktop-shell
being killed by the ctrl-c that was intended to stop weston for debugging.
If weston-desktop-shell is killed within 30 second of startup, it will
result weston performing a clean shutdown. This clean shutdown can
make debugging a little too surprising.
Ostensibly, clients launched via weston_client_launch will be wayland
clients that terminate cleanly on their own if weston is killed, so
there should be no need for them to remain in weston's session to
catch ctrl-c from its controlling terminal. Nor should they need a
controlling terminal for their general operation.
Use setsid() to move them to their own session, devoid of controlling
terminal, to make using a debugger a little less confusing in some
cases.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
signalfd interacts badly with gdb's signal trapping - when hitting
ctrl-c in a debugger attached to weston, weston will receive the
signal. This results in weston exiting cleanly when the intent
was to use gdb to interfere with its operation.
Trapping SIGINT was introduced in commit 50dc6989 which ensured we
would call wl_display_terminate() on SIGINT or SIGTERM to clean
up our socket.
Killing weston with SIGINT is quite common for several developers,
so it's important to preserve this clean shutdown behaviour, so
we can't naively stop trapping SIGINT entirely.
Instead, use the sigaction() function to trap SIGINT, and have
the SIGINT handler send weston SIGUSR2 (SIGUSR1 is already
used by xwayland). SIGUSR2 can be trapped in the proper wayland
way via wl_event_loop_add_signal(). This way we can properly
break our event loop and clean up on SIGINT, but we can also
have gdb intercept SIGINT.
There are other ways around this, but I'm hoping this one allows
people to continue using ctrl-c to stop weston, and doesn't
require additional project specific gdb knowledge.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We've been trapping SIGQUIT for a "clean shutdown" since commit 3cad436a
However, sources such as:
http://www.gnu.org/software/libc/manual/html_node/Termination-Signals.html
indicate we probably shouldn't be trapping it at all, as the intent of
SIGQUIT is to leave a core file and debug artifacts from the run.
We should perform the minimal amount of clean up to ensure the system isn't
left in an unusable state - but these days that's performed by other
software such as logind.
We can safely stop trapping SIGQUIT entirely.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We could overflow a local buffer if there were more than ten million
concurrently active displays within the current user's session. This
seems vanishingly unlikely, and harmless, but does at least squash a
compiler warning emitted by gcc 12+.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fbdev backend was deprecated in the Weston 10.0.0 release with
6338dbd581. Before that, I suggested
already in 2019 to remove it, but it was too soon then. Now it seems the
final voices asking for fbdev to be kept have been satisfied, see the
linked issue.
Fbdev-backend uses a kernel graphics UAPI (fbdev) which is sub-par for a
Wayland compositor: you cannot do GPU accelerated graphics in any
reasonable way, no hotplug support, multi-output support is tedious, and
so on. Most importantly, Linux has deprecated fbdev a long time ago due
to the UAPI fitting modern systems and use cases very poorly, but cannot
get rid of it if any users remain. Let's do here what we can to reduce
fbdev usage.
I am doing color management related additions to libweston which require
adding checks to every backend. One backend less is less churn to write
and review.
Libweston major version has already been bumped to 11, so the next
release will be Weston 11, without fbdev. enum weston_compositor_backend
entries change their numerical values.
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/581
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This doesn't work with any of the launchers we've kept. Remove the option
and all the bits that handle it.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Make it slightly easier to disambiguate clients when we log the protocol
stream from the server side.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Leak found running drm-smoke-test with ASan.
Do not forget to free string specific_device in load_drm_backend().
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This adds "icc_profile" key support in [output] sections for backends
headless, x11, wayland, and drm, and also for remoted and pipewire
outputs FWIW. On the other hand, RDP-backend does not use output
sections from weston.ini, and fbdev-backend does not deserve anything
new (it wouldn't support color management anyway due to no GL-renderer).
This allows one to configure an ICC v2 or v4 file to be used as an
output profile. However, color-lcms does not actually use output
profiles yet, so trying this will fail until support is implemented.
The parent_winsys_profile argument is reserved for using the color
profile from a parent window system where applicable, if nothing else is
set in weston.ini. None of the nested backends provide an output color
profile yet. It is more of a reminder of a missing feature than a
serious implementation.
Note: cms-static Weston plugin uses the exact same weston.ini key for
loading VCGT from ICC profiles. If "color-management" option is set to
false, this new use of "icc_profile" is disabled and the old behavior
with cms-static is kept.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Add a command line option to disable the default flight recorders
so we can save a little bit of CPU and memory on systems where
this isn't necessary.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The value of the `path` parameter is executed right before
wl_display_run.
The `watch` parameter is meant for things like tests using
the headless backend and the kiosk shell.
Fixes https://gitlab.freedesktop.org/wayland/weston/-/issues/171
Signed-off-by: Alvarito050506 <donfrutosgomez@gmail.com>
Found by ASan:
Direct leak of 30 byte(s) in 1 object(s) allocated from:
#0 0x7f4dcf029810 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x3a810)
#1 0x7f4dcefd2143 in handle_option ../../git/weston/shared/option-parser.c:56
#2 0x7f4dcefd2473 in long_option ../../git/weston/shared/option-parser.c:84
#3 0x7f4dcefd2bb6 in parse_options ../../git/weston/shared/option-parser.c:175
#4 0x7f4dcefc7b0d in wet_main ../../git/weston/compositor/main.c:3229
#5 0x5593dfa38ffd in execute_compositor ../../git/weston/tests/weston-test-fixture-compositor.c:432
#6 0x5593dfa3ca69 in weston_test_harness_execute_as_client ../../git/weston/tests/weston-test-runner.c:528
#7 0x5593dfa2e511 in fixture_setup ../../git/weston/tests/ivi-shell-app-test.c:139
#8 0x5593dfa2e596 in fixture_setup_run_ ../../git/weston/tests/ivi-shell-app-test.c:141
#9 0x5593dfa3d01e in main ../../git/weston/tests/weston-test-runner.c:661
#10 0x7f4dcec2d09a in __libc_start_main ../csu/libc-start.c:308
#11 0x5593dfa2d769 in _start (/home/pq/build/weston-meson/tests/test-ivi-shell-app+0xd769)
when running
ASAN_OPTIONS=fast_unwind_on_malloc=0,malloc_context_size=50 \
LSAN_OPTIONS=suppressions=/home/pq/git/weston/.gitlab-ci/leak-sanitizer.supp \
./tests/test-ivi-shell-app
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This reverts commit 81ef6d0ab3.
This also removes a bit from "tests: ensure color-lcms plugin loads".
Use of the shadow buffer is determined automatically based on
color transformations by the previous commit
"gl-renderer: use shadow framebuffer automatically".
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Since commit "libweston: add required_capabilities test suite quirk"
a new function that depends on test_data is being called in wet_main().
We should check if test_data is NULL before calling it, otherwise
we have a segfault when running outside the test suite.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This allows tests to skip when required capabilities are not present.
The output damage test for the shadow buffer case needs this.
required_capabilities is added to struct weston_testsuite_quirks which
is libweston public API just because there is no better place currently.
This is a little weird because the code to check it is in compositor,
not libweston.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The capability strings will be printed also in another occasion, where
the colon does not fit with the capability description.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This adds an output section option use-renderer-shadow in weston.ini.
This option is only recognized with headless and DRM backends, because
it requires GL-renderer and does not support resizing outputs.
The option is called use-renderer-shadow because this is what it does
right now. In the future the same setting will be used to turn on more
complex image processing when operational pieces required for color
management land. Once color management is implemented, this option is
expected to be removed. This option allows developer testing of features
to be used to implement color management.
This is a rewrite of "weston.ini: introduce use-shadow-fbo in output
config" by Harish Krupo. The main.c code is structured differently, the
weston.ini option is renamed, and the man page paragraph is moved to
weston.ini.man with different content.
Cc: Harish Krupo <harishkrupo@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This adds the libweston capability bit for "color operations" which
refers to a renderer's support for operations needed for color
management. GL-renderer will grow the support while Pixman-renderer will
not, which is why the cap is needed.
To make an example use of the cap, this also adds new API:
weston_output_set_renderer_shadow_buffer(). This is a temporary API to
enable future experimental features. The first such feature will be the
renderer internal shadow buffer, the boolean variable for it taken from
Harish Krupo's "weston.ini: introduce use-shadow-fbo in output config".
Obviously this patch does not implement the renderer shadow buffer. No
renderer sets WESTON_CAP_COLOR_OPS yet so trying to enable it will fail.
The documentation here is deliberately vague, because the bits needed
for color management will come in trickling for a long time until we can
call it color management in any sense. Until then, the temporary API
shall remain, perhaps poorly named.
Cc: Harish Krupo <harishkrupo@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The buffer created for flight recorder, the allocations done in 'logger' and
'flight_rec' subscribers were not freed when wl_display_create() fails. So
move them to out_display
Signed-off-by: Anurup M <anurup.mokkil@gmail.com>
Without this patch, the DRM-backend would rewrite the 'require-input',
core section option given by the user.
This removes 'continue_without_input' DRM-backend option and takes into
consideration the cmd line option only if that was passed (Pekka Paalanen).
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Until now we had the test quirks initialization in wet_main(),
just after calling weston_compositor_create(). But there are
some cases that require the quirks during struct weston_compositor
creation time.
Move test quirks initialization to weston_compositor_create()
in order to cover more use cases for the test quirks mechanism.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
There are some specific cases in which we need Weston to
behave differently when running in the test suite. This
adds a new API to allow the tests to select these behaviors.
For instance, in the DRM backend we plan to add a writeback
connector screenshooter. In case it fails for some
reason, it should fallback to the renderer screenshooter
that all other backends use. But if we add a test to
ensure the correctness of the writeback screenshooter,
we don't want it to fallback to the renderer one, we
want it to fail. With this new API we can choose to
disable the fallback behavior specifically for this test.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This was forgotten in "weston: remove SEGV and ABRT handlers". It is
unused.
Fixes: bb707dc0fe
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Nikita Tokarchuk
Marius Vlad
vanfanel
Thomas Petazzoni
Derek Foreman
Daniel Stone
Pekka Paalanen
Michael Olbrich
Philipp Zabel
Hideyuki Nagase
Brenton DeGeer
Leandro Ribeiro
Alvarito050506
Damian Wrobel
Anurup M