Scale is calculated as float and to be inf. It shall be avoided by,
ivi_layout_surface_set_source/destination_rectangle. So output log and
then return this method to use prevous scale for fail safe.
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
ivi_layout_surface_configure is called from ivi-shell when configure
listener of weston surface is triggered. This function shall do,
- emit signal to hmi-controller to notify the configuration change
Other unnecesary logics are cleaned up.
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The reason why the result is not output in the method is that it avoids
to have dependency on CAIRO. If user want to output it to file, user
shall link CAIRO on its controller.
ivi_layout_surface_get_size is also supported here because user needs
stride to call ivi_layout_surafce_dump.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If you do an out-of-tree build, all the images will be left in the
srcdir. Fix their paths.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
The ivi-shell / hmi-controller cannot run without a properly populated
config file. Generate a config file especially for tests, which includes
paths to the build dirs.
The generated file will be used by following patches adding ivi-shell
tests.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
When loading a controller module, if we do not find a
controller_module_init symbol, return failure to the caller instead of
ignoring the failure.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
This will be useful for tests, where we use --no-config, but ivi-shell
needs load the controller module from somewhere.
We are not making hmi-controller.so the default, because this patch
should allow running the tests also with another controller.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Let's me easily exit ivi-shell when testing with the DRM-backend.
Only available in ivi-shell developer mode.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Add a weston.ini option for ivi-shell to enable "developer mode".
When developer mode is enabled, hook up the debug key bindings.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Thanks Pekka for pointing that out.
Signed-off-by: Carlos Olmedo Escobar <carlos.olmedo.e@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
of application launching. This is because cancel callback is mistakenly
set to weston_touch_grab_interface. To fix this issue, add a
callback, touch_move_workspace_grab_frame and set it to the
weston_touch_grab_interface like desktop-shell.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
This fixes the breakage caused by "ivi-shell: make ivi-layout.c as a
part of ivi-shell.so"
hmi-controller.c:
A reference implementation of controller module does not use the layout
functions directly. This get function pointers at controller_module_init
which called by ivi-shell.
ivi-layout-export.h:
Definition of interfaces in a struction: ivi_controller_interface.
function pointers are set at ivi-layout.c.
ivi-layout-private.h:
Definition of some interfaces are remove bucause it is implemented in
ivi-layout.c and set it as function pointer. Several interfaces are kept
here because they are implemented in ivi-layout.c/transition.c but used
in other files.
ivi-layout-transition.c:
remove WL_EXPORT because export is not needed anymore.
remove unnesesary unsed method.
ivi-shell.c:
call controller_module_init of hmi-controller to init it and set
function pointers. If the interface_version is equal or
greater than what hmi_controller was built with, things are pass.
If the interface_version is smaller than what the controller expects,
it has to fail because it cannot work. This is followed the manner,
- never remove a function pointer
- never modify an existing function signature
- additions are allowed at the end of struct ivi_controller_interface
- all function pointers must always be populated and working in
ivi-shell.so (ivi-layout.c etc.)
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
ivi-layout.so is separately built and loaded by using dlopen with
RTLD_GLOBAL. This was because these apis defined in ivi-layout.so shall
be used by ivi-modules; e.g. hmi-controller. This shall be improved that
a struct ivi_layout_api contains the whole exported API as function
pointers to be exposed as module_init.
This patch alone builds, but loading controller modules at runtime
failes. This failure will be fixed by following patches.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Interfaces for properties setting shall be implemented in ivi-layout.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
In the future, re-alignmenet of WL_EXPORT per method should be done.
For that work, re-ordering is required to be used by another method.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
ivi_layout_transition_layer_render_order is not necesary called. Remove
the method and methods called by it.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When ivi-module is not set in weston.conf, we probably want to tell the
user about their error instead of just dying.
Signed-off-by: Ondřej Majerech <majerech.o@gmail.com>
[Pekka: include Tanibata's suggestion, fix file name, fix surrounding
coding style]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- introduces ivi-shell/input-panel-ivi.c which is basically copied
from desktop shell. It shall be improvaded to remove duplicate
implementation.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- hmi-controller.so
- introduces hmi-controller.so
The library is used to manage layout of surfaces/layers. Layout change
is triggered by ivi-hmi-controller protocol, ivi-hmi-controller.xml. A
reference how to use the protocol, see ivi-shell-user-interface.c.
In-Vehicle Infotainment system usually manages properties of
surfaces/layers by only a central component which decide where
surfaces/layers shall be. This is differenct use case from desktop
style; each application can request property of its window via xdg-shell
protocol, like fullscreen and set its to top level. In-Vehicle
Infortainment system doesn't allow each application to chagen them from
its application because of safty reasons. The concept of layer is
simillar with a use case of cursor layer of Destop. For In-Vehicle
Infortainment system, it is extended to all applications. For example,
rearview camera application is assigned to a layer to group several
surfaces, e.g. captured image and drawing lines separately. Central
manaegr can control property of the layer of rearview camera.
This reference show examples to implement the central component as a
module of weston.
Default Scene graph of UI is defined in hmi_controller_create. It
consists of
- In the bottom, a base layer to group surfaces of background, panel,
and buttons
- Next, a application layer to show application surfaces.
- Workspace background layer to show a surface of background image.
- Workspace layer to show launcher to launch application with icons.
Paths to binary and icon are defined in weston.ini. The width of
this layer is longer than the size of screen because a workspace
has several pages and is controlled by motion of input.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- ivi-shell.so
- introduces ivi-shell/ivi-shell.[ch]
In-Vehicle Infotainment system traditionally manages surfaces with
global identification. A protocol, ivi_application, supports such a
feature by implementing a request, ivi_application::surface_creation
defined in ivi_application.xml.
The ivi-shell explicitly loads ivi-layout.so and a module to add
business logic like how to layout surfaces by using ivi-layout APIs.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- ivi-layout.so
- introduces ivi-layout-export.h, ivi-layout.[ch]
API set of controlling properties of surface and layer which groups
surfaces. An unique ID whose type is integer is required to create
surface and layer. With the unique ID, surface and layer are identified
to control them. The API set consists of APIs to control properties of
surface and layers about followings,
- visibility.
- opacity.
- clipping (x,y,width,height).
- position and size of it to be displayed.
- orientation per 90 degree.
- add or remove surfaces to a layer.
- order of surfaces/layers in layer/screen to be displayed.
- commit to apply property changes.
- notifications of property change.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Nobuhiko Tanibata
Pekka Paalanen
Bryce Harrington
Carlos Olmedo Escobar
Ondřej Majerech