Whether a input method is used should be the responsibility
of the shell because some shells may not want to implement
an input method at all
Signed-off-by: Murray Calavera <murray.calavera@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Do not use a black blanket surface when the startup animation is
specified to be "none". This is the final fix needed to make the
screenshot test deterministic and independent of weston-desktop-shell.
Previously, the black surface would cover all outputs until
weston-desktop-shell signalled ready. Then, depending on the set
animation, either the black surface was immediately removed (none) or a
fade-in started (fade).
Now, when there is no black surface at all for "none", the compositor
will show garbage until weston-desktop-shell gets everything up. This
may be undesireable but works for tests. To have the old "none"
behaviour back, I would propose to add a new startup-animation value
"black" for it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
It's possible for more than one animation to be taking place on a view at
the same time. If one of those animations is the shell's fade out for
dying surfaces, its completion handler will trigger the surface destroy
signal, causing other animations on the animation list to remove themselves.
Since this removal occurs during the linked list walk, the compositor may
crash.
We move the actual surface destruction into an idle handler to avoid this.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If the compositor has never seen a mouse, exposay will crash because
the seat->pointer pointer is NULL.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Weston has sent the first 'resizing' configure event with width=height=0.
But resizing to that size doesn't make sense.
Instead, we now send the current width and height of the surface at the beginning
of resizing.
Signed-off-by: Ryo Munakata <ryomnktml@gmail.com>
They are errors that may be as a result of calling get_xdg_popup on an
xdg_shell, not a result of calling a request on xdg_popup.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Require all child objects to be destroyed before the parent. In other
words, all popups and surfaces created by one xdg_shell instance needs
to be destroyed before the xdg_shell object, otherwise a protocol error
is raised.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The other set_focus() functions take the relevant type instead of a seat
already, so this is consistent.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Currently, the shell crashes if the parent is not a shell surface. Instead,
send an error to the client.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
All the surfaces from all the X clients share the same wl_client so
wl_client_get_credentials can't be used to get the pid of the X
clients.
The shell may need to know the pid to be able to associate a surface
with e.g. a DBus service.
[Pekka: fixed trivial merge conflicts.]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The "set_minimized(surface, 0)" function call was never
used anywhere, and not really respecting naming
conventions.
Signed-off-by: Manuel Bachmann <manuel.bachmann@open.eurogiciel.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Now clamping width and height to a minimum of 1, 1 when drag resizing.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
The code for the key binding that triggers debug key bindings, that is,
the code that makes mod+SHIFT+SPACE work, used to live in shell.c. I
want to make the debug key bindings available in ivi-shell too, so this
code should be shared. Move it to core.
The code was originally introduced in
commit c509d2b152
so update the copyright in binding.c to reflect that.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Send an invalid_parent error when the client tries to create a popup
with a paren that is neither a xdg_surface nor a xdg_popup.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Either in destroy or get_xdg_popup.
[jadahl: Verify that the new popup is the top most when mapping instead
of creating. Some renaming.]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
There haven't been any ideas for flags, so we don't need a useless,
unused parameter hanging around. Any future ideas should be done with a
new request entirely.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It doesn't serve any purpose, as it's a serial that the client gave to
the server when starting the popup, which the client already has.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Can just use wl_list_for_each_safe instead of dealing with pointers
ourself.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If a client calls xdg_shell.get_xdg_surface on a surface that is already
an xdg_surface would, prior to this patch, succeed, but cause weston to
crash later when trying to configure. This patch instead sends a role
error to the client complaining that it already is an xdg_surface.
Note that .._set_role() only fails when changing roles, not when setting
the same role twice.
The same is done for xdg_popup.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
This patch adds the maximize button to the window frame for the windows
which set the MWM_DECOR_MAXIMIZE hint, and it wires it with the shell
via a new method in weston_shell_interface.
Additionally, it also listens for the wm hints coming from the client,
but it doesn't support maximizing a window only vertically or horizontally.
The window will be maximized only when both directions are maximized.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Remove a few instances of casting weston_seat to weston_seat.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
The zoom effect zooms at the seat's current pointer location. When no
pointer is present the zoom key bindings cause a crash.
Instead, check for the absence of a pointer and log a warning.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Logging is activated and deactivated with the debug key binding 't'.
When activated, it creates a new log file, where it records the events.
The log file contains events and detailed object information entries in
JSON format, and is meant to be parsed in sequence from beginning to the
end.
The emitted events are mostly related to the output repaint cycle, like
when repaint begins, is submitted to GPU, and when it completes on a
vblank. This is recorded per-output. Also some per-surface events are
recorded, including when surface damage is flushed.
To reduce the log size, events refer to objects like outputs and
surfaces by id numbers. Detailed object information is emitted only as
needed: on the first object occurrence, and afterwards only if
weston_timeline_object::force_refresh asks for it.
The detailed information for surfaces includes the string returned by
weston_surface::get_label. Therefore it is important to set
weston_timeline_object::force_refresh = 1 whenever the string would
change, so that the new details get recorded.
A rudimentary parser and SVG generator can be found at:
https://github.com/ppaalanen/wesgr
The timeline logs can answer questions including:
- How does the compositor repaint cycle work timing-wise?
- When was the vblank deadline missed?
- What is the latency from surface commit to showing the new content on
screen?
- How long does it take to process the scenegraph?
v2: weston_surface::get_description renamed to get_label.
v3: reafctor a bit into fprint_quoted_string().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When printing out logs from Weston's actions, mainly for debugging, it
can be very difficult to identify the different surfaces. Inspecting
the configure function pointer is not useful, as the configure functions
may live in modules.
Add vfunc get_label to weston_surface, which will produce a short,
human-readable description of the surface, which allows identifying it
better, rather than just looking at the surface size, for instance.
Set the label function from most parts of Weston, to identify cursors and
drag icons, and panels, backgrounds, screensavers and lock surfaces, and
the desktop shell's application surfaces.
v2: renamed 'description' to 'label', so we get
weston_surface_set_label_func().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If a keyboard exists but it has no current focus, yet something asks the
input-panel to come up, we would crash here. Check that there is a focus
before attempting to use it.
Maybe there should not even exist a case where input-panel tries to come
up without a keyboard focus, but I am not sure there is no race where it
could happen.
In any case, this fix was brought up by the ivi-shell work, where I
suppose you can somehow hit it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cc: Tanibata, Nobuhiko <ntanibata@jp.adit-jv.com>
set_fullscreen has been sending configure before changing the state
and xwayland windows added border to the fullscreen size.
This fixes the bug:
https://bugs.freedesktop.org/show_bug.cgi?id=83502
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Ryo Munakata <ryomnktml@gmail.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This breaks weston_output_mode_switch() into 3 functions:
weston_output_mode_set_native()
weston_output_mode_switch_to_temporary()
weston_output_mode_switch_to_native()
Differences from previous behaviour:
SET_NATIVE didn't set current_scale (now it does)
SET_TEMPORARY could set mode and scale independently - now it can't.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Pekka Paalanen <pekka.paalanen@collabora.co.uk>
With the more accurate definition of wl_surface roles in Wayland,
enforce the restriction: a role is always set permanently, and
attempting to change it is a protocol error.
This patch is based on Jasper's patch:
http://lists.freedesktop.org/archives/wayland-devel/2014-August/016811.html
The difference in this patch compared to his are:
- send role errors on the interface whose request triggers it, not on
wl_surface
- an interface could have several requests assigning different roles,
cannot use wl_interface as the unique key; use an arbitary string
instead
- ensure in window-manager.c that create_shell_surface() ->
create_common_surface() is never called with surface->configure set,
to avoid compositor abort
- use wl_resource_post_no_memory() where appropriate instead of
hand-rolling it with wl_resource_post_error()
Ideally we would not add weston_surface::role_name field, but use
weston_surface::configure. At the moment this is not possible though,
because at least shell.c uses several different roles with the same
configure function. Drag'n'drop uses two configure functions for the
same role. The configure hook is also reset in several places,
which is not good for role tracking.
This patch overlooks the wl_surface roles assigned in privileged
extensions: screensaver, panel, background, lock, input panel.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Noticed while reading code, that create_common_surface() may return
NULL, and callers of its direct callers check for NULL, but the
intermediate function in between would crash.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Calling weston_output_mode_switch() with WESTON_MODE_SWITCH_RESTORE_NATIVE
will result in the mode being set "back" to the passed in mode - so the
passed mode should be the native mode.
Additionally, weston_output_mode_switch() should be called when
output->original_mode is non-NULL (which indicates we had a temporary
mode set). The comparison to current_mode results in a lot of
log chatter.
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
weston_surface_update_transform() no longer exists, except in comments.
Fix that.
[Pekka Paalanen: don't lose the full comment in compositor-drm.c.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Set the right position of maximized window. Up until now we ignored
output's "position" and were using only the working area
of output which is in output-relative coordinates. This led to
showing the maximized window always on the first output.
This, along with the previous patch, fixes
https://bugs.freedesktop.org/show_bug.cgi?id=82967
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
shsurf->output is the output that user expects the shell surface
is on. When maximizing, we don't have any explicit setting of the output
like in the case of fullscreening, so set the output to the one that
the surface is currently on. In the case that the surface is not mapped yet,
(if it ever happens) use the same heuristics as for fullscreening.
This fixes the size sent with configure event, when maximizing a window.
The size is now picked up by the correct output, but the maximized
window position is still wrong. [Pekka Paalanen]
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=82967
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Fix recently introduced compiler warnings:
desktop-shell/shell.c: In function 'shell_configuration':
desktop-shell/shell.c:588:10: warning: ignoring return value of
'asprintf', declared with attribute warn_unused_result [-Wunused-result]
src/screenshooter.c: In function ‘screenshooter_binding’:
src/screenshooter.c:291:10: warning: ignoring return value of
‘asprintf’, declared with attribute warn_unused_result [-Wunused-result]
src/text-backend.c: In function ‘text_backend_configuration’:
src/text-backend.c:944:10: warning: ignoring return value of ‘asprintf’,
declared with attribute warn_unused_result [-Wunused-result]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When client is lauched in fullscreen, it is placed on the
first output, because it is not mapped and
shell_surface_set_output() therefore sets default output.
Since we have no better way how to position newly created windows,
(http://lists.freedesktop.org/archives/wayland-devel/2014-May/thread.html#14568)
set the output to the one that has currently focus. Priority has
the touch focus, then pointer and then keyboard focus.
This fixes bug
https://bugs.freedesktop.org/show_bug.cgi?id=69780
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If a full screen program is fading out and a touch start happens, it
will result in a NULL pointer dereference when weston_touch_set_focus
tries to derefernce view->surface->resource.
Instead, this patch sets the focus to NULL, which should be the
same as if the program was destroyed during the touch anyway.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=78706
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If weston-desktop-shell dies soon after launch, or maybe cannot be
executed at all, let weston exit rather than letting the user stare at a
black screen.
But, do not exit weston, if weston-desktop-shell dies later, as the user
may already have apps open, and those apps would likely still function
correctly. This gives the user the opportunity to save his work and
close the apps properly.
This should make one class of "I see only black screen" failures obvious.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
The desktop shell plugin registers both a wl_client destroy signal
listener, and a sigchld handler, when launching weston-desktop-shell.
However, nothing guarantees in which order do the wl_client destructor
and the sigchld handler run.
Luckily, the sigchld handler cannot interrupt any code, because we
handle the signal via signalfd, which means it is handled like any event
in the compositor's main event loop.
Still, shell.c has a race, that when lost, can cause a crash, as
described in bug #82957.
If the sigchld handler happens to run first, it will try to launch a new
weston-desktop-shell without removing the destroy listener from the old
wl_client first. This leads to list corruption, that may cause a crash
when the old wl_client gets destroyed.
Simply removing the destroy listener in the sigchld handler is not
enough, because respawning sets shell->child.client pointer, and if
the wl_client destructor runs after, it will reset it to NULL.
OTOH, the wl_client destroy handler cannot reset shell->child.process,
because that would cause the sigchld handler in weston core to not find
the process tracker anymore, and report that an unknown process exited.
Turns out, that to make everything work, we would need to wait for both
the wl_client destructor and the sigchld handler to have run, before
respawn. This gets tricky.
Instead, solve the problem by removing shell->child.process. Use the new
weston_client_start() which automatically creates and manages the struct
weston_process. The shell does not need to know about the process exit,
it only needs to know about the client disconnect. Weston-desktop-shell
will never attempt to reconnect, and it would not work even if it did,
so disconnect is equivalent to weston-desktop-shell exiting.
This should permanently solve the race for weston-desktop-shell.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=82957
Cc: Boyan Ding <stu_dby@126.com>
Cc: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
In this case wl_client_add_destroy_listener() was called with a NULL
client, which is invalid.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
desktop shell and weston keyboard both refer to themselves prefixed by
LIBEXECDIR, however this is only valid once installed. make check will
currently either fail or run pre-existing versions.
This patch adds a way to override that location by setting the env var
WESTON_BUILD_DIR - which is then set by the test env script so make check
will test the versions in the build directory regardless of whether they're
installed or not.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Bryce Harrington
Murray Calavera
Pekka Paalanen
Derek Foreman
Michael Vetter
Ryo Munakata
Jonas Ådahl
Dima Ryazanov
Giulio Camuffo
Manuel Bachmann
Jasper St. Pierre
Pekka Paalanen
Marek Chalupa
Jonny Lamb
Arnaud Vrac
Ondřej Majerech