Follow-up from commit 'desktop-shell: don't run fade animation if
compositor is inactive' where the reference was dropped directly,
instead of using weston_surface_destroy().
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
When a window is closed, Weston will, by default, run a fade out animation and
defer destroying the underlying surface until it completes. However, if the
compositor is sleeping, and therefore not rendering any frames, this animation
will *never* complete. Therefore, if windows are repeatedly created and
destroyed while in sleep mode, these surfaces will keep accumulating, and since
the buffers attached to them may be backed by an fd, eventually the ulimit will
be reached resulting in a potential crash or other errors.
This can be demonstrated repeatedly launching and killing an X11 application
with Xwayland running.
while true; do xterm & pid=$!; sleep 0.5; kill $pid; done
As soon as the compositor goes to sleep, one can observe a steadily growing
list of dmabufs in the output of lsof.
As a fix, desktop_surface_removed should check whether the compositor is active
before kicking off the fade animation. If it is not, it should instead drop the
extra reference taken in desktop_surface_committed and then destroy the surface
immediately.
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
This fixes the following ASan detected leaks:
Direct leak of 88 byte(s) in 1 object(s) allocated from:
#0 0x7f8c3455f330 in __interceptor_malloc (/lib/x86_64-linux-gnu/libasan.so.5+0xe9330)
#1 0x7f8c33c60906 in wl_event_loop_add_timer ../../git/wayland/src/event-loop.c:571
#2 0x7f8c2ff98f46 in shell_fade_init ../../git/weston/desktop-shell/shell.c:4211
#3 0x7f8c2ff9e1da in wet_shell_init ../../git/weston/desktop-shell/shell.c:5266
#4 0x7f8c3443ede5 in wet_load_shell ../../git/weston/compositor/main.c:956
#5 0x7f8c3444fdb9 in wet_main ../../git/weston/compositor/main.c:3434
#6 0x55878ad3bfc6 in execute_compositor ../../git/weston/tests/weston-test-fixture-compositor.c:432
#7 0x55878ad3f9fa in weston_test_harness_execute_as_client ../../git/weston/tests/weston-test-runner.c:528
#8 0x55878ad2fbd6 in fixture_setup ../../git/weston/tests/viewporter-test.c:46
#9 0x55878ad2fc58 in fixture_setup_run_ ../../git/weston/tests/viewporter-test.c:48
#10 0x55878ad3ffaf in main ../../git/weston/tests/weston-test-runner.c:661
#11 0x7f8c340b409a in __libc_start_main ../csu/libc-start.c:308
#12 0x55878ad2f769 in _start (/home/pq/build/weston-meson/tests/test-viewporter+0xc769)
Indirect leak of 856 byte(s) in 1 object(s) allocated from:
#0 0x7f8c3455f518 in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0xe9518)
#1 0x7f8c33c99b73 in zalloc ../../git/weston/include/libweston/zalloc.h:38
#2 0x7f8c33c9cfb1 in weston_surface_create ../../git/weston/libweston/compositor.c:574
#3 0x7f8c2ff98230 in shell_fade_create_surface_for_output ../../git/weston/desktop-shell/shell.c:4059
#4 0x7f8c2ff98df6 in shell_fade_init ../../git/weston/desktop-shell/shell.c:4202
#5 0x7f8c2ff9e1da in wet_shell_init ../../git/weston/desktop-shell/shell.c:5266
#6 0x7f8c3443ede5 in wet_load_shell ../../git/weston/compositor/main.c:956
#7 0x7f8c3444fdb9 in wet_main ../../git/weston/compositor/main.c:3434
#8 0x55878ad3bfc6 in execute_compositor ../../git/weston/tests/weston-test-fixture-compositor.c:432
#9 0x55878ad3f9fa in weston_test_harness_execute_as_client ../../git/weston/tests/weston-test-runner.c:528
#10 0x55878ad2fbd6 in fixture_setup ../../git/weston/tests/viewporter-test.c:46
#11 0x55878ad2fc58 in fixture_setup_run_ ../../git/weston/tests/viewporter-test.c:48
#12 0x55878ad3ffaf in main ../../git/weston/tests/weston-test-runner.c:661
#13 0x7f8c340b409a in __libc_start_main ../csu/libc-start.c:308
#14 0x55878ad2f769 in _start (/home/pq/build/weston-meson/tests/test-viewporter+0xc769)
Indirect leak of 608 byte(s) in 1 object(s) allocated from:
#0 0x7f8c3455f518 in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0xe9518)
#1 0x7f8c33c99b73 in zalloc ../../git/weston/include/libweston/zalloc.h:38
#2 0x7f8c33c9bed5 in weston_view_create ../../git/weston/libweston/compositor.c:365
#3 0x7f8c2ff98251 in shell_fade_create_surface_for_output ../../git/weston/desktop-shell/shell.c:4063
#4 0x7f8c2ff98df6 in shell_fade_init ../../git/weston/desktop-shell/shell.c:4202
#5 0x7f8c2ff9e1da in wet_shell_init ../../git/weston/desktop-shell/shell.c:5266
#6 0x7f8c3443ede5 in wet_load_shell ../../git/weston/compositor/main.c:956
#7 0x7f8c3444fdb9 in wet_main ../../git/weston/compositor/main.c:3434
#8 0x55878ad3bfc6 in execute_compositor ../../git/weston/tests/weston-test-fixture-compositor.c:432
#9 0x55878ad3f9fa in weston_test_harness_execute_as_client ../../git/weston/tests/weston-test-runner.c:528
#10 0x55878ad2fbd6 in fixture_setup ../../git/weston/tests/viewporter-test.c:46
#11 0x55878ad2fc58 in fixture_setup_run_ ../../git/weston/tests/viewporter-test.c:48
#12 0x55878ad3ffaf in main ../../git/weston/tests/weston-test-runner.c:661
#13 0x7f8c340b409a in __libc_start_main ../csu/libc-start.c:308
#14 0x55878ad2f769 in _start (/home/pq/build/weston-meson/tests/test-viewporter+0xc769)
They were found with:
ASAN_OPTIONS=fast_unwind_on_malloc=0,malloc_context_size=50 \
LSAN_OPTIONS=suppressions=/home/pq/git/weston/.gitlab-ci/leak-sanitizer.supp \
./tests/test-viewporter test_viewporter_double_create
Turns out shell_destroy() had an open-coded and outdated copy of the
tear-down sequence, so fixing the leaks in only handle_output_destroy()
was not enough.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Most other places call a variable like this 'shell_output', so let's do
that here too. The old name was really confusing.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Plugs ASan reported leaks:
Direct leak of 88 byte(s) in 1 object(s) allocated from:
#0 0x7f338f70a518 in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0xe9518)
#1 0x7f338afe22f3 in zalloc ../../git/weston/include/libweston/zalloc.h:38
#2 0x7f338afe3cc2 in weston_desktop_xwayland_init ../../git/weston/libweston-desktop/xwayland.c:410
#3 0x7f338afdbaef in weston_desktop_create ../../git/weston/libweston-desktop/libweston-desktop.c:87
#4 0x7f338b148d39 in wet_shell_init ../../git/weston/desktop-shell/shell.c:5224
#5 0x7f338f5e9de5 in wet_load_shell ../../git/weston/compositor/main.c:956
#6 0x7f338f5fadb9 in wet_main ../../git/weston/compositor/main.c:3434
#7 0x5646d2392fc6 in execute_compositor ../../git/weston/tests/weston-test-fixture-compositor.c:432
#8 0x5646d23969fa in weston_test_harness_execute_as_client ../../git/weston/tests/weston-test-runner.c:528
#9 0x5646d2386bd6 in fixture_setup ../../git/weston/tests/viewporter-test.c:46
#10 0x5646d2386c58 in fixture_setup_run_ ../../git/weston/tests/viewporter-test.c:48
#11 0x5646d2396faf in main ../../git/weston/tests/weston-test-runner.c:661
#12 0x7f338f25f09a in __libc_start_main ../csu/libc-start.c:308
#13 0x5646d2386769 in _start (/home/pq/build/weston-meson/tests/test-viewporter+0xc769)
Indirect leak of 152 byte(s) in 1 object(s) allocated from:
#0 0x7f338f70a518 in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0xe9518)
#1 0x7f338afdb811 in zalloc ../../git/weston/include/libweston/zalloc.h:38
#2 0x7f338afdb92d in weston_desktop_create ../../git/weston/libweston-desktop/libweston-desktop.c:65
#3 0x7f338b148d39 in wet_shell_init ../../git/weston/desktop-shell/shell.c:5224
#4 0x7f338f5e9de5 in wet_load_shell ../../git/weston/compositor/main.c:956
#5 0x7f338f5fadb9 in wet_main ../../git/weston/compositor/main.c:3434
#6 0x5646d2392fc6 in execute_compositor ../../git/weston/tests/weston-test-fixture-compositor.c:432
#7 0x5646d23969fa in weston_test_harness_execute_as_client ../../git/weston/tests/weston-test-runner.c:528
#8 0x5646d2386bd6 in fixture_setup ../../git/weston/tests/viewporter-test.c:46
#9 0x5646d2386c58 in fixture_setup_run_ ../../git/weston/tests/viewporter-test.c:48
#10 0x5646d2396faf in main ../../git/weston/tests/weston-test-runner.c:661
#11 0x7f338f25f09a in __libc_start_main ../csu/libc-start.c:308
#12 0x5646d2386769 in _start (/home/pq/build/weston-meson/tests/test-viewporter+0xc769)
Indirect leak of 72 byte(s) in 1 object(s) allocated from:
#0 0x7f338f70a518 in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0xe9518)
#1 0x7f338afdc5ae in zalloc ../../git/weston/include/libweston/zalloc.h:38
#2 0x7f338afdc89e in weston_desktop_client_create ../../git/weston/libweston-desktop/client.c:108
#3 0x7f338afe3d2a in weston_desktop_xwayland_init ../../git/weston/libweston-desktop/xwayland.c:415
#4 0x7f338afdbaef in weston_desktop_create ../../git/weston/libweston-desktop/libweston-desktop.c:87
#5 0x7f338b148d39 in wet_shell_init ../../git/weston/desktop-shell/shell.c:5224
#6 0x7f338f5e9de5 in wet_load_shell ../../git/weston/compositor/main.c:956
#7 0x7f338f5fadb9 in wet_main ../../git/weston/compositor/main.c:3434
#8 0x5646d2392fc6 in execute_compositor ../../git/weston/tests/weston-test-fixture-compositor.c:432
#9 0x5646d23969fa in weston_test_harness_execute_as_client ../../git/weston/tests/weston-test-runner.c:528
#10 0x5646d2386bd6 in fixture_setup ../../git/weston/tests/viewporter-test.c:46
#11 0x5646d2386c58 in fixture_setup_run_ ../../git/weston/tests/viewporter-test.c:48
#12 0x5646d2396faf in main ../../git/weston/tests/weston-test-runner.c:661
#13 0x7f338f25f09a in __libc_start_main ../csu/libc-start.c:308
#14 0x5646d2386769 in _start (/home/pq/build/weston-meson/tests/test-viewporter+0xc769)
Oops.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This ensures the layers are torn down properly.
See commit: libweston: add weston_layer_fini()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
After some changes in the exposay layout, the outer padding makes
no sense anymore. It was used to avoid the panel to get overlapped
by the exposay surfaces and to keep distance from the borders
of the window.
Currently, the exposay is centralized and the panel cannot get
overlapped. The outer padding just creates unnecessary unused
space, what makes exposay's surfaces smaller.
Delete outer padding from struct exposay_output.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
The exposay grid is square, but we don't always have enough surfaces
to fill all the columns of the last row. The code to centralize
the surfaces of the last row is not working.
Fix the code that centralizes the surfaces in the last row, making
it more visually pleasant.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Commit "exposay: add margins to centralize exposay" has centralized
the whole exposay, but that's not enough. The internal surfaces of
exposay are not centralized.
Each internal surface of exposay is a square, but most of the windows
are rectangular. Add margin to centralize exposay's surfaces in their
own square.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
The exposay is being rendered in the top-left corner of the
screen. Add margins to render it in the center, making it
more visually pleasant.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
We've been using an inner border of fixed size (80px), but this
is dangerous. If you have too many open applications or a small
window, the surface size computed will be negative, crashing
the exposay: "error: weston_view transformation not invertible".
Also, it creates a lot of unnecessary space, making the exposay
unusable when we have a small window or many applications open.
Make inner border to be 10% of surface size and surface size to
be 90% of its original size, avoiding the crashes and making it
more visually pleasant.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Commit "desktop-shell: make get_output_work_area() global" allowed
the usage of get_output_work_area() in exposay. This is necessary to
avoid overlapping the panel when rendering exposay's surfaces.
Use get_output_work_area() to not take into account the panel size,
instead of considering that the whole screen is available to
render exposay's surfaces.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
get_output_work_area() can be used by exposay to know the free space
where it can render its surfaces, what avoids overlapping the panel.
Currently this function is declared as static in
desktop-shell/shell.c, so it cannot be used by exposay.
Remove static from get_output_work_area() and add it to shell.h
so it can be used by exposay as well.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
In exposay_layout(), int pad is being calculated within the
loop. This is unnecessary, as its value is constant. Move it
out of the loop.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
As in some circumstances there could be no output connected, avoid
retrieving the width/height of the output if none was found/connected.
Fixes: #384
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The cms-static, desktop-shell, hmi-controller, ivi-shell, and screen-share
modules use symbols from libexec_weston, e.g.:
$ ldd /usr/lib/x86_64-linux-gnu/weston/desktop-shell.so | grep "not found"
libexec_weston.so.0 => not found
Loading these modules from weston happens to work because the weston executable
itself links against libexec_weston, and has an rpath set. Still, these modules
depend on a library in a non-standard location. Adding an rpath could help
static checkers to make sure all shared objects' dependencies are present.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Introduced with a8da2084, it seems that there are cases when there's no
parent available (zenity, for instance).
Removes any potential child and re-initialize it, in case the parent is
not set. (Simon Ser)
Fixes: #340
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reported-by: n3rdopolis <bluescreenavenger@gmail.com>
If a xdg_toplevel surface has a child (or multiple), the desktop shell
still allows to activate the parent. This can be problematic with
modal dialogs such as message boxes which then are hidden behind the
main window, which might be non-responsive to inputs at this this
point.
The protocol specifies set_parent as follows: "Set the 'parent' of
this surface. This surface should be stacked above the parent surface
and all other ancestor surfaces."
Track parent/child relationship in desktop-shell. Follow the protocol
recommendation and make sure the child stays stacked above the parent.
Fixes: #231
Signed-off-by: Stefan Agner <stefan@agner.ch>
Wayland innovated a lot of cool things, but non-binary boolean values is
the great advances of our time.
Make config_parser_get_bool() work on boolean values, and switch all its
users.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This introduces a new convention of checking through the compositor destroy
listener if the plugin is already initialized. If the plugin is already
initialized, then the plugin entry function succeeds as a no-op. This makes it
safe to load the same plugin multiple times in a running compositor.
Currently module loading functions return failure if a plugin is already
loaded, but that will change in the future. Therefore we need this other method
of ensuring we do not double-initialize a plugin which would lead to list
corruptions the very least.
All plugins are converted to use the new helper, except:
- those that do not have a destroy listener already, and
- hmi-controller which does the same open-coded as the common code pattern
did not fit there.
Plugins should always have a compositor destroy listener registered since they
very least allocate a struct to hold their data. Hence omissions are
highlighted in code.
Backends do not need this because weston_compositor_load_backend() already
protects against double-init. GL-renderer does not export a standard module
init function so cannot be initialized the usual way and therefore is not
vulnerable to double-init.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
All these plugins use symbols that were exported by the weston executable and
are now exported by libexec-weston.so. Linking these to libexec-weston.so fixes
unresolved symbols.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
In the future libweston will stop providing it for its users, since it's not
part of libweston API.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We have two kinds of libweston users: internal and external. Weston, the
frontend, counts as an external user, and should not have access to libweston
private headers. The shell plugins are external users as well, because we
intend people to be able to write them. Renderers, backends, and some plugins
are internal users who will need access to private headers.
Create two different Meson dependency objects, one for each kind.
This makes it less likely to accidentally use a private header.
Screen-share is a Weston plugin and therefore counts as an external user, but
it needs the backend API to deliver input. Until we are comfortable exposing
public API for that purpose, let it use internal headers.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Define common_inc which includes both public_inc and the project root directory.
The project root directory will allow access to config.h and all the shared/
headers.
Replacing all custom '.', '..', '../..', '../shared' etc. include paths with
common_inc reduces clutter in the target definitions and enforces the common
#include directive style, as e.g. including shared/ headers without the
subdirectory name no longer works.
Unfortunately this does not prevent one from using private libweston headers
with the usual include pattern for public headers.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Do not build matrix.c into the shell plugins. The matrix functions are exported
by libweston.so and the shell plugins links to it.
Found by inspection.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
When hotunplugging a display, the compositor will tear down the
corresponding output object.
Avoid NULL output dereferences by all surface label getters in
desktop-shell when hotunplugging happens.
Signed-off-by: Miguel A Vico Moya <mvicomoya@nvidia.com>
When Fading out a destroyed surface view finishes, the view is rendered
with very little alpha. After that, since the output isn't updated
unless a event on the output doesn't occurs, the view is still on the
output. By unmapping the view, the output repaint scheduled without the
surface.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
When the last output is destroyed or when a new output is created after
the last output is destroyed, we need to re-position the views to ensure
that all the views are displayed on the output.
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/210
Signed-off-by: Harish Krupo <harishkrupo@gmail.com>
This too is a public installed header.
The public headers are moved under a new top-level directory include/ to make
them clearly stand out as special (public API).
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
It is a public installed header used by libweston.h.
See "Rename compositor.h to libweston/libweston.h" for rationale.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The main idea is to make libweston users use the form
#include <libweston/libweston.h>
instead of the plain
#include <compositor.h>
which is prone to name conflicts. This is reflected both in the installed
files, and the internal header search paths so that Weston would use the exact
same form as an external project using libweston would.
The public headers are moved under a new top-level directory include/ to make
them clearly stand out as special (public API).
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
A surface can get destroyed while a shell grab is active, which can
for example happen if the command running in weston-terminal exits.
When a surface gets destroyed, grab->shsurf is reset to NULL by
destroy_shell_grab_shsurf(), but otherwise the grab remains active and
its callbacks continue to be called. Thus, dereferencing grab->shsurf
in a callback without checking it for NULL first can lead to undefined
behavior, including crashes.
Several functions were already properly checking grab->shsurf for NULL,
move_grab_motion() being one example. Others, however, were not, which
is what this commit fixes.
Related to https://gitlab.freedesktop.org/wayland/weston/issues/192
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Changing the focused surface did remove the surface_destroy_listener from the wl_signal list,
but destroying the focus state did not. As a result, sometimes the same listener would be added
to two surfaces, which would join their wl_signal lists together, which would cause infinite
loops and use-after-frees when closing desktop surfaces.
This crash was happening when *releasing* a pointer button on a window
that was being resized and got destroyed during the grab.
[@daniels: Cosmetic fixes; apply same fix to grab cancel.]
Use the proper weston_compositor_exit API instead of wl_display_terminate() to
allow the compositor main to prepare for exit, and most importantly to set the
exit error code as appropriate.
I have some brokenness in my test suite running, and weston-desktop-shell was
crashing at start, yet the tests did not notice. With this patch, the tests
where the helper crashes are properly marked as failed.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Avoid crashes related to get_shell_surface returning NULL.
Surfaces are already allowed to be neither focus nor shell in
e.g. focus_state_surface_destroy.
This allows to possibility to specify where to look for the executable
but also simplifies the need of having to pass either BINDIR/LIBEXECDIR
for retrieving full-path of the executable.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
Meson is a build system, currently implemented in Python, with multiple
output backends, including Ninja and Make. The build file syntax is
clean and easy to read unlike autotools. In practise, configuring and
building with Meson and Ninja has been observed to be much faster than
with autotools. Also cross-building support is excellent.
More information at http://mesonbuild.com
Since moving to Meson requires some changes from users in any case, we
took this opportunity to revamp build options. Most of the build options
still exist, some have changed names or more, and a few have been
dropped. The option to choose the Cairo flavour is not implemented since
for the longest time the Cairo image backend has been the only
recommended one.
This Meson build should be fully functional and it installs everything
an all-enabled autotools build does. Installed pkg-config files have
some minor differences that should be insignificant. Building of some
developer documentation that was never installed with autotools is
missing.
It is expected that the autotools build system will be removed soon
after the next Weston release.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Pekka Paalanen <pq@iki.fi>
During de-init ensure removal of added signals from list. Otherwise
a dongling pointer is left behind which will affect other plugins.
Signed-off-by: Harsha M M <harsha.manjulamallikarjun@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Collect the fallback definitions of static_assert() from desktop-shell
and the test shell, and move them to helpers.h. This allows code
throughout the tree to use static_assert() for build-time assertions,
where it is supported by the compiler.
As GCC goes out of its way to only add static_assert() when C11 has been
explicitly requested - which we don't do - make sure to use the more
widely available _Static_assert() if that is provided.
This will be used in future patches to ensure two array lengths don't go
out of sync.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Rather than having a hardcoded dependency on the build-directory layout,
use an explicit module-map environment variable, which rewrites requests
for modules and helper/libexec binaries to specific paths.
Pekka: This will help with migration to Meson where setting up the paths
according to autotools would be painful and unnecessary.
Emre: This should also help setting up the test suite after a
cross-compile.
Pekka: A caveat here is that this patch makes it slightly easier to load
external backends by abusing the module map. External backends are
specifically not supported in libweston.
Signed-off-by: Daniel Stone <daniels@collabora.com>
v2:
Fixed ivi_layout-test-plugin.c:wet_module_init().
Do not change the lookup name of ivi-layout.ivi.
Improved documentation of weston_module_path_from_env() and made it cope
with map strings that a) do not end with a semicolon, and b) have
multiple consecutive semicolons.
Let WESTON_MODULE_MAP be printed into the test log so that it is easier
to run tests manually.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Suggested by Emil: Use a variable for strlen(name).
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Running 'weston-simple-egl -f -b' (fullscreen, unthrottled) caused a
crash in shell_ensure_fullscreen_black_view() due to
shsurf->fullscreen_output being NULL. Also shell_configure_fullscreen()
could crash on that condition.
Fix shell_configure_fullscreen() to bail out with minimal work if there
is no fullscreen_output.
It is unclear if anything will cause a reconfiguration when an output is
plugged in.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
In activate, do not call lower_fullscreen_layer() at all if the output
is NULL. It should not do anything in that case, per the existing
comment.
This is a tentative crash fix for a case where there are no enabled
weston_outputs at all.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
This is a tentative crash fix for a case where there are no enabled
weston_outputs at all.
If no output is given, just put the surface at 0,0. At least it should
become mostly visible if an output is plugged in, if not centered.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
This is a tentative crash fix for a case where there are no
enabled weston_outputs at all.
Let get_output_work_area() return a zero area if the given output is
NULL. If there is no output, there is no area. Unfortunately we cannot
return "no position" but have to use 0,0 instead.
In send_configure_for_surface(), this causes a maximized surface to
receive width=0 and height=0 in the configure event, which means the
client is free to choose the size. There is no correct size to send for
maximizing for no output.
In constrain_position(), this has no effect. The interactive move of a
surface is restricted to not go below the panel, so even if a user
managed to move a surface without an output, it just prevents the
surface moving beyond y=0.
In weston_view_set_initial_position(), get_output_work_area() will not
be called with NULL output anyway.
In set_maximized_position(), this makes it behave as if the output was
at 0,0 which is the default position of the first output.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Marius Vlad
Emmanuel Gil Peyrot
Erik Kurzinger
Pekka Paalanen
Leandro Ribeiro
ganjing
Philipp Zabel
Stefan Agner
Daniel Stone
Miguel A. Vico
Tomohito Esaki
Harish Krupo
Sergey Bugaev
Greg V
Marius Vlad
Harsha M M
Pekka Paalanen