It's been unused since the legacy (non-libinput) input backends have
been removed.
Signed-off-by: Arnaud Vrac <rawoul@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
When the wheel tilt source is present, gcc complains that we don't
handle all possible enumeration values. We already ensure this cannot
happen in its only caller (handle_pointer_axis), but gcc doesn't
recognise this. Give it a default value to quiet the warning.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Provide timestamps with microsecond granularity if the backend can
provide it. Backends that can't should set it to 0.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This clarifies what is supposed to be the libweston code.
v2: screen-share.c is already in compositor/ instead.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Benoit Gschwind <gschwind@gnu-log.net>
Acked-by: Benoit Gschwind <gschwind@gnu-log.net>
[Pekka: rebased]
Instead add callbacks to the drm and fbdev backends and pass that to
the input backens so that when a new device needs to be configured
that is called and the compositor can configure it.
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The config can now be retrieved with a new function defined in weston.h,
wet_get_config(weston_compositor*).
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
This patch is a further step in the wl_fixed_t internal sanitization.
It changes the notify_* functions to take doubles instead of wl_fixed_t
but does not change how these are stored in the various input structs
yet, except for weston_pointer_axis_event.
However this already allows to remove all wl_fixed_t usage in places
like the libinput or the x11 backend.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When we handle keyboard key events, we already retrieve the key state
at the top of this function, so there is no real need to call the same
libinput function again as we can just reuse the 'key_state' variable
that we have above.
Signed-off-by: Chris Michael <cpmichael@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When we handle pointer button events, we already retrieve the button
state at the top of this function, so there is no real need to call
the same function again as we can just reuse the 'button_state'
variable that we have above.
Signed-off-by: Chris Michael <cpmichael@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
[jonas: only send focus wl_pointer.frame if resource supports it]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Use an event struct to pass axis events around. This helps dealing with the
upcoming axis discrete changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Instead of only passing absolute pointer coordinates, effectively
loosing motion event data, pass a struct that can potentially contain
different types of motion events, currently being absolute and relative.
A helper function to get resulting absolute coordinates was added for
when previous callbacks simply used the (x, y) coordinates.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Removed duplicate definitions of the container_of() macro and
refactored sources to use the single implementation.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Keyboard key events will be received from a device where a key has
been pressed, even though an equivalent key has been pressed (same
key code) on a device connected to the same seat. notify_key()
expects to only be called as if there was only one keyboard device
associated with the given seat, so to achieve this, ignore every event
where forwarding it would result in multiple 'pressed' or 'released'
notifications.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Pointer button events will be received from a device where a button has
been pressed, even though an equivalent button has been pressed (same
button code) on a device connected to the same seat. notify_button()
expects to only be called as if there was only one pointer device
associated with the given seat, so to achieve this, ignore every event
where forwarding it would result in multiple 'pressed' or 'released'
notifications.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
libinput < 0.8 sent wheel click events with value 10. Since 0.8
the value is the angle of the click in degrees but it now provides
the click count as separate value. To keep backwards-compat with
existing clients, we just send multiples of the click count.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
libinput now provides a single event for scroll events. Extract the axes from
that event and split them into the wl events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
While the test is actually correct (for non-negative numbers), it's not
at all clear and seems to be an accidental order of operations mistake.
Also, add an assert() to make sure this number is never negative.
Closes bug 86346 - https://bugs.freedesktop.org/show_bug.cgi?id=86346
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Initial key state is no pressed keys, and the libinput_device_get_keys
function was deprecated in libinput 0.6.0.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
WL_CALIBRATION, introduced in weston-1.1, requires the translation component
of the calibration matrix to be in screen coordinates. libinput does not have
access to this and it's not a very generic way to do this anyway. So with
the libinput backend, WL_CALIBRATION support is currently broken (#82742).
This cannot be fixed in libinput without changing its API for this specific
use-case.
This patch lets weston take care of WL_CALIBRATION. It takes the original
format and normalizes it before passing it to libinput. This way libinput
still does the coordinate transformation, weston just needs to provide the
initial configuration.
Note that this needs an updated libinput, otherwise libinput will try to
transform coordinates as well.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=82742
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Enable by adding the following to your weston.ini:
[libinput]
enable_tap=true
This also makes weston require libinput >= 0.5.0.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Also update configure.ac to require libinput 0.3 when enabled, as it is
the version where double replaced li_fixed_t.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Make sure that we don't map a device to an invalid output pointer and
intead remap devices when an output is created.
v2: fix the error with libinput too.
Commit 17bccaed intended to make the events coming from a touchscreen
paired with an unplugged output to be discarded, while an unpaired one
would just choose a different output. However, the logic was inverted
causing the opposite to happen.
Later in commit 161c6c56, the default behavior was changed to map an
output to a default output if the one specified via udev is not
present. This change is reverted by this patch.
v2: undo the change from commit 161c6c56.
v3: deal with libinput too.
If an input device wants to map to an output that does not
exist, then just map it to the first output.
Also, if a device is mapped to an output that gets unplugged then
it gets default mapped to the first output in the output destroy
listener. However, the original output destroy listener needs to
be removed before adding the new listener for the first output,
otherwise the list gets corrupted.
Later if the other output is plugged back in, we remap the device
to it. In that case, we should remove the destroy listener for
the first output.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=77341
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
We need to break after handling LIBINPUT_EVENT_TOUCH_UP otherwise
we fall into the default case and end up logging that the event
is unknown and then return the wrong "handled" result.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=77577
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
While disable by default, passing --enable-libinput-backend to
./configure switches the input backend in weston's drm, fbdev and rpi
compositing backends to use libinput instead of udev-seat.c, evdev.c and
friends.
When enabled, weston now also depends on libinput >= 0.1.0.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Arnaud Vrac
Daniel Stone
Jussi Kukkonen
Jonas Ådahl
Pekka Paalanen
Giulio Camuffo
Chris Michael
Peter Hutterer
Jon Cruz
Bryce Harrington
Derek Foreman
Ander Conselvan de Oliveira
U. Artie Eoff