The set_windowed and set_fullscreen functions are only useful on a
desktop shell, and never called on fullscreen-shell.
Remove the confusing dead code, and ensure we notice if these functions
get called in the wrong environment.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
To be more symmetric with wayland_output_set_fullscreen(), implement the
xdg-shell path in wayland_output_set_windowed(). This should make it
possible to use the fullscreen key binding to toggle between a floating
window and fullscreen also under xdg-shell.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
I could not find anywhere where struct parent_output was freed, so
apparently we were leaking it.
Check against wayland_backend_register_output() and add the missing
clean-up: removal from the parent output list, and free().
registry_handle_global_remove() also needs fixing to use a safer loop,
because now we are actually removing the list item.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
The wayland-backend with --sprawl is one way to trigger
wayland_output_create_for_parent_output(), which intends to find a mode
from the parent mode list and use it. Calling wayland_output_set_size()
initialized an embedded struct weston_mode and inserts that into the
mode list. Then the assignment output->mode = *mode; corrupts the
mode_list by overwriting the link entry. This leads to an endless loop
in bind_output() in compositor.c.
Fix this by manually doing the setup that wayland_output_set_size() did
and do not call it.
As a side effect, it now relays the parent compositor's physical output
size to our own clients. It no longer smashes the refresh rate either.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
This member is only ever set and never read, therefore it is dead.
Delete dead code.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Calling wl_display_roundtrip() from within a Wayland event handler means
we will re-enter event dispatch, that is, it will lead to recursive
dispatch. Even if libwayland-client was safe, this would lead to
unexpected code paths: the first event handler function has not returned
when other event handler functions may get called. In this particular
case it maybe didn't hurt, but it's still a fragile pattern to use.
Replace the wl_display_roundtrip() with a manual sync callback to do the
work.
This does not break the wayland-backend initialization sequence, because
sprawl_across_outputs was set only after the roundtrip to ensure
wl_registry globals have been received so the code would not have been
hit anyway, and weston_backend_init() also has a second roundtrip that
ensures the per wl_output events have been received before continuing.
For wayland-backend output hotplug the change is insignificant because
it will only delay the output creation a bit, and the parent outputs are
not processed anywhere in between.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Surprisingly, WESTON_OPTION_BOOLEAN uses the type int32_t, not bool.
Passing in a pointer bool does not end well. Fix this to pass in
pointers as parse_options() expects.
This fixes a bug where 'weston --use-pixman --sprawl' would work but
'weston --sprawl --use-pixman' would ignore the --sprawl option.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
If a surface is in state A, and we just sent a configure for state B,
setting back state A would be ignored, because state B has not been
committed yet.
Now, we check against the latest configured state (which is current
state if configure list is empty).
Reported on wlroots https://github.com/swaywm/wlroots/pull/280
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
This patch fixes the wayland backend to not use two different
presentation methods when running on fullscreen-shell.
See also: https://patchwork.freedesktop.org/patch/114534/
v2:
- Add missing wayland_output_resize_surface() call
- Start repaint loop after initial frame has been drawn
v3:
- Redraw the initial frame if present for mode fails
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93514
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v2: Fix use after free spotted by Daniel Stone
Signed-off-by: Sergi Granell <xerpi.g.12@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The opaque region is a few pixels off due to the rounded corners
of the frame decorations, and, therefore, the input region
matches the window's geometry more closely.
Signed-off-by: Sergi Granell <xerpi.g.12@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a test environment variable to allow disabling universal planes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If the user has passed an INVALID modifier, it's because there is no
applicable modifier, and the buffer layout should be determined by a
magic side-channel call (e.g. bo_get_tiling). If the modifier is
INVALID, don't try to pass it through to EGL, but just drop it.
On the other hand, if a modifier _is_ explicitly specified and we don't
have the modifiers extension, then refuse to import the buffer.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The timer was never removed anywhere. Remove it in disable() to match
what happens in enable().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
This is a more logical name for the function, matching the pattern used
in other backends and the hook names.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
If we pass the base->enabled test, then the renderer output is
guaranteed to be there, so we can just destroy it.
Destroying it before unmap makes the sequence match better the enable
path.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
Rename fbdev_frame_buffer_destroy() to fbdev_frame_buffer_unmap()
because that is what it does. Adding the destruction of hw_surface in it
makes it the perfect counterpart to fbdev_frame_buffer_map() which
simplifies the code.
fbdev_frame_buffer_map() can no longer call that, so just open-code the
munmap() there. It is an error path, we don't really care about
failures in an error path.
The error path of fbdev_output_enable() is converted to call
buffer_unmap() since that is exactly what it did.
fbdev_output_disable() became redundant, being identical to
fbdev_frame_buffer_unmap().
Invariant: output->hw_surface cannot be non-NULL without output->fb
being non-NULL. hw_surface wraps the mmapped memory so cannot exist
without the mmap.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
A few functions had argument 'output' which was not used at all. Remove
such unused arguments.
The coming migration to the head-based output API would have made it
awkward to come up with the output argument for these, but luckily they
are not actually needed.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Sergi Granell <xerpi.g.12@gmail.com>
Acked-by Daniel Stone <daniels@collabora.com>
Change all backends to set the core backend pointer early.
This is necessary for libweston core to be able to access the backend
vfuncs before the backend init function returns. Particularly,
weston_output_init() will be needing to inspect the backend vfuncs to
see if the backend has been converted to a new API. Backends that create
outputs as part of their init would fail without setting the pointer
earlier.
For consistency, all backends are modified instead of just those that
could hit an issue.
Libweston core will take care of resetting the backend pointer to NULL
in case of error since "libweston: ensure backend is not loaded twice".
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
Check and ensure that a compositor can only load one backend
successfully. If a backend fails to load, it is theoretically possible
to try another backend. Once loading succeeds, only destroying the
compositor would allow "unloading" a backend.
If backend init fail, ensure the backend pointer remains NULL to avoid
calling into a half-loaded backend on e.g. compositor destruction.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
'release' is a more appropriate name because the function does not free
the underlying memory. The main reason for this is that we need the name
weston_output_destroy() for new API that actually will free also the
underlying memory.
Since the function is only used in backends and external backends are
not a thing, this does not cause libweston major version bump, even
though it does change the ABI. There is no way external users could have
successfully used this function.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
A client may have bound the same wl_output multiple times, for who knows
what reason. As the server cannot know which wl_output resource to use
for which wl_surface, send enter/leave events for all of them.
This is a protocol correctness fix.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
Move the remaining scattered setup of the fixed properties into
create_output_for_connector(). All these are already known and they
cannot change.
This helps future refactoring.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
This fixes a regression where monitor make and model would always be
advertised as "unknown" to Wayland clients. The EDID strings were parsed
at create_output_for_connector() time, but the fallback "unknown" values
were set in weston_drm_output_api::set_mode vfunc later. This made the
correct monitor info be shown in the log, but not sent to clients.
The purpose of the "unknown" assignments is to give fallback values in
case EDID is not providing them.
Fix all that by moving all setting of the make, model and serial into
create_output_for_connector(). These values cannot change afterwards
anyway. While at it, document find_and_parse_output_edid().
The ugly casts in create_output_for_connector() are required to silence
compositor warnings from ignoring const attribute. This is temporary,
and a future refactoring will get rid of the casts.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
Move the weston_output_init() call into wayland_output_create_common().
This avoids passing the name twice to different functions, and follows
the precedent set in "libweston: weston_output_init(..., +name)" for
calling init before accessing fields.
Since the error paths in wayland_output_create_for_parent_output() and
wayland_output_create_fullscreen() are now guaranteed to have
weston_output init'd, call weston_output_destroy() appropriately. There
might be more to free than just the name.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
Add 'name' argument to weston_output_init(). This is much more obvious
than the assert inside weston_output_init() to ensure the caller has set
a field in weston_output first.
Now weston_output_init() will strdup() the name itself, which means we
can drop a whole bunch of strdup()s in the backends. This matches
weston_output_destroy() which was already calling free() on the name.
All backends are slightly reordered to call weston_output_init() before
accessing any fields of weston_output, except the Wayland backend which
would make it a little awkward to do it in this patch. Mind, that
weston_output_init() still does not reset the struct to zero - it is
presumed the caller has done it, since weston_output is embedded in the
backend output structs.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: David Fort <contact@hardening-consulting.com>
[Daniel: document name copying]
Acked-by Daniel Stone <daniels@collabora.com>
There are IVI tests that require an output. Previously these tests would
silently skip if no outputs were present. However, a test setup should
always have outputs with these tests. Skipping could easily leave the
tests dead without notice.
Make these tests fail instead of skip if there are no outputs.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Acked-by Daniel Stone <daniels@collabora.com>
Initialize the list in weston_output_init() instead of doing it
separately in each backend.
One would expect weston_output_init() to initialize all weston_output
members, at least those that are not NULL.
We rely on the set_size() functions to be called only once, as is
assert()'d. If set_size() becomes callable multiple times, this patch
will force them to be fixed to properly manage the mode list instead of
losing all members.
compositor-wayland.c is strange in
wayland_output_create_for_parent_output(): it first called
wayland_output_set_size() that initialized the mode list with a single
mode manufactured from width and height and set that mode as current.
Then it continued to reset the mode list and adding the list of modes
from the parent output, leaving the current mode left to point to a mode
struct that is no longer in the mode list and with a broken 'link'
element. This patch changes things such that the manufactured mode is
left in the list, and the parent mode list is added. This is probably
not quite right either.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
With FreeRDP 2.0 the crypto needs to be initialized or we fail as soon as we try to
compute a md5. The API also changed for the suppress output callback.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
On the musl C library, tests/timespec-text.c does not build, with the
following error:
In file included from tests/timespec-test.c:36:0:
./shared/timespec-util.h:41:21: warning: ‘struct timespec’ declared
inside parameter list will not be visible outside of this definition
or declaration
timespec_sub(struct timespec *r,
^~~~~~~~
[...]
Indeed, struct timespec is defined in time.h, so we must include it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Use EGL fence sync objects to emit timepoints for the beginning and the
end of rendering on the GPU. The timepoints are emitted asynchronously
using the sync file fds associated with the fence sync objects. The sync
file fds are acquired using the facilities provided by the
EGL_ANDROID_native_fence_sync extension.
The asynchronous timepoint submissions are stored in a list in
gl_output_state until they are executed, and any pending submissions
that remain at output destruction time are cleaned up.
If timelining is inactive or the required EGL extensions are not
present, then GPU timepoint processing and emission are skipped.
Note that the GPU timestamps returned by sync files are in the
CLOCK_MONOTONIC clock domain, and are thus compatible with the
timeline timestamps (which also are in the CLOCK_MONOTONIC domain).
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The sync file functionality is required by the upcoming GPU render
timeline work, but it's only available in relatively new linux kernel
versions (4.7 and above).
This commit provides a "sanitized" version of the required sync file
definitions. On systems that don't have the sync file header (due to
having an older kernel), we will be able to fall back to our own
definitions when building.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Check for the EGL_KHR_fence_sync and EGL_ANDROID_native_fence_sync
extensions and get pointers to required extension functions.
These extensions allow us to acquire GPU timestamp information
asynchronously, and are required by the upcoming work to add
rendering begin/end timepoints to the weston timeline.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The purpose of this argument is to hold timestamp information about
events that occurred on the GPU. This argument allows us to include GPU
timestamps in timepoints such as the beginning and end of frame
rendering.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This change replaces a queued emission of buffer-release events (which
is prone to starvation) with a regular event emission. This means that
client programs no longer need to secretly install surface frame
listeners just to guarantee that they get correctly notified of buffer
lifecycle events.
v2:
More information about the historical reasons why this change hadn't
happened yet, and the consensus to finally move ahead with it can be
found at the discussion terminating in this message:
https://lists.freedesktop.org/archives/wayland-devel/2017-September/035147.html
Signed-off-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Not referenced anywhere ever, has been there since the introduction of
fbdev-backend.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Fix the assumption that MAP_FAILED would be equal to NULL. It is not.
Set 'fb' explicitly to NULL on mmap failure so that comparisons to NULL
would produce the expected result.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Simplifies the code, and makes moving weston_output_init() into
wayland_output_create_common() a little easier.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Gets rid of the constant size char array.
While here, document the function.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
This patch disables the opacity binding when the modifier is configured
to `none' in weston.ini, and thus supports use cases where one does not
want to have this binding.
Signed-off-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This patch changes the zoom binding to use the modifier configured in
weston.ini instead of hardcoding MODIFIER_SUPER.
Signed-off-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When calibrating touchscreen with weston-calibrator, you can use the mouse to
click on the cross which is recorded as a touch event. This event is used to
compute the final calibration of the touchscreen which results in invalid
touchscreen calibration and broken touchscreen behaviour.
In order to avoid to use the mouse in weston-calibrator, we disable mouse
operation by default and add a parameter "--enable-mouse" to enable it.
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
weston_check_egl_extension() returns a bool, not a pointer.
Fixes: ce5b614c80 "clients/nested: use weston_check_egl_extension
over strstr"
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Remove the option, because it is hard to use.
Drm connector ids are hard to reach for users,
and they can change when kernel or device tree
is modified.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[Pekka: bump WESTON_DRM_BACKEND_CONFIG_VERSION]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Two cases are tested: success and fail case of the screen-remove-layer API.
Signed-off-by: Michael Teyfel <mteyfel@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The old code for scheduling configure events on idle looked like:
if (configure_scheduled) {
if (this_event_is_the_same) {
remove_timer();
return;
}
}
If we queued one new event (either changed, or the client had never
received any configure event), followed immediately by one event which
was the same as the first, we would delete the scheduled send of the
first event.
Fix this by treating unconfigured surface as never the same.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
drm_pending_state is currently skeletal, but will be used to retain
data through begin_repaint -> assign_planes -> repaint -> repaint_flush.
The flush and cancel functions are currently identical, only freeing the
state, but they will be used for different purposes in later patches.
Specifically, the intent is to apply any pending output changes (through
PageFlip/SetCrtc, or the atomic ioctls) in flush, and only free the
state in cancel.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Retain drm_plane tracking objects for all actual DRM planes when using
universal planes, not just overlay planes. Rename uses of 'sprite' to
'plane' to make it clear that it can now be any kind of plane, not just
an overlay/sprite.
These are currently unused.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Pekka Paalanen
Quentin Glidic
Armin Krezović
Sergi Granell
Daniel Stone
David Fort
Yann E. MORIN
Alexandros Frantzis
Matt Hoosier
Ian Ray
Fabien Lahoudere
Eric Engestrom
Ucan, Emre (ADITG/SW1)
Michael Teyfel