This helps identify if we have actually have a build issue or if we have
a documentation build failure. Notifications sent out are specifying the
name of the build, making things much easier to figure out what actually
failed.
Uses another job w/o the need to run the tests (again).
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
If a screenshooting test fails, it quite likely writes not only the screenshot
but also a diff image highlighting the failed pixels. These would be good to
have in the CI artifacts for postmortem.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This adds a link in any MR to the documentation from the CI build, making it
easy to preview the documentation.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The stable FreeRDP 2.x branch has been released, so let's rely on that maintained
version and drop all the hacks for older versions. That makes the code and build
cleaner.
Signed-off-by: David Fort <contact@hardening-consulting.com>
The pipewire plugin uses this API as well, not just the remoting plugin. So
enable it if either is enabled.
And disable pipewire in the no-gl-renderer CI build. The virtual outputs don't
work without it.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
In order to run DRM-backend tests, a DRM-device is needed. As we
do not necessarily have control of the hardware that is going to
run our tests in GitLab CI, DRM-backend tests were being skipped.
This patch add support to run the tests using VKMS (virtual KMS).
To achieve this, virtualization is needed, as we need to run a
custom kernel during the CI job. We've decided to go with virtme,
as it is simpler to setup and works good for our use case.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Make use of the templating structure the templates provide. No
functional changes in the end, container-build's default behavior is the
previously called container-if-not-exists template.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The project was moved a while ago to make it look less waylandy. Same
sha, so no actual changes here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The reason the Xwayland test skips is that Xwayland was not installed. We
should exercise Xwayland as well in CI, so install it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
wayland/ci-templates!18 allows the $HOME environment variable to
propagate into the execution of creating our build container. Without
that, buildah would leave us with an empty $HOME, which would have pip
install into /.local/bin.
As $HOME is preserved during our actual native builds, we would try to
find meson in /root/.local/bin and fail, since it had been stored to a
different path.
Bump the ci-templates dependency to one with the fix so we can build new
images again.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This client contains driver-specific code to allocate buffers. However clients
shouldn't contain driver-specific code and should rely on e.g. mesa to allocate
buffers via standard interfaces.
Additionally, because the build system always tries to enable all features, some
experimental drivers and drivers that aren't included in amd64 distribution
packages were required. Users would need to manually disable some drivers.
Releasers would need to install libdrm from source (because the release process
forbids adding custom build flags). Dropping simple-dmabuf-drm simplifies both
building and releasing.
The functionality previously tested via simple-dmabuf-drm can now be tested with
simple-dmabuf-egl.
Signed-off-by: Simon Ser <contact@emersion.fr>
The next commit bumps the required Wayland version beyond what the repo
version supports.
Build wayland 1.17 into the docker image.
Signed-off-by: Sebastian Wick <sebastian@sebastianwick.net>
This hopefully fixes a failure introduced in
5a0706b238987bf3dcf7dde54556850ee88ccdba:
cp: cannot stat '/builds/wayland/weston/prefix-weston-build-native-meson/share/doc/weston/*': No such file or directory
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Building without gl-renderer seems to fail rather often. Introduce a
specific build job which tests this configuration.
Make use of the Folded Block Scalar in YAML to concatenate the build
option string with spaces. This will make diffing build option
changes very readable.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Fixes 0a13641ff: "gitlab-ci: Enable gitlab page for publishing documentation",
to point to correct sphinx documentation.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
While adding pages, remove CI_JOB_ID and CI_JOB_SHA from PREFIX, as this
apparently is not needed. Make build-native-meson a dependency for the
pages stage.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Weston 6.0.0 was released with both autotools and Meson build systems. That
should be enough for downstream to migrate to Meson build on their on pace.
Maintaining two build systems is a hassle, keep the one that is easier to work
with and let the other one go.
doc/dozygen/tool*.doxygen.in are not deleted, because they have not been
integrated with Meson yet.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reuse the templates from wayland/ci-templates:
whenever DEBIAN_TAG is changed, this will rebuild a new container.
This adds two things:
- better reliability (we do not randomly pull packages whenever the CI
runs and we can reproduce with this particular environment)
- faster builds, as we do not need to pull the universe at each run
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
[Pekka: bump DEBIAN_TAG]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Autotools is going away. Break the autotools build so that people are
guaranteed to notice before it is gone. If they have problems with Meson, they
can still use --enable-autotools to build with autotools, but we really want to
hear about any problems.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is so that, for instance, people using weston as their main Wayland
compositor can invert the sense of two finger scrolling or change
pointer acceleration using weston.ini, rather than having to edit C
code.
All of the options that libinput itself exposes through its API are now
exposed in weston.ini. The new options are called `tap-and-drag`,
`tap-and-drag-lock`, `disable-while-typing`, `middle-emulation`,
`left-handed`, `rotation`, `accel-profile`, `accel-speed`,
`scroll-method`, `natural-scroll`, and `scroll-button`. I have
successfully tested everything except for `rotation`, out of a lack of
hardware support.
weston now depends directly on libevdev for turning button name strings into
kernel input codes. This was needed for the `scroll-button` config
option. (weston already depends indirectly on libevdev through
libinput, so I figured people would be OK with this.) As a practical
matter for debian-style packagers, weston now has a build dependency on
libevdev-dev.
Right now, the code applies the same options to all attached devices
that a given option is relevant for. There are plans for multiple
[libinput] sections, each with different device filters, for users who
need more control here.
Signed-off-by: Eric Toombs <3672-ewtoombs@users.noreply.gitlab.freedesktop.org>
Correct the path to the build directory so we can capture Meson logs;
especially useful when tests fail like in #184.
An example of this change having been run with a deliberately-failing
test, capturing the Meson logs, can be found at:
https://gitlab.freedesktop.org/daniels/weston/-/jobs/94623
Signed-off-by: Daniel Stone <daniels@collabora.com>
Otherwise CI might fail due to
https://github.com/mesonbuild/meson/issues/4718 but the fix isn't
included in any release yet, so install meson from the 0.49 branch.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Add a GitLab CI configuration which tests building, 'make check', and
'make distcheck' of the tree inside a Debian Stretch container. The
choice of distribution base was arbitrary and may easily be changed.
As the version of wayland-protocols available is not sufficiently new,
we clone and build our own local version first. libwayland is new
enough, however we could potentially reuse the artifacts generated by
the Wayland CI job.
When commits are pushed to upstream, the commits will run this CI
pipeline to run these tests, and capture the result as an artifact
bundle, including the compiled binaries and full test suite logs.
Results can be seen at:
https://gitlab.freedesktop.org/wayland/weston/pipelines/
Signed-off-by: Daniel Stone <daniels@collabora.com>
Marius Vlad
Pekka Paalanen
David Fort
James Hilliard
Michael Olbrich
Leandro Ribeiro
Peter Hutterer
Daniel Stone
Simon Ser
Sebastian Wick
Stefan Agner
Harish Krupo
Benjamin Tissoires
Eric Toombs
Jonas Ådahl
Pekka Paalanen