My reading of the GL spec is that a dmabuf becomes a sibling to the
EGLImage created from it, and that all updates to the dmabuf will be
propagated to the EGLImage.
A rebind is still required every time the dmabuf content changes,
but this should be satisfied by gl_renderer_attach(), which does
a rebind when the buffer is commit.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
So, turns out the GL implementation is allowed to destroy EGLImage
sources if this isn't set. Apparently none we've ever been tested on do
this, but it looks like we should be setting this anyway.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
If we're not in a session we can fall back to sd_uid_get_display() to
find the user's primary session.
This allows launching weston from an ssh session or as a systemd
user service if a viable session is available.
It also more closely follows how libseat finds the session. The libseat
launcher can already do these things, so this change makes these
features common to both launchers.
Based on a patch by Sjoerd Simons <sjoerd.simons@collabora.com>
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Reported in !179 adding weston_output_repaint_failed resets the output
Co-authored-by: Daniel Stone
Co-authored-by: Julius Krah
Signed-off-by: n3rdopolis <bluescreen_avenger@verizon.net>
If two or more clients were running and the one that was focused when
weston itself lost keyboard focus was killed, weston would crash.
This is because commit 85d55540cb changed the way we handle saved keyboard
focus when we lose focus, and did so in such a way that the saved keyboard
focus listener could be removed from the surface destroy signal list
during the emit of the surface destroy signal. This corrupted the list
and led to a NULL pointer dereference.
Fix this by using a boolean flag to determine whether we should obey the
saved keyboard focus. We can set this safely in cases where
removing the listener would cause a crash.
Fixes#138
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This is prompted by the spurious CI failure
https://gitlab.freedesktop.org/wayland/weston/-/jobs/13891809
saying:
31/36 output-damage TIMEOUT 122.52s 8 subtests passed
32/36 output-transforms TIMEOUT 122.52s 16 subtests passed
33/36 subsurface TIMEOUT 122.52s
34/36 xwayland TIMEOUT 122.51s
35/36 ivi-shell-app TIMEOUT 122.51s
ERROR: Job failed: execution took longer than 5m0s seconds
That is hitting both kinds of timeouts at the same time: the per-test
timeouts, and the CI job total timeout.
That run seems to have had a particularly ill fortune, as a simple retry
finished the same job in 2 minutes, and the longest running test took
only 24 seconds.
Nevertheless, by Daniel Stone's suggestion let's bump both timeouts:
- the per-test timeout to 120 seconds, which with the multiplier in CI
goes up to 8 minutes
- the job timeout for all build related jobs to 15 minutes
The timeout for tests_standalone is not bumped as we are not adding
significant amounts of new tests there.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Adds a Pixman format field to the pixel format table, and
adjusts the shm format handling code in the Pixman renderer
to use this table.
Pixman formats have been registered only for specific 565, 8888,
and 2101010 layouts, as these have corresponding DRM format codes
and are commonly used.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
Instead of manually waiting for the seatd socket to come up, use
seatd-launch.
Add /usr/local/bin to PATH to avoid having to specify the whole
path to seatd-launch.
Signed-off-by: Simon Ser <contact@emersion.fr>
This upgrades seatd to the latest version.
Examples are disabled by default. Man pages are already disabled
by auto_features=disabled. Other build options have been renamed.
Signed-off-by: Simon Ser <contact@emersion.fr>
EGL_KHR_partial_update can be implemented independently of
EGL_EXT_buffer_age so we handle each case seperately.
Signed-off-by: Ben Davis <ben.davis@arm.com>
Signed-off-by: Dennis Tsiang <dennis.tsiang@arm.com>
weston_output_enable() initializes the list, but weston_output_release()
maybe be called even if the output was never enabled, triggering the
assert due to uninitialized (actually NULL) list head.
This can be triggered with a bad weston.ini, for example using an
invalid output transform value.
Check in weston_output_disable() instead, but because it too may be
called for non-enabled output, only if it was actually enabled.
Fixes: 1a4f87dec5
"libweston: introduce weston_paint_node"
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Since commit "drm-formats: save result of intersection in the first
array", every block of code where weston_drm_format_array_create() and
destroy() are being called could use init() and fini() instead.
Remove these two functions from the API to make it leaner. This patch
also modifies the code that depends on these functions to use init() and
fini().
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
In the current API, we have some set operations: join, intersect and
subtract. Both join and subtract receives two DRM format arrays and save
the result in the first one.
For the intersection we have a slightly different approach, what makes
the API weird. We don't save the result in the arguments, instead we
return a new array with the result.
Modify weston_drm_format_array_intersect() in order to make it similar
to the other two set operations.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
wet_shell_init() of fulscreen-shell has been missing to create a
screenshooter.
. adding a screenshooter_create() on wel_shell_init() for
fullscreen-shell.
. adding a dep_libexe_weston to meson.build to use the screenshooter
Signed-off-by: yj1231.heo <yj1231.heo@samsung.com>
Remove the following warning:
WARNING: 'make kvmconfig' will be removed after Linux 5.10
Please use 'make kvm_guest.config' instead.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Our core test structure is 36 bytes wide. Declaring it with a 32-bit
alignment should thus stripe it to 64 bytes. For some reason, clang+lld
lays them out with a 96-byte stride within the section (does it want an
entire 32-bit word when building with ASan?), getting the code wildly
confused when it tries to step through the structures.
So we could fix all our tests to avoid the fragile section dance, or we
could just waste another 4 bytes per test definition by bumping the
alignment up to 64 bytes, which seems to do enough to magically accord
with what clang+lld+ASan expect.
Signed-off-by: Daniel Stone <daniels@collabora.com>
EGL's native display type is not particularly well defined; in
gl-renderer we get around this by always treating it as a void *, since
for all the platforms we care about it's a pointer - gbm_device,
wl_display, or Display *.
The surfaceless platform doesn't care what the native display is (since
it doesn't have one by definition), so just use NULL instead of what may
be either NULL or 0 depending on environmental factors.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Give ourselves a bit more separation between the different job types, so
it's easier to see what's running and/or failing.
Signed-off-by: Daniel Stone <daniels@collabora.com>
ARMv7 is still an important architecture for us to run on, and running
on ARMv7 also gives us 32-bit build coverage. As distros are deprecating
their non-64-bit-x86 support, this may be our only realistic chance of
ensuring that our build is also 32-bit-clean.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Build a kernel for AArch64 and run it under virtme just like we do for
x86-64.
This requires adding support for the AArch64 defconfig variant, and
accommodating for the fact that it builds DRM as a module by default
rather than built in. The virtme branch we are using has also been
rebased on top of newer virtme upstream which unbreaks AArch64.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This only runs a single build job, to build without GL and not run any
tests, as KVM support is not yet included.
Signed-off-by: Daniel Stone <daniels@collabora.com>
GitLab CI has two execution scheduling models. The original model is to
split jobs into stages; jobs within a single stage may execute in
parallel, but execution is serialised between stages.
As we move to supporting multiple OSes and architectures, there is no
need to serialise, e.g. the AArch64 Linux build against the x86-64
FreeBSD container preparation.
Declare our dependencies explicitly using `needs`.
Signed-off-by: Daniel Stone <daniels@collabora.com>
0.57.0 has a bug where the whole test harness crashes when using TAP and
failing tests, cf. https://github.com/mesonbuild/meson/pull/8385
Signed-off-by: Daniel Stone <daniels@collabora.com>
When we build our base-OS container, we run debian-install.sh to install
packages and compile our build dependencies. Since the latter is mostly
OS-independent, split debian-install.sh into two scripts: one to install
and cleanup packages, and another just to compile stuff.
Signed-off-by: Daniel Stone <daniels@collabora.com>
No functional change to the test runs, apart from changing the job
names. This will allow us to test along more axes without more
duplication.
Signed-off-by: Daniel Stone <daniels@collabora.com>
GitLab already groups our various stages (container, build, etc) into
separate UI elements. Within those stages, the important information is
the parameterisation (architecture, OS, toolchain). We don't want that
to get ellipsised, so put that first in the job names.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The shared runners export ${FDO_CI_CONCURRENT} for the appropriate
number of CPUs we should use during our builds.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Because we weren't properly pinning the wayland-protocols version, and I
can't read, we missed updating this in !563.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The API expects uintptr_t (good!), but we're passing an unsigned long
here. Make the conversion explicit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Follow-up from commit 'desktop-shell: don't run fade animation if
compositor is inactive' where the reference was dropped directly,
instead of using weston_surface_destroy().
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
pointer/touch drag-n-drop operations could happen if there's no keyboard
hooked up or when it is unplugged.
Fixes: #235
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Updating PipeWire to the latest version lets us check that everything
still works well, and shows users that they are able to use it.
[daniels: Updated to 0.3.31, use symbolic ref tags rather than SHAs.
0.3.32 is released, but doesn't build in our Debian
environment; this is fixed upstream but there is no release
for it yet.]
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Derek Foreman
nerdopolis
Pekka Paalanen
Manuel Stoeckl
Simon Ser
Dennis Tsiang
Leandro Ribeiro
yj1231.heo
Daniel Stone
Marius Vlad
Sebastian Krzyszkowiak
Jonas Ådahl
Nicholas Niro
James Hilliard