We have dedicated header for the internal parts of the logging
framework, use that for the set-up part instead of the libweston public
API header.
Further more this removes weston_vlog() from public header as well and
moves them to weston-log-internal.h file.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Destroying the compositor after destroying the log scope will not print
out the messages in the tear down/clean-up phase of the compositor, so
add a new tear_down function which allows keeping a valid reference to
the compositor. This way we can destroy the compositor before destroying
the scope and keep the debug messages.
While at it remove the log context destroy part from the clean-up
of the compositor and make it stand on its own.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Rather than using 'begin_cb' rename it to a more suitable name.
Further more instead of using the scope use the subscription to pass as
an argument. The source scope is attached to the subscription when
creating it so we can access it that way.
This also adds a _complete and a _printf method for the subscription
such that the callbacks can use to write data to only _that_
subscription and to close/complete it, otherwise writing to a scope
results in writing to all subscriptions for that scope which is not
correct.
In the same time, the scope counter-parts of _write and _complete will
now use the subscription function as well.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniels@collabora.com>
Introduce a new private header file that only internal parts of the
library are allowed to use and shouldn't be exposed in the public header
of libweston.
Start by adding by adding functions that operate on the 'weston_buffer*'.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Depending on system loading, weston-launcher could drop the drm
master access before the compositor and all the clients receive
the notification. In this case, some commit could be sent to the
drm driver too late and get refused with error EACCES.
This error condition is not properly managed and causes weston to
hang.
Change the return type of start_repaint_loop() and repaint_flush()
from void to int, and return 0 on success or -1 if the repaint has
to be cancelled.
In the callers of start_repaint_loop() and repaint_flush() handle
the return value and cancel the repaint when needed.
In backend-drm detect the error EACCES and return -1.
Note: to keep the code cleaner, this change inverts the execution
order between weston_output_schedule_repaint_reset() and
repaint_cancel().
No need to wait for suspend or for any notification; in case the
weston reschedules a repaint, it will get EACCES again.
At resume, damage-all guarantees a complete repaint.
This fix is for atomic modeset only.
Legacy modeset suffers from similar problems, but it is not fixed
by this change. Since drm_pending_state_apply() never returns
error for legacy modeset, this change has no impact on legacy
modeset.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/117
This patch enables a user to opt for HDCP per output, by writing into
the output section of weston.ini configuration file. HDCP is always
enabled by default for the outputs.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The change in an output's content-protection may trigger a change in
the surface's content-protection status, and inturn the
content-protection available for the client.
This patch recomputes the content-protection level for a surface,
in case there is a change in content-protection level of an output,
showing the surface. In case of a change in the surface's
content-protection, the client associated with that surface is
notified.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
This patch adds the content-protection protocol implementation, to
enable a weston client application to request for content-protection
for its content via HDCP.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The protection requested for a given surface, must reach through the
weston_surface::pending_state, in the commit-cycle for the
weston_surface, so that it gets updated in the next commit.
As some protection is requested for a given weston_surface, it means
protection must be set for each of the outputs which show the surface.
While setting the protection of a weston_output, care must be taken
so as to avoid, degrading the protection of another surfaces, enjoying
the protection. For this purpose, all the weston_surfaces that are
shown on a weston_output are checked for their desired protection.
The highest of all such desired protections must be set for the
weston_output to avoid degrading of existing protected surfaces.
A surface requesting protection for a lower content-type can still be
provided protection for a higher type but the converse cannot be
allowed.
This patch adds support to set content-protection for a suface, which
inturn sets the content-protection for each of the outputs on which
it is shown, provided, none of the existing surface's protection
request is downgraded.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The actual protection status for a given weston_head depends upon the
corresponding drm_head's connector HDCP properties. On the other hand,
the actual protection for a weston_output is the minimum of the
protection status of its attached heads.
As a head's protection changes, the current protection of the output
to which the head is attached is recomputed.
This patch adds the support to keep track of the current
content-protection for heads and the outputs.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
For making an output secure, the content-protection should be set for
each of head attached to that output. So whenever the protection for
a weston_output is desired, it means that protection is desired for
each of the weston_head attached to that weston_output.
This patch introduces a new enum in libweston to represent the
requested/current protection statuses, equivalent to the type enum
defined by the weston-secure-output protocol. The new enum helps to
extend the content-protection status and requests to libweston and
the backends.
This patch also adds a new member desired_protection to store the
desired protection for an output in weston_output.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The xdg-output resources are listed in each head struct. They become idle when
the respective weston_output has been removed again. The client is supposed to
destroy them explicitly afterwards.
After starting an XWayland client xrandr displays the logical size as expected.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Also, add tag symbols related to 'weston_head'.
The bridge between sphinx and doxygen (breathe) has a useful directive:
doxygengroup. By using it we can scoop out symbols we'd like to display
documentation from/of.
At the same time some bits of the code has been using '\memberof' (a
doxygen command useful in C code to establish class like
relationship between objects and functions) but this seems not to be
recognized by the sphinx bridge.
Until we find a better solution, we replace '\memberof' command with
'\ingroup' one as to tag the symbols with an "object". This patch does
that for 'weston_head' object.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This fixes warnings for weston-debug, input, compositor, log and
linux-explicit-sync. Warnings range from swapping '[in]', '[out]' with
the function arguments to wrong parameter names.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
As we transition towards a more generic API for weston loggging
framework rename weston_debug_compositor to weston_log_context to show
the fact that this is not really debug but a logging context.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This patch allows initialization of weston-debug/log framework much earlier
than weston_compositor, which in turn will provide the option start
logging before weston_compositor has been created.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The printf() format specifier "%m" is a glibc extension to print
the string returned by strerror(errno). While supported by other
libraries (e.g. uClibc and musl), it is not widely portable.
In Weston code the format string is often passed to a logging
function that calls other syscalls before the conversion of "%m"
takes place. If one of such syscall modifies the value in errno,
the conversion of "%m" will incorrectly report the error string
corresponding to the new value of errno.
Remove all the occurrences of the specifier "%m" in Weston code
by using directly the string returned by strerror(errno).
While there, fix some minor indentation issue.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
This is an installed public header, and without the subdir would surely
conflict with something else.
include/libweston/meson.build is necessary for putting the generated header in
the right subdirectory so that '#include <libweston/version.h>' can work.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The main idea is to make libweston users use the form
#include <libweston/libweston.h>
instead of the plain
#include <compositor.h>
which is prone to name conflicts. This is reflected both in the installed
files, and the internal header search paths so that Weston would use the exact
same form as an external project using libweston would.
The public headers are moved under a new top-level directory include/ to make
them clearly stand out as special (public API).
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
With the addition of patch 433f4e77b7 we display the same view id (0)
for every view as we're modifying the local variable.
Displaying sub-surfaces based views is also problematic. The caller need
to modify the view number as well, so we instead we pass the address as
to allow that to happen. Otherwise we end up repeating the same number
for views without sub-subrfaces once those have been printed.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Implement the get_release request of the zwp_surface_synchronization_v1
interface.
This commit implements the zwp_buffer_release_v1 interface. It supports
the zwp_buffer_release_v1.fenced_release event for surfaces rendered by
the GL renderer, and the zwp_buffer_release_v1.immediate_release event
for other cases.
Note that the immediate_release event is safe to be used for surface
buffers used as planes in the DRM backend, since the backend releases
them only after the next page flip that doesn't use the buffers has
finished.
Changes in v7:
- Remove "partial" from commit title and description.
- Fix inverted check when clearing used_in_output_repaint flag.
Changes in v5:
- Use the new, generic explicit sync server error reporting function.
- Introduce and use weston_buffer_release_move.
- Introduce internally and use weston_buffer_release_destroy.
Changes in v4:
- Support the zwp_buffer_release_v1.fenced_release event.
- Support release fences in the GL renderer.
- Assert that pending state buffer_release is always NULL after a
commit.
- Simplify weston_buffer_release_reference.
- Move removal of destroy listener before resource destruction to
avoid concerns about use-after-free in
weston_buffer_release_reference
- Rename weston_buffer_release_reference.busy_count to ref_count.
- Add documentation for weston_buffer_release and ..._reference.
Changes in v3:
- Raise NO_BUFFER for get_release if no buffer has been committed,
don't raise UNSUPPORTED_BUFFER for non-dmabuf buffers,
so get_release works for all valid buffers.
- Destroy the buffer_release object after sending an event.
- Track lifetime of buffer_release objects per commit, independently
of any buffers.
- Use updated protocol interface names.
- Use correct format specifier for resource ids.
Changes in v2:
- Raise UNSUPPORTED_BUFFER at commit if client has requested a
buffer_release, but the committed buffer is not a valid linux_dmabuf.
- Remove tests that are not viable anymore due to our inability to
create dmabuf buffers and fences in a unit-test environment.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Implement the set_acquire_fence request of the
zwp_surface_synchronization_v1 interface.
The implementation uses the acquire fence in two ways:
1. If the associated buffer is used as GL render source, an
EGLSyncKHR is created from the fence and used to synchronize
access.
2. If the associated buffer is used as a plane framebuffer,
the acquire fence is treated as an in-fence for the atomic
commit operation. If in-fences are not supported and the buffer
has an acquire fence, we don't consider it for plane placement.
If the used compositor/renderer doesn't support explicit
synchronization, we don't advertise the protocol at all. Currently only
the DRM and X11 backends when using the GL renderer advertise the
protocol for production use.
Issues for discussion
---------------------
a. Currently, a server-side wait of EGLSyncKHR is performed before
using the EGLImage/texture during rendering. Unfortunately, it's not clear
from the specs whether this is generally safe to do, or we need to
sync before glEGLImageTargetTexture2DOES. The exception is
TEXTURE_EXTERNAL_OES where the spec mentions it's enough to sync
and then glBindTexture for any changes to take effect.
Changes in v5:
- Meson support.
- Make explicit sync server error reporting more generic, supporting
all explicit sync related interfaces not just
wp_linux_surface_synchronization.
- Fix typo in warning for missing EGL_KHR_wait_sync extension.
- Support minor version 2 of the explicit sync protocol (i.e., support
fences for opaque EGL buffers).
Changes in v4:
- Introduce and use fd_clear and and fd_move helpers.
- Don't check for a valid buffer when updating surface acquire fence fd
from state.
- Assert that pending state acquire fence fd is always clear
after a commit.
- Clarify that WESTON_CAP_EXPLICIT_SYNC applies to just the
renderer.
- Check for EGL_KHR_wait_sync before using eglWaitSyncKHR.
- Dup the acquire fence before passing to EGL.
Changes in v3:
- Keep acquire_fence_fd in surface instead of buffer.
- Clarify that WESTON_CAP_EXPLICIT_SYNC applies to both backend and
renderer.
- Move comment about non-ownership of in_fence_fd to struct
drm_plane_state definition.
- Assert that we don't try to use planes with in-fences when using the
legacy KMS API.
- Remove unnecessary info from wayland error messages.
- Handle acquire fence for subsurface commits.
- Guard against self-update in fd_update.
- Disconnect the client if acquire fence EGLSyncKHR creation or wait
fails.
- Use updated protocol interface names.
- User correct format specifier for resource ids.
- Advertise protocol for X11 backend with GL renderer.
Changes in v2:
- Remove sync file wait fallbacks.
- Raise UNSUPPORTED_BUFFER error at commit if we have an acquire
fence, but the committed buffer is not a valid linux_dmabuf.
- Don't put buffers with in-fences on planes that don't support
in-fences.
- Don't advertise explicit sync protocol if backend does not
support explicit sync.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Introduce support for the zwp_linux_explicit_synchronization_unstable_v1
protocol with an implementation of the zwp_linux_explicit_synchronization_v1
interface.
Explicit synchronization provides a more versatile notification
mechanism for buffer readiness and availability, and can be used to
improve efficiency by integrating with related functionality in display
and graphics APIs.
In addition, the per-commit nature of the release events provided by
this protocol potentially offers a solution to a deficiency of the
wl_buffer.release event (see
https://gitlab.freedesktop.org/wayland/wayland/issues/46).
Support for this protocol depends on the capabilities of the backend, so
we don't register it by default but provide a function which each
backend will need to call. In this commit only the headless backend when
using the noop renderer supports this to enable testing.
Note that the zwp_surface_synchronization_v1 interface, which contains
the core functionality of the protocol, is not implemented in this
commit. Support for it will be added in future commits.
Changes in v7:
- Added some information in the commit message about the benefits of
the explicit sync protocol.
Changes in v6:
- Fall back to advertising minor version 1 of the explicit sync protocol,
although we support minor version 2 features, until the new
wayland-protocols version is released.
Changes in v5:
- Meson support.
- Advertise minor version 2 of the explicit sync protocol.
Changes in v4:
- Enable explicit sync support in the headless backend for all
renderers.
Changes in v3:
- Use wl_resource_get_version() instead of hardcoding version 1.
- Use updated protocol interface names.
- Use correct format specifier for resource id.
- Change test name to 'linux-explicit-synchronization.weston'
(s/_/-/g).
Changes in v2:
- Move implementation to separate file so protocol can be registered
on demand by backends.
- Register protocol in headless+noop backend for testing purposes.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Introduce a helper function to disconnect the client on unhandled
buffer types, and use it in the gl and pixman renderers. The function
is modeled after linux_dmabuf_buffer_send_server_error.
Also print the egl error state in the gl renderer, in case the
unrecognized buffer error happens when querying an egl buffer.
https://gitlab.freedesktop.org/wayland/weston/issues/148
Add non-desktop property for weston_heads representing displays that the
desktop should not be extended to by default, e.g. head mounted displays.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Use the weston_surface is_opaque property, the opaque region, and the view
alpha value to determine whether the weston_view is opaque in a specific
region.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add an is_opaque property that is set to true if the attached buffer does not
have an alpha component, or if the solid color is non-transparent.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add a 'scene-graph' debug scope which will dump out the current set of
outputs, layers, and views and as much information as possible about how
they are rendered and composited.
Signed-off-by: Daniel Stone <daniels@collabora.com>
As a counterpart to weston_layer_set_mask_infinite(), returning if the
mask is the same as what is set.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
weston_debug is both a libweston API for relaying debugging messages,
and the compositor-debug wayland protocol implementation for accessing those
debug messages from a Wayland client.
weston_debug_compositor_{create,destroy}() are private API, hence not
exported.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
append the debug scope name along with the timestamp in
weston_debug_scope_timestamp API
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add explicit advertisement of debug scope names.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Since the repaint status of the flushed output may be reset if a output
repaint is failed, it is necessary to clear the repainted flag
immediately after output repaint flush/cancel.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This is regression apparently introduced in
0de859ede4, which accidentally swapped the
sign of 'delta_width' in the original call site. If one removes an
output, the remaining outputs on the right are getting moved even
further to the right.
The outputs to the right should be moved to the left instead, to close
the gap left by the removed output.
Reported-by: Tomasz Olszak <olszak.tomasz@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Rather than having a hardcoded dependency on the build-directory layout,
use an explicit module-map environment variable, which rewrites requests
for modules and helper/libexec binaries to specific paths.
Pekka: This will help with migration to Meson where setting up the paths
according to autotools would be painful and unnecessary.
Emre: This should also help setting up the test suite after a
cross-compile.
Pekka: A caveat here is that this patch makes it slightly easier to load
external backends by abusing the module map. External backends are
specifically not supported in libweston.
Signed-off-by: Daniel Stone <daniels@collabora.com>
v2:
Fixed ivi_layout-test-plugin.c:wet_module_init().
Do not change the lookup name of ivi-layout.ivi.
Improved documentation of weston_module_path_from_env() and made it cope
with map strings that a) do not end with a semicolon, and b) have
multiple consecutive semicolons.
Let WESTON_MODULE_MAP be printed into the test log so that it is easier
to run tests manually.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Suggested by Emil: Use a variable for strlen(name).
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
All outputs is canceled repaint when a output repaint is failed. At that
time, the output whose repaint is success is not scheduled because the
repaint status of that is still REPAINT_AWAITING_COMPLETION. Therefore,
we need to reset repaint schedule for all repainted outputs.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
In addition to the normal touch event processing mode, introduce a new
mode for calibrating a touchscreen input device.
In the calibration mode, normal touch event processing is skipped, and
the raw events are forwarded to the calibrator instead. The calibrator
is not yet implemented, so the calls will be added in a following patch.
To switch between modes, two functions are added, one for entering each
mode. The mode switch happens only when no touches are down on any touch
device, to avoid confusing touch grabs and clients. To realise this, the
state machine has four states: prepare and actual state for both normal
and calibrator modes.
At this point nothing will attempt to change the touch event mode.
The new calibrator mode is necessary, because when calibrating a
touchscreen, the touch events must be routed to the calibration client
directly. The touch coordinates are expected to be wrong, so they cannot
go through the normal focus surface picking. The calibrator code also
cannot use the normal touch grab interface, because it needs to be able
to distinguish between different physical touch input devices, even if
they are part of the same weston_seat. This requirement makes
calibration special enough to warrant the new mode, a sort of "super
grab".
Co-developed by Louis-Francis and Pekka.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Marius Vlad
Robert Beckett
Antonio Borneo
Ankit Nautiyal
Roman Gilg
Antonio Borneo
Pekka Paalanen
Alexandros Frantzis
Marius Vlad
Vasilis Liaskovitis
Philipp Zabel
Changwoo Cho
Daniel Stone
Pekka Paalanen
Tomohito Esaki
Pekka Paalanen
Louis-Francis Ratté-Boulianne