Commit "weston-log: add function to avoid direct
access to compositor members in non-core code" added the
function weston_compositor_add_log_scope mainly to allow
libweston users to avoid direct accessing core structs, as
weston_compositor.
Replace weston_log_context_add_log_scope usage by
weston_compositor_add_log_scope.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
There's a function named weston_compositor_log_scope_destroy()
but it doesn't take a struct weston_compositor argument.
Rename it to weston_log_scope_destroy(), as the argument is a
struct weston_log_scope.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
There's a function named weston_compositor_add_log_scope()
but it doesn't take a struct weston_compositor argument.
Rename it to weston_log_ctx_add_log_scope(), as
the log_scope is being added to a log_context.
Also, bump libweston_major to 9.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Remove unnecessary ifdefs for DRM_MODE_CONNECTOR_DSI, DRM_MODE_CONNECTOR_DPI.
They are both provided by libdrm and were introduced long before 2.4.83 (the
lowest version we currently support).
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
This is based on the assumption that overlays are in between cursor and
primary plane and it is required to be able to assign views to planes,
even if the driver doesn't not expose such property.
As we hard-code them as immutable the commit part would not need any
further modifications.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
Functional no change, as nobody makes use of it. Only apply the zpos
value if the zpos property is mutable (that is, zpos_max and zpos_min
are not the same).
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Due to an error in driving GitLab, this commit erroneously contained the
entirety of !267 (zpos support in the KMS backend) squashed into one
single commit, pushed into master.
In order to keep the history clean, this is being reverted; a rebased
version of !267 with the clear individual commits which were already
present will be applied in its place.
This reverts commit 95e3b0deae.
Make GBM optional in case GL renderer is disabled. This allows to
build Weston with DRM backend without Mesa dependencies.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Move DRM virtual support into a separate file. Use the remoting
compile time option to disable DRM virtual support since this is the
only user of DRM virtual support currently. This will make it easier
to build the DRM backend without GBM support.
Signed-off-by: Stefan Agner <stefan@agner.ch>
As 'new_subscription' can create additional objects, 'destroy_subscription'
will be needed when cleaning up.
As this requires a libweston_major bump (noticed by @pq), bump it up to
8.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
In case the base EGLConfig is needed, gl_renderer_display_create() needs to
know it should use EGL_WINDOW_BIT or EGL_PBUFFER_BIT.
The PBUFFER case is added for when the headless backend will grow GL-renderer
support.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
When all shared/ headers are included in the same way, we can drop unnecessary
include seach paths from the compiler.
This include style was chosen because it is prevalent in the code base. Doing
anything different would have been a bigger patch.
This also means that we need to keep the project root directory in the include
search path, which means that one could accidentally include private headers
with
#include "libweston/dbus.h"
or even
#include <libweston/dbus.h>
IMO such problem is smaller than the churn caused by any of the alternatives,
and we should be able to catch those in review. We might even be able to catch
those with grep in CI if necessary.
The "bad" include style was found with:
$ for h in shared/*.h; do git grep -F $(basename $h); done | grep -vF '"shared/'
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Now that all backends pass in a list of acceptable DRM formats, that is used to
determine if the EGLConfig has an alpha channel or not. Therefore the
opaque_attribs and alpha_attribs are now useless, and we can remove the whole
config_attribs argument from the API.
gl_renderer_get_egl_config() uses an internal attrib list that matches at least
the union of the opaque_attribs and alpha_attribs matches.
Overall, behaviour should remain unchanged.
The new attribute array becomes variable in the future, so it is left
non-const.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Replace a direct call to egl_choose_config() with a higher level function
gl_renderer_get_egl_config(). This will make follow-up work easier when
attribute lists will be generated inside gl_renderer_get_egl_config() instead
of passed in as is.
We explicitly replace visual_id with drm_formats, because that is what they
really are. Only the DRM backend passes in other than NULL/0, and if other
backends start caring about the actual pixel format, drm_format is the lingua
franca.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
In an attempt to pull more of EGLConfig choosing into one place, refactor code
into the new gl_renderer_get_egl_config(). The purpose of this function is to
find an EGL config that not only satisfies the requested attributes and the
pixel formats if given but also makes sure the config is generally compatible
with the single GL context we have.
All this was already checked in gl_renderer_create_window_surface(), but
gl_renderer_create_pbuffer_surface() is still missing it. This patch is
preparation for fixing the pbuffer path.
We explicitly replace visual_id with drm_formats, because that is what they
really are. Only the DRM backend passes in other than NULL/0, and if other
backends start caring about the actual pixel format, drm_format is the lingua
franca.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Replace one more open-coded pixel format translation map with a call to our
central pixel format database, reducing duplication of format information.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
No caller ever used anything but NULL here, so just use NULL to simplify code.
In fact, no EGL platform defined today even defines any platform attributes
except the X11 platform for choosing a non-default SCREEN.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The member disable_planes of weston_output signifies the recording
status of the output, and is incremented and decremented from various
places. This patch provides helper functions to increment and decrement
the counter. These functions can then be used to do processing, before
and after the recording has started or stopped.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Currently drm-layer supports HDCP1.4 using connector property:
Content Protection. This property if available for a platform, can be
read and set for requesting content-protection.
Also, the patch series [1] adds HDCP2.2 support in drm, and patch [2]
adds support to send udev events for change in connector properties,
made by the kernel.
This patch adds these HDCP connector properties in weston, and exposes
the content-protection support to the client for drm-backend.
It adds the enums to represent 'Content Protection' and 'Content Type'
connector properties exposed by drm layer. It adds a member
'protection' in drm_output_state, to store the desired protection
from the weston_output in the drm-backend output-repaint cycle. This
is then used to write the HDCP connector properties for the drm_heads
attached to the drm_output.
The kernel sends uevents to the user-space for any change made by it
in the "Content Protection" connector property. No event is sent in
case of change in the property made by the user-space.
It means, when there is a change of the property value from "DESIRED"
to "ENABLE" i.e. successful authentication by the kernel, a uevent
will be generated, but in case of userspace requesting for disabling
the protection by writing "UNDESIRED" into the property, no uevent
will be generated.
This patch also adds support for handling new udev events for HDCP
connector property changes. Any such change, triggers change in the
weston_head's current_protection.
[1] https://patchwork.freedesktop.org/series/57233/#rev7
[2] https://patchwork.freedesktop.org/patch/303903/?series=57233&rev=7
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
logind will send a device changed at start of day, prompting a session
active change, but the session will already be active from compositor
creation.
Avoid unnecessary signal emition and drm state invalidation.
The logind launcher sets the session active when the graphics device is
assigned to weston from systemd. Unfortunately 8d23ab78 didnt check whether the
session was already active before setting it active and emitting the session
active signal.
The handler for that signal then proceeds to invalidate the entire graphics
state, causing the next redraw to reconfigure all outputs (to the same routing
as they were already).
This then massively increases the likelihood of trying to configure a crtc that
has a commit already in flight.
Add the old behaviour of only emitting a signal on a changed state.
This avoids the issue for now by reducing the chances of a clash. Future
work will need to fix the issue properly (better handling of state_invalid e.g.
wait for quiescence, better monitoring for crtc usage clashes etc).
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Depending on system loading, weston-launcher could drop the drm
master access before the compositor and all the clients receive
the notification. In this case, some commit could be sent to the
drm driver too late and get refused with error EACCES.
This error condition is not properly managed and causes weston to
hang.
Change the return type of start_repaint_loop() and repaint_flush()
from void to int, and return 0 on success or -1 if the repaint has
to be cancelled.
In the callers of start_repaint_loop() and repaint_flush() handle
the return value and cancel the repaint when needed.
In backend-drm detect the error EACCES and return -1.
Note: to keep the code cleaner, this change inverts the execution
order between weston_output_schedule_repaint_reset() and
repaint_cancel().
No need to wait for suspend or for any notification; in case the
weston reschedules a repaint, it will get EACCES again.
At resume, damage-all guarantees a complete repaint.
This fix is for atomic modeset only.
Legacy modeset suffers from similar problems, but it is not fixed
by this change. Since drm_pending_state_apply() never returns
error for legacy modeset, this change has no impact on legacy
modeset.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/117
The GBM and DRM constants have the same meaning. In preparation
to make the DRM backend compile without libgbm, prefer the DRM
constants where GBM is not needed.
Signed-off-by: Stefan Agner <stefan@agner.ch>
drm_assign_planes() is called to separate views out and decide what will
be taken out for plane composition and what will be left for the
renderer to compose.
It calls drm_output_propose_state() in order to find a good
configuration, which itself has a number of helpers that it calls. Break
these out into a separate file.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Most of the state helpers (create, destroy, duplicate, etc) state, are
relatively straightforward and can live in a separate file.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a new file which handles most of the actual KMS API use. This
covers the property handling (in which we map between KMS properties and
our internal representations), as well as actually applying state
through atomic modesetting or the legacy SetCrtc/PageFlip/DPMS APIs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a new file for the DRM backend's handling of output modes, e.g.
resolution, aspect ratio, preferred mode selection, EDID parsing.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a helper function which populates a drm_head with the information
extracted from its connector's EDID and any other properties we can
find, such as physical size and connection status.
This is currently quite small, but may become more complex in future as
we parse EDID better. It also prepares to move this function into
another file in the next commit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a new header called drm-internal.h, and move many of drm.c's
declarations and helpers to it.
This will allow us to split the DRM backend into multiple files.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This fixes warnings for weston-debug, input, compositor, log and
linux-explicit-sync. Warnings range from swapping '[in]', '[out]' with
the function arguments to wrong parameter names.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
As of the previous commit, we never create state which uses overlay
planes on non-atomic drivers. We can thus remove the calls to
drmModeSetPlane.
The only time we ever waited for vblank events was when we had called
drmModeSetPlane and needed to make sure we waited until it was active.
We can thus also remove all the vblank event machinery.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Without atomic modesetting, we have no way to know whether or not our
desired configuration is usable. It might fail for a number of reasons:
scaling limits, bandwidth limits, global resource (e.g. decompression)
unit contention, or really just anything.
Not only this, but there is no good way to ensure that our configuration
actually lands together in the same refresh cycle - hence the 'atomic'
in atomic modesetting. Some drivers implement a synchronously blocking
drmModeSetPlane, whereas others return immediately. Using overlay planes
can thus decimate your framerate.
The pre-atomic API is not extensible either, so we need numerous out
clauses: fail if we're cropping or scaling (sometimes), or changing
formats, or fencing, or ...
Now we've had atomic support stable for a couple of releases, just
remove support for doing anything more fancy than displaying our
composited output and a cursor with drivers which don't support atomic
modesetting.
Support for using overlay planes was already disabled by default when
using the legacy API, and required a debug key combination to toggle it
on by flipping the sprites_are_broken variable. We can ensure that we
never try to use it on legacy by simply ignoring the hotkey when in
legacy mode.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When using logind launcher, we receive a PauseDevice "gone" message
from logind session management for each device we close while looking
for KMS devices.
Make logind notify the backend of the device add/remove so that the
backend can decide what to do, instead of assuming that if it is a
DRM_MAJOR device the session should be (de)activated. The backend can
then react to its specific device.
Fixes#251
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
A output repaint loop isn't scheduled beacuse the output repaint_status
is AWAITING_COMPLETION when dmps is turned off in update_complete().
Therefore, the display attached to the output is remain inactive even if
weston wakes up. By going through finish_frame, the output
repaint_status is fixed to correct status.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Move the DRM-backend into a new sub-directory to make it stand out from
libweston core. This facilitates splitting drm.c into more files later.
vaapi-recorder is used only by DRM-backend, move that too.
libbacklight is used only by DRM-backend and a manual test program, and is
moved as well.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
As we transition towards a more generic API for weston loggging
framework rename weston_debug_compositor to weston_log_context to show
the fact that this is not really debug but a logging context.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The printf() format specifier "%m" is a glibc extension to print
the string returned by strerror(errno). While supported by other
libraries (e.g. uClibc and musl), it is not widely portable.
In Weston code the format string is often passed to a logging
function that calls other syscalls before the conversion of "%m"
takes place. If one of such syscall modifies the value in errno,
the conversion of "%m" will incorrectly report the error string
corresponding to the new value of errno.
Remove all the occurrences of the specifier "%m" in Weston code
by using directly the string returned by strerror(errno).
While there, fix some minor indentation issue.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Leandro Ribeiro
Emmanuel Gil Peyrot
Marius Vlad
Daniel Stone
Marius Vlad
Stefan Agner
Pekka Paalanen
Ankit Nautiyal
Robert Beckett
Antonio Borneo
Tomohito Esaki
Antonio Borneo