This patch adds the maximize button to the window frame for the windows
which set the MWM_DECOR_MAXIMIZE hint, and it wires it with the shell
via a new method in weston_shell_interface.
Additionally, it also listens for the wm hints coming from the client,
but it doesn't support maximizing a window only vertically or horizontally.
The window will be maximized only when both directions are maximized.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
PRESENTATION_FEEDBACK_KIND_ZERO_COPY is a flag that needs to be set for
each surface separately. Some surfaces may be zero-copy (as defined by
Presentation feedback) while some are not.
A complication with Weston is that a surface may have multiple views on
screen. All copies (views) of the surface are required to be zero-copy
for the ZERO_COPY flag to be set.
Backends set per-view feedback flags during the assing_planes hook, and
then Weston core collects the flags from all views of a surface.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Change weston_output_finish_frame() signature so that backends are
required to set the flags, that will be reported on the Presentation
'presented' event. This is meant for output-wide feedback flags. Flags
that vary per wl_surface are subject for the following patch.
All start_repaint_loop functions use the special private flag
PRESENTATION_FEEDBACK_INVALID to mark, that this call of
weston_output_finish_frame() cannot trigger the 'presented' event. If it
does, we now hit an assert, and should then investigate why a fake update
triggered Presentation feedback.
DRM:
Page flip is always vsync'd, and always gets the completion timestamp
from the kernel which should correspond well to hardware. Completion is
triggered by the kernel/hardware.
Vblank handler is only used with the broken planes path, therefore do
not report VSYNC, because we cannot guarantee all the planes updated at
the same time. We cannot set the INVALID, because it would abort the
compositor if the broken planes path was ever used. This is a hack that
will get fixed with nuclear pageflip support in the future.
fbdev:
No vsync, update done by copy, no completion event from hardware, and
completion time is totally fake.
headless:
No real output to update.
RDP:
Guessing that maybe no vsync, fake time, and copy make sense (pixels
sent over network). Also no event that the pixels have been shown?
RPI:
Presumably Dispmanx updates are vsync'd. We get a completion event from
the driver, but need to read the clock ourselves, so the completion time
is somewhat unreliable. Zero-copy flag not implemented though it would
be theoretically possible with EGL clients (zero-copy is a per-surface
flag anyway, so in this patch).
Wayland:
No information how the host compositor is doing updates, so make a safe
guess without assuming vsync or hardware completion event. While we do
get some timestamp from the host compositor, it is not the completion
time. Would need to hook to the Presentation extension of the host
compositor to get more accurate flags.
X11:
No idea about vsync, completion event, or copying. Also the timestamp is
a fake.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Logging is activated and deactivated with the debug key binding 't'.
When activated, it creates a new log file, where it records the events.
The log file contains events and detailed object information entries in
JSON format, and is meant to be parsed in sequence from beginning to the
end.
The emitted events are mostly related to the output repaint cycle, like
when repaint begins, is submitted to GPU, and when it completes on a
vblank. This is recorded per-output. Also some per-surface events are
recorded, including when surface damage is flushed.
To reduce the log size, events refer to objects like outputs and
surfaces by id numbers. Detailed object information is emitted only as
needed: on the first object occurrence, and afterwards only if
weston_timeline_object::force_refresh asks for it.
The detailed information for surfaces includes the string returned by
weston_surface::get_label. Therefore it is important to set
weston_timeline_object::force_refresh = 1 whenever the string would
change, so that the new details get recorded.
A rudimentary parser and SVG generator can be found at:
https://github.com/ppaalanen/wesgr
The timeline logs can answer questions including:
- How does the compositor repaint cycle work timing-wise?
- When was the vblank deadline missed?
- What is the latency from surface commit to showing the new content on
screen?
- How long does it take to process the scenegraph?
v2: weston_surface::get_description renamed to get_label.
v3: reafctor a bit into fprint_quoted_string().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When printing out logs from Weston's actions, mainly for debugging, it
can be very difficult to identify the different surfaces. Inspecting
the configure function pointer is not useful, as the configure functions
may live in modules.
Add vfunc get_label to weston_surface, which will produce a short,
human-readable description of the surface, which allows identifying it
better, rather than just looking at the surface size, for instance.
Set the label function from most parts of Weston, to identify cursors and
drag icons, and panels, backgrounds, screensavers and lock surfaces, and
the desktop shell's application surfaces.
v2: renamed 'description' to 'label', so we get
weston_surface_set_label_func().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Most of the backends do their own parsing of transform strings, so let's
put that all in the same place (compositor.c/h)
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This reverts commit 5c11fc6fb7.
According to two input specialists, this was the wrong way:
http://lists.freedesktop.org/archives/wayland-devel/2014-November/018287.html
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Giulio Camuffo <giuliocamuffo@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Currently, once we've reached our main's wl_display_run(), we always
return ret=EXIT_SUCCESS when weston terminates through wl_display_terminate.
This patch makes it possible to specify another return value by setting
prior to terminating Weston. This is useful for automated tests that want
to report test failures to the overlying testing infrastructure.
Signed-off-by: Frederic Plourde <frederic.plourde@collabora.co.uk>
[Pekka: fixed some tabs.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
weston key bindings are supposed to eat the key events, and not pass it
on to clients, and indeed the wl_keyboard.key event is not sent. But
we must also not put the key in the keys array to pass to client with
the wl_keyboard.enter event, or else we may send the 'eaten' one too.
In the case of a key binding hiding a surface having the keyboard focus,
the shell may decide to give the focus to another surface, but that will
happen before the key is released, so the new focus surface will receive
the code of the bound key in the wl_keyboard.enter array.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The comments already call it bool, so let's just make it one
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This breaks weston_output_mode_switch() into 3 functions:
weston_output_mode_set_native()
weston_output_mode_switch_to_temporary()
weston_output_mode_switch_to_native()
Differences from previous behaviour:
SET_NATIVE didn't set current_scale (now it does)
SET_TEMPORARY could set mode and scale independently - now it can't.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Pekka Paalanen <pekka.paalanen@collabora.co.uk>
For functions that test if something is true/valid and return a 1
or 0, it makes sense to switch to bool.
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
With the more accurate definition of wl_surface roles in Wayland,
enforce the restriction: a role is always set permanently, and
attempting to change it is a protocol error.
This patch is based on Jasper's patch:
http://lists.freedesktop.org/archives/wayland-devel/2014-August/016811.html
The difference in this patch compared to his are:
- send role errors on the interface whose request triggers it, not on
wl_surface
- an interface could have several requests assigning different roles,
cannot use wl_interface as the unique key; use an arbitary string
instead
- ensure in window-manager.c that create_shell_surface() ->
create_common_surface() is never called with surface->configure set,
to avoid compositor abort
- use wl_resource_post_no_memory() where appropriate instead of
hand-rolling it with wl_resource_post_error()
Ideally we would not add weston_surface::role_name field, but use
weston_surface::configure. At the moment this is not possible though,
because at least shell.c uses several different roles with the same
configure function. Drag'n'drop uses two configure functions for the
same role. The configure hook is also reset in several places,
which is not good for role tracking.
This patch overlooks the wl_surface roles assigned in privileged
extensions: screensaver, panel, background, lock, input panel.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Add 'msc' field to weston_output to maintain the refresh counter, and
use it in presentation_feedback.presented.
Make compositor-drm update the per-output refresh counter with the
values reported by DRM. If the DRM reported value jumps backwards,
assume it wrapped around once.
Other backends do not update weston_output::msc, and there
presentation_feedback will always deliver refresh counter as zero.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v3 Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Implement the presentation.feedback request, and the
presentation_feedback protocol interface. Feedback information is
delivered to clients as the backend reports it, except the refresh
counter (MSC) which is always reported as zero.
Changes in v4:
* add 'flags' argument to 'presented' event without implementation
Changes in v5:
* remove the 'destroy' method implementation for feedback objects
[Pekka Paalanen: do not leak struct feedback.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v3 Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Add presentation clock setters that verify the given clock actually
works. Offer an automatic choice of a software fallback clock, when a
backend has to always use clock_gettime() to approximate the
presentation time.
The DRM backend already queried the DRM about the clock id, just let the
DRM backend set the presentation clock from that.
For all other backends which do not get a timestamp from the driver,
call the software clock setter to choose a suitable clock.
Report the chosen clock via presentation.clock_id event to clients.
In finish_frame(), upgrade the argument from uint32_t milliseconds to
struct timespec which can accurately hold the presentation clock values.
This will be needed when weston_output_finish_frame() starts to send out
presentation_feedback.presented events.
While at it, replace gettimeofday() calls with clock_gettime() using the
chosen presentation clock, so we manufacture presentation timestamps
from the presentation clock when the gfx drivers cannot give us a proper
timestamp.
Rpi patch is more verbose due to not having the compositor pointer
available in rpi_flippipe_update_complete(). Explicitly carry the clock
id with flippipe so it is available in the thread.
Changes in v4:
* rpi debug build fix
v4 Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v3 Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Most of the code only puts WL_EXPORT in .c files. Remove the few
instances in header files.
If it's missing form the associated .c, put it there instead.
The move_signal in weston_output isn't used, and not even initialized,
so anything trying to listen to it will crash on wl_signal_add().
Instead of it, the 'output_moved_signal' in weston_compositor is
used, so remove it.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This adds a function weston_keyboard_set_locks() which can be used to
change the state of the num lock and the caps locks, changing the leds too.
Only the evdev and libinput backends supports this, since it doesn't make
sense for embedded sessions.
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
weston_client_start() is a new wrapper around weston_client_launch(),
that does the process tracking on its own, and logs the process exit
status.
When users of weston_client_start() want to know when the process exits,
they should hook into the wl_client destroy signal. This works for cases
where the client is not expected to disconnect without exiting.
As wl_client destructor and the sigchld handler run in arbitary order,
it is usually difficult for users to maintain both struct weston_process
and a struct wl_client pointer. You would need to wait for both
destructor and handler to have run, before attempting to respawn the
client.
This new function relieves the caller from the burden of maintaining the
struct weston_process, assuming the caller is only interested in client
disconnects.
Cc: Boyan Ding <stu_dby@126.com>
Cc: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
this adds a mechanism to mask the views belonging to a layer
to an arbitrary rect, in the global space. The parts that don't fit
in that rect will be clipped away.
Supported by the gl and pixman renderer only for now.
This introduces a new struct, weston_layer_entry, which is now used
in place of wl_list to keep the link for the layer list in weston_view
and the head of the list in weston_layer.
weston_layer_entry also has a weston_layer*, which points to the layer
the view is in or, in the case the entry it's the head of the list, to
the layer itself.
Currently, there is a fun flicker when toggling maximization or
fullscreen on a window in mutter or more sophisicated compositors
and WMs.
What happens is that the client want so go maximized, so we
calculate the size that we want the window to resize to (640x480),
and then add on its margins to find the buffer size (+10 = 660x500),
and then send out a configure event for that size. The client
renders to that size, realizes that it's maximized, and then
says "oh hey, my margins are actually 0 now!", and so the compositor
has to send out another configure event.
In order to fix this, make the the configure request correspond to
the window geometry we'd like the window to be at. At the same time,
replace set_margin with set_window_geometry, where we specify a rect
rather than a border around the window.
This new structure is used for both weston_surface.pending and
weston_subsurface.cached.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Pekka Paalanen <ppaalanen@gmail.com>
send_configure was originally modelled after
wl_shell_surface::send_configure, which takes these arguments. However,
the X WM and xdg_surface::configure variants don't use these arguments.
We already store the resize edges for a surface while it's being
resized, so just use the saved state in the wl_shell_surface variant.
The CURSOR_PLANE capability indicates that the backend has a concept of a
cursor plane and can handle a cursor without compositing. This is currently
only advertised by the DRM backend.
The ARBITRARY_MODE flag specifies that the backend is capable of switching to
virtually any resolution. This is currently only advertised in the RDP
backend. While it's a bit buggy right now, it should be capable of this.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Bump wl_scaler and wl_viewport versions to 2. Add new requests
wl_viewport.set_source and .set_destination, which are meant to replace
wl_viewport.set request.
Now a client can set and unset just one of source rectangle and
destination size. Define the semantics when one of these is unset.
Implement these semantics changes in compositor and pixman renderer.
GL-renderer does not need changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Remove the explicit boolean variable, and use illegal width to denote
"not set".
Split the boolean into two, so we can later start having buffer.src_*
and surface.* set or not set independently. This may become useful when
the wl_viewport interface is changed to allow modifying them separately.
At the moment, both buffer.src_width and surface.width conditions are
always in sync.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Queueing in the Presentation extension requires splitting the viewport
state into buffer state and surface state. To conveniently allow
assigning only one, the other, or both, reorganize the
weston_buffer_viewport structure.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The client needs to know that the pointer is at a different position in
its surface. We can't send motion as that corresponds to the pointer
actually moving. Leaving the surface and entering at the new position
is a better semantic match and doesn't correspond to pointer motion
or user input.
https://bugs.freedesktop.org/show_bug.cgi?id=71927
This was always a little iffy. At least it could have been a signal,
but we now have focus signal, so lets just use that. We lose
the ability to detect unresponsive clients at key event time, but we
could add that back by adding a key_signal.
Remove the listener for output destroy from weston_view and instead
iterate views owned by the shell in its own output destroy listener.
This simplifies the code a bit since keeping the view listening for the
destroy on the right output was a bit complicated. This also removes the
function pointer output_destroyed from weston_view. The only user for it
was desktop shell, but now this is all handled in shell.c.
Since that signal is per output, it is necessary to track in which
output a view is in so that the signal is handled properly.
Instead, add a compositor wide output moved signal, that is handled by
the shell. The shell iterates over the layers it owns to move views
appropriately.
This seems like a better name, and will not conflict if someone later
extends wl_surface with a request scaler_set (yeah, unlikely).
This code was written by Jonny Lamb, I just diffed his branches and made
a patch for Weston.
Cc: Jonny Lamb <jonny.lamb@collabora.co.uk>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
With multiple touch screens on one seat, the touch points IDs from the
different evdev devices may overlap. We have to remap the IDs we forward
to core weston so that the touch points all have unique IDs within the seat.
Closes: https://bugs.freedesktop.org/show_bug.cgi?id=73003
Implements wl_surface_scaler.set by setting desired
src_{x,y,width,height} and dst_{width,height} values in the
weston_buffer_viewport struct, then altering coordinates in
weston_surface_to_buffer* functions if there is a scaler set for said
surface.
Surfaces that are created by clients get their size automatically updated
by the attach/commit. Surfaces created directly by shells (such as black
surfaces) sometimes need to be manually resized. This function allows you
to do that while being somewhat less messy than messing with the internals
of weston_surface manually.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
If the saved position for a fullscreen or maximized output view is in an
output that has been unplugged, the coordinates don't make sense
anymore. In that case, invalidate them and use the initial position
algorithm when changing them back to the basic state.
Signed-off-by: Zhang, Xiong Y <xiong.y.zhang@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Previously, if a pointer was inside an output that was unplugged, it
could potentialy end up outside any valid output forever. With this
patch, the pointer is moved to the "closest" output to the pointer.
Set a flag when an output is being destroyed and use that to avoid
repainting. This allows functions that schedule an output repaint to
be called when the output is being destroyed without causing the
compositor to crash.
Giulio Camuffo
Pekka Paalanen
Pekka Paalanen
Derek Foreman
Frederic Plourde
Jonny Lamb
Jasper St. Pierre
Jason Ekstrand
George Kiagiadakis
Kristian Høgsberg
Jonas Ådahl
Ander Conselvan de Oliveira
Zhang, Xiong Y