Instead of setting state members directly in the drm_output_render
functions (to paint using Pixman or GL), just return a drm_fb, and let
the core function place it in state.
This brings damage handling in line with repaint state, so we do not
clear damage if repaint fails.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Call drm_output_render unconditionally, doing an early exit if we're
already rendering a client buffer on the primary plane.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
'next' is used as a framebuffer which has either been rendered but not
had a configuration request (pageflip or CRTC set) applied to it, or
when for a framebuffer that has had configuration requested but not
applied (delayed pageflip where the event has not been applied).
'current' is used as the last framebuffer for which we know
configuration has been fully applied, i.e. CRTC set executed or pageflip
requested and event received.
Rename these members to fb_current and fb_pending, doing some small
reordering of drm_output whilst in the vicinity.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Now that we have better types in drm_fb, use it for cursor buffers as
well. This gives us easier refcounting for our cursors, as well as a
unified buffer-destruction path.
Currently this makes no difference, as the KMS legacy cursor update API
uses GEM names directly, and never touches DRM FBs. However, the cursor
plane becomes a regular KMS plane under atomic, at which point we
require DRM FBs.
Take the opportunity to move to drm_fb ahead of time.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Sometimes we need to duplicate an existing drm_fb, e.g. when
pageflipping to the same buffer to kickstart the repaint loop. To handle
situations like these, and simplify resource management for dumb and
cursor buffers, refcount drm_fb.
drm_fb_get_from_bo has a path where it may reuse a drm_fb, if the BO has
been imported and not released yet. As drm_fb_unref now relies on actual
refcounting (backed up by asserts), we add a balancing drm_fb_ref() to
the path where we return a reused drm_fb.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We only need it for the GBM surface the FB was originally created
against; a mismatch here is very bad indeed, so no reason to pass it in
explictly every time rather than store it.
Following patches change drm_fb to be explicitly reference counted; in
order to reduce churn, rename drm_output_release_fb to drm_fb_unref
whilst changing its call signature here, even though it does not yet
actually perform reference counting.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The drm_fb destroy callback to mostly the same thing regardless of
whether the buffer is a dumb buffer or gbm buffer. This patch refactors
the common parts into a new function that can be called for both cases.
[daniels: Rebased on top of fb->fd changes, cosmetic changes.]
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This uses the new pixel-format helpers, so we can also replace depth/bpp
with these.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalaneN@collabora.co.uk>
Rather than magically trying to infer what the buffer is and what we
should do with it when we go to destroy it, add an explicit type
instead.
In doing so, the test for dumb images (destroying them, but only if
they're not the 'live' ones) is removed. This was dead code, as the only
path which could cause us to shuffle images is drm_output_switch_mode.
This calls drm_output_release_fb before the images are reallocated in
drm_output_fini_pixman / drm_output_init_pixman, with the reallocation
unconditionally destroying the images, so can never be hit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Make drm_output_set_cursor more deterministic, by calculating more state
and performing more plane manipulation, inside
drm_output_prepare_cursor_view.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Rather than duplicating knowledge of pixel formats across several
components, create a custom central repository.
Signed-off-by: Daniel Stone <daniels@collabora.com>
[Pekka: fix include paths and two copy-pastas]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
HAVE_LIBDRM was used as a condition for the launcher infrastructure to
call libdrm.so functions. It was set by an independent test for libdrm,
which would silently continue if libdrm was not found. It was assumed
that if you enabled a feature that used libdrm at runtime, the test for
that feature would imply that HAVE_LIBDRM is also set. This was quite
subtle.
The only feature that actually uses libdrm.so at runtime is the DRM
backend. No other backend needs the libdrm calls in the launcher
infrastructure.
Therefore to simplify things, stop using HAVE_LIBDRM and use
BUILD_DRM_COMPOSITOR instead. If you enable the DRM compositor, you
automatically also get libdrm support in the launchers.
There are still things depending on LIBDRM_CFLAGS and LIBDRM_LIBS, so
the test cannot be removed completely.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
This way Wayland compositors will be aware of Weston's
"visible bounds" (and ignore its shadows).
Signed-off-by: Sergi Granell <xerpi.g.12@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
If wayland_output_create_common returns NULL, it means that
the output creation failed.
Signed-off-by: Sergi Granell <xerpi.g.12@gmail.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
struct wayland_output::name was used but never initialized.
Also zxdg_toplevel_v6_set_title was only called for windowed outputs,
and some compositors let you see the client's name even when it is
fullscreen (GNOME Shell's Activities menu for example).
So rename struct wayland_output::name to struct wayland_output::title and
precompute it on wayland_output_create_common(), so it can be later used
on xdg's set_title and frame_create.
v2: Move zxdg_toplevel_v6_set_title() before the wl_surface_commit()
as per Quentin Glidic's suggestion.
Signed-off-by: Sergi Granell <xerpi.g.12@gmail.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
When the wheel tilt source is present, gcc complains that we don't
handle all possible enumeration values. We already ensure this cannot
happen in its only caller (handle_pointer_axis), but gcc doesn't
recognise this. Give it a default value to quiet the warning.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Implement new repaint_begin and repaint_flush hooks inside
weston_backend, allowing backends to gang together repaints which
trigger at the same time.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
In preparation for grouping output repaint together where possible,
switch the per-output repaint timer, to a global timer which iterates
across all outputs.
This is implemented by storing the absolute time for the next repaint
for each output locally, and maintaining a global timer which iterates
all of them, scheduling the repaint for the first available time.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
[Pekka: The comment about 1 ms delay.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
glibc 2.25 produces a warning when sysmacros.h is not directly included
but major() is used, as it is intended to be moved to sysmacros.h and
only there. Include it to keep the build happy.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
repaint_scheduled is actually cleverly a quad-state, disguised as a
boolean. There are four possible conditions for the repaint loop to be
in at any time:
- loop idle; no repaint will occur until specifically requested, which
may be never (repaint_scheduled == 0)
- loop schedule to begin: the loop was previously idle, but due to a
repaint-schedule request, we will call the start_repaint_loop hook
in the next idle task
- repaint scheduled: the compositor has definitively scheduled a
repaint request for this output, which will occur in fixed time
- awaiting repaint completion: the backend has not yet signaled
completion of the last repaint request, and the compositor will not
schedule another until it does so
All but the first condition were previously conflated as
repaint_scheduled == 1, but break them out into separate conditions to
aid clarity, backed up by some asserts.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
On startup, we cannot lock on to the repaint timer because it is unknown
to us. We deal with this by claiming that the moment of entry into the
repaint loop is the moment a frame returned, causing finish_frame to
delay our initial repaint to (refresh_time - repaint_delay), typically
around 9ms of utterly wasted time.
Add an explicit stamp == NULL, to determine that we are just beginning
our repaint loop, that the timings are in fact totally invalid, and that
it would be beneficial to repaint the output immediately. This will only
trigger when the display had previously been disabled or the previous
state is unknown, e.g. at startup, or coming back from DPMS off.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Rather than determining the time until next-frame repaint in relative
space (time until repaint), determine it first in absolute space, and
then later convert this to relative.
This will later allow us to store these per-output, so we can have a
single idle timer which will allow us to aggregate multiple repaints
together when timing allows.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Paralleling timespec_to_nsec, converts to milliseconds.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
[Pekka: added doc about flooring]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Weston will not repaint until previous update has been acked by a
pageflip event coming from the drm driver. However, some buggy drivers
won’t return those events or will stop sending them at some point and
Weston output repaints will completely freeze. To ease developers’ task
in testing their drivers, this patch makes compositor-drm use a timer
to detect cases where those pageflip events stop coming.
This timeout implementation is software only and includes basic
features usually found in a watchdog. We simply exit Weston gracefully
with a log message and an exit code when the timout is reached.
The timeout value can be set via weston.ini by adding a
pageflip-timeout=<MILLISECONDS> entry under [core]
section. Setting it to 0 disables the timeout feature.
v2:
- Made sure we would get both the pageflip and the vblank events before
stopping the timer.
- Reordered the error and success cases in
drm_output_pageflip_timer_create() to be more in line with the rest
of the code.
v3:
- Reordered (de)arming of the timer with the code around it to avoid it
being rearmed before the current dearming.
- Return the proper value for the dispatcher in the pageflip_timeout
callback.
- Also display the output name in case the timer fires.
v4:
- Reordered a forgotten timer rearming after its drmModePageFlip().
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=83884
Signed-off-by: Frederic Plourde <frederic.plourde at collabora.co.uk>
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Makes the code easier to read and browse through.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Don't import buffers which span multiple outputs, short-cut any attempt
to import SHM buffers, and ignore buffers with a global alpha set.
I'm not convinced all of these conditions entirely make sense, but this
at least makes them equally nonsensical.
Differential Revision: https://phabricator.freedesktop.org/D1414
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
And properly deconstruct it in drm_output_destroy.
Might be useful for finding out which modes are supported
before even setting them, in case we want to extend the
modesetting API.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Previously in picking CRTC -> encoder -> connecting routing, we went for
the first triplet we found which claimed to work.
Preserving the existing routing means that startup will be faster: on a
multi-head system, changing the routing implies disabling both CRTCs,
then re-enabling them with a new configuration, which may involve
retraining links etc.
Furthermore, the existing routing may be set for a reason; each
CRTC/encoder is not necessarily as capable as the other, so the routing
may be configured to stay within such device limits.
Try where possible to respect the routing we pick up, rather than
blithely configuring our own.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Given that we can have render-only devices, or vgem in a class of its
own, ignore any non-KMS devices in compositor-drm's device selection.
For x86 platforms, this is mostly a non-issue since we look at the udev
boot_vga issue, but other architectures which lack this, and have
multiple KMS devices present, will hit this.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reported-by: Thierry Reding <treding@nvidia.com>
Reported-by: Daniel Vetter <daniel.vetter@intel.com>
A handful of source files were not using the MIT Expat text in
COPYING. Update these files to bring them inline with the rest,
standardizing on the MIT Expat text.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Remove the last usage of connector_allocator, which was to check for
displays which have been hot-unplugged, and replace it with an array
which doesn't rely on the connector IDs remaining below 32 (or 64).
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reported-by: Peter Senna Tschudin <peter.senna@collabora.com>
Rather than using connector_allocator to determine whether an output is
newly connected or not, use a list walk across all outputs instead.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reported-by: Peter Senna Tschudin <peter.senna@collabora.com>
crtc_allocator was used as a bitmask of CRTC IDs, so we didn't try to
use the same CRTC for multiple outputs. Unfortunately, this only works
to the extent that CRTC object IDs fit within the bitmask; though they
were previously, they are not guaranteed to be under 32 or even 64.
Replace the only use of crtc_allocator with a list walk across outputs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reported-by: Peter Senna Tschudin <peter.senna@collabora.com>
When a client changes the subsurfaces state, we need to damage
them so the result is visible. We do that by flagging the surfaces
when the state changes and causing damage when committing the
state. This prevents normal repaints from considering these changes
until a commit has happened, and allows the client to atomically
schedule several changes.
This fixes the subsurface_z_order test, which is now marked as expected
to succeed.
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Micah Fedke <micah.fedke@collabora.co.uk>
The connector option is a part of drm_backend struct.
Therefore, it is not needed to pass it as an argument
to create_outputs function.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
weston can be started with --connector option to be initialized
with a particular output. But in the update_outputs this option
is not considered and output is created for all the available
connectors. This patch fixes this issue by considering
the option for connectors in the update_outputs.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
This patch checks the attribute flags on incoming dmabufs and refuses to
put them overlays if they have any of the flags set (currently:
ZWP_LINUX_BUFFER_PARAMS_V1_FLAGS_Y_INVERT,
ZWP_LINUX_BUFFER_PARAMS_V1_FLAGS_INTERLACED and
ZWP_LINUX_BUFFER_PARAMS_V1_FLAGS_BOTTOM_FIRST), instead defaulting to
the gl-renderer which can handle some of the flags.
This check should be superceded by buffer transforms, when they become
available.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Given that it's used by clients, it's really the very definition of
shared.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
repaint_needed / repaint_scheduled are surprisingly subtle. Explode the
conditional with side-effects into more obvious separate calls, and
document what they do.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Daniel Stone
Tomohito Esaki
Pekka Paalanen
Raúl Peñacoba
Sergi Granell
Emmanuel Gil Peyrot
Emil Velikov
Armin Krezović
Yong Bakos
Giulio Camuffo
Emilio Pozuelo Monfort
Ucan, Emre (ADITG/SW1)
Micah Fedke
Bryce Harrington