The check to avoid calling weston_keyboard_set_focus() for a seat that
didn't have a keyboard in restore_focus_state() was cheking the wrong
seat (the one from the previous loop). That caused a crash when
switching workspaces if there was an extra seat that didn't have a
keyboard.
https://bugs.freedesktop.org/show_bug.cgi?id=78349
If simple-touch ran on a compositor with multiple seats, and the first
one happened to have the touch capability while the second one didn't,
the handler for seat capabilities would destroy the wl_touch device it
created on the first call for the first seat when it was called a again
for the second seat that has not touch capabilities.
Fix this problem by creating a separate struct for each seat.
https://bugs.freedesktop.org/show_bug.cgi?id=78365
Views that extend past the bottom of the output are still visible after
the workspace animation ends but before its layer is hidden. When the
layer was hidden, nothing would cause those regions to be repainted,
leading to artifacts.
https://bugs.freedesktop.org/show_bug.cgi?id=78363
Quells warning:
clients/keyboard.c: In function ‘keyboard_handle_key.isra.5’:
clients/keyboard.c:556:11: warning: ‘label’ may be used uninitialized in
this function [-Wuninitialized]
Signed-off-by: Bryce Harrington <b.harrington@samsung.com>
If data is NULL, then we jumped to error which attempts to
dereference data. Instead, just close(fd) and return when
data is NULL.
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
The zoom translation is just a scale and a translate. The translation
is calculated based on the coordinates of the pointer which are in
global space. Previously the calculated translation was transformed by
the output transformation so that when the zoom transform is applied
after the output transform then it will be correct. However if we just
apply the zoom transformation first then we get the same result
without the zoom code having to be aware of the output transformation.
This also fixes weston_output_transform_coordinate which was applying
the output and zoom transforms in the wrong order.
https://bugs.freedesktop.org/show_bug.cgi?id=78211
Checking for return value in main.c for wcap_decoder_create function
and mmap, malloc return value in wcap_decoder_create function to avoid
crashes
Signed-off-by: vivek <vivek.ellur@samsung.com>
With xdg_shell wl_shell starting to diverge in how they work, there's
less shared code in set_fullscreen(). The problem is that the xwayland
window manager calls into set_fulscreen() which now doesn't complete
the fullscreen transition. Add shell_interface_set_fullscreen() for
the shell interface set_fullscreen hook to use.
https://bugs.freedesktop.org/show_bug.cgi?id=78230
If the scale for the cursor surface doesn't match that of the output
then we shouldn't use the cursor overlay because otherwise it will be
drawn at the wrong size. This problem is particularly noticable with
multiple pointers because it randomly alternates between drawing one
cursor or the other at a larger size depending on which one gets put
in the cursor overlay.
When converting output-relative coordinates (such as from an input
event) to global coordinates it now takes into account the zoom
transform. Previously this would only work for the primary pointer
because the transform doesn't affect the primary pointer position due
to that way zoom follows the mouse. Touch events and multiple pointers
were not working correctly.
https://bugs.freedesktop.org/show_bug.cgi?id=68620
send_configure was originally modelled after
wl_shell_surface::send_configure, which takes these arguments. However,
the X WM and xdg_surface::configure variants don't use these arguments.
We already store the resize edges for a surface while it's being
resized, so just use the saved state in the wl_shell_surface variant.
There is no need to unset WAYLAND_DISPLAY and WAYLAND_SOCKET when screen-share
launches the fullscreen shell server. This was done originally in case the
launched server decided to use the wayland backend based on the presence of
these. However, we pass a command line argument telling it to use the RDP
backend, which overrides the automatic backend selection based on the
environment.
Keeping these environment variables allows the launched fullscreen shell server
to know the original server's display name, which it may need in order to show
a configuration UI.
Signed-off-by: Andrew Wedgbury <andrew.wedgbury@realvnc.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Make sure we're looking at the right location. The frame could have
received a motion event from a pointer from a different wl_seat, but
under X it looks like our core pointer moved. Move the frame pointer
to the button press location before deciding what to do.
If we're going to move or resize an xwayland surface, we used to just
pick the first seat in the list for doing the move/resize. Ideally we
can map from the XInput device doing the click to the corresponding
weston_seat, but that requires using xcb xinput, which isn't well supported.
Instead, lets use a simple heuristic that just picks the pointer that
most recently delivered a button event to the window in question.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=73807
This moves the check for shsurf->grabbed into surface_move() and
surface_resize(), which are shared with the xwayland code. This prevents
trying to resize or move an xwayland window with multiple pointers.
9c376b54ea fixed the crash when a client goes
away during a resize grab. The shsurf->resource is set to NULL in that
case and we were trying to send out events to a NULL resource. However,
xwayland shell surfaces are created by the xwayland module and don't have a
resource. We use a different function pointer for sending the configure
events that handle the events inside xwayland instead of sending protocol
events.
To fix all this, we just move the check for a NULL resource into the
functions that we use for sending configure events for wl_shell and
xdg_shell.
The geometry for visible views will keep unchanged,
weston_view_set_position() doesn't mark these views
as dirty. So there is no chance for them to reassign output, then
these views will disappear.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=72946
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
We need a valid kb_mode to restore to in case weston-launch dies and
weston has to clean up the tty. We don't get a chance to read out the
kb mode before weston-launch changes it, but it's safe to assume that it's
always K_UNICODE.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=77455
When commit 07926d90 factored out the code that chooses in which layer
a surface is added to, it changed the behavior for surfaces with no
type. Instead of not adding it to any layer, the surface is added to
the current workspace.
This patch restores the old behavior.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=77527
Previously, desktop-shell would only create its internal shell_seat object
for each seat available when the desktop-shell module is loaded. This is a
problem any time seats are created dynamically. In particular, the Wayland
and RDP backends create seats on an as-needed basis and they weren't
getting picked up proprely by desktop-shell.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=77649
lower_fullscreen_surface() was removing fullscreen surfaces from
the fullscreen layer and inserting them in the normal workspace
layer. However, those fullscreen surfaces were never put back in
the fullscreen layer, causing bugs such as unrelated surfaces
being drawn between a fullscreen surface and its black view.
Change the lower_fullscreen_surface() logic so that it lowers
fullscreen surfaces to the workspace layer *and* hides the
black views. Make this reversible by re-configuring the lowered
fullscreen surface: when it is re-configured, the black view
will be shown again and the surface will be restacked in the
fullscreen layer.
https://bugs.freedesktop.org/show_bug.cgi?id=73575https://bugs.freedesktop.org/show_bug.cgi?id=74221https://bugs.freedesktop.org/show_bug.cgi?id=74222
Ideally, we'll update the key event handling to deliver events to widgets,
but in the meantime, just blocking key event delivery while a grab is
active goes a long way.
If a client exists during a resize grab, the resource for the shell
surface being resized is destroyed. The shell surface is not destroyed
immediately, however, because of the window close animation. In that
case, the compositor would crash trying to send configure events to
the surface being resized, since it would pass a NULL pointer to
wl_resource_post_event().
The code for the resize grab was already able to handle the surface
going away, so expand it to also handle the resource going away and
fix the crash.
https://bugs.freedesktop.org/show_bug.cgi?id=77344
In order to do the window close animation, a reference for a destroyed
surface is kept. However, the reference count was also increased for
unmapped surfaces, in which case the animation wouldn't run. Since the
reference count was decremented in the animation done function, it would
never be decreased for unmapped surfaces, causing them to not be
released.
The close animation also changed how shell surfaces are released. The
destroy function for its resource was changed to not deallocate the
surface, and instead keep it around until the animation finishes and
the weston surface is destroyed. The destruction should happen in the
destroy listener for the weston surface, but it wouldn't destroy the
shell surface in the case the resource was still valid, assuming that
it would be freed in the resource destroy function.
This ensures the allocation results are checked for NULL (out of
memory), and terminates the program in such a case.
Signed-off-by: Bryce Harrington <b.harrington@samsung.com>
In order to apply the zoom transformation to the output matrix, Weston was
doing the following:
• Create a temporary matrix to hold the translation
• Invert the translation matrix using weston_matrix_invert into
another temporary matrix
• Scale that matrix by the scale factor
• Multiply the current matrix with the temporary matrix
Using weston_matrix_invert to invert a translation matrix is over the top.
Instead we can just negate the values we pass to weston_matrix_translate.
Matrix multiplication is associative so creating a temporary matrix to hold the
scale and translation transform should be equivalent to just applying them
directly to the output matrix.
It looks like the handler for frame events from the wl_touch interface for
widgets may have been erroneously copied from the cancel handler so that it
removes all handlers as they are processed. I don't think this makes much sense
for the frame event. This was stopping the panel icons from being pushable with
touch events when using libinput since commit 1679f232e5. All that commit
does it make it start sending the frame events.
Make sure that we don't map a device to an invalid output pointer and
intead remap devices when an output is created.
v2: fix the error with libinput too.
If the output a touchscreen is paired to is unplugged, events coming
from it should be ignored. Commit 17bccaed introduced logic for that
in evdev_flush_pending_damage(). However, the break statements it
introduced would cause the assertion after the switch statement to
fail.
That function has the odd behavior that goto's are used to skip the
assertion after the switch statement and jump to the hunk of code that
marks the event as processed. Only in the case where the event type has
an invalid value the assertion should trigger. So this patch fixes the
problem by moving the assertion into the default case of the switch
and replacing the goto statements with break ones.
https://bugs.freedesktop.org/show_bug.cgi?id=73950
Ander Conselvan de Oliveira
Bryce W. Harrington
U. Artie Eoff
Neil Roberts
vivek
Kristian Høgsberg
Jasper St. Pierre
Andrew Wedgbury
Xiong Zhang
Jason Ekstrand
Emilio Pozuelo Monfort