The third arg to strtol() specifies the base to assume for the number.
When 0 is passed, as is currently done in option-parser.c, hexadecimal
and octal numbers are permitted and automatically detected and
converted.
This change is an expansion of f6051cbab8
to cover the remaining strtol() calls in Weston, where the routine is
being used to read fds and pids - which are always expressed in base-10.
It also changes the calls in config-parser, used by
weston_config_section_get_int(), which in turn is being used to read
scales, sizes, times, rates, and delays; these are all expressed in
base-10 numbers only.
The benefit of limiting this to base-10 is to eliminate surprises when
parsing numbers from the command line. Also, by making the code
consistent with other usages of strtol, it may make it possible to
factor out the common code in the future.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Improve error checking for situations like RDP_FD=42foo, or where the
provided number is out of range.
Suggestion by Yong Bakos.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
strtoul(nptr, endptr, ...) will set *endptr to nptr in the case of where
no digits were read from the string, and return 0. Running with
RDP_FD=foo would thus result in fd=0 being specified to
freerdp_peer_new(), which is unlikely to be the user's intent.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Current code flushes the connection when it receives
a delete window request. This means that a destroyed
window will remain available when X11 output gets
removed differently (ie, from a testing module).
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This patch makes use of new flags which were introduced
by previous patches to check if a surface/view is mapped
v2:
- Rebased to apply on git master
- Added comments with link to discussion about proposed
changes for weston_{surface,view}_is_mapped()
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Currently, weston assumes a surface/view is mapped if
it has an output assigned. In a zero outputs scenario,
this isn't really desirable.
This patch introduces a new flag to weston_surface and
weston_view, which has to be set manually to indicate
that a surface/view is mapped.
v2:
- Remove usage of new flags from
weston_{view,surface}_is_mapped at this point. They
will be added after all the implicit mappings have
been introduced
- Unmap a surface before unmapping a view so the input
foci is cleaned up properly
- Remove implicit view mapping from view_list_add
- Cosmetic fixes
v3:
- Rebased to apply on git master
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This patch follows a similar approach taken to detach the backends from
weston. But instead of passing a configuration struct when loading the
plugin, we use the plugin API registry to register an API, and to get it
in the compositor side. This API allows to spawn the Xwayland process
in the compositor side, and to deal with signal handling. A new
function is added in compositor.c to load and init the xwayland.so
plugin.
Also make sure to re-arm the SIGUSR1 when the X server quits.
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
[Pekka: moved xwayland/weston-xwayland.c -> compositor/xwayland.c]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Implement a simple register and lookup for function tables. This is
intended for plugins to expose APIs to other plugins.
It has been very hard to arrange a plugin to be able to call into
another plugin without modifying Weston core to explicitly support each
case. This patch fixes that.
The tests all pass.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Place it with the other weston_seat functions.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The name suggests that it activates surfaces, but the code says it
rather just assigns keyboard focus. Rename it for clarity, and so the
original function name could be used for something more appropriate
later. Switch order of parameters since keyboard focus is a property of
the seat. Update all callers as appropriate.
Change was asked for by pq, May 26, 2016:
"This should be called weston_seat_set_keyboard_focus(seat, surface).
Keyboard focus is a property of the seat."
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Currently, the gl-renderer setup is being done on per-output
basis. This isn't desirable when trying to make weston run
with zero outputs.
When there are no outputs present, there is no surface available
to attach an EGLContext to with eglMakeCurrent, which makes
any EGL command fail.
The problem is solved by using EGL_KHR_surfaceless_context to
bind an EGLContext to EGL_NO_SURFACE, or if that is
unavailable, creating a dummy PbufferSurface and binding an
EGLContext to it, so EGL gets set up properly.
v2:
- Move PbufferSurface creation into its own function
- Introduce a new EGLConfig with EGL_PBUFFER_BIT set
and use it to create a PbufferSurface
- Make PbufferSurface attributes definition static
- Check for return of gl_renderer_setup and terminate
in case it fails
- Remove redundant gl_renderer_setup call from
gl_renderer_output_create
- Only destroy the dummy surface if it is valid
This patch causes a warning from Mesa when using the i965 driver:
libEGL warning: FIXME: egl/x11 doesn't support front buffer rendering.
A bug has been filed about it since it seems to be spurious:
https://bugs.freedesktop.org/show_bug.cgi?id=96694
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
[Pekka: filed a Mesa bug and added the note in commit msg]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This patch adds a new command line option which can be
used to tell headless backend not to create any
virtual outputs.
This will be used for output hotplug emulation, where
weston will start with no outputs available, and the
virtual output will be created at runtime.
v2:
- Use bool instead of int for the indicator flag
- Move final newspace to a separate line in command
line options
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
sprintf can overflow the fixed length title which is char[32]. This
patch change title to dynamically allocated char array using asprintf or
strdup. If one of them fail we leave returning NULL to indicate the
failure.
Signed-off-by: Benoit Gschwind <gschwind@gnu-log.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Tested-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
This clarifies what is supposed to be the libweston code.
v2: screen-share.c is already in compositor/ instead.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Benoit Gschwind <gschwind@gnu-log.net>
Acked-by: Benoit Gschwind <gschwind@gnu-log.net>
[Pekka: rebased]
Bryce Harrington
Armin Krezović
Giulio Camuffo
Pekka Paalanen
Benoit Gschwind