Remoting plugin support streaming image of virtual output on drm-backend
to remote output. By appending remote-output section in weston.ini,
weston loads remoting plugin module and creates virtual outputs via
remoting plugin. The mode, host, and port properties are configurable in
remote-output section.
This plugin send motion jpeg images to client via RTP using gstreamer.
Client can receive by using following pipeline of gst-launch.
gst-launch-1.0 rtpbin name=rtpbin \
udpsrc caps="application/x-rtp,media=(string)video,clock-rate=(int)90000,
encoding-name=JPEG,payload=26" port=[PORTNUMBER] !
rtpbin.recv_rtp_sink_0 \
rtpbin. ! rtpjpegdepay ! jpegdec ! autovideosink \
udpsrc port=[PORTNUMBER+1] ! rtpbin.recv_rtcp_sink_0 \
rtpbin.send_rtcp_src_0 !
udpsink port=[PORTNUMBER+2] sync=false async=false
where, PORTNUMBER is specified in weston.ini.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Xwayland block SIGUSR1 signal for handling this signal. However, if some
weston plugins creates additional threads before xwayland is loaded,
this signal get delivered these threads and causes weston quit.
Therefore, we should set up SIGUSR1 blocking early so that these threads
can inherit the setting when created.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
We are currently formatting 32-bit signed integers into 8 byte buffers,
which are too small, causing the compiler to complain. Update the buffer
size to the minimum required value of 12 bytes: 1 for the sign, 10 for
the number, and 1 for the null byte terminator.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Keep non-desktop heads representing e.g. head mounted displays turned off by
default. When using the DRM backend they can still be enabled by setting an
explicit [output] mode (or "mode=preferred") in weston.ini.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Weston should not exit if stdin is a closed stream. This allows
to launch with a closed stdin:
# weston <&-
This fixes screen sharing using weston: Weston closes the stdin
before forking itself to execute the screen sharing instance of
weston. Before this patch screen sharing failed with:
Screen share failed: No wl_shm found
unknown child process exited
Fixes: f0d39b2243 ("weston: Set CLOEXEC on stdin")
Signed-off-by: Stefan Agner <stefan@agner.ch>
This is better than running Weston with WAYLAND_DEBUG=server:
- It is enabled on demand, no unnecessary flooding and no need to
restart the compositor if debug was enabled.
- It prints client pointers so that messages with different clients can
be seen apart.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
parse and print message arguments in protocol_log_fn
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This registers a new weston-debug scope "log" through which one can get
live log output interspersed with possible other debugging prints. This
is implemented by passing the format and varargs received in our usual
logging entrypoints through to the debug scope as well.
Anywhere where the varargs set is used twice (once for vfprintf, another
for the debug scope), we copy the va_list in order to avoid reusing it,
which leads to memory safety issues.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Let users enable the compositor debug protocol on the compositor command
line. This allows weston-debug tool to work.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We've always had "send_keymap" internally, but some places failed to use
it. Since we also use this in the text backend, export it.
Reviewed-by: Daniel Stone <daniels@collabora.com>
During de-init ensure removal of added signals from list. Otherwise
a dongling pointer is left behind which will affect other plugins.
Signed-off-by: Harsha M M <harsha.manjulamallikarjun@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The framebuffer backend now detects the framebuffer device
dynamically. Don't assume that the framebuffer device is /dev/fb0
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This allows the fbdev backend to run on, and use devices from the
specified seat, similar to the drm backend.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This will allow the seat to be set by the environment as pam_systemd typically
sets the XDG_SEAT variable
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Add a new boolean output section key "force-on". When set to true, the
output will be enabled regardless of connector status. This is the
opposite of the mode=off setting.
Forcing connectors on is useful in special circumstances: avoid output
configuration changes due to hotplug e.g. with KVM switches, or hardware
with unreliable connector status readout for example.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Add a new output section key "same-as" for configuring clone mode. An
output marked "same-as" another output will be configured identically to
the other output.
The current implementation supports only CRTC sharing for clone mode.
Independent CRTC clone mode cannot be supported until output layout
logic is moved from libweston into the frontend and libweston's damage
tracking issues stemming from overlapping outputs are solved.
Quite a lot of infrastructure is needed to properly configure clone
mode. The implemented logic allows easy addition of independent CRTC
clone mode once libweston supports it. The idea is that wet_layoutput is
the item to be laid out and all weston_outputs a wet_layoutput
contains show exactly the same area of the desktop.
The configuration logic attempts to automatically fall back to creating
more weston_outputs when all heads do not work under the same
weston_output. For now, the fallback path ends with an error message.
Enabling a weston_output is bit complicated, because one needs to first
collect all relevant heads, try to attach them all to the weston_output,
and then back up head by head until enabling the weston_output succeeds.
A new weston_output is created for the left-over heads and the process
is repeated.
CRTC-sharing clone mode is the most efficient clone mode, offering
synchronized scanout timings, but it is not always supported by
hardware.
v10:
- rebased trivial conflicts in man page
- switch to gitlab issue URL
v9:
- replace weston_compositor_set_heads_changed_cb() with
weston_compositor_add_heads_changed_listener()
- remove workaround in simple_head_enable()
v6:
- Add man-page note about cms-colord.
- Don't create an output just to turn it off.
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/22
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Now that WESTON_MODULE_MAP supersedes WESTON_BUILD_DIR for libexec
binaries, we don't need to check in WESTON_BUILD_DIR anymore.
There was only one user of weston_config_get_libexec_dir(), so remove
the whole function. There is no reason to export it.
Due to libshared.la being pulled into libweston, this probably was
libweston ABI unintended. Regardless, libweston major has already been
bumped.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Rather than having a hardcoded dependency on the build-directory layout,
use an explicit module-map environment variable, which rewrites requests
for modules and helper/libexec binaries to specific paths.
Pekka: This will help with migration to Meson where setting up the paths
according to autotools would be painful and unnecessary.
Emre: This should also help setting up the test suite after a
cross-compile.
Pekka: A caveat here is that this patch makes it slightly easier to load
external backends by abusing the module map. External backends are
specifically not supported in libweston.
Signed-off-by: Daniel Stone <daniels@collabora.com>
v2:
Fixed ivi_layout-test-plugin.c:wet_module_init().
Do not change the lookup name of ivi-layout.ivi.
Improved documentation of weston_module_path_from_env() and made it cope
with map strings that a) do not end with a semicolon, and b) have
multiple consecutive semicolons.
Let WESTON_MODULE_MAP be printed into the test log so that it is easier
to run tests manually.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Suggested by Emil: Use a variable for strlen(name).
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Triggered by weston --help, the usage() output should not look like an error.
Note that there is only one caller of usage() at the moment, but let's handle
this here based on the status in case we add other cases.
https://gitlab.freedesktop.org/wayland/weston/issues/112
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add an option to enable the touchscreen calibrator interface. This is a
global on/off toggle, in lack of more fine-grained access restrictions.
As Weston should not hardcode system specifics, the actual permanent
saving of a new calibration is left for a user supplied script or a
program. Usually this script would write an appropriate udev rule to set
LIBINPUT_CALIBRATION_MATRIX for the touch device.
Co-developed by Louis-Francis and Pekka.
v2:
- use syspath instead of devpath
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Allows to control the Pixman-renderer shadow framebuffer usage from
weston.ini. It defaults to enabled, and whether it is a good idea to
disable or not depends on the platform and the workload.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Rename user_data to wet, because it is called wet everywhere else.
Drop the local variable ec, because that is available as wet.compositor.
This models a little better that wet_compositor owns weston_compositor,
and not the other way around.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This makes it easier to just pass wet_compositor around and take the
weston_compositor from it.
It feels weird to go from weston_compositor to wet_compositor all the
time in internal functions. It's necessary in callbacks that cannot
carry wet_compositor, but otherwise it is awkward.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The signal has been replaced with the heads_changed hook and is no
longer useful.
weston_pending_output_coldplug() is renamed to
weston_compositor_flush_heads_changed() for two reasons: it better
describes what it does now, and it serves as an obvious flag that
libweston ABI has been broken.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Rename the function pointer to create_head() because that is what it
does on backends that are converted to the head-based API. Update the
documentation to match.
Surprisingly this is not an ABI break, as the function behaviour and
signature remain intact. Hence API_NAME is not bumped.
This is only an API break, and main.c is fixed accordingly.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the DRM frontend to use the simple head-based output
configurator, maintaining the exact same features and semantics as
before.
This is an intermediate step. It is unoptimal to create a weston_output
just to turn it off, but the libweston implementation and the DRM
backend require it for now. In the future, the DRM frontend will get its
own configurator that does not create useless weston_outputs and
supports clone mode by attaching multiple heads to the same
weston_output. Clone mode is not yet supported by libweston/DRM.
Until we remove the need to create a weston_output just to turn it
"off", that is, disable it, we will hit simple_head_enable() for heads
we have already disabled. As long as the DRM-backend conversion to the
head-based API is not complete, attempting to create an output for a
head again would lead to a crash. This problem does not exist right now,
but it will after the patch "compositor-drm: start migration to
head-based output API". Therefore, check if the head we are about to
process is already attached, and do nothing if so. DRM outputs set to
"off" are the only ones legitimately hitting this condition.
This is the last frontend migrated, wet_set_pending_output_handler() is
deleted as dead code.
v9:
- Add the workaround in simple_head_enable().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v6 Reviewed-by: Ian Ray <ian.ray@ge.com>
v7 Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the RDP frontend to use the new head-based output configuration
API: listen for heads_changed, and process all heads.
v7:
- remove unnecessary 'goto out' in load_rdp_backend()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the fbdev frontend to use the new head-based output
configuration API: listen for heads_changed, and process all heads.
v7:
- remove unnecessary 'goto out' in load_fbdev_backend()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the Wayland frontend to use the new head-based output
configuration API: listen for heads_changed, and process all heads.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the x11 frontend to use the new head-based output configuration
API: listen for heads_changed, and process all heads.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the headless frontend to use the new head-based output
configuration API: listen for heads_changed, and process all heads.
The simple_heads_changed() function is written to be able to cater for
all backends. The rest will be migrated individually.
The head destroy listeners are not exactly necessary, for headless
anyway, but this is an example excercising the API. Also
is_device_changed() check is mostly useful with DRM.
v8:
- replace weston_compositor_set_heads_changed_cb() with
weston_compositor_add_heads_changed_listener()
- fix comment on wet_head_tracker_create()
v3: Print "Detected a monitor change" only for enabled heads.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v6 Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Move the call out of wet_configure_windowed_output_from_config() and
into its callers.
This allows to migrate each frontend one by one.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
The 'head' member of 'struct weston_output' is going to go unused and
then disappear, so stop using it and find a head from the proper list.
However, this leaves a problem in cms-colord: if you have multiple
monitors driver with the same CRTC, what do you say to the color
management system? The monitors could be different, but all the color
LUTs etc. are in the CRTC and are shared, as is the framebuffer.
Do the simple hack here and just use whatever head happens to be the
first in the list.
The warning is printed in get_output_id(), because if heads are added or
removed while the output is enabled, the id could change.
v6:
- add weston_output_get_first_head(), at first use
- add warning message for nr. heads > 1
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
The user data of a wl_resource representing a wl_output protocol object
used to be a pointer to weston_output. Now that weston_output is being
split, wl_output more accurately refers to weston_head which is a single
monitor.
Change the wl_output user data to point to weston_head.
weston_output_from_resource() is replaced with
weston_head_from_resource().
This change is not strictly necessary, but architecturally it is the
right thing to do. In the future there might appear the need to refer to
a specific head of a cloned pair, for instance.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
In order to support clone modes, libweston needs the concept of a head
that is separate from weston_output. While weston_output manages buffers
and the repaint state machine, weston_head will represent a single
monitor. In the future it will be possible to have a single
weston_output drive one or more weston_heads for a clone mode that
shares the framebuffers between all cloned heads.
All the fields that are obviously properties of the monitor are moved
from weston_output into weston_head.
As moving the fields requires one to touch all the backends for all the
assingments, introduce setter functions for them while we are here. The
setters are identical to the old assignments, for now.
As a temporary measure, weston_output embeds a single head. Also the
ugly casts in weston_head_set_monitor_strings() will be removed by a
follow-up patch.
Libweston major version is bumped, because weston_output struct layout
is changed.
v7:
- Bump libweston major version.
v6:
- adapt to upstream changes in weston_output_set_transform()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
v6 Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Ensure the server can safely handle client requests for wl_seat resource
that have become inert due to weston_seat object release and subsequent
destruction.
The clean-up involves, among other things, unsetting the destroyed
weston_seat object from the user data of wl_seat resources, and handling
this NULL user data case where required.
The list of sites extracting and using weston_seat object from wl_seat
resources which were audited for this patch are:
Legend:
N/A = Not Applicable (not implemented by weston)
FIXED = Fixed in the commit
OK = Already works correctly
== keyboard_shortcuts_inhibit_unstable_v1 ==
[N/A] zwp_keyboard_shortcuts_inhibit_manager_v1.inhibit_shortcuts
== tablet_input_unstable_v{1,2} ==
[N/A] zwp_tablet_manager_v{1,2}.get_tablet_seat
== text_input_unstable_v1 ==
[FIXED] zwp_text_input_v1.activate
[FIXED] zwp_text_input_v1.deactivate
== wl_data_device ==
[FIXED] wl_data_device_manager.get_data_device
[OK] wl_data_device.start_drag
[FIXED] wl_data_device.set_selection
[OK] wl_data_device.release
== wl_shell ==
[FIXED] wl_shell_surface.move
[FIXED] wl_shell_surface.resize
[FIXED] wl_shell_surface.set_popup
== xdg_shell and xdg_shell_unstable_v6 ==
[FIXED] xdg_toplevel.show_window_menu
[FIXED] xdg_toplevel.move
[FIXED] xdg_toplevel.resize
[FIXED] xdg_popup.grab
== xdg_shell_unstable_v5 ==
[FIXED] xdg_shell.get_xdg_popup
[FIXED] xdg_surface.show_window_menu
[FIXED] xdg_surface.move
[FIXED] xdg_surface.resize
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Catching an ABRT is kind of ok, catching a SEGV is russian roulette. We
have been quite lucky with it, but I've started hitting crashes inside
malloc() which causes a deadlock when our SEGV handler needs to malloc()
as well (weston_log_timestamp()).
One reason to catch SEGV and ABRT was to attempt to restore the VT on
the DRM-backend. Nowadays that job is done by logind or weston-launch.
The signal handler also printed a backtrace, which for me personally has
been extremely helpful. Arguably it's not necessary though, when we have
core files and services that catch cores. For instance, if using
systemd, 'coredumpctl gdb' is delightfully easy for getting into the
saved core.
Therefore, this code does more harm than it is useful, so remove it. We
also drop an optional dependency to libunwind.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Developers with testing rigs having multiple graphics cards plugged in
often want to test things on a specific card. We have ways to choose a
card through seat assignments, but configuring that run by run is
awkward.
Add a command line option for opening a specific DRM device.
v2: call it --drm-device instead of --device
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Previously, the hide_input_panel and show_input_panel messages for the text
input protocol were limited to specific cases, such as showing the panel on
activation, or making the panel visible after activation. Now, clients are
allowed to toggle the panel visiblity at will as long as they are the currently
active client
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Tested-by: Silvan Jegen <s.jegen@gmail.com>
Reviewed-by: Jan Arne Petersen <janarne@gmail.com>
When you need to start Weston via weston-launch, systemd unit, or any
other runner, it is annoying to try to get in with a debugger,
especially if the thing you are interested in happens at start-up. To
make it easy, a new option is introduced.
The new option, implemented both as a command line option and a
weston.ini option, raises SIGSTOP early in the start-up, before the
weston_compositor has been created. This allows one to attach a debugger
at a known point in execution, and resume execution with SIGCONT.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Ian Ray <ian.ray@ge.com>
It is useful to print the backtrace regardless of whether we have a
compositor and a backend initialized yet. Move catch_signals() to the
earliest point in main() and protect the SEGV handler from dereferencing
NULL when we don't yet have a compositor or a backend.
The SEGV handler uses weston_log(), so cannot move catch_signals() any
earlier.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Change weston_compositor_get_time to return the current compositor time
as a struct timespec. Also, use clock_gettime (with CLOCK_REALTIME) to
get the time, since it's equivalent to the currently used gettimeofday
call, but returns the data directly in a struct timespec.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to key events to use struct timespec to represent
time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to axis events to use struct timespec to represent
time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to button events to use struct timespec to represent
time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to motion events to use struct timespec to represent
time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Surprisingly, WESTON_OPTION_BOOLEAN uses the type int32_t, not bool.
Passing in a pointer bool does not end well. Fix this to pass in
pointers as parse_options() expects.
This fixes a bug where 'weston --use-pixman --sprawl' would work but
'weston --sprawl --use-pixman' would ignore the --sprawl option.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Remove the option, because it is hard to use.
Drm connector ids are hard to reach for users,
and they can change when kernel or device tree
is modified.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[Pekka: bump WESTON_DRM_BACKEND_CONFIG_VERSION]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tomohito Esaki
Alexandros Frantzis
Philipp Zabel
Stefan Agner
Pekka Paalanen
Derek Foreman
Harsha M M
nerdopolis
Pekka Paalanen
Daniel Stone
Peter Hutterer
Louis-Francis Ratté-Boulianne
Dima Ryazanov
Joshua Watt
Ucan, Emre (ADITG/SW1)