The purpose of this argument is to hold timestamp information about
events that occurred on the GPU. This argument allows us to include GPU
timestamps in timepoints such as the beginning and end of frame
rendering.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This change replaces a queued emission of buffer-release events (which
is prone to starvation) with a regular event emission. This means that
client programs no longer need to secretly install surface frame
listeners just to guarantee that they get correctly notified of buffer
lifecycle events.
v2:
More information about the historical reasons why this change hadn't
happened yet, and the consensus to finally move ahead with it can be
found at the discussion terminating in this message:
https://lists.freedesktop.org/archives/wayland-devel/2017-September/035147.html
Signed-off-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Not referenced anywhere ever, has been there since the introduction of
fbdev-backend.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Fix the assumption that MAP_FAILED would be equal to NULL. It is not.
Set 'fb' explicitly to NULL on mmap failure so that comparisons to NULL
would produce the expected result.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Simplifies the code, and makes moving weston_output_init() into
wayland_output_create_common() a little easier.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Gets rid of the constant size char array.
While here, document the function.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
This patch disables the opacity binding when the modifier is configured
to `none' in weston.ini, and thus supports use cases where one does not
want to have this binding.
Signed-off-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This patch changes the zoom binding to use the modifier configured in
weston.ini instead of hardcoding MODIFIER_SUPER.
Signed-off-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When calibrating touchscreen with weston-calibrator, you can use the mouse to
click on the cross which is recorded as a touch event. This event is used to
compute the final calibration of the touchscreen which results in invalid
touchscreen calibration and broken touchscreen behaviour.
In order to avoid to use the mouse in weston-calibrator, we disable mouse
operation by default and add a parameter "--enable-mouse" to enable it.
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
weston_check_egl_extension() returns a bool, not a pointer.
Fixes: ce5b614c80 "clients/nested: use weston_check_egl_extension
over strstr"
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Remove the option, because it is hard to use.
Drm connector ids are hard to reach for users,
and they can change when kernel or device tree
is modified.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[Pekka: bump WESTON_DRM_BACKEND_CONFIG_VERSION]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Two cases are tested: success and fail case of the screen-remove-layer API.
Signed-off-by: Michael Teyfel <mteyfel@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The old code for scheduling configure events on idle looked like:
if (configure_scheduled) {
if (this_event_is_the_same) {
remove_timer();
return;
}
}
If we queued one new event (either changed, or the client had never
received any configure event), followed immediately by one event which
was the same as the first, we would delete the scheduled send of the
first event.
Fix this by treating unconfigured surface as never the same.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
drm_pending_state is currently skeletal, but will be used to retain
data through begin_repaint -> assign_planes -> repaint -> repaint_flush.
The flush and cancel functions are currently identical, only freeing the
state, but they will be used for different purposes in later patches.
Specifically, the intent is to apply any pending output changes (through
PageFlip/SetCrtc, or the atomic ioctls) in flush, and only free the
state in cancel.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Retain drm_plane tracking objects for all actual DRM planes when using
universal planes, not just overlay planes. Rename uses of 'sprite' to
'plane' to make it clear that it can now be any kind of plane, not just
an overlay/sprite.
These are currently unused.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add awareness of, rather than support for, universal planes. Activate
the client cap when we start if possible, and if this is activated,
studiously ignore non-overlay planes. For now.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Co-authored-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a cache for DRM property IDs and values, and use it for the two
connector properties we currently update: DPMS and EDID.
As DRM property ID values are not stable, we need to do a name -> ID
lookup each run in order to discover the property IDs and enum values to
use for those properties. Rather than open-coding this, add a property
cache which we can use across multiple different object types.
This patch takes substantial work from the universal planes support
originally authored by Pekka Paalanen, though it has been heavily
reworked.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
All planes being displayed have a framebuffer. What makes 'fb_plane'
special is that it's being displayed as the primary plane by KMS.
Previous patchsets renamed this to 'primary_plane' to match the KMS
terminology, namely the CRTC's base plane, which is controlled by
drmModeSetCrtc in the legacy API, and identified by PLANE_TYPE ==
"Primary" in the universal-plane API.
However, Weston uses 'primary_plane' internally to refer to the case
where client content is _not_ directly displayed on a plane, but
composited via the renderer, with the result of the compositing then
shown.
Rename to 'scanout_plane' as our least-ambiguous name, and document it a
bit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
This moves the single sprite creation code from create_sprites() into a
new function. The readability clean-up is small, but my intention is to
write an alternate version of create_sprites(), and sharing the single
sprite creation code is useful.
The removal code now actually removes the plane from the list.
In doing this, the gymnastics required to exact the CRTC ID the plane
was last on when making a disabling drmModeSetPlane call have been
removed; specifying the CRTC is not necessary when disabling a plane.
(The atomic API goes a step further, mandating it be zero.)
[daniels: Genericised from drm_sprite to drm_plane, moving some of the
logic back into create_sprites(), also symmetrical
drm_plane_destroy.]
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Fixes the failure to start with fbdev-backend:
weston: /home/pq/git/weston/libweston/compositor.c:4733: weston_compositor_add_pending_output: Assertion `output->disable' failed.
The disable hook was completely unimplemented, and the regression was
caused by e952a01c3b
"libweston: move asserts to add_pending_output()".
It used to work because Weston never tried to explicitly disable the
fbdev output, but now it is hitting the assert.
Fix it by tentatively implementing a disable hook. It has not been
tested to work for explicit disabling, but it does solve the regression.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=102208
Cc: bluescreen_avenger@verizon.net
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Tested-by: n3rdopolis <bluescreen_avenger@verizon.net>
It's been unused since the legacy (non-libinput) input backends have
been removed.
Signed-off-by: Arnaud Vrac <rawoul@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
The GCC address sanitizer overrides dlopen and dlclose, so the configure
test does not detect libdl as a needed dependency for linking. It is
still needed though, as dlsym is not exported by the sanitizer. The
result is that linking fails in the end.
Fix this by checking for dlsym instead of dlopen.
This can be reproduced by configuring the build with:
CFLAGS="-fsanitize=address -fsanitize=undefined"
LDFLAGS="-fsanitize=address -fsanitize=undefined"
Signed-off-by: Arnaud Vrac <rawoul@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Without this weston crashes when a client using xdg-shell-v5 is run.
Signed-off-by: Arnaud Vrac <rawoul@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
xdg_shell requires this information to be shared with the client in
order to conform with the specification.
The code to forward this to the client by way of a configure() event
is already in place and works fine, it was just never being used until
now.
Signed-off-by: Philipp Kerling <pkerling@casix.org>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
commit 749637a8a3
introduced this feature, but the break is outside of any conditional
so only the first item in the list is ever tested.
If a client skips a few configures and then acks the most recent
it's still operating within spec, so the break should only occur
when a match is found.
This version also adds a break after we miss the target, as a tiny
optimization (the list will be cleaned up on disconnect anyway),
as it makes the code no more difficult to read or maintain.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
This is easily noticed as a leaked fd on every VC switch.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Fix a regression with VT-switching away from Weston and then back
causing drmModePageFlip() to fail with ENOSPC or EINVAL, leaving one or
more outputs not updated. The regression appeared in
47224cc9312fef05c1a523ea0da0a1aae66f100d:
compositor-drm: Delete drm_backend_set_modes
Fix it by forcing a drmModeSetCrtc() on all outputs both initially
created and after VT-switch in.
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v2: moved state_invalid=true from create_output_for_connector() to
drm_output_enable()
Reviewed-by: Daniel Stone <daniels@collabora.com>
We still need to close fds passed to us - or we leak quite a few fds
on VC switch.
Regression, originally fixed in 8f5acc2f3a
and re-broken in commit 72dea06d79
but only for the logind launcher.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Shell surfaces may have a geometry that is different to the size of
their main surface, e.g. due to subcompositing.
In states where size is strictly enforced (fullscreen and maximized),
the size that the compositor wants must be checked against the window
geometry and not just the main surface size.
Fix by calling weston_desktop_surface_get_geometry and using that size
instead of main surface size.
Signed-off-by: Philipp Kerling <pkerling@casix.org>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
The focused surface is used for determining whether shell surfaces
are activated. They should also be considered activated when a
subsurface has focus. Inserting a call to
weston_surface_get_main_surface fixes this.
seat->focused_surface is only used for shell_surface keyboard focus
tracking.
Signed-off-by: Philipp Kerling <pkerling@casix.org>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
This is a simple wrapper for casting the user data of a wl_resource into
a struct weston_output pointer. Using the wrapper clearly marks all the
places where a wl_output protocol object is used.
Replace ALL wl_output related calls to wl_resource_get_user_data() with
a call to weston_output_from_resource().
v2: add type assert in weston_output_from_resource().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
It's a little awkward to try to keep the weston_output::region and
weston_output::previous_damage allocate exactly only when the output is
enabled. There was also a leak: weston_output_move() was calling
weston_output_init_geometry() on an already allocated regions without
fini in between.
Fix both issues by allocating the regions in weston_output_init(),
always fini/init'ing them in weston_output_init_geometry(), and fini'ing
for good in weston_output_destroy().
This nicely gets rid of weston_output_enable_undo() so I do not need to
try to figure out what to do with it later.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Move the wl_output global management into weston_compositor_add_output()
and weston_compositor_remove_output().
If weston_output_enable() fails, there is no need to clean up the global
and the clients will not see a wl_output come and go.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Move the output id management into weston_compositor_add_output() and
weston_compositor_remove_output(). This is a more logical place, and
works towards assimilating weston_output_enable_undo().
The output id is no longer available to the backend enable() vfuncs, but
it was not used there to begin with.
v2: moved assert earlier in weston_compositor_add_output()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Enabling an already enabled output is an error, at least with the
current implementation.
However, disabling an output that has not been enabled is ok.
Cope with the first and document the second.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
It was ambiguous what this flag meant - it did not mean whether the
backend is considering this output to be enabled, because
weston_output_destroy() unsets it while deliberately not calling the
backend disable() vfunc.
Perhaps the most clear definition is with respect to the output's
assignment in the pending vs. enabled output lists. There is also a whole
bunch of variables that are allocated only when enabled is true.
Since the flag is related to the list membership, set and clear the flag
only when manipulating the lists.
Assert that weston_compositor_add_output() and
weston_compositor_remove_output() are not called in a wrong state.
v2:
- talk about "list of enabled outputs"
- clear 'enabled' in weston_compositor_remove_output() earlier
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
weston_compositor_add_pending_output() is the point through which all
backends must go when creating a new output. The enable and disable
vfuns are essential for anything to be done with the output, so it makes
sense to check them here, rather than when actually enabling or
disabling.
Particularly the disable vfunc is rarely called, so this gets the check
better excercised.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Only used internally in core. Needs to happen automatically when
something changes, so there should no need to call it from outside.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Only used by weston_output_enable().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Document two more functions of the weston_output API.
Exported functions marked internal are meant for backends only.
Exported functions not marked internal are meant for libweston users.
v2: talk about "list of enabled outputs".
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
A weston_output available to the compositor should always be either in
the list of pending outputs or the list of enabled outputs. Let
weston_compositor_add_output() and weston_compositor_remove_output()
handle the moves between the lists.
This way weston_output_enable() does not need to remove and
oops-it-failed-add-it-back. weston_output_disable() does not need to
manually re-add the output back to the pending list.
To make everything nicely symmetric and fix any unbalancing caused by
this:
- weston_output_destroy() explicitly wl_list_remove()s
- weston_compositor_add_pending_output() first removes then inserts, as
we have the assumption that the link is always valid, even if empty.
Update the documentations, too.
v2:
- talk about "list of enabled outputs"
- keep wl_list_remove in weston_compositor_remove_output in its old
place
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Alexandros Frantzis
Matt Hoosier
Pekka Paalanen
Ian Ray
Fabien Lahoudere
Eric Engestrom
Ucan, Emre (ADITG/SW1)
Michael Teyfel
Quentin Glidic
Daniel Stone
Arnaud Vrac
Bryce Harrington
Philipp Kerling
Derek Foreman