While it conceptually makes sense to put the x11 event handler
in the compositor "input" loop, the input loop is actually
dispatched in the middle of the frame repaint. When the
X11 event results in closing the compositor, this can cause
the current output to be destroyed just prior to trying to
process animations on it.
Closes bug: https://bugs.freedesktop.org/show_bug.cgi?id=81314
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Using the x11 output (maybe with others as well), weston would hang
when closing the output if the colord plugin is enabled.
The hang occurs in mutex lock in the output notifier handler because
the given GMutex value is incorrect.
This is because of a cast error, the type of container should be
"cms_output" and not "cms_colord".
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Richard Hughes <richard@hughsie.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Check the value of level before dividing 1 by it.
Signed-off-by: Carlos Olmedo Escobar <carlos.olmedo.e@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
PRESENTATION_FEEDBACK_KIND_ZERO_COPY is a flag that needs to be set for
each surface separately. Some surfaces may be zero-copy (as defined by
Presentation feedback) while some are not.
A complication with Weston is that a surface may have multiple views on
screen. All copies (views) of the surface are required to be zero-copy
for the ZERO_COPY flag to be set.
Backends set per-view feedback flags during the assing_planes hook, and
then Weston core collects the flags from all views of a surface.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Change weston_output_finish_frame() signature so that backends are
required to set the flags, that will be reported on the Presentation
'presented' event. This is meant for output-wide feedback flags. Flags
that vary per wl_surface are subject for the following patch.
All start_repaint_loop functions use the special private flag
PRESENTATION_FEEDBACK_INVALID to mark, that this call of
weston_output_finish_frame() cannot trigger the 'presented' event. If it
does, we now hit an assert, and should then investigate why a fake update
triggered Presentation feedback.
DRM:
Page flip is always vsync'd, and always gets the completion timestamp
from the kernel which should correspond well to hardware. Completion is
triggered by the kernel/hardware.
Vblank handler is only used with the broken planes path, therefore do
not report VSYNC, because we cannot guarantee all the planes updated at
the same time. We cannot set the INVALID, because it would abort the
compositor if the broken planes path was ever used. This is a hack that
will get fixed with nuclear pageflip support in the future.
fbdev:
No vsync, update done by copy, no completion event from hardware, and
completion time is totally fake.
headless:
No real output to update.
RDP:
Guessing that maybe no vsync, fake time, and copy make sense (pixels
sent over network). Also no event that the pixels have been shown?
RPI:
Presumably Dispmanx updates are vsync'd. We get a completion event from
the driver, but need to read the clock ourselves, so the completion time
is somewhat unreliable. Zero-copy flag not implemented though it would
be theoretically possible with EGL clients (zero-copy is a per-surface
flag anyway, so in this patch).
Wayland:
No information how the host compositor is doing updates, so make a safe
guess without assuming vsync or hardware completion event. While we do
get some timestamp from the host compositor, it is not the completion
time. Would need to hook to the Presentation extension of the host
compositor to get more accurate flags.
X11:
No idea about vsync, completion event, or copying. Also the timestamp is
a fake.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Mario Kleiner <mario.kleiner.de@gmail.com>
When a function is named drm_output_FOO(), you'd expect it to take a
struct drm_output * as an argument. Convert
drm_output_prepare_scanout_view(), drm_output_prepare_overlay_view(),
drm_output_prepare_cursor_view() from weston_output to drm_output.
Additionally convert drm_sprite_crtc_supported() from weston_output to
drm_output.
This change makes drm_assign_planes() to operate on drm_output terms,
which makes further changes a tiny bit easier.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
The current parser directly reads a BOOLEAN on the PropertiesChanged
signal for 'Active' properties. However, all property-values are packed in
a VARIANT, otherwise, we wouldn't know the type. Fix the parser to recurse
into the variant before reading the boolean.
To avoid such bugs in the future, we extract the 'Active' parser into a
helper function parse_active(), which is then shared between the
PropertiesChanged and Get handlers.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
Logind sends us a notification whenever the Active attribute of our session
changes. However, due to the way compositor-drm.c relies on the master DRM
device to be synced with the session, we used to delay Active=true
handling until the DRM device was up, too. See:
commit aedc7732eb
Author: David Herrmann <dh.herrmann@gmail.com>
Date: Sat Nov 30 11:25:45 2013 +0100
logind: delay wakeup until DRM-device is resumed
However, the other compositor backends do not use DRM, so logind-util will
never get notified about any DRM device. Therefore, we have to forward the
Active=true change immediately.
This commit fixes logind-util to take sync_drm as argument. If it is true,
we do DRM-device synchronisation, otherwise we don't.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=86889
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
xwayland uses SIGUSR1 as startup notification. Make sure to use SIGRTMIN
for VT handling to avoid conflicts.
A bonus is SIGRT* signals can be queued multiple times, so we will be able
to correctly track them and will no longer lose signals (which wouldn't
really matter, but is confusing in logs).
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
xwayland uses SIGUSR1 as startup notification. Make sure to use SIGRTMIN
and SIGRTMIN+1 for VT handling.
A bonus is SIGRT* signals can be queued multiple times, so we will be able
to correctly track them and will no longer lose signals (which wouldn't
really matter, but is confusing in logs).
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
libinput < 0.8 sent wheel click events with value 10. Since 0.8
the value is the angle of the click in degrees but it now provides
the click count as separate value. To keep backwards-compat with
existing clients, we just send multiples of the click count.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
libinput now provides a single event for scroll events. Extract the axes from
that event and split them into the wl events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
When the last pointer is removed from a seat, the pointer struct is
intentionally kept. This has some interesting side effects, so I've
documented it here so people like me don't errantly assume it's a bug.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
The assertion in x11_compositor_find_output() can trigger during normal
shutdown, for example, when moving the mouse while hitting a hotkey to
close the weston window.
Instead we can remove the assert(), return NULL, and discard events
we can't find a destination output for.
v2 Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
v1 Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A keyboard might not be present in a seat, so check that before
dereferencing keyboard related pointers.
Also, use the keyboard pointer we set to shorten the code a little bit.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jan Arne Petersen <janarne@gmail.com>
load_modules currently ignores errors signalled by both
weston_load_module and module_init, and instead always returns 0. Its
return value appears to be checked in callers, so we most likely want to
propagate any errors.
Signed-off-by: Ondřej Majerech <majerech.o@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The fd member of clipboard_source structure was not set
but was used in close().
v2. don't do unnecessary changes
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
There were unchecked malloc and no free for this memory.
Also simplify error handling in one function.
v2. remove check if memory is NULL, according to man pages,
free(NULL) is a no-op
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Logging is activated and deactivated with the debug key binding 't'.
When activated, it creates a new log file, where it records the events.
The log file contains events and detailed object information entries in
JSON format, and is meant to be parsed in sequence from beginning to the
end.
The emitted events are mostly related to the output repaint cycle, like
when repaint begins, is submitted to GPU, and when it completes on a
vblank. This is recorded per-output. Also some per-surface events are
recorded, including when surface damage is flushed.
To reduce the log size, events refer to objects like outputs and
surfaces by id numbers. Detailed object information is emitted only as
needed: on the first object occurrence, and afterwards only if
weston_timeline_object::force_refresh asks for it.
The detailed information for surfaces includes the string returned by
weston_surface::get_label. Therefore it is important to set
weston_timeline_object::force_refresh = 1 whenever the string would
change, so that the new details get recorded.
A rudimentary parser and SVG generator can be found at:
https://github.com/ppaalanen/wesgr
The timeline logs can answer questions including:
- How does the compositor repaint cycle work timing-wise?
- When was the vblank deadline missed?
- What is the latency from surface commit to showing the new content on
screen?
- How long does it take to process the scenegraph?
v2: weston_surface::get_description renamed to get_label.
v3: reafctor a bit into fprint_quoted_string().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When printing out logs from Weston's actions, mainly for debugging, it
can be very difficult to identify the different surfaces. Inspecting
the configure function pointer is not useful, as the configure functions
may live in modules.
Add vfunc get_label to weston_surface, which will produce a short,
human-readable description of the surface, which allows identifying it
better, rather than just looking at the surface size, for instance.
Set the label function from most parts of Weston, to identify cursors and
drag icons, and panels, backgrounds, screensavers and lock surfaces, and
the desktop shell's application surfaces.
v2: renamed 'description' to 'label', so we get
weston_surface_set_label_func().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When running a key binding we don't send the key press to the client
via the wl_keyboard.key event. Instead, send a wl_keyboard.leave/enter
pair so that the client knows the actual state of the keyboard.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
We don't care which box contained the point, so don't pass one in.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
calloc (and zalloc) set the allocated memory to 0, so there's really no
need to do it manually.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
[Pekka: dropped the src/evdev.c hunk.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
While the test is actually correct (for non-negative numbers), it's not
at all clear and seems to be an accidental order of operations mistake.
Also, add an assert() to make sure this number is never negative.
Closes bug 86346 - https://bugs.freedesktop.org/show_bug.cgi?id=86346
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
When getting the focus we get the list of pressed keys, but we are
not supposed to run the key binding on them.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
We now allow --transform with the headless compositor, however it still
doesn't parse anything out of weston.ini
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Allow the headless backend to render into an off screen buffer with pixman.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Weston's idle timeout can already be set via the '-i' command-line
option, but this patch lets users specify it also via weston.ini.
Note that the command-line option takes precedence over the .ini,
should the option be set by both.
This patch also Updates weston.ini man page with idle-timeout bits
https://bugs.freedesktop.org/show_bug.cgi?id=83921
Signed-off-by: Frederic Plourde <frederic.plourde@collabora.co.uk>
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
Pixman uses y-x banded rectangles to represent regions. We use these
y-x banded rectangles to generate triangle fans, resulting in more
geometry than strictly necessary to draw the screen.
This patch combines the bands to reduce geometry for complex scenes.
Acked-by: "Jasper St. Pierre" <jstpierre@mecheye.net>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Most of the backends do their own parsing of transform strings, so let's
put that all in the same place (compositor.c/h)
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This reverts commit 5c11fc6fb7.
According to two input specialists, this was the wrong way:
http://lists.freedesktop.org/archives/wayland-devel/2014-November/018287.html
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Giulio Camuffo <giuliocamuffo@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If there are several things that cause an exit, keep the error code from
the first one, not the last one. The latter ones could be just fallout
from the first.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Currently, once we've reached our main's wl_display_run(), we always
return ret=EXIT_SUCCESS when weston terminates through wl_display_terminate.
This patch makes it possible to specify another return value by setting
prior to terminating Weston. This is useful for automated tests that want
to report test failures to the overlying testing infrastructure.
Signed-off-by: Frederic Plourde <frederic.plourde@collabora.co.uk>
[Pekka: fixed some tabs.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
weston key bindings are supposed to eat the key events, and not pass it
on to clients, and indeed the wl_keyboard.key event is not sent. But
we must also not put the key in the keys array to pass to client with
the wl_keyboard.enter event, or else we may send the 'eaten' one too.
In the case of a key binding hiding a surface having the keyboard focus,
the shell may decide to give the focus to another surface, but that will
happen before the key is released, so the new focus surface will receive
the code of the bound key in the wl_keyboard.enter array.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Derek Foreman
Bryce Harrington
Olivier Fourdan
Lubomir Rintel
Carlos Olmedo Escobar
Pekka Paalanen
David Herrmann
Peter Hutterer
Giulio Camuffo
Ondřej Majerech
Marek Chalupa
Pekka Paalanen
nerdopolis
Frederic Plourde