Fixes:
../shared/os-compatibility.c:273:25: error: ‘PROT_READ’ undeclared (first use in this function); did you mean ‘LOCK_READ’?
map = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_SHARED, file->fd, 0);
^~~~~~~~~
LOCK_READ
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
When using weston-launch launcher deactivating the VT is sometimes
racy and leads to Weston still being displayed. The launcher-direct.c
backend makes sure that the session signal is emitted first, then DRM
master is dropped and finally the VT switch is acknowledged via
VT_RELDISP.
However, in the weston-launch case the session signal is emitted via
a socket message to the weston process, which might get handled a bit
later. This leads to dropping DRM master and acknowledging the VT
switch prematurely.
Add a socket message which allows weston to notify weston-launch that
the signal has been emitted and deactivating can be proceeded.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
On weston-launch exit we see errors such as:
failed to restore keyboard mode: Invalid argument
failed to set KD_TEXT mode on tty: Invalid argument
This has been resolved by making sure the tty file descriptor
does not get closed. However, the ioctrl's KDSKBMODE/KDSETMODE
and VT_SETMODE still fail with -EIO:
failed to restore keyboard mode: Input/output error
failed to set KD_TEXT mode on tty: Input/output error
It turns out the reason for this lies in some very particular
behavior of the kernel, the separation of weston-launch/weston
and the fact that we restore the tty only after the weston
process quits: When the controlling process for a TTY exits,
all open file descriptors for that TTY are put in a hung-up
state! For more details see this systemd-logind issue:
https://github.com/systemd/systemd/issues/989
We can work around by reopening the particular TTY. This allows
to properly restore the TTY settings such that a successive VT
switch will show text terminals fine again.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Since weston-launch is a setuid-root program we should be extra careful:
Check for a potential string trunction. Move the check in a separate
function and return with error in case trunction has happened.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Currently weston-launch does not activate the VT when opening the
terminal directly (e.g. using --tty=/dev/tty7). Weston takes full
control over the terminal by switching it to graphical mode etc.
However, the old VT stays active as can be seen when looking at
sysfs:
# cat /sys/class/tty/tty0/active
tty1
Always switch to the new VT to make sure the correct VT is active.
This aligns with how TTY setup is implemented in launcher-direct.c.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Add newline character at the end of the error message to make sure we
get a new line after this error has been printed.
Fixes: a1450a8a71 ("make error() portable")
Signed-off-by: Stefan Agner <stefan@agner.ch>
In case an user is given but no tty, the code opens tty0 to allocate a
new tty. With that ttynr is known.
In case a tty name is given the user must be given too. In this case
we later recover the ttynr by using stat on the file tty file descriptor
which allows as to find the ttynr by looking at the devices minor number.
However, the third case, when no user and no tty name is given, we do
not get the ttynr.
This hasn't been a problem in practise since ttynr has not been used.
However, it makes sense to get the ttynr always for consistency. Also
upcomming fixes will start to make use of ttynr.
Fixes: 636156d5f6 ("weston-launch: Don't start new session unless -u is given")
Signed-off-by: Stefan Agner <stefan@agner.ch>
The tty file descriptor is used in signal handling (when switching
VT via SIGUSR1/SIGUSR2 for the VT_RELDISP ioctrl) and in quit() when
weston-launch exits for the KDSKBMUTE/KDSKBMODE/KDSETMODE/VT_SETMODE
ioctrls.
This fixes VT switching when using weston-launch from a non-VT shell
(e.g. ssh or from within a container).
Signed-off-by: Stefan Agner <stefan@agner.ch>
Move xwayland test to the new harness.
This is the only test that can actually skip. It does it by exit(77) and that
is fine, because there is only one test case in the file so far. To get rid of
the exit() calls we need to return a value from the TEST() function but that is
a big surgery for another time.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This migrates all the client tests that have nothing special in them to the new
test harness.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The devices test was actually using the defaults instead of
weston-test-desktop-shell in meson.build, so this patch keeps it that way.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
All plugin tests have been converted to the new harness, so the old definition
can be removed.
The one remaining test surface-screenshot is a manual test, the plugin only
installs a debug key binding. Hence it is open-coded as a normal plugin, not as
a test.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Moving to the new test harness.
Carrying the test ini file still just to keep it the same even though I
accidentally noticed the test succeeds also with --no-config.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Moving to the new harness.
It would be possible to convert every case here into a separate PLUGIN_TEST,
but I did not see the value in that at this time.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The ivi-layout-test comprises of two halves: the client and the plugin. This
migrates the test to the new test harness.
In the old harness, the plugin was built as the test in meson.build and it fork
& exec'd the client part. In the new harness client tests start from the client
program which sets up the compositor in-process, so now the client is built as
the test in meson.build and the plugin is just an additional file.
Therefore there is not need for the plugin for fork & exec anything anymore, so
all that code is removed.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
These are the only remaining standalone non-ZUC tests. They do not need any
changes to be built with the new harness - in fact they have already been
running through the new harness.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Instead of relying on Meson setting up environment so that Weston and tests
find all their files, build those values into the tests. This way one can
execute a test program successfully wihtout Meson, simply by running it.
The old environment variables are still honoured if set. This might change in
the future.
Baking the source or build directory paths into the tests should not regress
reproducible builds, because the binaries where test-config.h values are used
will not be installed.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This replaces the old test harness with a new one.
The old harness relied on fork()'ing each test which makes tests independent,
but makes debugging them harder. The new harness runs client code in a thread
instead of a new process. A side-effect of not fork()'ing anymore is that any
failure will stop running a test series short. Fortunately we do not have any
tests that are expected to crash or fail.
The old harness executed 'weston' from Meson, with lots of setup as both
command line options and environment variables. The new harness executes
wet_main() instead: the test program itself calls the compositor main function
to execute the compositor in-process. Command line arguments are configured in
the test program itself, not in meson.build. Environment variables aside, you
are able to run a test by simply executing the test program, even if it is a
plugin test.
The new harness adds a new type of iteration: fixtures. For now, fixtures are
used to set up the compositor for tests that need a compositor. If necessary, a
fixture setup may include a data array of arbitrary type for executing the test
series for each element in the array. This will be most useful for running
screenshooting tests with both Pixman- and GL-renderers.
The new harness outputs TAP formatted results into stdout. Meson is not
switched to consume TAP yet though, because it would require a Meson version
requirement bump and would not have any benefits at this time. OTOH outputting
TAP is trivial and sets up a clear precedent of random test chatter belonging
to stderr.
This commit migrates only few tests to actually make use of the new features:
roles is a basic client test, subsurface-shot is a client test that
demonstrates the fixture array, and plugin-registry is a plugin test. The rest
of the tests will be migrated later.
Once all tests are migrated, we can remove the test-specific setup from
meson.build, leaving only the actual build instructions in there.
The not migrated tests and stand-alone tests suffer only a minor change: they
no longer fork() for each TEST(), otherwise they keep running as before.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Allow to set and get one opaque pointer. The test suite will then use this to
pass data from the test runner to the test plugin, so that the plugin can then
run what it needs to. This is useful when the test runner calls wet_main()
directly instead of forking a compositor.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The only reason why we have both weston_compositor_tear_down() and
weston_compositor_destroy() is that the only we had to destroy
the log context was keeping weston_compositor alive and calling
weston_log_ctx_compositor_destroy().
After commit "weston-log: replace weston_log_ctx_compositor_destroy()
by weston_log_ctx_destroy()", it's not necessary to keep a zombie
weston_compositor just to be able to call
weston_log_ctx_compositor_destroy().
Fold weston_compositor_tear_down() into weston_compositor_destroy(),
as this split is useless now.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
The function weston_log_ctx_compositor_destroy(), which destroys struct
weston_log_context, takes weston_compositor as argument. We may have a
weston_log_context unlinked from a weston_compositor and currently there
is no way to destroy it.
Add function weston_log_ctx_destroy(), what makes the destruction of
weston_log_context independent of weston_compositor.
With this change, one could destroy a weston_compositor and keep the
related weston_log_context (since now weston_log_context can be destroyed
without the need of a weston_compositor). But if weston_compositor gets
destroyed it's also necessary to destroy weston_log_context::global,
as the debug protocol depends on the compositor. So a listener has been
added to the destroy signal of weston_compositor.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Since weston_log_ctx_compositor_create() does not have any relation
with weston_compositor, rename it to weston_log_ctx_create().
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
The function weston_log_ctx_compositor_setup() is being called only inside
weston_compositor_create() and it is so tiny that the code gets easier to
follow if it gets folded in weston_compositor_create().
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
For certain cases when using vivid module, some display-controllers
require to allocate the dmabuf in a contiguous fashion so explain that
to the user when adding details about vivid module.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Makes use of weston-direct-display protocol to pass the dmabuf
straight to the display-controller if such a path is possible.
Removes the Y_INVERT flag in case that was passed, and notifies
the user about it, as the weston implementation would force going
through the renderer when passing the Y_INVERT flag, but in the same
time direct-display avoids any GPU import so having them both in the
same time would result into weston refusing the create a buffer.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Allow clients to pass Y_INVERT, not only when v4l reports it so.
Document it briefly and add a note about this Y_INVERT flag is passed
if the camera sensors is detected as being y-flipped.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Makes adding further flags/options/args much easier.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We're missing format checks and still using first version of
zwp_linux_dmabuf protocol. Use the latest release and check that the
advertised formats/modifier accepts the user-supplied requested DRM
format.
Accept the format only if the modifier is LINEAR (@emersion).
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
There is more state than just the application window width and height that
affects whether calling weston_wm_window_configure() is necessary: everything
that affects the frame window, fullscreen state in particular. Therefore do not
skip the call by just width and height.
If send_configure() happens to be called "unnecessarily", this will now forward
some of those calls to the X11 clients. However, since it uses an idle task, it
should not result in a flood at least. And if send_configure() is spammed,
maybe that should then be fixed in its callers.
This patch should fix the misplacement of a fullscreen X11 window due to the
frame window being incorrectly sized and positioned, and the app window
incorrectly positioned inside the frame window.
The fullscreen window problems were observed in a case where the window does
not hit legacy_fullscreen() but first maps and then sets
_NET_WM_STATE_FULLSCREEN. Additionally the initial window size must match the
output size where it gets fullscreened. In that case the frame window was left
as if not fullscreened.
This practically reverts 3f53d9179b. I'm not sure
what problem that patch was fixing, but I couldn't make any resizing freeze.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Spotted this in debug log:
[xwm-wm-x11] XWM: configure window 4194324: x=32 y=32 width=1920 height=1080 border_width=0 stack_mode=0
[xwm-wm-x11] XWM: configure window 0: width=1984 height=1144
Trying to configure window 0 makes no sense. So do not try.
To avoid patching two different places with the same thing, refactor the code
into a common helper.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
It would lead to use-after-free if there was a pending idle callback to
weston_wm_window_configure() when the weston_wm_window gets destroyed. Make
sure the callback will not fire.
Found by inspection.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This function is called also directly from weston_wm_window_set_toplevel(). If
configure_source is set at that point, simply resetting the pointer will "leak"
the source until it fires and calls this function again.
Let's keep the variable up-to-date by removing the source when called,
dispatched or not. This removes the second call. I only hope it doesn't cause
issues. This is also necessary if we intend to remove the source on window
destruction too.
Found by inspection.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
It looks like commit ad0da4596d introduced a bug
for X11 windows that are initially fullscreen by adding code to the end of
xserver_map_shell_surface() while ignoring the 'return' that this patch
removes. That may have caused some annoying window state issues, but the
problem became more pronounced with 7ace831ca6
when used with an Xwayland version that honours _XWAYLAND_ALLOW_COMMITS.
In the latter case, there is a possiblity the window will never show up, as XWM
forgets to set allow_commits=true. However, the window may sometimes actually
show up due to an oversight in Xwayland: the Present code may be flipping the
window buffers and not checking _XWAYLAND_ALLOW_COMMITS if it is supposed
commit at all.
Since then, f568968f8a added more places where
allow_commits is set to true, masking the window-does-not-show-up issue. Window
pending state likely still remained an issue.
This patch properly fixes the "window never appears" issue by making sure
allow_commit=true is set. At the same time, it ensures the pending state
functions are called at the end of xserver_map_shell_surface(), which may fix
some window state issues like misplaced decorations and/or position of
initially-fullscreen windows. Unfortunately, it certainly does not fix all such
state problems.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Commit "weston-log: add function to avoid direct
access to compositor members in non-core code" added the
function weston_compositor_add_log_scope mainly to allow
libweston users to avoid direct accessing core structs, as
weston_compositor.
Replace weston_log_context_add_log_scope usage by
weston_compositor_add_log_scope.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Commit "weston-log: add function to avoid direct
access to compositor members in non-core code" added the
function weston_compositor_add_log_scope mainly to allow
libweston users to avoid direct accessing core structs, as
weston_compositor.
Replace weston_log_context_add_log_scope usage by
weston_compositor_add_log_scope.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Commit "weston-log: add function to avoid direct
access to compositor members in non-core code" added the
function weston_compositor_add_log_scope mainly to allow
libweston users to avoid direct accessing core structs, as
weston_compositor.
Replace weston_log_context_add_log_scope usage by
weston_compositor_add_log_scope.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Commit "weston-log: add function to avoid direct
access to compositor members in non-core code" added the
function weston_compositor_add_log_scope mainly to allow
libweston users to avoid direct accessing core structs, as
weston_compositor.
Replace weston_log_context_add_log_scope usage by
weston_compositor_add_log_scope.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Commit "weston-log: add function to avoid direct
access to compositor members in non-core code" added the
function weston_compositor_add_log_scope mainly to allow
libweston users to avoid direct accessing core structs, as
weston_compositor.
Replace weston_log_context_add_log_scope usage by
weston_compositor_add_log_scope.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
If we use the function weston_log_context_add_log_scope()
in non-core code, it's necessary to access
weston_compositor::weston_log_ctx.
This is not ideal, since the goal is to make core structs
(weston_compositor, weston_surface, weston_output, etc)
opaque.
Add function weston_compositor_add_log_scope(), so non-core
users are able to pass weston_compositor as argument instead
of weston_compositor::weston_log_ctx.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
There's a function named weston_compositor_add_log_scope()
but it doesn't take a struct weston_compositor argument.
Rename it to weston_log_ctx_add_log_scope(), as
the log_scope is being added to a log_context.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Meson's warning level maps to -Wall, -Wextra and -Wpedantic.
-Wmissing-prototypes is added by neither of those flag. Consequently,
it is manually added to the build command line arguments.
Signed-off-by: Guillaume Champagne <champagne.guillaume.c@gmail.com>
Fixes missing prototypes compilation warnings emitted when a function
is defined before its prototype is declared.
These warnings were introduced over time since the switch to meson
because the -Wmissing-protoypes was not included in the compilation
arguments.
Signed-off-by: Guillaume Champagne <champagne.guillaume.c@gmail.com>
James Hilliard
Stefan Agner
Pekka Paalanen
Leandro Ribeiro
Marius Vlad
Guillaume Champagne