This patch gathers all values to be loaded to shader uniforms into a new
struct gl_shader_config along with texture target and filter
information. Struct gl_shader becomes opaque outside of gl-shaders.c.
Everything that used or open-coded these are converted.
The aim is to make gl-renderer.c easier to read. Previously, uniform
values were loaded up in various places, texture units were set up in
one place, textures were bound into units in different places. Stuff was
all over the place.
Now, shader requirements and associated uniform data is stored in a
single struct. The data is loaded into a shader program in one function
only.
That makes it easy for things like maybe_censor_override() to replace
the whole config rather than poke only the shader requirements. This may
not look like much right now, but when color management adds more
uniforms and even hardcoded color need to go through the proper color
pipeline, doing things the old way would become intractable.
Similar simplification can be seen in draw_view(), where the RGBA->RGBX
override becomes more contained. There is no longer a need to "pre-load"
the shader used by triangle fan debug. Triangle fan debug no longer
needs to play tricks with saving and restoring the current shader.
The real benefit of this change will probably come when almost all
shader operations need to take color spaces into account. That means
filling in gl_shader_config parts based on a color transformation.
This is based on an idea Sebastian already used in his Weston color
management work.
Co-authored-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
These functions are related to shaders, so they are more at home in
gl-shaders.c. gl-renderer.c is too long already.
This allows making a couple functions static while the moved functions
become non-static. Future changes turn some of these functions into
static again, with the ultimate goal of making struct gl_shader opaque.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This adds a heuristic for freeing shader programs that have not been
needed for a while. The intention is to stop Weston accumulating shader
programs indefinitely, especially in the future when color management
will explode the number of possible different shader programs.
Shader programs that have not been used in the past minute are freed,
except always keep the ten most recently used shader programs anyway.
The former rule is to ensure we keep shader programs that are actively
used regardless of how many. The latter rule is to prevent freeing too
many shader programs after Weston has been idle for a long time and then
repaints just a small area. Many of the shader programs could still be
relevant even though not needed in the first repaint after idle.
The numbers ten and one minute in the above are arbitrary and not based
on anything.
These heuristics are simpler to implement than e.g. views taking
references on shader programs. Expiry by time allows shader programs to
survive a while even after their last user is gone, with the hope of
being re-used soon. Tracking actual use instead of references also
adapts to what is actually visible rather than what merely exists.
Keeping the shader list in most recently used order might also make
gl_renderer_get_program() more efficient on average.
last_repaint_start time is used for shader timestamp to avoid calling
clock_gettime() more often. Adding that variable is an ABI break, but
libweston major has already been bumped to 10 since last release.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is useful for seeing that the shader program garbage collection
works in a future patch.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
One more thing is coming to need this, so add the compositor pointer and
migrate existing places to use it where it simplifies things.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Proper color management will need blending done with linear light pixel
values, that is, EOTF applied before blending, and then inverse-EOTF
applied for scanout after blending. The simplest way to set that up is
to use an intemediate framebuffer a.k.a shadow buffer containing the
composited image in linear light values, then blit from that to the
actual framebuffer.
This patch implements the shadow buffer, but the linear light
blending is left for another patch. This allows GL-renderer to turn
WESTON_CAP_COLOR_OPS on.
Half-float is chosen as the buffer format because linear light values
require more bits to encode with sufficient precision than the usual
non-linear pixel values.
v2: Use /* */ instead of // (Pekka)
Rename fbo and tex to shadow_{fbo,tex} (Pekka)
Check for OpenGLES capabilities before creating
shadow_{tex,fbo} (Pekka)
Signed-off-by: Harish Krupo <harishkrupo@gmail.com>
v3: Rebased.
Simplified GL version checks (Sebastian)
Apply changes from "libweston: add color ops cap and bool renderer
shadow buffer"
Renamed supports_half_float_texture to has_gl_half_float to
follow the existing naming pattern.
Introduce gl_renderer_create_shadow_16f().
Undo moving of glViewport() call.
Replace half_float_texture_enabled with shadow_exists().
Introduce struct gl_output_state_shadow.
Assert no resizing with shadow.
Fix triangle fan debug.
Rename repaint_from_texture() to blit_shadow_to_output().
Rewrite commit message because linear light blending is not
implemented in this patch.
Fix blit_shadow_to_output() for scaled/transformed outputs and
remove redundant code.
Fix has_gl_half_float determination.
v4: Disable blending in blit_shadow. (Daniel)
Port to gl_renderer_get_program().
Make a generic fbo-texture struct with parameterized format. (Daniel)
Change has_gl_half_float into gl_half_float_type.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This helps accounting how many shaders live in the cache, what the
shader source code is, and when shaders are compiled.
Signed-off-by: Harish Krupo <harishkrupo@gmail.com>
v2: Resolved rebase conflicts.
Put shader_scope in struct gl_renderer, remove struct
gl_shader_generator.
Wrote commit message.
Rebased for "gl-renderer: rewrite fragment shaders" which completely
changed how shader sources are generated.
Added cache statistics to debug output on subscribe.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
If shader compiling on demand fails, then rather than using whatever
random shader happens to be current, use an explicit fallback shader
painting stuff brown.
The color is chosen dim enough to hopefully not cause problems even in
a HDR setting as it will be written verbatim into the fb/shadow.
This also prevents NULL dereference on shader->key.variant in
draw_view().
One way to test this shader is to hack fragment.glsl:
#if DEF_VARIANT == SHADER_VARIANT_EXTERNAL
#extension GL_OES_EGL_image_external : require
+#error haa haa
#endif
and then run e.g. weston-simple-dmabuf-v4l -f YUYV
with vivid kernel module loaded. This worked on Intel.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This patch modifies the shader generation code so that the shaders are
stitched together based on the requirement instead of creating them
during initialization. This is necessary for HDR use cases where each
surface would have different properties based on which different
de-gamma or tone mapping or gamma shaders are stitched together.
v2: Use /* */ instead of // (Pekka)
Move shader strings to gl-shaders.c file (Pekka)
Remove Makefile.am changes (Pekka)
Use a struct instead of uint32_t for storing requirements (Pekka)
Clean up shader list on destroy (Pekka)
Rename shader_release -> shader_destroy (Pekka)
Move shader creation/deletion into gl-shaders.c (Pekka)
Use create_shaders's multi string capbility instead of
concatenating (Pekka)
v3: Add length check when adding shader string (Pekka)
Signed-off-by: Harish Krupo <harishkrupo@gmail.com>
v4: Rebased, PROTECTION_MODE_ENFORCED converted.
Dropped unnecessary { }.
Ported setup_censor_overrides().
Split out moving code into gl-shaders.c.
Changed to follow "gl-renderer: rewrite fragment shaders",
no more shader source stitching.
Added SHADER_VARIANT_XYUV.
Const'fy function arguments.
Added gl_shader_requirements_cmp() and moved the early return in
use_gl_program().
Moved use_gl_program() before first use in file.
Split solid shader requirements by use case: requirements_censor and
requirements_triangle_fan.
Simplified fragment_debug_binding() since no need to force anything.
Ensure struct gl_shader_requirements has no padding. This allows us
to use normal C syntax instead of memset() and memcpy() when
initializing or assigning. See also:
https://gitlab.freedesktop.org/mesa/mesa/-/issues/2071
Make it also a bitfield to squeeze the size.
v5: Move wl_list_insert() into gl_shader_create() (Daniel)
Compare variant to explicit value. (Daniel)
Change functions to gl_renderer_get_program,
gl_renderer_use_program, and
gl_renderer_use_program_with_view_uniforms.
Use local variable instead of gr->current_shader. (Daniel)
Simplified gl_renderer_get_program.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is purely moving code as is with no changes other than making the
three functions non-static.
Originally this was part of "gl-renderer: Requirement based shader
generation" by Harish Krupo, but that patch made also big changes to the
code at the same time. Patches are easier to review when code movement
is separate from behavioral changes, therefore I introduced this patch.
Cc: Harish Krupo <harishkrupo@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Require GL_EXT_unpack_subimage unconditionally in GL-renderer. Without
this extension, it would take considerable effort in GL-renderer to
handle correctly images that contain row padding, either as a temporary
copy to remove padding or doing SubImage updates row by row.
I would guess that this path has gone long completely untested, and if
it was exercised, the rows never had padding thanks to 32-bit pixel
formats. Instead of writing tests to poke the corner cases and fixing
it, remove it.
This will make it easier to fix other problems in GL-renderer in this
area in the future - one less path to consider and many restrictions in
GL API gone.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Using the number of planes to determine if GL_TEXTURE_EXTERNAL_OES should be
used is incorrect with some modifiers: For example RGBA with a
I915_FORMAT_MOD_Y_TILED_CCS modifier has two planes.
Use eglQueryDmaBufModifiersEXT() to query if the current format/modifier only
supports GL_TEXTURE_EXTERNAL_OES.
Use the current code as fallback of modifiers are not supported.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
This is to put more of the EGL client extension handling in the same
place. This also adds a boolean to check if EGL_EXT_platform_base is
supported, similar to other extensions we check.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
EGL client extensions are not tied to the EGLDisplay we create, and have
an effect on how we create the EGLDisplay. Since we're using this to
look for EGL_EXT_platform_base, it makes more sense for this to be near
the start of the GL renderer initialization.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
Accept XYUV dmabuf buffers that a client application such as
weston-simple-dmabuf-v4l might submit.
v2 (Daniel):
Add XYUV to yuv_formats array to have the compositor color convert
with a shader if GL_TEXTURE_EXTERNAL_OES does not work.
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Fold more code into the common config choosing, the pbuffer path this time.
Simplifies code and allows gl_renderer_get_egl_config() to grow smarter in the
future to guarantee config compatility in the absence of configless_context
extension.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Now that all backends pass in a list of acceptable DRM formats, that is used to
determine if the EGLConfig has an alpha channel or not. Therefore the
opaque_attribs and alpha_attribs are now useless, and we can remove the whole
config_attribs argument from the API.
gl_renderer_get_egl_config() uses an internal attrib list that matches at least
the union of the opaque_attribs and alpha_attribs matches.
Overall, behaviour should remain unchanged.
The new attribute array becomes variable in the future, so it is left
non-const.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Implement fuzzy EGLConfig pixel format matching, where we ensure that R, G, B
and A channels have the expected number of bits exactly. This is used on EGL
platforms where the EGLConfig native visual ID is not a DRM format code. On EGL
GBM platform, the old exact matching of native visual ID is kept.
As only the DRM backend uses a DRM format list for picking a config, this patch
should not change any behaviour.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Using arrays of pixel_format_info instead of just DRM format codes is useful
for fuzzy matching of formats with EGLConfigs in the future. The immediate
benefit is that we can easily print format names in log messages.
We should never deal with formats we don't have in our database, so discarding
unknown formats should be ok. Using unknown formats would become hard later,
too.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
In an attempt to pull more of EGLConfig choosing into one place, refactor code
into the new gl_renderer_get_egl_config(). The purpose of this function is to
find an EGL config that not only satisfies the requested attributes and the
pixel formats if given but also makes sure the config is generally compatible
with the single GL context we have.
All this was already checked in gl_renderer_create_window_surface(), but
gl_renderer_create_pbuffer_surface() is still missing it. This patch is
preparation for fixing the pbuffer path.
We explicitly replace visual_id with drm_formats, because that is what they
really are. Only the DRM backend passes in other than NULL/0, and if other
backends start caring about the actual pixel format, drm_format is the lingua
franca.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Start a new source file for EGL glue stuff, for the EGL platform Weston runs
on. gl-renderer.c is getting too long, and I want to add even more boring code
(config pretty-printing etc.).
This pure code move, no changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Pekka Paalanen
Harish Krupo
Michael Olbrich
Scott Anderson
Vivek Kasireddy
Eero Tamminen