As from commit b7e5f10bf4, weston_view_is_opaque() is called from
debug_scene_graph_cb(), which on its own represents a (different)
scope. By default, we already have a subscriber for the 'log' scope,
which will cause a harmless, yet spurious, message.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Pipewire doesn't need to wait for any hardware. The finish_frame() callback is
just artifically delayed to generate the desired framerate.
So when the DPMS level changes, we can just call finish_frame() immediately if
necessary and cancel the timer.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Initially finish_frame() was never called in drm_output_update_complete() for
'dpms_off_pending = true'. This is wrong for repaint_status ==
REPAINT_AWAITING_COMPLETION and that was fixed in
68d49d772c ("compositor-drm: run finish_frame when
dpms is turned off in update_complete").
However finish_frame() may now be called for repaint_status !=
REPAINT_AWAITING_COMPLETION, which is not allowed and results in a failed
assertion.
Fix this by checking dpms and repaint_status unconditionally.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
It seem that we skipped to put back in TEXT mode the tty, in case a DRM
device node wasn't present at that time, or it isn't present at all. This
orders the destroy part correctly as to handle that case as well.
As a side effect, as the tty will still be set to GRAPHICS mode we will
require a manual change of the tty number, which might be not possible
on all systems. Properly putting back the tty to TEXT mode should avoid
that, and allows to re-use the same tty no in case the DRM device has
been created at a later point in time.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
In case of a crash tty remains in graphic mode. This change allows to restart weston without
taking care of the actual tty mode.
Signed-off-by: ahe <Andreas.Heynig@meetwise.com>
Allow to disable GBM modifiers at runtime using the environment variable
WESTON_DISABLE_GBM_MODIFIERS.
This can be useful for debugging or when modifiers cause issues, e.g. in
case modifiers use higher memory bandwidth and hence impose a lower
resolution limit as it is the case with Intel Kaby Lake graphics.
Related to: https://gitlab.freedesktop.org/wayland/weston/-/issues/404
Signed-off-by: Stefan Agner <stefan@agner.ch>
The pipewire plugin uses this API as well, not just the remoting plugin. So
enable it if either is enabled.
And disable pipewire in the no-gl-renderer CI build. The virtual outputs don't
work without it.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
The opaque region of a weston view is updated only if the alpha value is 1
and the transform matrix is of type WESTON_MATRIX_TRANSFORM_TRANSLATE.
While using ivi-shell, opaque region is never updated, as we are performing
scaling operations to the view transform matrix, even when the scaling
factor is 1 and thereby changing the type to WESTON_MATRIX_TRANSFORM_SCALE.
Perform scaling of the view transformation matrix only when the scaling
factor is non-zero.
Signed-off-by: Rajendraprasad K J <KarammelJayakumar.Rajendraprasad@in.bosch.com>
If a surface is not visible, then is does not matter if the view is on multiple
outputs. It will be skipped anyways when the output is rendered.
So check first if the surface is acually visible on the output before doing any
checks that might force rendering. This avoids unnecessary rendering.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
When dissociating a universal plane from a crtc, we currently don't
reset the current state of the plane (plane->state_cur). When attempting
to use this plane in the future, we can run into invalid memory accesses
due to left over associations with potentially freed drm backend
objects. This commit resets the state of the scanout and cursor
universal planes associated with a crtc.
The following scenario exhibits the problem:
1. Start a (fullscreen) client that is suitable for and assigned to
the scanout plane. The plane's state_cur->output value is set.
2. Unplug the monitor: the scanout plane is "released" but still
maintains the state_cur->output association.
3. Replug the monitor: the plane is deemed unavailable due to an
existing, albeit invalid, state_cur->output value. Note the memory
errors trying to access the drm_output which was freed at step (2).
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
weston-info is now deprecated in favor of wayland-info which is part of
wayland-utils.
Add a note to weston-info to inform users that weston-info is deprecated
and will be removed soon.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
compositor_accumulate_damage() is called for each output during repaint.
The DRM backend will only set keep_buffer for the surfaces that are visible on
the current output. So a buffer_ref is released that may still be needed. When
the output that shows the surface is repainted, the buffer_ref is gone and the
surface cannot be put on a plane.
Ignore all surfaces that are not visible on the current output to avoid this.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Currently the debug output for 'drm-backend' can be confusing. In the output of
debug_scene_view_print() views may be listed as 'not opaque' but later, during
plane assignment, other views underneath such a view is reported as 'occluded on
our output'.
This happens because weston_view_is_opaque() has some extra checks to determine
if a view is fully opaque, such as 'is_opaque' provided by the renderer for
formats that have no alpha channel.
Use weston_view_is_opaque() in debug_scene_view_print() as well to get more
accurate results.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
kiosk-shell is fullscreen shell for apps that use the xdg-shell
protocol. The goal is to make life easier for people shipping embedded
devices with simple fullscreen shell requirements, and reduce the
proliferation of desktop-shell hacks.
Top level surfaces are made fullscreen, whereas dialogs are placed on
top in the center of the output and retain their natural sizes. Dialogs
can be moved and (un)maximized, but resizing is currently not supported.
An app can be directed to a particular output by populating the
"app-ids" field with the app's XDG app id, in the relevant
"[output]" section in the weston config file.
Fixes: #277
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
There's a log that advertises support for universal planes. That
can make users think there's something wrong with Weston or their
systems when universal planes are not supported, but that's not
the case. Remove this log from the code.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
The core Wayland protocol explicitly states that wl_keyboard.modifiers
must be send after wl_keyboard.enter.
This commit also changes the behavior of `seat_get_keyboard` to not
send `wl_keyboard.modifiers` in case where seat had pointer focus,
but not keyboard one.
Signed-off-by: Kirill Chibisov <contact@kchibisov.com>
In order to run DRM-backend tests, a DRM-device is needed. As we
do not necessarily have control of the hardware that is going to
run our tests in GitLab CI, DRM-backend tests were being skipped.
This patch add support to run the tests using VKMS (virtual KMS).
To achieve this, virtualization is needed, as we need to run a
custom kernel during the CI job. We've decided to go with virtme,
as it is simpler to setup and works good for our use case.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Launcher-direct does not allow us to run using a different
seat from the default seat0. This happens because VTs are
only exposed to the default seat, and users that are on
non-default seat should not touch VTs.
Add check in launcher-direct to skip VT/tty management if user
is running on a non-default seat.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Fix the following build warning by moving the 'seals' declaration inside the
HAVE_MEMFD_CREATE guard:
../shared/os-compatibility.c: In function ‘os_ro_anonymous_file_get_fd’:
../shared/os-compatibility.c:341:6: warning: unused variable ‘seals’ [-Wunused-variable]
int seals, fd;
^
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
As in some circumstances there could be no output connected, avoid
retrieving the width/height of the output if none was found/connected.
Fixes: #384
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Surface roles are permanent, so it should not be cleaned up.
Fixes: #409
weston: ../libweston/compositor.c:4094: weston_surface_set_role: Assertion `role_name' failed.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
When there's neither configless nor surfaceless EGL extension
(i.e. not a Mesa driver), Weston falls back to a dummy pbuffer surface.
Weston attempts to find for that surface an EGL config but uses a NULL
array of pixel formats. This fails with the following messages:
EGL_KHR_surfaceless_context unavailable. Trying PbufferSurface
Found an EGLConfig matching { pbf; } but it is not usable because
neither EGL_KHR_no_config_context nor EGL_MESA_configless_context
are supported by EGL.
failed to choose EGL config for PbufferSurface
EGL error state: EGL_SUCCESS (0x3000)
Failed to initialise the GL renderer;
Signed-off-by: Tomek Bury <tomek.bury@broadcom.com>
This moves the creation of the blob to be earlier, to when the damage is
calculated. It replaces the damage tracked inside of the plane state
with the blob id itself.
This should stop creating new blob ids for TEST_ONLY commits, and them
being leaked in general, as the blob ids are now freed with the plane
state.
The FB_DAMAGE_CLIPS property is now always set if it's supported, and
will be 0 in the case that we have no damage information, which
signifies full damage to the kernel.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
The missing build dependency was added. The override to disable this
check can be removed.
Signed-off-by: Guillaume Champagne <champagne.guillaume.c@gmail.com>
cms-colord uses cms-helper functions which require lcms2. Therefore,
lcms2 must be added as a build dependency.
Signed-off-by: Guillaume Champagne <champagne.guillaume.c@gmail.com>
This adds the first DRM-backend test. It is very simple
and was made in order to make easier to add more complex
DRM-backend tests in the future.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
With this patch we add support to run DRM-backend tests locally
in the test suite. For now this won't work in the CI, as there
are no cards available. But the plan is to achieve this by using
VKMS (virtual KMS) in the future.
To run DRM-backend tests locally, first of all the user has to
set the environment variable WESTON_TEST_SUITE_DRM_DEVICE to
'card0', 'card1' or any other device where he wants to run
the tests. Also, for now it only works if it is run as root,
but in the future this problem will be solved.
The tests will run on a non-default seat. The reason for that
is that we want to avoid opening input devices unnecessarily.
Also, since DRM-backend usage requires gaining DRM master status
on a DRM KMS device, nothing else must be using the device at
the same time. To achieve this we use a lock to run the
DRM-backend tests sequentially.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In the test suite we may want to run a DRM-backend test on a
non-default seat, which may not have a input device associated.
Weston's default behavior is to not open if input devices are
not found, as it may cause troubles. For instance, Weston can
open but if no input device is set than the user can not
interact or leave it.
Add flag --continue-without-input to DRM-backend so we can run
these types of tests with no input. Notice that this won't force
the compositor to skip opening a input device if it finds it on
the non-default seat.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
The test suite is dealing only with headless-backend tests.
In order to make it able to run DRM-backend tests, we have
to properly select the renderer that it will use.
This patch add the command line option --use-pixman if the test
defines the DRM-backend renderer as RENDERER_PIXMAN, and it will
add nothing to the command line if it defines RENDERER_GL (the
DRM-backend default renderer is already GL). Also, if the user
defines the DRM-backend renderer as RENDERER_NOOP, the test will
fail (as it should, since DRM-backend does not implement it).
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In the test suite we have some default options which
are command line arguments used by most of the tests.
Two of these are width==320 and height==240. But
when we have DRM or fbdev backends, width and height
are not possible command line arguments. This makes
impossible to run tests that uses one of these types
of backends, as the compositor won't open if the
command line string is wrong.
Fix this by not passing command line arguments width
and height if the backend is DRM or fbdev.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
If users ask explicitly to log to a file, it makes sense to quit
when we fail opening that file. Continuing execution would mean
wasting users' time if they expect to find the log file at the
end of the session.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
When failing to open the log file nothing is reported to the user,
therefore we print a message on stderr when that happens.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
All timeline event timestamps are in CLOCK_MONOTONIC already. DRM KMS
timestamps are practically guaranteed to be CLOCK_MONOTONIC too, even though
presentation clock could theoretically be something else. For other backends,
the presentation clock is likely CLOCK_MONOTONIC_RAW due to
weston_compositor_set_presentation_clock_software().
This patch ensures that the recorded vblank timestamp is in CLOCK_MONOTONIC.
Otherwise interpreting the timeline traces might be difficult to do accurately,
since it would be hard to recover the relationship between the presentation
clock and timeline event timestamps.
The time conversion routine is the simplest possible, I don't think we need any
more accurate conversion for timeline purposes. Besides, DRM-backend is the
only backend where the timings actually matter, the other backends are
software-timed anyway.
Since the clock domain of the "vblank" attribute potentially changes, the
attribute is renamed. Wesgr never used this attribute.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Using the number of planes to determine if GL_TEXTURE_EXTERNAL_OES should be
used is incorrect with some modifiers: For example RGBA with a
I915_FORMAT_MOD_Y_TILED_CCS modifier has two planes.
Use eglQueryDmaBufModifiersEXT() to query if the current format/modifier only
supports GL_TEXTURE_EXTERNAL_OES.
Use the current code as fallback of modifiers are not supported.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
The wording of the xdg-shell protocol allows surfaces to not cover the
whole screen when they are made fullscreen. From the description of the
fullscreen state in xdg-shell:
The window geometry specified in the configure event is a maximum; the
client cannot resize beyond it. For a surface to cover the whole
fullscreened area, the geometry dimensions must be obeyed by the
client.
The last sentence is the condition for fullscreen coverage, not a
requirement.
This commit updates the code to not flag size mismatches for fullscreen
surfaces as a protocol error when the surface fits within the screen. In
such cases, the shell is responsible for centering surfaces
appropriately and also for obscuring other screen content as described
in the xdg_toplevel.set_fullscreen request description (and, indeed,
desktop-shell does all this).
For reference, contrast with the corresponding, stricter wording in the
obsolete xdg-shell-unstable-v6 protocol for the fullscreen state:
The window geometry specified in the configure event must be obeyed by
the client.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Make use of the templating structure the templates provide. No
functional changes in the end, container-build's default behavior is the
previously called container-if-not-exists template.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The project was moved a while ago to make it look less waylandy. Same
sha, so no actual changes here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a surface has subsurfaces then the surface itself is in the subsurface
list. To avoid printing it again there is a check to skip the child view,
if it is the same as the current view.
However, this fails when a surface with subsurfaces has two (or more) views:
The check to skip the parent fails for the other view and the two views are
printed again and again until a stack overflow occurs.
So instead check if the parent view of the subsurface view is the current
view. This way, any view that does not belong to a real subsurface is
skipped.
As a side effect, this ensures that each view of the subsurfaces is only
printed once at the correct place in the hierarchy.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Marius Vlad
Michael Olbrich
Andreas Heynig
Stefan Agner
Rajendraprasad K J
Alexandros Frantzis
Olivier Fourdan
ganjing
Simon Ser
Leandro Ribeiro
Kirill Chibisov
Jimmy Ohn
Frank Binns
James Hilliard
Tomek Bury
Scott Anderson
Guillaume Champagne
Antonio Caggiano
Pekka Paalanen
Peter Hutterer
Ken C
Paul Menzel