Previously the configure script would silently disable the use of
accelerated cairo in the clients if cairo-gl could not be found (or
cairo-glesv2 if that was requested.) Conversely the use of cairo-gl
would be automatically enabled if it was found with no way to disable
that feature
This change adds --with-cairo which takes one of "image", "gl" or
"glesv2" (defaulting to "image"). If "gl" or "glesv2" is specified
cairo-egl is checked for as well as the specified renderer. If the check
fails then the configure process errors out.
This patch adds a configure option which will enable
user to install demo clients if desired. It is disabled
by default.
v2: Remove AC_DEFINE as it is not necesary
AC_USE_SYSTEM_EXTENSIONS enables _XOPEN_SOURCE, _GNU_SOURCE and similar
macros to expose the largest extent of functionality supported by the
underlying system. This is required since these macros are often
limiting rather than merely additive, e.g. _XOPEN_SOURCE will actually
on some systems hide declarations which are not part of the X/Open spec.
Since this goes into config.h rather than the command line, ensure all
source is consistently including config.h before anything else,
including system libraries. This doesn't need to be guarded by a
HAVE_CONFIG_H ifdef, which was only ever a hangover from the X.Org
modular transition.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
[pq: rebased and converted more files]
Whether or not a shm pool is used for resizing is now configurable at
build time (--disable-resize-optimization).
[pq: removed an unnecessary hunk from the patch]
Replace the GL renderer with the new rpi-renderer on the Raspberry Pi
backend. This makes Weston on rpi not use EGL or GL anymore, at all.
The weston_plane feature is disabled, since the rpi-renderer does the
same, but better.
Add a command line option to select the output transform. It is not a
weston.ini option for now, since the rpi backend does not read the
configuration file yet. Hopefully that will be done later with some
shared code.
Add the rpi options to 'weston --help' output.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This allows users to change the assigned display profile in GNOME (using
gnome-control-center) or KDE (using colord-kde) and also allows the profiling
tools to correctly inhibit the calibration state whilst measuring the native
screen response.
Add a demo program with:
- a main surface (green)
- a Cairo-image sub-surface (red)
- a raw GLESv2 widget (triangle)
Sub-surface input region is set empty to avoid problems in toytoolkit.
If Cairo links to libGL, then we will end up with also libGLESv2 linked
to subsurfaces program, and both libs getting really used, which leads
to disaster.
Do not build subsurfaces demo, if Cairo links to libGL and cairo-egl is
usable.
The GL rendering loop is not tied to the toytoolkit or the widget, but
runs directly from its own frame callback. Therefore it runs
independent of the rest of the application. This also relies on one of
two things:
- eglSwapInterval(0) is implemented, and therefore eglSwapBuffers never
blocks indefinitely, or
- toytoolkit has a workaround, that guarantees that eglSwapBuffers will
return soon, when we force a repaint on resize.
Otherwise the demo will deadlock.
The code is separated into three sections:
1. The library component, using only EGL, GLESv2, and libwayland-client
APIs, and not aware of any toolkit details of the parent application.
This runs independently until the parent application tells otherwise.
2. The glue code: a toytoolkit application widget, who has its own
rendering machinery.
3. The application written in toytoolkit.
This patch also adds new toytoolkit interfaces:
- widget_get_wl_surface()
- widget_get_last_time()
- widget_input_region_add()
Toytoolkit applications have not had a possibility to change the input
region. The frame widget (decorations) set the input region on its own
when used, otherwise the default input region of everything has been
used. If a window does not have a frame widget, it can now use
widget_input_region_add() to set a custom input region.
These are not window methods, because a widget may lie on a different
wl_surface (sub-surface) than the window.
Changes in v3:
- replace set_commit_mode with set_sync and set_desync
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
This patch is the 6th version of the FreeRDP based compositor.
Changes from last version:
* use pixman_image_get_stride() when appropriate
* always realloc
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Otherwise, it means the X11 compositor depends on another library to
pull xcb-shm (cairo?), which is not always the case. Here I end up with:
[01:54:38.970] Failed to load module:
$prefix/lib/weston/x11-backend.so: undefined symbol: xcb_shm_id
This patch installs the three header files that define the compositor
plugin interface as well as a pkg-config file. This allows
building weston plugins outside the weston tree. We currently don't make
any guarantees about the plugin API/ABI except that within a stable
branch we won't break it.
libunwind has a dwarf parser and automatically queries the dlinfo
for location of dlopened modules. The resulting backtrace is much
better and includes stack frames in dynamically loaded modules.
krh: Originally submitted for Xorg, adapted for weston:
http://lists.x.org/archives/xorg-devel/2013-February/035493.html
Note this require libunwind at least 1.1 to get the pkg-config files.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
By default enabled but one can disable it by passing --disable-xwayland-test
to the configure script. Also, the weston-tests-env script is trying to load
xwayland.so in either case, but it behaves resilient in the absence of that
meaning all the other tests are still going to be kicked for running.
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
When cairo-gl and mesa-glu are present on the system, autoconf successfully
recognizes both. However, I was wondering why weston-screensaver was not
building since autoconf reported all dependencies were met.
Move the mesa-glu PKG_CHECK before the conditional. Additionally, remove
redundant check for enable_egl, as it is implied when GLU is 'yes.'
Signed-off-by: Joe Konno <joe.konno@intel.com>
Add a frame buffer backend using pixman to render to fbdev.
This has been tested against nouveaufb but nothing else. Much of the code
came straight from the rpi backend (and copyright has been attributed
accordingly).
The behaviour of this backend on less modern frame buffers has yet to be
tested.
The refresh rate is calculated from the frame buffer's metadata. Every frame
is finished in synchrony with the refresh rate.
Frame buffer devices are currently specified on the command line (or using
the default of /dev/fb0); udev could be used in future to enumerate them.
pixman is used for compositing, and a suitable pixman format is built from
the frame buffer's metadata. This doesn't support the full range of
frame buffer formats, but does support varying BPPs of RGBA and ARGB. That
should be enough for now.
The following are not currently supported:
• FOURCC
• Non-packed formats (interleaved, planes, etc.)
• Non-true-colour formats (monochrome, greyscale, etc.)
• Big-endian formats (with component MSBs on the right)
• Non-RGBA and non-ARGB formats
Signed-off-by: Philip Withnall <philip@tecnocode.co.uk>
The Android backend has been fairly unused, since we do not have
projects actively using it. It gets basic build testing as part of the
normal build, but runtime testing it takes a considerable effort, and so
I have not done that in a long time. The code is slowly rotting, and
with new emerging backends it starts to be a burden, since it cannot use
udev, but needs evdev.
Therefore to ease Weston going forward, remove the Android backend. If
someone misses it, it can still be found in the stable 1.0 branch, and
of course resurrected from git history if someone wants to put in the
effort and maintain it.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
We were pulling in cairo and the image loading libraries through libshared.
Split out libshared into a core libshared and a libshared-cairo that
pulls in the extra libraries.
Add a new backend for the Raspberry Pi.
This backend uses the DispmanX API to initialise the display, and create
an EGLSurface, so that GLESv2 rendering is shown on the "framebuffer".
No X server is involved. All compositing happens through GLESv2.
The created EGLSurface is specifically configured as buffer content
preserving, otherwise Weston wouuld show only the latest damage and
everything else was black. This may be sub-optimal, since we are not
alternating between two buffers, like the DRM backend is, and content
preserving may imply a fullscreen copy on each frame.
Page flips are not properly hooked up yet. The display update will
block, and we use a timer to call weston_output_finish_frame(), just
like the x11 backend does.
This backend handles the VT and tty just like the DRM backend does.
While VT switching works in theory, the display output seems to be
frozen while switched away from Weston. You can still switch back.
Seats and connectors cannot be explicitly specified, and multiple seats
are not expected.
Udev is used to find the input devices. Input devices are opened
directly, weston-launch is not supported at this time. You may need to
confirm that your pi user has access to input device nodes.
The Raspberry Pi backend is built by default. It can be build-tested
without the Raspberry Pi headers and libraries, because we provide stubs
in rpi-bcm-stubs.h, but such resulting binary is non-functional. If
using stubs, the backend is built but not installed.
VT and tty handling, and udev related code are pretty much copied from
the DRM backend, hence the copyrights. The rpi-bcm-stubs.h code is
copied from the headers on Raspberry Pi, including their copyright
notice, and modified.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Instead of hardcoding drm-backend.so as the default if environment
presents neither Wayland nor X11, have a ./configure option to change
it. It still defaults to drm-backend.so, if not given.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add a headless backend and a noop renderer, mainly for testing
purposes. Although no rendering is performed with this backend,
this allow some of the code paths inside Weston and shm clients
to be tested without any windowing system or any need for drm
access.
If clients don't set a cursor, they get whatever the last cursor was
before the pointer entered their window. That's a little confusing, so
set a pointer on enter to avoid that. The down-side is that simple EGL
isn't very simple anymore.
https://bugs.freedesktop.org/show_bug.cgi?id=52452
Do not build the tablet-shell client if --disable-tablet-shell is given.
Change --enable-tablet-shell to --disable-tablet-shell in ./configure
--help output, since it is enabled by default. Add a description.
Use proper quoting in the conditional.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Armin K
Rob Bradford
Peter Hutterer
Kristian Høgsberg
Yanko Kaneti
Hardening
Quentin Glidic
Daniel Stone
Louis-Francis Ratté-Boulianne
Pekka Paalanen
Mun Gwan-gyeong
Richard Hughes
Damien Lespiau
Marcin Slusarz
Jan Arne Petersen
Scott Moreau
Tiago Vignatti
Konno, Joe
Philip Withnall
Vasily Khoruzhick
Ander Conselvan de Oliveira