glibc 2.25 produces a warning when sysmacros.h is not directly included
but major() is used, as it is intended to be moved to sysmacros.h and
only there. Include it to keep the build happy.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
repaint_scheduled is actually cleverly a quad-state, disguised as a
boolean. There are four possible conditions for the repaint loop to be
in at any time:
- loop idle; no repaint will occur until specifically requested, which
may be never (repaint_scheduled == 0)
- loop schedule to begin: the loop was previously idle, but due to a
repaint-schedule request, we will call the start_repaint_loop hook
in the next idle task
- repaint scheduled: the compositor has definitively scheduled a
repaint request for this output, which will occur in fixed time
- awaiting repaint completion: the backend has not yet signaled
completion of the last repaint request, and the compositor will not
schedule another until it does so
All but the first condition were previously conflated as
repaint_scheduled == 1, but break them out into separate conditions to
aid clarity, backed up by some asserts.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
On startup, we cannot lock on to the repaint timer because it is unknown
to us. We deal with this by claiming that the moment of entry into the
repaint loop is the moment a frame returned, causing finish_frame to
delay our initial repaint to (refresh_time - repaint_delay), typically
around 9ms of utterly wasted time.
Add an explicit stamp == NULL, to determine that we are just beginning
our repaint loop, that the timings are in fact totally invalid, and that
it would be beneficial to repaint the output immediately. This will only
trigger when the display had previously been disabled or the previous
state is unknown, e.g. at startup, or coming back from DPMS off.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Rather than determining the time until next-frame repaint in relative
space (time until repaint), determine it first in absolute space, and
then later convert this to relative.
This will later allow us to store these per-output, so we can have a
single idle timer which will allow us to aggregate multiple repaints
together when timing allows.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Paralleling timespec_to_nsec, converts to milliseconds.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
[Pekka: added doc about flooring]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Weston will not repaint until previous update has been acked by a
pageflip event coming from the drm driver. However, some buggy drivers
won’t return those events or will stop sending them at some point and
Weston output repaints will completely freeze. To ease developers’ task
in testing their drivers, this patch makes compositor-drm use a timer
to detect cases where those pageflip events stop coming.
This timeout implementation is software only and includes basic
features usually found in a watchdog. We simply exit Weston gracefully
with a log message and an exit code when the timout is reached.
The timeout value can be set via weston.ini by adding a
pageflip-timeout=<MILLISECONDS> entry under [core]
section. Setting it to 0 disables the timeout feature.
v2:
- Made sure we would get both the pageflip and the vblank events before
stopping the timer.
- Reordered the error and success cases in
drm_output_pageflip_timer_create() to be more in line with the rest
of the code.
v3:
- Reordered (de)arming of the timer with the code around it to avoid it
being rearmed before the current dearming.
- Return the proper value for the dispatcher in the pageflip_timeout
callback.
- Also display the output name in case the timer fires.
v4:
- Reordered a forgotten timer rearming after its drmModePageFlip().
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=83884
Signed-off-by: Frederic Plourde <frederic.plourde at collabora.co.uk>
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Makes the code easier to read and browse through.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Don't import buffers which span multiple outputs, short-cut any attempt
to import SHM buffers, and ignore buffers with a global alpha set.
I'm not convinced all of these conditions entirely make sense, but this
at least makes them equally nonsensical.
Differential Revision: https://phabricator.freedesktop.org/D1414
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
And properly deconstruct it in drm_output_destroy.
Might be useful for finding out which modes are supported
before even setting them, in case we want to extend the
modesetting API.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Previously in picking CRTC -> encoder -> connecting routing, we went for
the first triplet we found which claimed to work.
Preserving the existing routing means that startup will be faster: on a
multi-head system, changing the routing implies disabling both CRTCs,
then re-enabling them with a new configuration, which may involve
retraining links etc.
Furthermore, the existing routing may be set for a reason; each
CRTC/encoder is not necessarily as capable as the other, so the routing
may be configured to stay within such device limits.
Try where possible to respect the routing we pick up, rather than
blithely configuring our own.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Given that we can have render-only devices, or vgem in a class of its
own, ignore any non-KMS devices in compositor-drm's device selection.
For x86 platforms, this is mostly a non-issue since we look at the udev
boot_vga issue, but other architectures which lack this, and have
multiple KMS devices present, will hit this.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reported-by: Thierry Reding <treding@nvidia.com>
Reported-by: Daniel Vetter <daniel.vetter@intel.com>
A handful of source files were not using the MIT Expat text in
COPYING. Update these files to bring them inline with the rest,
standardizing on the MIT Expat text.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Remove the last usage of connector_allocator, which was to check for
displays which have been hot-unplugged, and replace it with an array
which doesn't rely on the connector IDs remaining below 32 (or 64).
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reported-by: Peter Senna Tschudin <peter.senna@collabora.com>
Rather than using connector_allocator to determine whether an output is
newly connected or not, use a list walk across all outputs instead.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reported-by: Peter Senna Tschudin <peter.senna@collabora.com>
crtc_allocator was used as a bitmask of CRTC IDs, so we didn't try to
use the same CRTC for multiple outputs. Unfortunately, this only works
to the extent that CRTC object IDs fit within the bitmask; though they
were previously, they are not guaranteed to be under 32 or even 64.
Replace the only use of crtc_allocator with a list walk across outputs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reported-by: Peter Senna Tschudin <peter.senna@collabora.com>
When a client changes the subsurfaces state, we need to damage
them so the result is visible. We do that by flagging the surfaces
when the state changes and causing damage when committing the
state. This prevents normal repaints from considering these changes
until a commit has happened, and allows the client to atomically
schedule several changes.
This fixes the subsurface_z_order test, which is now marked as expected
to succeed.
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Micah Fedke <micah.fedke@collabora.co.uk>
The connector option is a part of drm_backend struct.
Therefore, it is not needed to pass it as an argument
to create_outputs function.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
weston can be started with --connector option to be initialized
with a particular output. But in the update_outputs this option
is not considered and output is created for all the available
connectors. This patch fixes this issue by considering
the option for connectors in the update_outputs.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
This patch checks the attribute flags on incoming dmabufs and refuses to
put them overlays if they have any of the flags set (currently:
ZWP_LINUX_BUFFER_PARAMS_V1_FLAGS_Y_INVERT,
ZWP_LINUX_BUFFER_PARAMS_V1_FLAGS_INTERLACED and
ZWP_LINUX_BUFFER_PARAMS_V1_FLAGS_BOTTOM_FIRST), instead defaulting to
the gl-renderer which can handle some of the flags.
This check should be superceded by buffer transforms, when they become
available.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Given that it's used by clients, it's really the very definition of
shared.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
repaint_needed / repaint_scheduled are surprisingly subtle. Explode the
conditional with side-effects into more obvious separate calls, and
document what they do.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Hi Pekka,
On 23 January 2017 at 14:15, Pekka Paalanen <ppaalanen@gmail.com> wrote:
> On Fri, 20 Jan 2017 11:31:08 +0100
> Emilio Pozuelo Monfort <pochu@debian.org> wrote:
>> This version works for me...
>
> Hi guys,
>
> I found another guest to the party. Using net-misc/freerdp-2.0.0_pre20160722
> Weston master fails to build with:
>
>
> In file included from /usr/include/freerdp2/freerdp/codecs.h:25:0,
> from /usr/include/freerdp2/freerdp/freerdp.h:46,
> from /home/pq/git/weston/libweston/compositor-rdp.c:69:
> /home/pq/git/weston/libweston/compositor-rdp.c: In function ‘rdp_peer_context_new’:
> /usr/include/freerdp2/freerdp/codec/color.h:85:72: error: ‘FREERDP_PIXEL_FORMAT_TYPE_BGRA’ undeclared (first use in this function)
> [... snip ...]
>
> However, updating to net-misc/freerdp-2.0.0_pre20161219 allows things
> to build for me again. There is just one warning:
How about this fixup?
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It got lost during the porting to the config API.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Use different functions so we cannot load a libweston common module in
weston directly or the other way around.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This prevents loading a backend as a simple module. This will avoid
messing up with backends when we will introduce libweston common
modules.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
As an option, allow to specify a mode (from the configuration file) by
its refresh rate.
Example of valid syntax:
- "mode=1920x1080" Select a 1920x1080 mode, refresh rate undefined.
- "mode=1920x1080@60" Select the (or one of the) 1920x1080 60 Hz mode.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Currently, layers’ order depends on the module loading order and it does
not survive runtime modifications (like shell locking/unlocking).
With this patch, modules can safely add their own layer at the expected
position in the stack, with runtime persistence.
v4 Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
[Pekka: fix three whitespace issues]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We had two non-pkg-config check paths in the configure script, to
support XCB functionality used before XCB had had an accompanying
release: xcb_poll_for_queued_event (released in 1.8, 2012), and a
usable XKB event mechanism (released in 1.9, 2013).
Convert the former to a version-based hard dependency, and the latter to
a version-based soft dependency. This avoids two compiler checks.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
When we create a new view, assign it to the primary plane from the
beginning.
Currently, every view across the compositor will be assigned to a plane
during every repaint cycle of every output: the DRM renderer's
assign_planes hook will either move a view to a drm_plane, or to the
primary plane if a suitable drm_plane could not be found for the output
it is on. There are no other assign_planes implementation, and the
fallback when none is provided, is to assign every view to the primary
plane.
DRM's behaviour is undesirable in multi-output situations, since it
means that views which were on a plane on one output will be demoted to
the primary plane; doing this causes damage, which will cause a spurious
repaint for the output. This spurious repaint will have no effect on the
other output, but it will do the same demotion of views to the primary
plane, which will again provoke a repaint on the other output.
With a simple fix for this behaviour (i.e. not moving views which are
only visible on other outputs), the following behaviour is observed:
- outputs A and B are present
- views A and B are created for those outputs respectively, with SHM
buffers attached; view->plane == NULL for both
- current buffer content for views A and B are uploaded to the
renderer
- output A runs its repaint cycle, and sets keep_buffer to false on
surface B's output, as it can never be promoted to a plane; it does
not move view B to another plane
- output B runs its repaint cycle, and moves view B to the primary
plane
- weston_view_assign_to_plane has work to do (as the plane is changing
from NULL to the primary plane), calls weston_surface_damage and
calls weston_surface_damage
- weston_surface_damage re-uploads buffer content, possibly from
nowhere at all; e508ce6a notes that this behaviour is broken
Assigning views to the primary plane when created makes it possible to
fix the DRM assign_planes implementation: assign_planes will always set
keep_buffer to true if there is any chance the buffer can ever be
promoted to a plane, regardless of view configruation. If the buffer
cannot be promoted to a plane, it must by definition never migrate from
the primary plane. This means that there is no opportunity to hit the
same issue, where the buffer content has already been discarded, but
weston_view_assign_to_plane is not a no-op.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Try to harmonise the various plane-import paths a little bit, starting
with reshuffling and commenting the conditions to do so.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Differential Revision: https://phabricator.freedesktop.org/D1413
Forcing DPMS on when we lose our session may force an expensive modeset
operation, which is pointless if the next consumer (another compositor,
or the console) is going to do a modeset. These should force DPMS on
regardless.
This actively causes problems for the DRM backend, in that it may
actually require a repaint to set coherent state for DPMS off -> DPMS on
transitions, which is very much not what we want when going offscreen.
As DRM is the only backend which actually implements DPMS, just remove
this call.
Differential Revision: https://phabricator.freedesktop.org/D1483
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
This always changes the state to ACTIVE when we enter the session,
whereas the previous implementation preserved the state (i.e. if state
was SLEEPING on exit, it would be restored to SLEEPING, but also with a
repaint). This seems more helpful behaviour, however: if you enter a
session, it's probably in order to interact with it.
Differential Revision: https://phabricator.freedesktop.org/D1482
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Even if we do have a framebuffer matching the mode, we immediately
schedule a repaint, meaning we either do work for no reason, or show
stale content before we bring up the new content.
Delete this and just let repaint deal with it.
Differential Revision: https://phabricator.freedesktop.org/D1481
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
This will be used so we can later determine the compatibility of drm_fbs
without needing to introspect external state.
Differential Revision: https://phabricator.freedesktop.org/D1487
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
This makes it sign-compatible with weston_output->{width,height}.
Differential Revision: https://phabricator.freedesktop.org/D1486
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Everyone else uses fb->fd rather than pulling the FD back out of GBM.
Use that in the destroy callback too.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Differential Revision: https://phabricator.freedesktop.org/D1406
No functional change.
Differential Revision: https://phabricator.freedesktop.org/D1484
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
No need to walk the CRTC list every time looking for CRTC indices, when we
already have the CRTC index stashed away. Taking the plane as an argument
also simplifies things a little for callers, and future-proofs for a
potential future KMS API which passes a list of supported CRTC IDs rather
than a bitmask of supported CRTC indices.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Differential Revision: https://phabricator.freedesktop.org/D1407
Clarify the difference between crtc_id (DRM object) and pipe (index into
drmModeRes->crtcs array, possible_crtcs bitmask).
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Differential Revision: https://phabricator.freedesktop.org/D1405
Avoid any buffer overflows here by checking we don't go over PATH_MAX
with stupid module names.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Destroying a wl_cursor will attempt to access the wl_display, which
we have just freed. Avoid a segfault by destroying the cursor images
before we destroy the display.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dima Ryazanov <dima@gmail.com>
Daniel Stone
Emmanuel Gil Peyrot
Emil Velikov
Armin Krezović
Yong Bakos
Giulio Camuffo
Emilio Pozuelo Monfort
Ucan, Emre (ADITG/SW1)
Micah Fedke
Bryce Harrington
Daniel Stone
Emilio Pozuelo Monfort
Quentin Glidic
Fabien Dessenne
Abdur Rehman