This was supposed to draw black borders around a fullscreen surface that
was smaller than the output. We don't want to special case that in the
repaint loop, but may use a different shader or such. And we want the
surface to have an opaque region that covers the output so that that
will eliminate overdraw of lower surfaces.
This reverts commit fc6ccb868f.
We still need root permissions for drmDrop/SetMaster. Without
integration with ConsoleKit or systemd we also don't have access
to /dev/dri/cardX in the case where we open a new VT.
==30224== Conditional jump or move depends on uninitialised value(s)
==30224== at 0x40EE3A0: evdev_flush_motion (evdev.c:284)
==30224== by 0x40EE6DC: evdev_input_device_data (evdev.c:352)
==30224== by 0x4034710: wl_event_source_fd_dispatch (event-loop.c:76)
==30224== by 0x4035171: wl_event_loop_dispatch (event-loop.c:462)
==30224== by 0x4032F76: wl_display_run (wayland-server.c:785)
==30224== by 0x8050972: main (compositor.c:2183)
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
I could crash Weston by trying to open another menu from a panel while
one menu from it was already showing.
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff40a9872 in popup_grab_focus (grab=0x761968, time=4130706528, surface=0x0, x=-227, y=15) at shell.c:440
440 if (surface->resource.client == client) {
(gdb) bt
0 0x00007ffff40a9872 in popup_grab_focus (grab=0x761968, time=4130706528, surface=0x0, x=-227, y=15) at shell.c:440
1 0x0000000000406977 in weston_device_repick (device=0x70b4e0, time=4130706528) at compositor.c:360
2 0x0000000000406a36 in weston_compositor_repick (compositor=0x619960) at compositor.c:382
3 0x0000000000406ac8 in destroy_surface (resource=0x6fc6f0) at compositor.c:397
4 0x00007ffff7bd33d8 in destroy_resource (element=0x6fc6f0, data=0x7fffffffd9fc) at wayland-server.c:355
5 0x00007ffff7bd8d98 in for_each_helper (entries=0x757808, func=0x7ffff7bd332c <destroy_resource>, data=0x7fffffffd9fc)
at wayland-util.c:264
6 0x00007ffff7bd8dd4 in wl_map_for_each (map=0x757808, func=0x7ffff7bd332c <destroy_resource>, data=0x7fffffffd9fc)
at wayland-util.c:270
7 0x00007ffff7bd34dc in wl_client_destroy (client=0x7577d0) at wayland-server.c:385
8 0x00007ffff7bd2e36 in wl_client_connection_data (fd=17, mask=1, data=0x7577d0) at wayland-server.c:187
9 0x00007ffff7bd5bde in wl_event_source_fd_dispatch (source=0x74cda0, ep=0x7fffffffdae0) at event-loop.c:76
10 0x00007ffff7bd665b in wl_event_loop_dispatch (loop=0x618900, timeout=-1) at event-loop.c:462
11 0x00007ffff7bd42a9 in wl_display_run (display=0x6188b0) at wayland-server.c:785
12 0x000000000040b1e1 in main (argc=1, argv=0x7fffffffdef8) at compositor.c:2182
Modify popup_grab_focus() to deal with a NULL surface.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
When we destroy a surface, we damage the surface below so that the area
exposed by the disappearing surface will be repainted. However, if that
surface also is destroyed, the damage information is lost and we fail to
repaint that area.
This commit introduces weston_surface_flush_damage(), which flushes the
surface damage the the surface below when a surface is destroyed. When
multiple surfaces are destroyed at the same time, the damage now accumulates
and sinks down through the surface stack as it should.
gbm_bo_create_from_egl_image() should catch this based on the
GBM_BO_USE_CURSOR_64X64 flag. It currently doesn't so we end up with
a cursor buffer with invalid stride.
If we don't cancel the repaint, we end up pointlessly redrawing the output.
What's worse is that pageflipping to the new buffer eventually fails and
we miss the finish_frame callback, leaving the compositor stuck when we
re-enter the vt.
Normally the repaint will trigger a pageflip, which flips back to our
fb, but that doesn't work if the kms output has been turned off or
set to a different mode.
If the desktop-shell client goes away for any reason, respawn it. To
avoid harmful looping, limit the respawning to 5 times within 30
seconds, and then give up.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
This is typically when launcing from a pty such as an X (or Wayland)
terminal or from an ssh session. Opening a new vt typically requires root
priviledges, so weston must be setuid root or laucnhed as root for this
to work.
We can only set up once we've acquired the VT and we shouldn't release the
VT until we've cleaned up. Before we would release the VT first, and then
race to drop drm master as X tried to get drm master. Which would kill X.
Part of the point of KD_GRAPHICS mode is that the kernel doesn't try
to restore the VT contents when we switch bach, but leaves that
to the user mode process. This avoids ugly flicker of text mode contents
before the compositor takes over.
When we later upload the cursor image with glTexImage2D(), that will unbind
the image just fine. No need for a NULL upload. Except that that doesn't
currently happen with mesa drivers, but the NULL upload is redundant either
way.
This lands the basic behavior of the popup surface type, but there are still
a number of details to be worked out. Mainly there's a hardcoded timeout
to handle the case of releasing the popup button outside any of the
client windows, which triggers popup_end if it happens after the timeout.
Maybe we just need to add that as an argument, or we could add a new event
that fires in this case to let the client decide whether it ends the popup
or not.
Usually there should be at least one input device, when Weston starts
up, or is reactivated by a VT switch. Add a nice warning, in case there
are no input devices.
This is to give a clue to users who happen to try Weston on DRM, and
do not get any response.
Add also a message to another failure case, that may lead to missing
input devices.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Weston initialises to faded-out state, which means all outputs are just
black, even if they render fine.
Previously the fade-in was triggered probably by some random input
event, since Weston was not guaranteed to wake up. Especially with the
drm backend, and the usual problem of not having permissions to input
devices, Weston would not fade in at all and appear broken.
Force Weston to fade in right after initialisation. This show that at
least rendering works, if it does not respond to any input.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Kristian Høgsberg
Benjamin Franzke
Tiago Vignatti
Pekka Paalanen
Olivier Le Thanh Duong
Rob Bradford