The xwm used to automatically send to Xwayland the position of X windows
when that changed, using the x,y of the primary view of the surface.
This works fine for the desktop shell but less so for others.
This patch adds a 'send_position' vfunc to the weston_shell_client that
the shell will call when it wants to let Xwayland know what the position
of a window is.
The logic used by the desktop-shell for that is exactly the same the xwm
used to have.
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: David Fort <contact@hardening-consulting.com>
Patch updated to remove dead lines as suggested by Daniel Stone
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The xwm gets a primary view for a X window using the get_primary_view
vfunc of the shell_interface struct. Storing it is dangerous though
because it doesn't listen for its destruction so it may end up using the
old stored view pointer after that view was freed, or after the primary
view for that window was changed to another one.
Fetch the primary view just before using it every time and try to not
abuse this 'primary view' concept which may map badly to some shells:
iterate over all the views instead when it makes sense.
Tested-by: Benoit Gschwind <gschwind@gnu-log.net>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
xwayland source is checked, so it dispatches twice on any event.
If the other turn has no events to dispatch, we flush the connection
redundantly
v2. do not flood logs with 'unhandled event' messages
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
- opening braces are on the same line as the if statement
- opening braces are not on the same line as the function name
- space between for/while/if and opening parenthesis
Signed-off-by: Dawid Gajownik <gajownik@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
When we get a focus in event from an X window which is not the one
we last set as the active window, reset the focus.
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
An earlier patch made surface_resize() and surface_move() take pointers
instead of seats, this updates the weston_shell_interface resize and move to
match.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Keyboards and pointers aren't freed when devices are removed, so we should
really be testing keyboard_device_count and pointer_device_count in most
cases, not the actual pointers. Otherwise we end up with different
behaviour after removing a device than we had before it was inserted.
This commit renames the touch/keyboard/pointer pointers and adds helper
functions to get them that hide this complexity and return NULL when
*_device_count is 0.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
To help reduce code duplication and also 'kitchen-sink' includes
the ARRAY_LENGTH macro was moved to a stand-alone file and
referenced from the sources consuming it. Other macros will be
added in subsequent passes.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Enable all hints by default. This fixes the "Maximize" button in apps that
don't set any hints - e.g., xclock or Firefox. (There's still a problem, though:
"decorate" is sometimes treated as a boolean, sometimes as a bitmask.)
Handle MWM_DECOR_ALL correctly. It looks like it's supposed to invert the values
of the rest of the flags.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-By: Giulio Camuffo <giuliocamuffo@gmail.com>
If windows are created and quickly destroyed it's possible that they'll be
on the unpaired window list at the time of surface creation. The surface
destroy listener for that surface isn't properly freed and a crash happens
some time later.
This patch removes the window from the unpaired list during unmap, so we
should never get to the destroy handler with a surface destroy listener set.
Just in case there's another path to that failure, I've also removed the
surface destroy listener in the destory handler.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This lets us verify that all callers are actually testing for a
successful hash lookup at compile time.
All current users of hash_table_lookup are converted to the new
wm_lookup_window() and the appropriate success check is added.
This fixes any call sites that used to assume a successful return
and dereference a NULL pointer.
This closes http://bugs.freedesktop.org/show_bug.cgi?id=83994
The xwayland test has been failing because weston crashes due to
a hash lookup failure and a subsequent dereference of the returned
NULL pointer.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The first break in TYPE_WM_PROTOCOLS was almost certainly intended to be
nested within the if statement.
Even if it wasn't, it makes sense there.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Now that we've removed the XYToWindow handler in Xwayland, we actually
have to stack windows properly. This stacks windows on top when
activating them.
Note that for a fully robust Xwayland implementation, we'll need a
complete stack tracker implementation, unfortunately.
Reviewed-by: Daniel Stone <daniels@collabora.com>
All the surfaces from all the X clients share the same wl_client so
wl_client_get_credentials can't be used to get the pid of the X
clients.
The shell may need to know the pid to be able to associate a surface
with e.g. a DBus service.
[Pekka: fixed trivial merge conflicts.]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We were correctly handling decorated and fullscreen clients, but left
uninitialized values in the input region for undecorated clients. Fix
this behavi-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Failing to remove this can result in a crash when the signal is sent
after the window manager is destroyed.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-By: Giulio Camuffo <giuliocamuffo@gmail.com>
This patch adds the maximize button to the window frame for the windows
which set the MWM_DECOR_MAXIMIZE hint, and it wires it with the shell
via a new method in weston_shell_interface.
Additionally, it also listens for the wm hints coming from the client,
but it doesn't support maximizing a window only vertically or horizontally.
The window will be maximized only when both directions are maximized.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Some X clients use the _NET_WM_DESKTOP property to tell if the window
is mapped or not. If set, it should say the virtual desktop the window
is currently in, if unset it means the window is unmapped.
The xwm currently has no way to know how many virtual desktops
the shell plugin has, or if it even implements the metaphor. For now
just set the property to 0, meaning the first desktop, if the window is
mapped, and delete the property when unmapped.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Some X clients create popup or tooltips windows as top level, without
setting them as override redirect or as transient. Since we don't want
to take the focus away from a surface when one of its popup is opened,
check the _NET_WM_WINDOW_TYPE of the X surfaces being mapped and set
them as inactive if it is one of some types.
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
To produce the bug, build and run: (you don't need the game data to test)
https://github.com/clintbellanger/flare-engine/
$ mv ~/.config/flare ~/.config/flare.bak
$ ./flare # click 'configure', set full screen mode then click 'ok'
# weston will crash and dump core.
[Pekka: edited the commit message]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
set_fullscreen has been sending configure before changing the state
and xwayland windows added border to the fullscreen size.
This fixes the bug:
https://bugs.freedesktop.org/show_bug.cgi?id=83502
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Ryo Munakata <ryomnktml@gmail.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This function is used and clearly designed only for drawing the shadows.
Rename it so that it has name after what it does and also move some
common code into the function.
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
With the more accurate definition of wl_surface roles in Wayland,
enforce the restriction: a role is always set permanently, and
attempting to change it is a protocol error.
This patch is based on Jasper's patch:
http://lists.freedesktop.org/archives/wayland-devel/2014-August/016811.html
The difference in this patch compared to his are:
- send role errors on the interface whose request triggers it, not on
wl_surface
- an interface could have several requests assigning different roles,
cannot use wl_interface as the unique key; use an arbitary string
instead
- ensure in window-manager.c that create_shell_surface() ->
create_common_surface() is never called with surface->configure set,
to avoid compositor abort
- use wl_resource_post_no_memory() where appropriate instead of
hand-rolling it with wl_resource_post_error()
Ideally we would not add weston_surface::role_name field, but use
weston_surface::configure. At the moment this is not possible though,
because at least shell.c uses several different roles with the same
configure function. Drag'n'drop uses two configure functions for the
same role. The configure hook is also reset in several places,
which is not good for role tracking.
This patch overlooks the wl_surface roles assigned in privileged
extensions: screensaver, panel, background, lock, input panel.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
We shouldn't do WM-y things on an O-R window, including setting input
focus to it.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=81273
Signed-off-by: Boyan Ding <stu_dby@126.com>
Tested-by: Ryo Munakata <ryomnktml@gmail.com>
Acked-by: Christopher Michael <cp.michael@samsung.com>
XCB and wayland input event handling exists together in xwm, which can
cause problems. weston_wm_handle_button is called via XCB events, while
it calls weston_wm_pick_seat_for_window, which uses info from compositor
(pure wayland). It is also true in setting and removing flags of frames.
Races can happen in between, when resize of moving flag of the frame is
still set while the button has been released, the picked seat will be
NULL in weston_wm_handle_button, causing crash. We can safely ignore
moving or resizing if this happens. The same applies to c06a180d.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=82827
Signed-off-by: Boyan Ding <stu_dby@126.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When we moved the configure event size to being based on the window
geometry, we changed the coordinates of the configure request to being
frame geometry based. Frame geometry includes titlebar and border, but
not shadow margins.
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The seat picked in weston_wm_window_handle_moveresize can sometimes
be NULL when it is (somehow) triggered with all buttons released.
This patch checks whether the seat is NULL to avoid NULL dereference.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=80837
Signed-off-by: Boyan Ding <stu_dby@126.com>
If X windows are created and destroyed very fast sometimes the WM window
object gets created and destroyed before we get around to handling client
messages. Failing to check that the window is still valid can result in a
segfault.
When Xwayland requests that a wl_surface be created and the X event is
handled before the wayland requests, a surface ID is stored to
window->surface_id and the window is added to the unpaired window list. When
weston_wm_create_surface is called, the window is removed from the list and
window->surface_id is set to zero. If window->surface_id is not zero when
weston_wm_window_destroy is called, the window is assumed to be in the
unpaired window list and wl_list_remove is called. If
weston_wm_window_handle_surface_id is called and the surface has already
been created, the window is not added to the unpaired window list, but
window->surface_id isn't set to zero. When the window is destroyed, removing
the window from the list is attempted anyway and a crash occurs.
This patch stores the surface ID in a temporary variable and only assigns it
to window->surface_id when the window is added to the unpaired window list.
Otherwise window->surface_id is set to zero to maintain its use as a flag
variable.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=80273
Signed-off-by: Tyler Veness <calcmogul@gmail.com>
Currently, there is a fun flicker when toggling maximization or
fullscreen on a window in mutter or more sophisicated compositors
and WMs.
What happens is that the client want so go maximized, so we
calculate the size that we want the window to resize to (640x480),
and then add on its margins to find the buffer size (+10 = 660x500),
and then send out a configure event for that size. The client
renders to that size, realizes that it's maximized, and then
says "oh hey, my margins are actually 0 now!", and so the compositor
has to send out another configure event.
In order to fix this, make the the configure request correspond to
the window geometry we'd like the window to be at. At the same time,
replace set_margin with set_window_geometry, where we specify a rect
rather than a border around the window.
send_configure was originally modelled after
wl_shell_surface::send_configure, which takes these arguments. However,
the X WM and xdg_surface::configure variants don't use these arguments.
We already store the resize edges for a surface while it's being
resized, so just use the saved state in the wl_shell_surface variant.
Make sure we're looking at the right location. The frame could have
received a motion event from a pointer from a different wl_seat, but
under X it looks like our core pointer moved. Move the frame pointer
to the button press location before deciding what to do.
If we're going to move or resize an xwayland surface, we used to just
pick the first seat in the list for doing the move/resize. Ideally we
can map from the XInput device doing the click to the corresponding
weston_seat, but that requires using xcb xinput, which isn't well supported.
Instead, lets use a simple heuristic that just picks the pointer that
most recently delivered a button event to the window in question.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=73807
Quentin Glidic
Jussi Kukkonen
Jonas Ådahl
Giulio Camuffo
Chris Michael
Benoit Gschwind
Marek Chalupa
Dawid Gajownik
Derek Foreman
Jon Cruz
Bryce Harrington
Murray Calavera
Dima Ryazanov
Jasper St. Pierre
Ryo Munakata
Andrew Engelbrecht
Pekka Paalanen
Boyan Ding
Jason Ekstrand
Tyler Veness
Kristian Høgsberg
Mariusz Ceier