Allow the various attach handlers to access the existing buffer, only
referencing the new buffer when they have successfully attached.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Deduplicate the no-buffer and the import-fail case, and try to fall
through where we can. This will make it easier to shift the buffer
reference change later, so the attach subhandlers can reference the old
buffer when checking for compatibility.
Signed-off-by: Daniel Stone <daniels@collabora.com>
It's good to know if we succeeded or failed to import our buffers. This
will also later make for a more smooth transition when we start
returning a gl_buffer_state from them.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This only happens for the legacy renderer, but still, might as well
clean up after ourselves when we can't import a secondary plane.
Signed-off-by: Daniel Stone <daniels@collabora.com>
gl_surface_state has a bunch of members which are tied to the input
buffer, rather than the surface per se.
Split them out into a separate gl_buffer_state member as a first step
towards sanitising its use and lifetime.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This new struct collects all the things that a color manager needs to
set up when any colorimetry aspect of an output changes. The intention
is to make the color manager API less verbose.
In this first step, the new struct is added and replaces the fields in
weston_output.
The intention is for the following color manager API changes to
dynamically allocate this structure. Unfortunately, until that actually
happens, we need a temporary way to allocate it. That is
weston_output::colorout_, which will be removed in the next patch. This
keeps the patches more palatable for review at the cost of some
back-and-forth in code changes.
This is a pure refactoring, no functional changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Add a mode argument to weston_buffer_reference which indicates whether a
buffer's storage may/will be accessed, or whether the underlying storage
will no longer be accessed, e.g. because it has been copied. This will
be used to retain a pointer to the weston_buffer whilst being able to
send a release event to the client.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Make sure we don't die if we're asked to flush the damage on a SHM
buffer which has subsequently been destroyed.
Signed-off-by: Daniel Stone <daniels@collabora.com>
y_inverted meant that the buffer's origin was (0,0), and non-inverted
meant that the buffer's origin was (0,height). In practice, every buffer
was 'inverted' into our natural co-ordinate space that we use
everywhere.
Switch to using an explicit origin enum to make this more clear.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Rather than calling accessors (wl_shm_buffer_get etc) to figure out
which type our buffer is, just look in the structure.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Rather than only filling weston_buffer information when we first come to
use it, add an explicit hook so we can fill the dimensions the first
time the buffer's attached.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Make sure we only import dmabufs where the underlying pixel_format is
known: if we can't reason about the buffer content, we're not entirely
likely to be able to display it well.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When we first see a buffer attached, we create a weston_buffer for it.
The weston_buffer doesn't contain any useful information in and of
itself; that's left to renderers to populate later.
Switch this to doing it in the core at the first opportunity, at least
for SHM and dmabuf buffers; EGL buffers will follow in the next commit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We already have the buffer in the caller, and every no-op implementation
will want to access the buffer. So might as well pass it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The comment about needing to have destroyed images is somewhat less true
now that we actively avoid doing so.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: 0b51b02c5e ("gl-renderer: Don't re-import dmabufs")
The following GL extensions provide support for shaders CM:
-GL_OES_texture_float_linear makes GL_RGB32F linear filterable.
-GL ES 3.0 provides Texture3D support in GL API.
-GL_OES_texture_3D provides sampler3D support in ESSL 1.00.
If abovesaid is supported then renderer sets flag WESTON_CAP_COLOR_OPS
which means that all fields in struct weston_color_transform are
supported, for example, 1DLUT and 3DLUT.
Use GL_OES_texture_3D to implement 3DLUT function which
uses trilinear interpolation for pixel processing or bypass as is.
Quote from https://nick-shaw.github.io/cinematiccolor/luts-and-transforms.html
"3D LUTs have long been embraced by color scientists and are one of
the tools commonly used for gamut mapping. In fact, 3D LUTs are used
within ICC profiles to model the complex device behaviors necessary
for accurate color image reproduction".
Quote from https://developer.nvidia.com/gpugems/gpugems2/part-iii-high-quality-rendering/
chapter-24-using-lookup-tables-accelerate-color
is about interpolation: "By generating intermediate results based
on a weighted average of the eight corners of the bounding cube,
this algorithm is typically sufficient for color processing,
and it is implemented in graphics hardware".
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Introduce shader color mapping identity and 3D LUT.
Shader requirements struct uses union for color mapping
to prepare the place for 3x3 matrix.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Zoom is a neat trick, but in its current form it's very hard to test
and maintain.
It also causes output damage to scale outside of the output's boundaries,
which leads to an extra clipping step that's only necessary when zoom
is enabled.
Remove it to simplify desktop-shell and compositor.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
These formats are useful because they are often easier to produce
on CPU than half-float formats, and abgr16161616 has both >= 10bpc
color channels and adequate alpha, unlike abgr2101010.
The 16-bpc textures created from buffers with these formats require
the GL_EXT_texture_norm16 extension.
As WL_SHM_FORMAT_ABGR16161616 was introduced in libwayland 1.20,
update Weston's build requirements and CI.
The formats also needed to be registered in the pixel format table,
and defined in a fallback path if recent libdrm is not available.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
This adds the initial dma-buf feedback implementation, following the
changes in the dma-buf protocol extension.
The initial dma-buf feedback implementation gives support to send
default feedback and per-surface feedback. For now the per-surface
feedback support is very basic and is still not implemented in the
DRM-backend, what basically means that KMS plane's formats/modifiers are
not being exposed to clients. In the next commits of this series we add
the DRM-backend implementation.
This patch is based on previous work of Scott Anderson (@ascent).
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Add function to query the DRM device given an EGLDisplay. It is the
device being used by the compositor to perform composition.
This will be useful in the next commits of this series, where we add
support for dma-buf feedback.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
These formats will be eventually be useful for color managed clients
using wl_shm that wish to submit buffers encoding high dynamic range
images.
While the minimum requirement for linearly filterable half float
textures is GL ES 2.0 + GL_OES_texture_half_float_linear, to keep
the code simple, this commit only enables the new formats when
the requirements for color management (notably including GL ES 3.0
and GL_EXT_color_buffer_half_float) are available.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
Adding these formats makes it possible for clients using wl_shm to
submit buffers with 10 bits per pixel, and thus (if Weston is
configured with an xrgb2101010 frame buffer) display more precise
colors on some computer monitors.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
My reading of the GL spec is that a dmabuf becomes a sibling to the
EGLImage created from it, and that all updates to the dmabuf will be
propagated to the EGLImage.
A rebind is still required every time the dmabuf content changes,
but this should be satisfied by gl_renderer_attach(), which does
a rebind when the buffer is commit.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
So, turns out the GL implementation is allowed to destroy EGLImage
sources if this isn't set. Apparently none we've ever been tested on do
this, but it looks like we should be setting this anyway.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
EGL_KHR_partial_update can be implemented independently of
EGL_EXT_buffer_age so we handle each case seperately.
Signed-off-by: Ben Davis <ben.davis@arm.com>
Signed-off-by: Dennis Tsiang <dennis.tsiang@arm.com>
Potential failures when creating the EGL image could cause an incorrect
number of num images (num_planes > num_images). With this change
egl_image_unref() requires an additional check to avoid any potential NULL
derefs when cleaning up. We do it straight in egl_image_unref() instead
of adding guards all over the necessary parts.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
As observed on some platforms, importing known DMA buffers can cause
failures, leading to an attempt of destroyng an EGL image not set. This patch
resets the num_images such that loop becomes inert when destroying the
DMA buffer, and avoids passing an egl image to it.
The initial import doesn't have this issue as it sets the num_images in
case it succeeds. This also corrects the assumption that the num_images
were 0 at that point which, if the initial import succeded, was actually set
to 1.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Use the blending to output color space transformation when blitting from
the shadow to a framebuffer.
This allows the blending and output color spaces to differ as long as
shadow is used, in case a backend does not off-load the color
transformation.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Use the sRGB to output color space transformation when blitting the
borders (decorations) into an output window (nested compositor).
Nested output does not need to be sRGB anymore, as far as the
decorations are concerned.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Use the sRGB to blending color space transformation for the censoring
color fill and triangle fan debug drawings.
This removes the assert that the output's blending space is (non-linear)
sRGB.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This makes weston_color_transform object be able to express
three-channel one-dimensional look-up table transformations. They are
useful for applying EOTF and EOTF^-1 mapping, or, gamma curves. They
will also be useful in optimizing a following 3D LUT tap distribution
once support for 3D LUT is added.
The code added here translates from the lut_3x1d fill_in() interface to
a GL texture to be used with SHADER_COLOR_CURVE_LUT_3x1D for
weston_surfaces.
It demonstrates how renderer data is attached to weston_color_transform
and cached.
GL_OES_texture_float_linear is required to be able to use bilinear
texture filtering with 32-bit floating-point textures, used for the LUT.
As the size of the LUT depends on what implements it, lut_3x1d fill_in()
interface is a callback to the color management component to ask for an
arbitrary size. For GL-renderer this is not important as it can easily
realize any LUT size, but when DRM-backend wants to offload the EOTF^-1
mapping to KMS (GAMMA_LUT), the LUT size comes from KMS.
Nothing actually implements lut_3x1d fill_in() yet, that will come in a
later patch.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This adds shader support for using a three-channel one-dimensional
look-up table for de/encoding input colors. This operation will be useful
for applying EOTF or its inverse, in other words, gamma curves. It will
also be useful in optimizing a following 3D LUT tap distribution once
support for 3D LUT is added.
Even though called three-channel and one-dimensional, it is actually
implemented as a one-channel two-dimensional texture with four rows.
Each row corresponds to a source color channel except the fourth one is
unused. The reason for having the fourth row is to get texture
coordinates in 1/8 steps instead of 1/6 steps. 1/6 may would not be
exact in floating- or fixed-point arithmetic and might perhaps risk
unintended results from bilinear texture filtering when we want linear
filtering only in x but not in y texture coordinates. I may be paranoid.
The LUT is applied on source colors after they have been converted to
straight RGB. It cannot be applied with pre-multiplied alpha. A LUT can
be used for both applying EOTF to go from source color space to blending
color space, and EOTF^-1 to go from blending space to output
(electrical) space. However, this type of LUT cannot do color space
conversions.
For now, this feature is hardcoded to off everywhere, to be enabled in
following patches.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Always when supported, make the fragment shader default floating point
precision high. The medium precision is roughly like half-floats, which
can be surprisingly bad. High precision does not reach even normal
32-bit float precision (by specification), but it's better. GL ES
implementations are allowed to exceed the minimum precision requirements
given in the specification.
This is an advance attempt to avoid nasty surprises from poor shader
precision.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Add a new shader requirements bit input_is_premult which says whether
the texture sampling results in premultiplied alpha or not. Currently
this can be deduced fully from the shader texture variant, but in the
future there might a protocol extension to explicitly control it. Hence
the need for a new bit.
yuva2rgba() is changed to produce straight alpha always. This makes
sample_input_texture() sometimes produce straight or premultiplied
alpha. The input_is_premult bit needs to match sample_input_texture()
behavior. Doing this should save three multiplications in the shader for
straight alpha formats.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This creates the FP16 shadow framebuffer automatically if the color
transformation from blending space to output space is not identity and
the backend does not claim to implement it on the renderer's behalf.
That makes the weston_output_set_renderer_shadow_buffer() API and
use-renderer-shadow weston.ini option obsolete.
To still cater for the one test that needs to enable the shadow
framebuffer in spite of not needing it for color correct blending, the
quirk it uses now also forces the shadow.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Compile time constants play an important role in keeping the shader
programs fast. Introduce an informal annotation to mark compile time
constants to make the shader code easier to reason with.
This will make much more sense once functions with compile time constant
parameters are added.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Daniel Stone
Robert Mader
Pekka Paalanen
Vitaly Prosyak
Derek Foreman
Manuel Stoeckl
Leandro Ribeiro
Scott Anderson
Dennis Tsiang
Emmanuel Gil Peyrot
Link Mauve
Marius Vlad