The DRM backend uses changes in the cursor view memory address and
surface damage to detect when it needs to re-upload to a cursor plane
framebuffer.
However, when a cursor view is destroyed and then recreated, e.g., when
the pointer cursor surface is updated, the newly created view may have
the same memory address as the just destroyed one. If no new cursor
buffer is provided (because it was attached, committed and used
previously) when this address reuse occurs, then there also isn't any
updated surface damage and the backend doesn't update the cursor plane
framebuffer at all.
To fix this issue utilize the destroy signal to track when the cursor
view is destroyed, and clear the cached cursor_view value in drm_output.
After clearing the cached value, the next cursor view is always
considered new and thus uploaded to the plane properly.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Remove all the backend code to support drivers without universal planes.
From[1]:
"The code needed to support kernels where DRM does not support uiniversal
planes makes the DRM-backend a little more complicated, because it needs
to create fake planes for primary and cursor. The lifetimes of the fake
planes does not match the lifetime of "proper" planes, which is surprising."
And since the universal planes left the experimetal flag in 2014[2] it is
safe to remove the support now.
[1] https://gitlab.freedesktop.org/wayland/weston/-/issues/427
[2] https://cgit.freedesktop.org/drm/drm-tip/commit/?id=c7dbc6c9ae5c3baa3be755a228a349374d043b5b
Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
In commit "libweston: add struct weston_drm_format" struct
weston_drm_format and its helper functions were added to libweston.
Also, unit tests for this API have been added in commit "tests: add unit
tests for struct weston_drm_format".
Start to use this API in the DRM-backend, as it enhances the code by
avoiding repetition and ensuring correctness.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
Co-authored-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This header is for sharing fallback definitions for drm_fourcc.h. A new
test in tests/yuv-buffer-test.c is going to be needing XYUV8888 format,
and more new formats will be expected with HDR supports.
Share these fallback definitions in one place instead of copying them
all over.
All users of drm_fourcc.h are converted to include weston-drm-fourcc.h
instead for consistency: have the same definitions available everywhere.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
96bef0517e "drm-backend: add support for
writeback connectors" started using DRM_MODE_CONNECTOR_WRITEBACK and
DRM_CLIENT_CAP_WRITEBACK_CONNECTORS. These were introduced in libdrm
2.4.95.
According to
https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/311
Ubunut Xenial is the only mentioned distribution that does not provide a
libdrm new enough. I think that is fine to drop now, 2016 was a good
while ago.
Libdrm 2.4.95 also introduced DRM_CLIENT_CAP_ASPECT_RATIO,
DRM_MODE_PICTURE_ASPECT_64_27, DRM_MODE_PICTURE_ASPECT_256_135.
The fallback definitions for the above are dropped.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Recognize writeback connectors and add 'struct drm_writeback'
objects in order to store them.
These objects are created and stored in a list by the time
that DRM-backend is initialized. This list is updated if a
writeback connector dynamically appears or is disconnected.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
The function drm_connector_assign_connector_info() should
not be calling functions to handle drm_head, as connectors
and heads are not the same thing after patch "drm-backend:
move connector data from struct drm_head to struct drm_connector".
Move drm_head specific calls to drm_head_update_info(). This
is more in line with the hierarchy of the objects and also
allow us to drop drm_head pointer from drm_connector.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Instead of calling drmModeObjectGetProperties() each time that we need
the connector properties, it is better to keep a reference for it in
struct drm_connector. This reference is only updated when is necessary.
E.g. hotplug events.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This is the first step in order to add support for writeback
connector in Weston. We don't want writeback connectors data
to be stored in 'struct drm_head' objects, as these objects are
used to output content and we should not use writeback connectors
for this purpose.
The writeback connectors will be stored in a new 'struct
drm_writeback', but the connector data is common between
'struct drm_head' and 'struct drm_writeback'.
So move connector data from 'struct drm_head' to 'struct
drm_connector'. This helps to avoid code duplication and makes
the code clearer.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Now that we have a CRTC list in the DRM-backend, we can
iterate through it and look for the CRTCs that do not have
assigned outputs in order to find unused CRTCS.
So we can drop unused_crtcs from struct drm_backend and also
drop the functions drm_backend_update_unused_outputs() and
wl_array_remove_uint32().
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
There are no 'struct drm_output' for CRTCs that are not active.
Also, CRTC data lives in 'struct drm_output'. This is causing
us some trouble, as the DRM-backend needs to program those
unnactive CRTCs to be off.
If the DRM-backend had the reference for every CRTC (being
active or not), it would make certain functions (e.g.
drm_pending_state_apply_atomic()) more simple and efficient.
Move CRTC data from 'struct drm_output' to 'struct drm_crtc',
as this is the first step to allow the DRM-backend to have
references for every CRTC.
Also, add list of CRTCs to DRM-backend object. Now the
DRM-backend is responsible for allocating/deallocating the CRTC
objects. The outputs will only reference, init and fini the CRTCs
in this list.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Allow to disable GBM modifiers at runtime using the environment variable
WESTON_DISABLE_GBM_MODIFIERS.
This can be useful for debugging or when modifiers cause issues, e.g. in
case modifiers use higher memory bandwidth and hence impose a lower
resolution limit as it is the case with Intel Kaby Lake graphics.
Related to: https://gitlab.freedesktop.org/wayland/weston/-/issues/404
Signed-off-by: Stefan Agner <stefan@agner.ch>
This moves the creation of the blob to be earlier, to when the damage is
calculated. It replaces the damage tracked inside of the plane state
with the blob id itself.
This should stop creating new blob ids for TEST_ONLY commits, and them
being leaked in general, as the blob ids are now freed with the plane
state.
The FB_DAMAGE_CLIPS property is now always set if it's supported, and
will be 0 in the case that we have no damage information, which
signifies full damage to the kernel.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
The KMS 'panel orientation' property allows the driver to statically
declare a fixed rotation of an output device. Now that weston_head has a
transform member, plumb the KMS property through to weston_head so the
compositor can make a smarter choice out of the box.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[daniels: Extracted from one of Lucas's patches]
Signed-off-by: Daniel Stone <daniels@collabora.com>
The aspect ratio definitions for 64:27 and 256:135 have been added with
libdrm 2.4.95. However, Weston currently depends on libdrm 2.4.89 or
higher. Define the definitions in Weston to support libdrm older than
2.4.95.
Fixes: #332
Fixes: 6093772f45 ("backend-drm: Use aspect-ratio bit definitions from libdrm")
Signed-off-by: Stefan Agner <stefan@agner.ch>
When the aspect-ratio-aware mode support was added to Weston, it was
done before the libdrm support was finalised and merged. Between it
being added to Weston and being merged, it changed to no longer provide
the offset for the bitmask.
Instead of using the mask and a compatible enum, if we update our
libdrm dependency, we can use the flag definitions directly from libdrm.
In 94e4068ba1, the libdrm dependency was bumped to 2.4.83, which
enabled us to remove a bunch of error-prone ifdefs by making atomic and
modifier support mandatory.
We determined in the discussion of !311 that it was safe to push the
dependency as high as 2.4.91, as that was what was available in major
distributions.
Bumping to 2.4.86 allows us to safely remove the ifdef and go with
upstream flags, as that was added in mesa/drm@0d889201d106.
Signed-off-by: Daniel Stone <daniels@collabora.com>
In order to better optimize view assignment to HW planes, we construct
an intermediary zpos candidate list which is used aggregate all suitable
planes for handling scan-out capable client buffers.
We go over it twice: once to construct it and once to pick-and-choose a
suitable plane based its highest zpos position.
In order to maintain the view order correctly we track current zpos
value being applied to the plane state and use it when trying to place
a view into a plane.
Pass the computed zpos value to be applied to the plane state.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
Functional no change, as nobody makes use of it. Only apply the zpos
value if the zpos property is mutable (that is, zpos_max and zpos_min
are not the same).
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Due to an error in driving GitLab, this commit erroneously contained the
entirety of !267 (zpos support in the KMS backend) squashed into one
single commit, pushed into master.
In order to keep the history clean, this is being reverted; a rebased
version of !267 with the clear individual commits which were already
present will be applied in its place.
This reverts commit 95e3b0deae.
Make GBM optional in case GL renderer is disabled. This allows to
build Weston with DRM backend without Mesa dependencies.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Move DRM virtual support into a separate file. Use the remoting
compile time option to disable DRM virtual support since this is the
only user of DRM virtual support currently. This will make it easier
to build the DRM backend without GBM support.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Currently drm-layer supports HDCP1.4 using connector property:
Content Protection. This property if available for a platform, can be
read and set for requesting content-protection.
Also, the patch series [1] adds HDCP2.2 support in drm, and patch [2]
adds support to send udev events for change in connector properties,
made by the kernel.
This patch adds these HDCP connector properties in weston, and exposes
the content-protection support to the client for drm-backend.
It adds the enums to represent 'Content Protection' and 'Content Type'
connector properties exposed by drm layer. It adds a member
'protection' in drm_output_state, to store the desired protection
from the weston_output in the drm-backend output-repaint cycle. This
is then used to write the HDCP connector properties for the drm_heads
attached to the drm_output.
The kernel sends uevents to the user-space for any change made by it
in the "Content Protection" connector property. No event is sent in
case of change in the property made by the user-space.
It means, when there is a change of the property value from "DESIRED"
to "ENABLE" i.e. successful authentication by the kernel, a uevent
will be generated, but in case of userspace requesting for disabling
the protection by writing "UNDESIRED" into the property, no uevent
will be generated.
This patch also adds support for handling new udev events for HDCP
connector property changes. Any such change, triggers change in the
weston_head's current_protection.
[1] https://patchwork.freedesktop.org/series/57233/#rev7
[2] https://patchwork.freedesktop.org/patch/303903/?series=57233&rev=7
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Introduce a new private header file that only internal backends are
allowed to use. Starts by migrating functions that operate on the
'struct weston_head'.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Introduce a new private header file that only internal parts of the
library are allowed to use and shouldn't be exposed in the public header
of libweston.
Start by adding by adding functions that operate on the 'weston_buffer*'.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
drm_assign_planes() is called to separate views out and decide what will
be taken out for plane composition and what will be left for the
renderer to compose.
It calls drm_output_propose_state() in order to find a good
configuration, which itself has a number of helpers that it calls. Break
these out into a separate file.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Most of the state helpers (create, destroy, duplicate, etc) state, are
relatively straightforward and can live in a separate file.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a new file which handles most of the actual KMS API use. This
covers the property handling (in which we map between KMS properties and
our internal representations), as well as actually applying state
through atomic modesetting or the legacy SetCrtc/PageFlip/DPMS APIs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a new file for the DRM backend's handling of output modes, e.g.
resolution, aspect ratio, preferred mode selection, EDID parsing.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a new header called drm-internal.h, and move many of drm.c's
declarations and helpers to it.
This will allow us to split the DRM backend into multiple files.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Alexandros Frantzis
Igor Matheus Andrade Torrente
Scott Anderson
Pekka Paalanen
Maxime Roussin-Bélanger
Leandro Ribeiro
Stefan Agner
Michael Olbrich
Lucas Stach
Emmanuel Gil Peyrot
Daniel Stone
Marius Vlad
Marius Vlad
Ankit Nautiyal