Currently the screen sharing has to be manually started after weston has
started by pressing Ctrl+Alt+S on a keyboard. Add new bool config option
to the screen-share section which permits starting the screen sharing of
all outputs on weston start up. This is useful e.g. for doing screen
mirroring between two devices over network.
Signed-off-by: Marek Vasut <marex@denx.de>
build path ends in the final binary package causing the
build not to be reproducible byte-by-byte.
Reference:
https://bugs.debian.org/899358
Signed-off-by: Héctor Orón Martínez <zumbi@debian.org>
This is so that, for instance, people using weston as their main Wayland
compositor can invert the sense of two finger scrolling or change
pointer acceleration using weston.ini, rather than having to edit C
code.
All of the options that libinput itself exposes through its API are now
exposed in weston.ini. The new options are called `tap-and-drag`,
`tap-and-drag-lock`, `disable-while-typing`, `middle-emulation`,
`left-handed`, `rotation`, `accel-profile`, `accel-speed`,
`scroll-method`, `natural-scroll`, and `scroll-button`. I have
successfully tested everything except for `rotation`, out of a lack of
hardware support.
weston now depends directly on libevdev for turning button name strings into
kernel input codes. This was needed for the `scroll-button` config
option. (weston already depends indirectly on libevdev through
libinput, so I figured people would be OK with this.) As a practical
matter for debian-style packagers, weston now has a build dependency on
libevdev-dev.
Right now, the code applies the same options to all attached devices
that a given option is relevant for. There are plans for multiple
[libinput] sections, each with different device filters, for users who
need more control here.
Signed-off-by: Eric Toombs <3672-ewtoombs@users.noreply.gitlab.freedesktop.org>
This is to increase consistency in config option naming in weston.ini.
(Prefer hyphens over underscores to separate words.)
If enable_tap is present in weston.ini, an obnoxious error message is
logged with weston_log(). In terms of configuration, if enable-tap is
present, enable_tap is ignored.
Signed-off-by: Eric Toombs <3672-ewtoombs@users.noreply.gitlab.freedesktop.org>
As an option, allow to specify a mode (from the configuration file) by
its refresh rate.
Example of valid syntax:
- "mode=1920x1080" Select a 1920x1080 mode, refresh rate undefined.
- "mode=1920x1080@60" Select the (or one of the) 1920x1080 60 Hz mode.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
As it has been discussed in the past [1], running Weston
without any input device at launch might be beneficial for
some use cases.
Certainly, it's best for the vast majority of users (and
the project) to require an input device to be present, as
to avoid frustration and hassle, but for those brave souls
that so prefer, this patch lets them run without any input
device at all.
This introduces a simple configuration in weston.ini:
[core]
require-input=true
True is the default, so no behavioral change is introduced.
[1] https://lists.freedesktop.org/archives/wayland-devel/2015-November/025193.html
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This patch enhances the panel clock by adding a config file
option which can be used to either disable the clock or make
it also show seconds in the current clock format.
v2: Implement suggestions from Pekka:
- Include Signed-off-by
- Coding style fixes
- Implement clock widget allocation by using
width from cairo_text_extents
- Highlight config option values in man page
v3: Implement suggestions from Pekka and Bryce:
- Use CLOCK_FORMAT_* instead of FORMAT_* in the enum
- Switch to using fixed clock widget size instead
of one returned from cairo_text_extents
- Fixes to config option highlighting in the man page
v4: Implement more suggestions from Pekka and Bryce:
- Improve patch changelog
- Move the check for CLOCK_FORMAT_NONE into the
caller function
- Fix a memory leak in panel_create introduced by
previous revision of this patch
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57583
Signed-off-by: Armin Krezović <armin.krezovic@fet.ba>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This is a follow-up for the patch that removed weston-screensaver. The
aim is to clean up shell.c a little by removing non-essential
components. Vanilla Weston desktop is only a demo, external projects are
encouraged to create user-friendly desktop environments.
The support for launching a screensaver client and the protocol bindings
are removed. With them, all related configuration options are removed,
and the manuals are updated accordingly.
The screensaver protocol definition is left in desktop-shell.xml for
posterity.
This does not affect Weston's or desktop-shells ability to put screens
to sleep after inactivity. The inactivity timer continues to operate as
before. Also screen locking is unaffected.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Enable by adding the following to your weston.ini:
[libinput]
enable_tap=true
This also makes weston require libinput >= 0.5.0.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
I've updated this based on comments, simplifying the command handling.
Currently the screen-share module uses a hard-coded command to start the
fullscreen shell server. This patch causes the module to read the command from
the weston config file (from the "command" key in the "screen-share" section).
The default value remains the same (i.e. to run weston with the RDP backend and
fullscreen shell), but is now located in the weston config file.
As well as allowing the arguments to the fullscreen shell server to be changed,
this also permits an alternative fullscreen shell server to be used if required,
without needing to recompile. Since the command is run as the user running
weston, this should not pose any additional security risk.
Signed-off-by: Andrew Wedgbury <andrew.wedgbury@realvnc.com>
It turns out that flipped-270 is the second-simplest transformation besides
normal because it is a direct swapping of the x and y axes. Having that as
the default encourages people to use flipped-270 as the default test for "I
want to try this with a transform". Unfortunately, because flipped-270 is
so simple, it is really easy to have something that works for normal,
flipped-270, and nothing else. This encourages people to test with a
transform thats actually "hard".
Previously weston.ini had hardcoded paths for the weston-* clients in
/usr/bin and /usr/libexec. This was a bit annoying when testing Weston
because you wouldn't usually install those in the system prefix. This
patch adds a make rule to automatically generate weston.ini from a
template file with some replacement markers for the paths so that they
can have the right prefix.
This patch adds a new weston.ini key, gbm-format, to the [core] section.
This new key can be rgb565, xrgb8888 or xrgb2101010, and makes the
compositor use the corresponding GBM format for the framebuffer.
The new key startup-animation in the [shell] section lets you
control the startup animation. Default is fade, but with this patch
we can also do none, which just show the desktop as fast as possible.
This patch adds 3 new options to weston.ini to allow
the user to change default constant_accel_factor,
min_accel_factor and max_accel_factor. If no options
are set, it falls back using defaults as it did before.
v2: create weston_config_section_get_double and use it
instead of manualy converting string to double.
v3: add default values in weston_config_get_double
instead of using conditionals.
v4: don't pass diagonal as pointer.
This allows users to change the assigned display profile in GNOME (using
gnome-control-center) or KDE (using colord-kde) and also allows the profiling
tools to correctly inhibit the calibration state whilst measuring the native
screen response.
Since a6813d288, there is no longer a "type" key in the [shell] config section.
Instead the code accepts a [core] section with a modules key, containing a
comma separated list of modules to load. This patch removes the type keys
and adds a core section in the example weston.ini config file.
This patch allows rotation and mirroring outputs for x11 and drm backends.
A new 'transform' key can be set in the [output] section. From the protocol:
"The flipped values correspond to an initial flip around a vertical axis
followed by rotation."
The transform key can be one of the following 8 strings:
normal
90
180
270
flipped
flipped-90
flipped-180
flipped-270
This patch provides a way to define outputs for the x11 backend. It
parses [output] sections and checks for 'name' and 'mode' keys. The
'name' must start with an 'X' to distinguish from drm output names.
Command line options --width and --height supersede what is in the
config file. When --output-count is passed, the number of outputs
are limited or additional outputs added with default values.
Parse the config file for [output] sections and check for 'name'
and 'mode' keys. The key strings are compared to what is reported
by weston log. The 'mode' key string can be one of the following:
1) WIDTHxHEIGHT - one that is reported by weston log
2) off - Disables the output
3) preferred - Uses the preferred mode
4) current - Uses the mode currently driving the crtc
This patch makes the main modifier configurable. We used to hardcode super
(windows key) for most bindings, but now that can be changed.
The change affects two key bindings: rotation moves to mod+right click
and backlight moves to from ctrl+f9/f10 to mod+f9/f10.
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
Move idle_time variable to struct wlsc_compositor, so that a shell
plugin can change it. Also store the original value from the command
line.
Add "duration" option to the desktop-shell screensaver config. This is
the time the screensaver will be visible, after idle timeout triggers
another time and blanks the screen.
Now you can have different delays to lock the screen, and switch off the
screen while a screensaver is running.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Read the same configuration file in the shell plugin (desktop-shell) as
the desktop-shell client does.
Add a new section "screensaver", where "path" defines the path of the
idle animation client to be executed. Not defining "path" disables the
animation.
Idle animations are not in use by default. It must be configured in
wayland-desktop-shell.ini or launched manually.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add an option to the desktop-shell ini file that defines whether screen
locking is used or not.
Useful for testing screensaver interactions without a lock surface.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
nerdopolis
Marek Vasut
Veeresh Kadasani
Héctor Orón Martínez
Eric Toombs
Quentin Glidic
Fabien Dessenne
Daniel Díaz
Armin Krezović
Bill Spitzak
Pekka Paalanen
Jonas Ådahl
Andrew Wedgbury
Jason Ekstrand
Jasper St. Pierre
Neil Roberts
Kristian Høgsberg
Emilio Pozuelo Monfort
Jason Ekstrand
Armin K
Richard Hughes
Emilio Pozuelo Monfort
Scott Moreau
Jan Arne Petersen
Juan Zhao
Tiago Vignatti
Pekka Paalanen