With the addition of patch 433f4e77b7 we display the same view id (0)
for every view as we're modifying the local variable.
Displaying sub-surfaces based views is also problematic. The caller need
to modify the view number as well, so we instead we pass the address as
to allow that to happen. Otherwise we end up repeating the same number
for views without sub-subrfaces once those have been printed.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Weston 6.0.0 was released with both autotools and Meson build systems. That
should be enough for downstream to migrate to Meson build on their on pace.
Maintaining two build systems is a hassle, keep the one that is easier to work
with and let the other one go.
doc/dozygen/tool*.doxygen.in are not deleted, because they have not been
integrated with Meson yet.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Copy the damage region to scanout drm_plane_state which will be sent to
kernel during atomic state update.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
The plane property FB_DAMAGE_CLIPS provides a way to mark damaged
regions on the plane in framebuffer coordinates of the framebuffer
attached to the plane.
This patch adds a new member "damage" to compositor version of
drm_plane_state and set FB_DAMAGE_CLIPS property whenever damage is
available.
v2: Rebase, check if plane support FB_DAMAGE_CLIPS property before
setting it.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
All the GBM code is unconditional in compositor-drm.c, so while disabling the
GL-renderer would stop GBM from being used, GBM headers would still be needed
for building and GBM library for linking.
Leave a note to fix it properly later. At least we now check for GBM and do not
mislead with the error message.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Since commit ee1d968e64 ("compositor-drm: Fall back if GBM surface fails with
modifiers"), drm_output_init_egl requires output->gbm_surface to be NULL, or
gbm_surface_create will not be called if HAVE_GBM_MODIFIERS is enabled but no
modifiers are supported by the plane. This could happen if _init_egl is called
after drm_ouptut_fini_egl drom drm_output_switch_mode.
Add an assert to guarantee the requirement and clears the gbm_surface pointer
after the surface is destroyed.
Signed-off-by: Philipp Zabel <p.pzabel@pengutronix.de>
../libweston/compositor-rdp.c: In function ‘rdp_peer_refresh_rfx’:
../libweston/compositor-rdp.c:213:25: error: invalid type argument of unary ‘*’ (have ‘SURFACE_BITS_COMMAND’ {aka ‘struct _SURFACE_BITS_COMMAND’})
memset(&cmd, 0, sizeof(*cmd));
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
If we cannot create a gbm_surface using a list of modifiers, fall back
to using the old pre-modifier version.
This fixes initialisation on systems where KMS supports modifiers but
the GBM driver does not, such as old i915 systems like Pine View using
the unified KMS driver but the old i915 Mesa driver.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If the 'renderer-gl' option is enabled, ENABLE_EGL is defined, and
libweston/pixel-formats.c includes EGL/egl.h. This requires an egl
dependency, as X11-less platforms need the MESA_EGL_NO_X11_HEADERS
define from egl.pc cflags:
In file included from /usr/include/EGL/egl.h:39:0,
from ../libweston/pixel-formats.c:42:
/usr/include/EGL/eglplatform.h:124:10: fatal error: X11/Xlib.h: No such file or directory
compilation terminated.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Better to excercise the current rather than outdated protocol.
Pekka:
- split the patch, rewrote commit message
- rename xdg_shell_ping to xdg_wm_base_ping
- rename xdg_shell_listener to wm_base_listener
- fix continued line alignment
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Make it official that libweston will export the weston_config API, as requested
in https://gitlab.freedesktop.org/wayland/weston/merge_requests/29 .
There is no other way third party helper clients could access the API.
The autotools build has been accidentally exporting it all the time, but the
Meson build needed fixing.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Implement the get_release request of the zwp_surface_synchronization_v1
interface.
This commit implements the zwp_buffer_release_v1 interface. It supports
the zwp_buffer_release_v1.fenced_release event for surfaces rendered by
the GL renderer, and the zwp_buffer_release_v1.immediate_release event
for other cases.
Note that the immediate_release event is safe to be used for surface
buffers used as planes in the DRM backend, since the backend releases
them only after the next page flip that doesn't use the buffers has
finished.
Changes in v7:
- Remove "partial" from commit title and description.
- Fix inverted check when clearing used_in_output_repaint flag.
Changes in v5:
- Use the new, generic explicit sync server error reporting function.
- Introduce and use weston_buffer_release_move.
- Introduce internally and use weston_buffer_release_destroy.
Changes in v4:
- Support the zwp_buffer_release_v1.fenced_release event.
- Support release fences in the GL renderer.
- Assert that pending state buffer_release is always NULL after a
commit.
- Simplify weston_buffer_release_reference.
- Move removal of destroy listener before resource destruction to
avoid concerns about use-after-free in
weston_buffer_release_reference
- Rename weston_buffer_release_reference.busy_count to ref_count.
- Add documentation for weston_buffer_release and ..._reference.
Changes in v3:
- Raise NO_BUFFER for get_release if no buffer has been committed,
don't raise UNSUPPORTED_BUFFER for non-dmabuf buffers,
so get_release works for all valid buffers.
- Destroy the buffer_release object after sending an event.
- Track lifetime of buffer_release objects per commit, independently
of any buffers.
- Use updated protocol interface names.
- Use correct format specifier for resource ids.
Changes in v2:
- Raise UNSUPPORTED_BUFFER at commit if client has requested a
buffer_release, but the committed buffer is not a valid linux_dmabuf.
- Remove tests that are not viable anymore due to our inability to
create dmabuf buffers and fences in a unit-test environment.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Implement the set_acquire_fence request of the
zwp_surface_synchronization_v1 interface.
The implementation uses the acquire fence in two ways:
1. If the associated buffer is used as GL render source, an
EGLSyncKHR is created from the fence and used to synchronize
access.
2. If the associated buffer is used as a plane framebuffer,
the acquire fence is treated as an in-fence for the atomic
commit operation. If in-fences are not supported and the buffer
has an acquire fence, we don't consider it for plane placement.
If the used compositor/renderer doesn't support explicit
synchronization, we don't advertise the protocol at all. Currently only
the DRM and X11 backends when using the GL renderer advertise the
protocol for production use.
Issues for discussion
---------------------
a. Currently, a server-side wait of EGLSyncKHR is performed before
using the EGLImage/texture during rendering. Unfortunately, it's not clear
from the specs whether this is generally safe to do, or we need to
sync before glEGLImageTargetTexture2DOES. The exception is
TEXTURE_EXTERNAL_OES where the spec mentions it's enough to sync
and then glBindTexture for any changes to take effect.
Changes in v5:
- Meson support.
- Make explicit sync server error reporting more generic, supporting
all explicit sync related interfaces not just
wp_linux_surface_synchronization.
- Fix typo in warning for missing EGL_KHR_wait_sync extension.
- Support minor version 2 of the explicit sync protocol (i.e., support
fences for opaque EGL buffers).
Changes in v4:
- Introduce and use fd_clear and and fd_move helpers.
- Don't check for a valid buffer when updating surface acquire fence fd
from state.
- Assert that pending state acquire fence fd is always clear
after a commit.
- Clarify that WESTON_CAP_EXPLICIT_SYNC applies to just the
renderer.
- Check for EGL_KHR_wait_sync before using eglWaitSyncKHR.
- Dup the acquire fence before passing to EGL.
Changes in v3:
- Keep acquire_fence_fd in surface instead of buffer.
- Clarify that WESTON_CAP_EXPLICIT_SYNC applies to both backend and
renderer.
- Move comment about non-ownership of in_fence_fd to struct
drm_plane_state definition.
- Assert that we don't try to use planes with in-fences when using the
legacy KMS API.
- Remove unnecessary info from wayland error messages.
- Handle acquire fence for subsurface commits.
- Guard against self-update in fd_update.
- Disconnect the client if acquire fence EGLSyncKHR creation or wait
fails.
- Use updated protocol interface names.
- User correct format specifier for resource ids.
- Advertise protocol for X11 backend with GL renderer.
Changes in v2:
- Remove sync file wait fallbacks.
- Raise UNSUPPORTED_BUFFER error at commit if we have an acquire
fence, but the committed buffer is not a valid linux_dmabuf.
- Don't put buffers with in-fences on planes that don't support
in-fences.
- Don't advertise explicit sync protocol if backend does not
support explicit sync.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Introduce an internal API for dealing with linux sync files,
and use it in the codebase to replace ad-hoc sync file management.
The linux_sync_file_is_valid function is not currently used, but will be
utilized in upcoming commits to implement the
zwp_linux_explicit_synchronization_unstable_v1 protocol.
Changes in v5:
- Meson support.
Changes in v3:
- Use parameter name in function documentation.
- Move kernel UAPI to separate header file.
Changes in v2:
- Add function documentation
- Remove linux_sync_file_wait()
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Introduce support for the zwp_linux_explicit_synchronization_unstable_v1
protocol with an implementation of the zwp_linux_explicit_synchronization_v1
interface.
Explicit synchronization provides a more versatile notification
mechanism for buffer readiness and availability, and can be used to
improve efficiency by integrating with related functionality in display
and graphics APIs.
In addition, the per-commit nature of the release events provided by
this protocol potentially offers a solution to a deficiency of the
wl_buffer.release event (see
https://gitlab.freedesktop.org/wayland/wayland/issues/46).
Support for this protocol depends on the capabilities of the backend, so
we don't register it by default but provide a function which each
backend will need to call. In this commit only the headless backend when
using the noop renderer supports this to enable testing.
Note that the zwp_surface_synchronization_v1 interface, which contains
the core functionality of the protocol, is not implemented in this
commit. Support for it will be added in future commits.
Changes in v7:
- Added some information in the commit message about the benefits of
the explicit sync protocol.
Changes in v6:
- Fall back to advertising minor version 1 of the explicit sync protocol,
although we support minor version 2 features, until the new
wayland-protocols version is released.
Changes in v5:
- Meson support.
- Advertise minor version 2 of the explicit sync protocol.
Changes in v4:
- Enable explicit sync support in the headless backend for all
renderers.
Changes in v3:
- Use wl_resource_get_version() instead of hardcoding version 1.
- Use updated protocol interface names.
- Use correct format specifier for resource id.
- Change test name to 'linux-explicit-synchronization.weston'
(s/_/-/g).
Changes in v2:
- Move implementation to separate file so protocol can be registered
on demand by backends.
- Register protocol in headless+noop backend for testing purposes.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Since the Meson install step is not written to try to set the suid bit
automatically, remind the user that weston-launch needs to be
setuid-root to work.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
This attempts to wake up secondary framebuffer devices
(/dev/fb1 and up) as usually these devices start powered off, and
the FBIOPUT_VSCREENINFO ioctl turns it on. This was tested on qemu
with two virtual QXL cards. This is a more precise way to activate
framebuffer devices with the ioctl
This will cause gbm_surface_create_with_modifiers to fail on drivers
where modifiers are not yet supported (e.g. amdgpu). We need to make
sure we only end up using gbm_surface_create in this case.
This fixes the remoting plugin on these drivers.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
In patch 5d767416c1 we simplified a bit the way in which the
compositing mode was being printed with the purpose to improve
weston-debug. It seems we forgot to use the mode when RENDER-only mode
is being used, so this patch fixes that.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
Add missing drm_plane_state_put_back in case the view's pixel format
does not match any of the tested plane's supported formats.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Helps people avoid wayland-egl if they don't want it.
Makes the check for wayland-egl explicit on the site instead of relying
on gl-renderer checking for it.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Helps people to avoid EGL and GLESv2 if they do not want them.
Stops using dep_egl and dep_glesv2 so that the human friendly error
message is alongside the dependency() statement, so that the message and
the statement can later be merged together once Meson offers the custom
error messages feature or something even more sophisticated.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Make fbdev work with some Android downstream kernels, like the
asus-grouper (Google Nexus 7 2012).
Signed-off-by: Oliver Smith <ollieparanoid@bitmessage.ch>
The 'done' event sent back to client with the weston screenshot interface
is not being sent if there is no damage on the plane. This patch (re-uses just
like recording part) weston_output_damage() to achieve that.
Otherwise the client will have to wait (and be blocked) until some
damage on the plane is being done.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
This fixes the situation when using only plane-state mode for
compositing there's no obvious debug message stating that. This patch
makes it slightly better/easier to dermine what mode the compositor is
using currently.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
This fixes warnings like ``may be used uninitialized''
libweston/compositor-drm.c: In function 'drm_device_is_kms':
libweston/compositor-drm.c:6374:12: warning: 'id' may be used uninitialized in this function [-Wmaybe-uninitialized]
b->drm.id = id;
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
Meson is a build system, currently implemented in Python, with multiple
output backends, including Ninja and Make. The build file syntax is
clean and easy to read unlike autotools. In practise, configuring and
building with Meson and Ninja has been observed to be much faster than
with autotools. Also cross-building support is excellent.
More information at http://mesonbuild.com
Since moving to Meson requires some changes from users in any case, we
took this opportunity to revamp build options. Most of the build options
still exist, some have changed names or more, and a few have been
dropped. The option to choose the Cairo flavour is not implemented since
for the longest time the Cairo image backend has been the only
recommended one.
This Meson build should be fully functional and it installs everything
an all-enabled autotools build does. Installed pkg-config files have
some minor differences that should be insignificant. Building of some
developer documentation that was never installed with autotools is
missing.
It is expected that the autotools build system will be removed soon
after the next Weston release.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Pekka Paalanen
Marius Vlad
Deepak Rawat
Philipp Zabel
Philipp Zabel
Daniel Stone
Emmanuel Gil Peyrot
ant8me
Alexandros Frantzis
Pekka Paalanen
Scott Anderson
n3rdopolis
Thomas Zimmermann
Marius Vlad
Pablo Castellano