We provide a (workaround) definition in weston-egl-ext.h, thus we don't
need any guards.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
... and use it from simple-egl and gl-renderer.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Rather than introducing a local copy of the
EGL_WL_create_wayland_buffer_from_image (re)definition, just use the
local header.
This also gives us access to EGL_WL_bind_wayland_display which is also
used in the client, yet the C file is missing a fall-back definition.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The reduction in range limits does have an effect for color values,
which are expressed as hexadecimal values from 0x00000000 to
0xFFFFFFFF. By limiting the range to INT_MAX, color values of
0x80000000 and up are in fact lost.
This reverts commit 6351fb08c2.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Yong Bakos <ybakos@humanoriented.com>
The third arg to strtol() specifies the base to assume for the number.
When 0 is passed, as is currently done in option-parser.c, hexadecimal
and octal numbers are permitted and automatically detected and
converted.
This change is an expansion of f6051cbab8
to cover the remaining strtol() calls in Weston, where the routine is
being used to read fds and pids - which are always expressed in base-10.
It also changes the calls in config-parser, used by
weston_config_section_get_int(), which in turn is being used to read
scales, sizes, times, rates, and delays; these are all expressed in
base-10 numbers only.
The benefit of limiting this to base-10 is to eliminate surprises when
parsing numbers from the command line. Also, by making the code
consistent with other usages of strtol, it may make it possible to
factor out the common code in the future.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
strtoul() has a side effect that when given a string representing a
negative number, it returns a negated version as the value, and does not
flag an error. IOW, strtoul("-42", &val) sets val to 42. This could
potentially result in unintended surprise behaviors, such as if one were
to inadvertantly set a config param to -1 expecting that to disable it,
but with the result of setting the param to 1 instead.
Catch this by using strtol() and then manually check for the negative
value. This logic is modelled after Wayland's strtouint().
Note that this change unfortunately reduces the range of parseable
numbers from [0,UINT_MAX] to [0,INT_MAX]. The current users of
weston_config_section_get_uint() are anticipating numbers far smaller
than either of these limits, so the change is believed to have no impact
in practice.
Also add a test case for negative numbers that catches this error
condition.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Improve error checking for situations like RDP_FD=42foo, or where the
provided number is out of range.
Suggestion by Yong Bakos.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
strtoul(nptr, endptr, ...) will set *endptr to nptr in the case of where
no digits were read from the string, and return 0. Running with
RDP_FD=foo would thus result in fd=0 being specified to
freerdp_peer_new(), which is unlikely to be the user's intent.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
strtoul(nptr, endptr, ...) will set *endptr to nptr in the case of where
no digits were read from the string. E.g. "foo:bar" should trigger an
error, instead of being read as "0:0" and allowed through.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
The third arg to strtol() specifies the base to assume for the number.
When 0 is passed, as is currently done in option-parser.c, hexadecimal
and octal numbers are permitted and automatically detected and
converted.
In weston and the weston clients and tests using option-parser.c, the
options are all things that can be expected to be specified in base 10:
widths, heights, counts, scales, font sizes, ports, ttys, connectors,
etc. The subsurfaces client uses two modes, limited to values 0 and 1
only. The zuc testsuite has a --random parameter for specifying a seed,
which is the only option where using hexadecimal or octal numbers might
conceivably happen.
The benefit of limiting this to base-10 is to eliminate surprises when
parsing numbers from the command line. Also, by making the code
consistent with other usages of strtol/strtoul, it may make it possible
to factor out the common code in the future.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Check errno, which is set of over/underflow, out of range, etc. Also
check for empty strings (the usages covered in this patch already also
cover the case where there are non-digits present). Set errno to 0
before making the strto*l call in case of pre-existing errors
(i.e. ENOTTY when running under the testsuite).
This follows the error checking style used in Wayland
(c.f. wayland-client.c and scanner.c).
In tests, also check errno, and add testcases for parsing '0'.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
v2: Elaborate what is meant with "major ABI versions" (Pekka).
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk> (v1)
v2: Rewrap, add a couple of missing words (Pekka).
v3: Use alternative wording (Yong).
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Current code flushes the connection when it receives
a delete window request. This means that a destroyed
window will remain available when X11 output gets
removed differently (ie, from a testing module).
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This patch makes use of new flags which were introduced
by previous patches to check if a surface/view is mapped
v2:
- Rebased to apply on git master
- Added comments with link to discussion about proposed
changes for weston_{surface,view}_is_mapped()
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This is a follow up for weston-test to manually
set mapped status for views/surfaces it controls
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This is a follow up for ivi-shell to manually
set mapped status for views/surfaces it controls
v2:
- Updated for changes in git master
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This is a follow up for fullscreen-shell to manually
set mapped status for views/surfaces it controls
v2:
- Add manual mapping to fs_output_apply_pending()
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This is a follow up for desktop-shell to manually
set mapped status for views/surfaces it controls
v2:
- Add manual mapping to shell_fade_create_surface()
and shell_ensure_fullscreen_black_view()
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Currently, weston assumes a surface/view is mapped if
it has an output assigned. In a zero outputs scenario,
this isn't really desirable.
This patch introduces a new flag to weston_surface and
weston_view, which has to be set manually to indicate
that a surface/view is mapped.
v2:
- Remove usage of new flags from
weston_{view,surface}_is_mapped at this point. They
will be added after all the implicit mappings have
been introduced
- Unmap a surface before unmapping a view so the input
foci is cleaned up properly
- Remove implicit view mapping from view_list_add
- Cosmetic fixes
v3:
- Rebased to apply on git master
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This patch follows a similar approach taken to detach the backends from
weston. But instead of passing a configuration struct when loading the
plugin, we use the plugin API registry to register an API, and to get it
in the compositor side. This API allows to spawn the Xwayland process
in the compositor side, and to deal with signal handling. A new
function is added in compositor.c to load and init the xwayland.so
plugin.
Also make sure to re-arm the SIGUSR1 when the X server quits.
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
[Pekka: moved xwayland/weston-xwayland.c -> compositor/xwayland.c]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Implement a simple register and lookup for function tables. This is
intended for plugins to expose APIs to other plugins.
It has been very hard to arrange a plugin to be able to call into
another plugin without modifying Weston core to explicitly support each
case. This patch fixes that.
The tests all pass.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Place it with the other weston_seat functions.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The name suggests that it activates surfaces, but the code says it
rather just assigns keyboard focus. Rename it for clarity, and so the
original function name could be used for something more appropriate
later. Switch order of parameters since keyboard focus is a property of
the seat. Update all callers as appropriate.
Change was asked for by pq, May 26, 2016:
"This should be called weston_seat_set_keyboard_focus(seat, surface).
Keyboard focus is a property of the seat."
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Useful for pointing out where the image comparisons fail.
Internal-screenshot-test is modified to save the visualization if the
test fails.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Screenshooting does not involve creating a wl_surface, so using struct
surface is superfluous.
Return a struct buffer instead. It could have been just a
pixman_image_t, but setting up proper destruction would be a bit more
work. Should not hurt to keep the wl_buffer around until the user is
ready to free the image.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This rewrites write_surface_as_png() into write_image_as_png(), which
operates on a pixman_image_t instead of a struct surface.
This is part of the migration to use pixman_image_t everywhere without
superfluous parameters/members.
Now the image saving handles more than just ARGB32 format, presumably.
At least it does not assume everything is always ARGB32.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This rewrites load_surface_from_png() to load_image_from_png(), to
return a pixman_image_t instead of a struct surface.
A loaded image has no need for wl_buffer or wl_surface or any of the
associated attributes. This is part of unifying to make everything use
pixman_image_t.
cairo_surface_flush() is added, because Cairo documentation for
cairo_image_surface_get_data() says you have to flush after drawing,
before using the data. It is unclear if loading a PNG counts as drawing,
so stay on the safe side.
load_image_from_png() now pays attention to the pixel format returned by
Cairo, which seems to come out as CAIRO_FORMAT_RGB24 in
internal-screenshot-test, not as CAIRO_FORMAT_ARGB32 as expected. I do
not know if Cairo actually guarantees the x8/a8 channel to be 0xff for
RGB24, but better to not trust it. Therefore the image is explicitly
converted to a8r8g8b8 as needed. This also adds support for loading A8
and RGB16_565 images, provided that Cairo delivers them.
The cairo surface is now wrapped directly into a pixman_image_t. If the
pixel format conversion is not needed, this eliminates a copy of the
image data. The Cairo surface will get automatically destroyed with the
Pixman image.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
check_surfaces_geometry() is removed as it was not used by anything, and
unlikely would be.
check_surfaces_equal() is merged into check_surfaces_match_in_clip(),
passing a NULL clip means to compare whole images.
check_surfaces_match_in_clip() is converted to work on pixman_image_t
instead of struct surface. The function is only concerned about
comparing images in memory, and does not care about a wl_buffer or a
wl_surface.
The verbosity of image comparisons is greatly reduced. An image mismatch
no longer prints a flood of raw pixel values. This will be replaced
later with a function writing out an error image instead.
Degenerate comparisons are no longer accepted, be that clip outside
images or zero area. Those are an indication of a programmer error.
The pixel format assumptions are made more visible in the code.
A new internal helper image_check_get_roi() computes and verifies the
area to be compared. Image iterator helper makes it simpler to write
manual pixel-poking loops.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Change create_shm_buffer() to handle any pixel format known to Pixman.
Presumably in the future we might want to test e.g. RGB565 content with
screenshot tests.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
No users remain outside the file. This will allow to fix the assumptions
in the function.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This removes the uses of create_shm_buffer() from this test.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This removes the uses of create_shm_buffer() from this test.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This removes the uses of create_shm_buffer() from this test.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We are growing more tests that need to handle buffers, both just images
and wl_buffers. Particularly the screenshooting facility needs these.
Currently everything is in struct surface, which contains more than we
need. It is a bit messy.
Create a new struct buffer to encapsulate the image representation, the
wl_buffer, and enough information to tear it all down (munmap) so we
don't have to leak everything. Some tests might start doing things in
loops, and leaking would accumulate.
Instead of inventing our own image representation, use pixman_image_t.
It is a well-tested library worth using, and we already rely on it in
other places.
This makes the tests depend on Pixman, which requires the fix for
building buffer-count, which would otherwise not find pixman.h.
The new create_shm_buffer_a8r8g8b8() creates an image with an explicit
format, and pixman_image_t keeps track of it. And stride and size and
data. This implementation is still a little hacky due to calling
create_shm_buffer().
A very new thing is buffer_destroy(). Previously we didn't really free
any buffers. It is not a problem when the process will exit soon anyway,
but it may become a problem if tests start iterating things.
Manual memset() on a image is converted to a pixman action, just to show
how to do it properly with pixman.
Stride and pixel format assumptions still linger all around, but those
are for another patch.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
A surface can be added to many layers.
This test is implemented to test this use-case
and the correct behaviour of get_layers_under_surface
API.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This patch introduces ivi_layout_view data struct,
which is a wrapper of weston_view.
There is always only one ivi_layout_view for an
ivi_layout_surface and ivi_layout_layer pair.
A surface could have many views with different
geometry and transformations, so that a surface
can be shown on:
1. On many screens
2. On the same screen with different positions
The geometry of a view is modified, when properties of
its layer are changed through ivi_layout_interface.
Users of ivi_layout_interface does not have direct access
to ivi_layout_view structure.
v2 changes:
1. Use ivi_view_is_rendered function instead of
active member
2. Add descriptions to introduced members of
structs
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
[Natsume: add empty line]
Reviewed-by: Wataru Natsume <wnatsume@jp.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add surface_created listener after the initialization of launchers.
Otherwise, surfaces of the launchers will be added to the application
layer too.
This does create a race where we might miss some surfaces that get
created before the UI client signals ready, but it was agreed the race
is not significant. You cannot use the launchers before the UI is ready,
and someone using systemd integration to launch clients in parallel to
Weston with ivi-shell and hmi-controller is unlikely. After all,
hmi-controller is just a demo.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
[Pekka: added extra commit message notes]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Currently, the gl-renderer setup is being done on per-output
basis. This isn't desirable when trying to make weston run
with zero outputs.
When there are no outputs present, there is no surface available
to attach an EGLContext to with eglMakeCurrent, which makes
any EGL command fail.
The problem is solved by using EGL_KHR_surfaceless_context to
bind an EGLContext to EGL_NO_SURFACE, or if that is
unavailable, creating a dummy PbufferSurface and binding an
EGLContext to it, so EGL gets set up properly.
v2:
- Move PbufferSurface creation into its own function
- Introduce a new EGLConfig with EGL_PBUFFER_BIT set
and use it to create a PbufferSurface
- Make PbufferSurface attributes definition static
- Check for return of gl_renderer_setup and terminate
in case it fails
- Remove redundant gl_renderer_setup call from
gl_renderer_output_create
- Only destroy the dummy surface if it is valid
This patch causes a warning from Mesa when using the i965 driver:
libEGL warning: FIXME: egl/x11 doesn't support front buffer rendering.
A bug has been filed about it since it seems to be spurious:
https://bugs.freedesktop.org/show_bug.cgi?id=96694
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
[Pekka: filed a Mesa bug and added the note in commit msg]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Emil Velikov
Bryce Harrington
Emmanuel Gil Peyrot
Armin Krezović
Giulio Camuffo
Pekka Paalanen
Ucan, Emre (ADITG/SW1)