Some graphics drivers (currently at least VMware and AMD) will give a 0
timestamp for the atomic mode flip completion event when turning off
the display. This causes us to trip an assertion in
weston_output_frame_finish() because the clock jumps backwards, which
isn't a condition the presentation feedback code should be dealing with.
This is a good assertion and we'd like to keep it. And there's some
expectation that this is buggy behaviour in the graphics drivers that will
be fixed at some point.
Pragmatically speaking though, there's nothing productive we can do with a
correct timestamp for the display shutdown. So let's just flag the
event sent for DPMS off as invalid so presentation feedback doesn't have
to worry about it, and the assert doesn't fire.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Fixes a minor leak due to launcher-libseatd:
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7f15664e5037 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.6+0xaa037)
#1 0x7f156305c59f in zalloc ../include/libweston/zalloc.h:38
#2 0x7f156305c99b in seat_open_device ../libweston/launcher-libseat.c:114
#3 0x7f1563056341 in weston_launcher_open ../libweston/launcher-util.c:79
#4 0x7f156302f1e2 in drm_device_is_kms ../libweston/backend-drm/drm.c:2616
#5 0x7f156302f751 in find_primary_gpu ../libweston/backend-drm/drm.c:2715
#6 0x7f15630309a5 in drm_backend_create ../libweston/backend-drm/drm.c:2970
#7 0x7f15630317ab in weston_backend_init ../libweston/backend-drm/drm.c:3162
#8 0x7f1566025b61 in weston_compositor_load_backend ../libweston/compositor.c:8201
#9 0x7f156640cb9e in load_drm_backend ../compositor/main.c:2596
#10 0x7f156641193c in load_backend ../compositor/main.c:3079
#11 0x7f1566413cc3 in wet_main ../compositor/main.c:3356
#12 0x562ba484b179 in main ../compositor/executable.c:33
#13 0x7f156624fcc9 in __libc_start_main ../csu/libc-start.c:308
But also use the launcher interface to actually close the DRM fd, in
mirror to what weston_launcher_open() does.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The DRM backend uses changes in the cursor view memory address and
surface damage to detect when it needs to re-upload to a cursor plane
framebuffer.
However, when a cursor view is destroyed and then recreated, e.g., when
the pointer cursor surface is updated, the newly created view may have
the same memory address as the just destroyed one. If no new cursor
buffer is provided (because it was attached, committed and used
previously) when this address reuse occurs, then there also isn't any
updated surface damage and the backend doesn't update the cursor plane
framebuffer at all.
To fix this issue utilize the destroy signal to track when the cursor
view is destroyed, and clear the cached cursor_view value in drm_output.
After clearing the cached value, the next cursor view is always
considered new and thus uploaded to the plane properly.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Remove all the backend code to support drivers without universal planes.
From[1]:
"The code needed to support kernels where DRM does not support uiniversal
planes makes the DRM-backend a little more complicated, because it needs
to create fake planes for primary and cursor. The lifetimes of the fake
planes does not match the lifetime of "proper" planes, which is surprising."
And since the universal planes left the experimetal flag in 2014[2] it is
safe to remove the support now.
[1] https://gitlab.freedesktop.org/wayland/weston/-/issues/427
[2] https://cgit.freedesktop.org/drm/drm-tip/commit/?id=c7dbc6c9ae5c3baa3be755a228a349374d043b5b
Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
From now on, when we can't know the modifiers supported for a certain
format, we add DRM_FORMAT_MOD_INVALID to its modifier set.
There is some parts where nothing is being added an others where
DRM_FORMAT_MOD_LINEAR is being added, so fix them.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In commit "libweston: add struct weston_drm_format" struct
weston_drm_format and its helper functions were added to libweston.
Also, unit tests for this API have been added in commit "tests: add unit
tests for struct weston_drm_format".
Start to use this API in the DRM-backend, as it enhances the code by
avoiding repetition and ensuring correctness.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
Co-authored-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In the absence of universal planes support,
drm_output_find_special_plane() sets the plane format to zero as a
placeholder. Then in drm_output_init_planes() it sets the format to
output->gbm_format.
As output->gbm_format is already set by the time we call
drm_output_find_special_plane(), simply set the plane format to it
directly in this function. This makes the code clearer, as there is no
reason to use the placeholder.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Tearing down the drm-backend when there are no input devices, would call
for the gbm device destruction before compositor shutdown. The latter
would call into the renderer detroy function and assume that the
EGLDisplay, which was created using the before-mentioned gbm device, is
still available. This patch re-orders the gbm destruction after the
compositor shutdown when no one would make use of it.
Fixes: #314
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
This header is for sharing fallback definitions for drm_fourcc.h. A new
test in tests/yuv-buffer-test.c is going to be needing XYUV8888 format,
and more new formats will be expected with HDR supports.
Share these fallback definitions in one place instead of copying them
all over.
All users of drm_fourcc.h are converted to include weston-drm-fourcc.h
instead for consistency: have the same definitions available everywhere.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The renderer must be called for any pending screen capture to complete.
Previously this was guaranteed by weston_screenshooter_shoot() forcing
full output damage, so damage was never empty. If the future,
screenshooting stops inflicting damage, and the damage on the primary
plane even after disabling hardware planes may be empty.
This patch ensures that screenshots do not get stuck until damage
occurs.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Without this patch, the DRM-backend would rewrite the 'require-input',
core section option given by the user.
This removes 'continue_without_input' DRM-backend option and takes into
consideration the cmd line option only if that was passed (Pekka Paalanen).
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Rework some functions in `drm.c` to reuse the `drmModeRes` and
reduce the usage of `drmModeGetResources` and `drmModeGetResources`.
Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Recognize writeback connectors and add 'struct drm_writeback'
objects in order to store them.
These objects are created and stored in a list by the time
that DRM-backend is initialized. This list is updated if a
writeback connector dynamically appears or is disconnected.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Instead of directly creating heads for the connectors in functions
drm_backend_create_heads() and drm_backend_update_connectors(),
add drm_backend_add_connector() that will handle this.
This split makes the code look better and will also make our lives
easier when we introduce writeback connectors.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Add helper function resources_has_connector(), what makes
the function drm_backend_update_connectors() look better.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
To deal with appearing/disappearing connectors we have the
function drm_backend_update_heads(). Rename it to
drm_backend_update_connectors(), as it is more in line with
what it does.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In case of success, drm_head_create() and drm_head_update_info()
take ownership of a connector. As this is an important
information, update the description of these functions
to include this.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
The function drm_connector_assign_connector_info() should
not be calling functions to handle drm_head, as connectors
and heads are not the same thing after patch "drm-backend:
move connector data from struct drm_head to struct drm_connector".
Move drm_head specific calls to drm_head_update_info(). This
is more in line with the hierarchy of the objects and also
allow us to drop drm_head pointer from drm_connector.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Instead of calling drmModeGetConnector() in drm_head_create()
and drm_head_update_info(), it is better to call it in
drm_backend_create_heads() and drm_backend_update_heads().
Then we can pass the drmModeConnector object as parameter.
This does not change the behavior of the code, but help us
to avoid unnecessarily calling drmModeGetConnector().
Besides that, in the future we will have support for writeback
connectors. And so drm_backend_create_heads() will be reworked
to also populate a list of writeback connectors. To make this
work, we are going to need to know if a connector is of the
writeback type or not, to know if we should call drm_head_create()
or drm_writeback_create(). We can only tell the type of connector
if we have the drmModeConnector object.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Instead of calling drmModeObjectGetProperties() each time that we need
the connector properties, it is better to keep a reference for it in
struct drm_connector. This reference is only updated when is necessary.
E.g. hotplug events.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This is the first step in order to add support for writeback
connector in Weston. We don't want writeback connectors data
to be stored in 'struct drm_head' objects, as these objects are
used to output content and we should not use writeback connectors
for this purpose.
The writeback connectors will be stored in a new 'struct
drm_writeback', but the connector data is common between
'struct drm_head' and 'struct drm_writeback'.
So move connector data from 'struct drm_head' to 'struct
drm_connector'. This helps to avoid code duplication and makes
the code clearer.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In commit c1e89ba2 "compositor-drm: move connector fields into
drm_head" the function drm_head_assign_connector_info() was
introduced. By that time it was being used only at drm_head
creation, and not to handle connector changes.
In d2e6242e "compositor-drm: create heads for all connectors"
it started to be used also to handle connector changes. In
this scenario we replace old connector props with newer data.
Before doing this, free the old connector data to avoid memory
leak.
Note that as drm_property_info_free() is safe to be called on
a zero-initialized struct, we can call it even in the case where
the head is being created and there are no props yet.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Commit "drm-backend: move code to init/deinit planes to specific
functions" lost a chunk of drm_output_deinit() when moving code into
drm_output_deinit_planes(). Reinstate the missing chunk.
This fixes an endless loop over weston_compositor::plane_list when you
start with three monitors connected, unplug and re-plug one.
Fixes: 3be23eff99
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
After commit "drm-backend: move code to init/deinit planes to specific
functions" we have a specific function to init planes. As this function
does not set output->crtc, it should not set it to NULL in case of
failure. This is caller's responsibility.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
There are some places where we can make some cosmetic changes
to make code simpler and easier to read. Make these cosmetic
changes. Note that they do not change the code behavior.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
The code to init/deinit scanout and cursor planes was in
drm_output_init() and drm_output_deinit(). Move this code
to specific functions drm_output_init_planes() and
drm_output_deinit_planes(), as it makes the code clearer
and easier to maintain.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Now that we have a CRTC list in the DRM-backend, we can
iterate through it and look for the CRTCs that do not have
assigned outputs in order to find unused CRTCS.
So we can drop unused_crtcs from struct drm_backend and also
drop the functions drm_backend_update_unused_outputs() and
wl_array_remove_uint32().
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
There are no 'struct drm_output' for CRTCs that are not active.
Also, CRTC data lives in 'struct drm_output'. This is causing
us some trouble, as the DRM-backend needs to program those
unnactive CRTCs to be off.
If the DRM-backend had the reference for every CRTC (being
active or not), it would make certain functions (e.g.
drm_pending_state_apply_atomic()) more simple and efficient.
Move CRTC data from 'struct drm_output' to 'struct drm_crtc',
as this is the first step to allow the DRM-backend to have
references for every CRTC.
Also, add list of CRTCs to DRM-backend object. Now the
DRM-backend is responsible for allocating/deallocating the CRTC
objects. The outputs will only reference, init and fini the CRTCs
in this list.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Initially finish_frame() was never called in drm_output_update_complete() for
'dpms_off_pending = true'. This is wrong for repaint_status ==
REPAINT_AWAITING_COMPLETION and that was fixed in
68d49d772c ("compositor-drm: run finish_frame when
dpms is turned off in update_complete").
However finish_frame() may now be called for repaint_status !=
REPAINT_AWAITING_COMPLETION, which is not allowed and results in a failed
assertion.
Fix this by checking dpms and repaint_status unconditionally.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
It seem that we skipped to put back in TEXT mode the tty, in case a DRM
device node wasn't present at that time, or it isn't present at all. This
orders the destroy part correctly as to handle that case as well.
As a side effect, as the tty will still be set to GRAPHICS mode we will
require a manual change of the tty number, which might be not possible
on all systems. Properly putting back the tty to TEXT mode should avoid
that, and allows to re-use the same tty no in case the DRM device has
been created at a later point in time.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Allow to disable GBM modifiers at runtime using the environment variable
WESTON_DISABLE_GBM_MODIFIERS.
This can be useful for debugging or when modifiers cause issues, e.g. in
case modifiers use higher memory bandwidth and hence impose a lower
resolution limit as it is the case with Intel Kaby Lake graphics.
Related to: https://gitlab.freedesktop.org/wayland/weston/-/issues/404
Signed-off-by: Stefan Agner <stefan@agner.ch>
When dissociating a universal plane from a crtc, we currently don't
reset the current state of the plane (plane->state_cur). When attempting
to use this plane in the future, we can run into invalid memory accesses
due to left over associations with potentially freed drm backend
objects. This commit resets the state of the scanout and cursor
universal planes associated with a crtc.
The following scenario exhibits the problem:
1. Start a (fullscreen) client that is suitable for and assigned to
the scanout plane. The plane's state_cur->output value is set.
2. Unplug the monitor: the scanout plane is "released" but still
maintains the state_cur->output association.
3. Replug the monitor: the plane is deemed unavailable due to an
existing, albeit invalid, state_cur->output value. Note the memory
errors trying to access the drm_output which was freed at step (2).
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
This moves the creation of the blob to be earlier, to when the damage is
calculated. It replaces the damage tracked inside of the plane state
with the blob id itself.
This should stop creating new blob ids for TEST_ONLY commits, and them
being leaked in general, as the blob ids are now freed with the plane
state.
The FB_DAMAGE_CLIPS property is now always set if it's supported, and
will be 0 in the case that we have no damage information, which
signifies full damage to the kernel.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
In the test suite we may want to run a DRM-backend test on a
non-default seat, which may not have a input device associated.
Weston's default behavior is to not open if input devices are
not found, as it may cause troubles. For instance, Weston can
open but if no input device is set than the user can not
interact or leave it.
Add flag --continue-without-input to DRM-backend so we can run
these types of tests with no input. Notice that this won't force
the compositor to skip opening a input device if it finds it on
the non-default seat.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Without universal plane, the weston crashes with null pointer access in
set_gbm_format function because that function called before output
enable function. By changing timing to set color format for primary
plane in this case, this issue fixes.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
pixman_renderer_output_create currently takes a flags enum bitmask for
its options. Switch this to using a structure, so we can introduce other
non-boolean options.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The renderer buffer size is usually the same size as the current mode,
so we were taking the dimensions from the currently-set mode. However,
using current_mode is quite confusing in places when it comes to scale,
and it also hampers our ability to do mode switches, as well as to
introduce a future option which will let the renderer use a smaller
buffer than the output and display scaled.
Simply take the dimensions of the renderer's output buffer from the
buffer itself.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This condition inside drm_output_render() checks if we can reuse the
existing renderer buffer for the primary plane; this occurs in
mixed-mode composition where a client buffer promoted to a plane has
changed, but the primary plane is unchanged.
We accomplish this by checking if there is no damage on the
primary/renderer plane, and then if there is already a renderer buffer
active on the primary plane: in that case, we can reuse the buffer we
already have.
There was a further condition checking if the width and height were
identical. This was designed to prevent against issues on mode changes.
However, runtime mode changes are already quite broken, and a mode
change will also cause damage on the full plane. We can simply remove
this condition.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Commit "weston-log: add function to avoid direct
access to compositor members in non-core code" added the
function weston_compositor_add_log_scope mainly to allow
libweston users to avoid direct accessing core structs, as
weston_compositor.
Replace weston_log_context_add_log_scope usage by
weston_compositor_add_log_scope.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
There's a function named weston_compositor_log_scope_destroy()
but it doesn't take a struct weston_compositor argument.
Rename it to weston_log_scope_destroy(), as the argument is a
struct weston_log_scope.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
There's a function named weston_compositor_add_log_scope()
but it doesn't take a struct weston_compositor argument.
Rename it to weston_log_ctx_add_log_scope(), as
the log_scope is being added to a log_context.
Also, bump libweston_major to 9.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Remove unnecessary ifdefs for DRM_MODE_CONNECTOR_DSI, DRM_MODE_CONNECTOR_DPI.
They are both provided by libdrm and were introduced long before 2.4.83 (the
lowest version we currently support).
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
This is based on the assumption that overlays are in between cursor and
primary plane and it is required to be able to assign views to planes,
even if the driver doesn't not expose such property.
As we hard-code them as immutable the commit part would not need any
further modifications.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
Functional no change, as nobody makes use of it. Only apply the zpos
value if the zpos property is mutable (that is, zpos_max and zpos_min
are not the same).
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Derek Foreman
Marius Vlad
Alexandros Frantzis
Igor Matheus Andrade Torrente
Leandro Ribeiro
Scott Anderson
Pekka Paalanen
Michael Olbrich
Stefan Agner
Tomohito Esaki
Daniel Stone
Leandro Ribeiro
Emmanuel Gil Peyrot