ret is overwritten by drmModeAddFB2 call
(Found by clang source code analyzer)
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
"has_discrete" gets set to true in if/else if, but gets left unset otherwise.
So let's initialize it to false.
(This was caught by valgrind.)
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This is already done when weston_output_init_geometry() is called.
Actually this is a fix for 8564a0d, because without this patch, the
compositor sometimes crashes when setting output transform
Signed-off-by: Ilia Bozhinov <ammen99@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The timestamp could be either NULL if there's no mode set, or 0 when output gets
awaken. It either crashes weston or we get vblanks at [0, 0] for that output.
Signed-off-by: Marius Vlad <marius-cristian.vlad@nxp.com>
CC: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
[Pekka: note, most start_repaint_loop pass in current time, not 0]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Due to race conditions, it is (vanishingly unlikely but) possible to
receive a wl_pointer.enter event referring to a wl_surface we have just
destroyed. If this happens, wl_surface will be NULL. Detect this, clear
out our focus, and return.
Other pointer and keyboard events are robust against destroyed surfaces.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
[Pekka: remove call to input_set_cursor()]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Do not attempt to set keyboard focus to a surface that has no
wl_resource. The destroy listener hangs off the wl_resource, so if that
is not present, nothing will clean up the pointer when the
weston_surface gets destroyed and it goes stale.
As keyboard_focus_resource_destroyed() sets the focus to NULL, this
patch should be enough to guarantee that the keyboard focus surface will
always have a wl_resource.
I have confirmed the added branch in weston_keyboard_set_focus() can be
hit, but doing so is hard.
My test case has weston/x11 with two outputs, and weston/wayland
--sprawl running on top of that, then closing the parent compositor
output windows one by one. Sometimes it hits, often it does not. Having
the window closing animation enabled may help to hit it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Destroying an output (wl_surface) can race against the parent compositor
sending wl_keyboard.enter. When this race is lost, wayland-backend
receives wl_keyboard.enter with a NULL wl_surface for the surface it
just destroyed.
Handle this case by ignoring such enter events. Since it is
theoretically possible to follow enter with key events, drop those too.
The modifiers event is sent before enter, so we cannot drop that on the
same condition.
wl_keyboard.leave handler seems to already handle the NULL focus case,
but there is a question if the notify_keyboard_focus_out() call should
be avoided.
This patch fixes a hard to reproduce crash. I was running weston/x11
with two outputs, and weston/wayland --sprawl inside that, then closing
the parent compositor windows one by one. Sometimes it would trigger
this crash.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
EGL_IMG_context_priority allows the client to request that their
rendering be considered high priority. For ourselves, this is important
as we are interactive and any delay in our rendering causes input-output
jitter; a less than smooth user interactive. So if the driver supports
setting the context priority, try and create our EGLContext as high
priority. The driver may reject our request due to system restrictions,
in which case it will fallback to normal priority, but if successful it
will reschedule our rendering and all of its dependencies to execute
earlier, especially important when the GPU is being hogged by background
clients.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If AddFB2 ever fails for any reason, we fall back to legacy AddFB, which
doesn't support the same swathe of formats, or multi-planar formats, or
modifiers.
This can happen with arbitrary client buffers, condemning us to the
fallback forever more. Remove this, at the cost of an unnecessary ioctl
for users on old kernels without AddFB2; unfortunately, we cannot detect
the complete absence of the ioctl, as the return here is -EINVAL rather
than -ENOTTY.
A check for whether or not the format is valid has been replaced with an
assert, as its callers either check that the format is non-zero, return
a FourCC format code from GBM, or use a static FourCC format.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Make it a bit more clear what the purpose of the variable is.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Nothing in this loop reorders views within the compositor's view_list.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The direction of scrolling in the RDP compositor appears to be inverted.
When using Weston directly in X, sending X11 button 4 cuases window
contents to scroll up and button 4 to be reported to xwayland clients.
Conversely, when using Weston through RDP (xfreerdp client), sending
X11 button 4 causes window contents to scroll down and button 5 to be
reported to xwayland clients. The xfreerdp client does not seem to be
the cause of this since scrolling works correctly when connecting to
a Windows host.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: David Fort <contact@hardening-consulting.com>
Implement the zwp_input_timestamps_manager_v1.get_touch_timestamps
request to subscribe to timestamp events for wl_touch resources. Ensure
that the request handling code can gracefully handle inert touch
resources.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Implement the zwp_input_timestamps_manager_v1.get_pointer_timestamps
request to subscribe to timestamp events for wl_pointer resources.
Ensure that the request handling code can gracefully handle inert
pointer resources.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Implement the zwp_input_timestamps_manager_v1.get_keyboard_timestamps
request to subscribe to timestamp events for wl_keyboard resources.
Ensure that the request handling code can gracefully handle inert
keyboard resources.
This commit introduces a few internal helper functions which will also
be useful in the implementation of the remaining
zwp_input_timestamps_manager_v1 requests.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Introduce code to support the implementation of the
input_timestamps_unstable_v1 protocol in libweston. This commit does not
implement the actual timestamp subscriptions, but sets up the
zwp_input_timestamps_manager_v1 object and introduces dummy request
handling functions for it, laying the foundation for timestamp
subscriptions for keyboard/pointer/touch to be added cleanly in upcoming
commits.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
... to get the user_data. Like everywhere else through weston.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Ensure the server can safely handle client requests for wl_seat resource
that have become inert due to weston_seat object release and subsequent
destruction.
The clean-up involves, among other things, unsetting the destroyed
weston_seat object from the user data of wl_seat resources, and handling
this NULL user data case where required.
The list of sites extracting and using weston_seat object from wl_seat
resources which were audited for this patch are:
Legend:
N/A = Not Applicable (not implemented by weston)
FIXED = Fixed in the commit
OK = Already works correctly
== keyboard_shortcuts_inhibit_unstable_v1 ==
[N/A] zwp_keyboard_shortcuts_inhibit_manager_v1.inhibit_shortcuts
== tablet_input_unstable_v{1,2} ==
[N/A] zwp_tablet_manager_v{1,2}.get_tablet_seat
== text_input_unstable_v1 ==
[FIXED] zwp_text_input_v1.activate
[FIXED] zwp_text_input_v1.deactivate
== wl_data_device ==
[FIXED] wl_data_device_manager.get_data_device
[OK] wl_data_device.start_drag
[FIXED] wl_data_device.set_selection
[OK] wl_data_device.release
== wl_shell ==
[FIXED] wl_shell_surface.move
[FIXED] wl_shell_surface.resize
[FIXED] wl_shell_surface.set_popup
== xdg_shell and xdg_shell_unstable_v6 ==
[FIXED] xdg_toplevel.show_window_menu
[FIXED] xdg_toplevel.move
[FIXED] xdg_toplevel.resize
[FIXED] xdg_popup.grab
== xdg_shell_unstable_v5 ==
[FIXED] xdg_shell.get_xdg_popup
[FIXED] xdg_surface.show_window_menu
[FIXED] xdg_surface.move
[FIXED] xdg_surface.resize
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Properly clean up all sub-objects (e.g., weston_pointer_client objects)
when a weston_pointer object is destroyed. The clean-up ensures that the
server is able to safely handle client requests to any associated
pointer resources, which, as a consenquence of a weston_pointer
destruction, have now become inert.
The clean-up involves, among other things, unsetting the destroyed
weston_pointer object from the user data of pointer resources, and
handling this NULL user data case where required. Note that in many
sites affected by this change the existing code already properly handles
NULL weston_pointer (e.g. in init_pointer_constraint), so there is no
need for additional updates there.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Fix init_pointer_constraint so that it creates a valid, but inert,
resource if a NULL weston_pointer value is passed in. In that case no
constraint object is associated with the resource, but this is not an
issue since affected code can already handle NULL constraint objects.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Leaks spotted by Valgrind.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Spotted by Valgrind.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Fixes the following Valgrind error:
==21607== Syscall param ioctl(generic) points to uninitialised byte(s)
==21607== at 0x5E8C787: ioctl (in /lib64/libc-2.25.so)
==21607== by 0x8220C17: drmIoctl (in /usr/lib64/libdrm.so.2.4.0)
==21607== by 0x82263CD: drmModeSetCrtc (in /usr/lib64/libdrm.so.2.4.0)
==21607== by 0x7B22095: drm_output_apply_state_legacy (compositor-drm.c:2107)
==21607== by 0x7B2335D: drm_pending_state_apply (compositor-drm.c:2539)
==21607== by 0x7B23AEB: drm_repaint_flush (compositor-drm.c:2773)
==21607== by 0x4E4A3E4: output_repaint_timer_handler (compositor.c:2500)
==21607== by 0x5081496: wl_event_source_timer_dispatch (event-loop.c:235)
==21607== by 0x5081B61: wl_event_loop_dispatch (event-loop.c:633)
==21607== by 0x50803A4: wl_display_run (wayland-server.c:1245)
==21607== by 0x409DD8: main (main.c:2644)
==21607== Address 0xffefff59a is on thread 1's stack
==21607== in frame #2, created by drmModeSetCrtc (???:)
==21607== Uninitialised value was created by a stack allocation
==21607== at 0x7B2782F: drm_output_choose_initial_mode (compositor-drm.c:4842)
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
[Pekka: switch to memset]
Reviewed-by: Daniel Stone <daniels@collabora.com>
Move it into to a new function. Following patches want to compute it
elsewhere as well.
No functional changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This function needs to reset the structures to NULL, otherwise it is not
possible to re-use a once "freed" property info array.
Being able to re-use an array is useful when the memory allocation and
array lifetimes do not match. A specific example is drm_output that is
changed to allocate the CRTC on enable() and deallocate it on disable().
A drm_output might be enabled and disabled multiple times.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
I need to destroy the list from more places, so factor out the common
bits. No functional changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Factor out drm_output_init_crtc() and drm_output_fini_crtc(), so that
the call sites can later be moved easily.
On fini, reset scanout_plane and cursor_plane to NULL, so that in the
future when the drm_output is not longer destroyed immediately after, we
free the planes for other use.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
[Pekka: set crtc_id/pipe at top, reset both on error]
Reviewed-by: Daniel Stone <daniels@collabora.com>
Move this bit of code into its own function. The caller of this already
cluttered and origcrtc is not used for anything else.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Let drm_output_enable() remove the CRTC and the connector from the
unused id arrays.
In the future when a list of drm_heads supersedes unused_connectors
array, the usedness of a connector will be determined by the enabled
state of the output the connector (head) is attached to. The enabled
state is turned on by drm_output_enable(). If unused_crtcs array was
still updated in drm_output_repaint(), the CRTC and connector usedness
would be tracked in different places. Logically the two belong together.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Since formats is an out parameter, we need to copy to the alloc'ed
memory and not over the pointer address.
Signed-off-by: Philipp Kerling <pkerling@casix.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Setting state_invalid to true is moved together with the code adding new
unused CRTCs and connectors in drm_output_deinit(). Logically these two
operations belong together: state_invalid is required for the new unused
item to be turned off.
This does not hinder initial turning off of outputs, because on
compositor start-up, state_invalid is initialized to true, making calls
to drm_output_disable() for non-enabled outputs a no-op.
Previous changes already ensure that if a compositor does not explicitly
enable an output, the CRTC and connector will be turned off even without
an explicit disable (provided there is a at least one enabled output).
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Rather than smashing the state to disable a CRTC immediately, just
delegate that to the normal repaint cycle by setting state_invalid =
true. drm_pending_state_apply() will pick up the unused_crtcs.
A caveat here is that we have no enabled outputs at all, we will never
enter repaint, and so CRTCs do not actually get turned off until we get
at least one output to drive.
However, this should help the problem reported here:
https://lists.freedesktop.org/archives/wayland-devel/2018-January/036713.html
Arguably it is better to leave an output spuriously on in rare cases
rather than fail modeset completely in somewhat more common cases.
My personal motivation for this change is that it helps if we later move
CRTC allocation to output enable/deinit instead of create/destroy,
because then the CRTC will not be available here for initial turn-off as
the output has not been enabled to begin with.
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This was used from the crash handlers, which do not exist anymore.
Nothing calls restore, so delete the dead code.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Instead of assuming the file prefix contains the path and filename
prefix, give these two items separately.
A NULL or empty string path may still be given to refer to the current
directory.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Replace every use of DATADIR to create a filename with a call to the new
function that allows overriding DATADIR with an env var at runtime.
No attention is paid to asprintf failure.
This restores make distcheck to a passing state after commit 6b58ea
began checking cairo surfaces for validity and exchanged undefined
behaviour we shouldn't have been dependent on for consistent test failure.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
[Pekka: split if-branches into two lines]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add support for using the atomic-modesetting API to apply output state.
Unlike previous series, this commit does not unflip sprites_are_broken,
until further work has been done with assign_planes to make it reliable.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Co-authored-by: Louis-Francis Ratté-Boulianne <louis-francis.ratte-boulianne@collabora.com>
Co-authored-by: Derek Foreman <derek.foreman@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
For atomic modesetting support, the mode is identified by a blob
property ID, rather than being passed inline. Add a blob_id member to
drm_mode to handle this, including refactoring mode destruction into a
helper function.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Set the atomic client cap, where it exists, and use this to discover the
plane/CRTC/connector properties we require for atomic modesetting.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When leaving Weston, don't attempt to restore the previous CRTC
settings. The framebuffer may well have disappeared, and in every
likelihood, whoever gets the KMS device afterwards will be repainting
anyway.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Rather than a smattering of error handlers, use consistent jump labels
for error paths in create_output_for_connector().
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Rather than open-coding it ourselves, use the new apply_state helper in
drm_output_start_repaint.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Fabien DESSENNE <fabien.dessenne@st.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Split repaint into two stages, as implied by the grouped-repaint
interface: drm_output_repaint generates the repaint state only, and
drm_repaint_flush applies it.
This also moves DPMS into output state. Previously, the usual way to
DPMS off was that repaint would be called and apply its state, followed
by set_dpms being called afterwards to push the DPMS state separately.
As this happens before the repaint_flush hook, with no change to DPMS we
would set DPMS off, then immediately re-enable the output by posting the
repaint. Not ideal.
Moving DPMS application at the same time complicates this patch, but I
couldn't find a way to split it; if we keep set_dpms before begin_flush
then we break DPMS off, or if we try to move DPMS to output state before
using the repaint flush, we get stuck as the repaint hook generates an
asynchronous state update, followed immediately by set_dpms generating a
synchronous state update.
In drm_output_update_complete, the *_pending flags are cleared
before any of the pending actions are taken; this ensures that the
actions cannot recurse.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If we have an unused CRTC or connector, explicitly disable it during the
end of the repaint cycle, or when we get VT-switched back in.
This commit moves state_invalid from an output property to a backend
property, as the unused CRTCs or connectors are likely not tracked by
drm_outputs. This matches the mechanics of later commits, where we move
to a global repaint-flush hook, applying the state for all outputs in
one go.
The output state_invalid flag originally provoked full changes on output
creation (via setting the flag at output enable time) and session enter.
For the new-output case, we will not have any FB in output->state_cur,
so we still take the same path in repaint as if state_invalid were set.
At session enter, we preserve the existing behaviour: as
start_repaint_loop will fail when state_invalid is set, all outputs will
be scheduled for repaint together, and state_invalid will not be cleared
until after all outputs have been repainted, inside repaint_flush.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Rather than a more piecemeal approach at backend creation, explicitly
track connectors and CRTCs we do not intend to use, so we can ensure
they are disabled where appropriate.
When we have an updated list of connector and CRTC IDs, we add any which
are not owned by an enabled drm_output to the list. We remove them from
the list when drm_output_repaint() is called for that output, and re-add
them when the output is disabled or destroyed.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Ensure the server can safely handle client requests for wl_touch
resources that have become inert due to a weston_touch object
destruction.
This change involves, among other things, setting the weston_touch
object, instead of the weston_seat object, as the user data for wl_touch
resources. Although this is not strictly required at the moment (since
no code is using the wl_touch user data), it makes the code safer:
* It makes more sense conceptually.
* It is consistent with how wl_pointer resources are handled.
* It allows us to clear the user data during weston_touch
destruction, so other code can check whether the resource is
inert.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Ensure the server can safely handle client requests for wl_keyboard
resources that have become inert due to a weston_keyboard object
destruction.
This change involves, among other things, setting the weston_keyboard
object, instead of the weston_seat object, as the user data for
wl_keyboard resources. Although this is not strictly required at the
moment (since no code is using the wl_keyboard user data), it makes the
code safer:
* It makes more sense conceptually.
* It is consistent with how wl_pointer resources are handled.
* It allows us to clear the user data during weston_keyboard
destruction, so other code can check whether the resource is inert.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This fetches the _NET_WM_ICON property of the X11 window, and use the
first image found as the frame icon.
This has been tested with various X11 programs, and improves usability
and user-friendliness a bit.
Changes since v1:
- Changed frame_button_create() to use
frame_button_create_from_surface() internally.
- Removed a check that should never have been commited.
Changes since v2:
- Request UINT32_MAX items instead of 2048, to avoid cutting valid
icons.
- Strengthen checks against malformed input.
- Handle XCB_PROPERTY_DELETE to remove the icon.
- Schedule a repaint if the icon changed.
Changes since v3:
- Keep the previous Cairo surface until the new one has been
successfully loaded.
- Use uint32_t for cardinals. Unsigned is the same type except on
16-bit machines, but uint32_t is clearer.
- Declare length as uint32_t too, like in xcb_get_property_reply_t.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Much like we already have to_drm_output and to_drm_backend.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Up to now we could set the transform only on output initialization.
However, on certain situations(like tablets and convertible laptops),
screen orientation can change while the compositor is running and thus
the need for change of the output transform arises.
When the transform changes, we must update the output geometry,
output->region and output->previous_damage, as well as send this change
to clients. We also have to check whether any of the pointers are inside
the output which is being rotated. If this is the case, they are moved
to the new center, because otherwise the pointer is stuck outside of the
screen ans "lost" to the user.
What is more, after calling this function compositors should check if
any view is now outside of the screen and move it according to their
wish.
Signed-off-by: Ilia Bozhinov <iliyabo@hotmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Emre Ucan
Dima Ryazanov
Ilia Bozhinov
Marius Vlad
Daniel Stone
Pekka Paalanen
Chris Wilson
Jason Gerecke
Greg V
Alexandros Frantzis
Emil Velikov
Philipp Kerling
Aleksander Morgado
Derek Foreman
Emmanuel Gil Peyrot
Ilia Bozhinov