get_surfaces_on_layer() allocates memory and stores the pointer to
'ivisurfs'. But it was not freed.
Signed-off-by: Wataru Natsume <WATARU_NATSUME@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The warning of ivisurface reassign can be removed. It is ok to reassign
a surface to a layer it is already on.
The warning started to show up during normal operations since patch
"hmi-controller: remove duplicate commit_changes in random mode".
Signed-off-by: Wataru Natsume <WATARU_NATSUME@xddp.denso.co.jp>
[Pekka: rewrote commit message, removed unneeded comments.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Previous code cleaned up surfaces in layer once and then added
surfaces to a layer in random. In this flow, two commitchanges are
required.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
[WATARU_NATSUME@xddp.denso.co.jp: Removes unnecessary check]
Signed-off-by: Wataru Natsume <WATARU_NATSUME@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When we handle keyboard key events, we already retrieve the key state
at the top of this function, so there is no real need to call the same
libinput function again as we can just reuse the 'key_state' variable
that we have above.
Signed-off-by: Chris Michael <cpmichael@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cleaned up test runner script to unify sections launching weston.
This makes the sections more legible and differences easier to spot.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Fix the protostability function to handle stable protocol files
correctly. Stable protocol XML file names do not have 'stable' in their
name, nor do we want to write that in the prerequisite lists in the
Makefile.
Function 'protoname' does not need fixing, because for stable protocol
prerequisites, the sed pattern will not match, and it passes stem
through as is, which is correct.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Toytoolkit sources don't actually use the presentation_timing client
protocol bindings for anything. Apparently they were there only because
that's how they end up in BUILT_SOURCES.
Move them from toytoolkit sources to BUILT_SOURCES where also other such
things are.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
The current way was enabling WebP support whenever libwebp was found,
giving no way to the user to disable it if they had the library
installed but didn’t want to link against it. This adds a
--without-webp configure option to never link against it, and a
--with-webp one to fail the build if it isn’t found, the default being
to use it if it is present.
Additionally, we now tell the user when WebP support has been disabled
and they try to load a WebP file.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
When we handle pointer button events, we already retrieve the button
state at the top of this function, so there is no real need to call
the same function again as we can just reuse the 'button_state'
variable that we have above.
Signed-off-by: Chris Michael <cpmichael@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
systemd-login support requires dbus (see "dbus.h" header in
"launcher-logind.c") but the configure script was only
checking libsystemd-login availability to define the
HAVE_SYSTEMD_LOGIN macro, which results in undefined
symbols in launcher-unit.
Put the systemd-login checks after the dbus ones, and only
run the checks if it is present. Also mention dbus in the
error message if "--enable-systemd-login" was forced.
Signed-off-by: Manuel Bachmann <manuel.bachmann@iot.bzh>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
The click_to_activate handler fires on every mouse click for a surface
so let's be a little quicker to early return if you're clicking on the
surface that already has activation.
This prevents (among other side effects) the sending of two xdg_configure
events for every mouse click.
This should also make having two seats with keyboards behave in the same
way as a single seat. Previously the second seat could have a keyboard
focus on the surface and prevent some of the extra processing (including
the extra configure events) from taking place.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Keep XRGB apps out of the cursor plane, only ARGB is supported.
This prevents programs like weston-simple-shm from landing in the cursor
plane and being misrendered.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When the cursor plane is disabled the kernel can lose its location.
If we don't update our internal idea of where the plane is at that time,
the next time we set a cursor it can show up at 0,0.
This can show up when an application is put in the cursor plane, removed
from the plane, then put back at the same location. It might show up at
0,0 when it's reinstated.
We now use INT32_MIN as a location for disabled cursors so enabling the
plane will always cause an update.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
clients that implement pointer interface of version 5
wait for the frame event, so without it the scrolling
does not work (GTK+ clients do not scroll now for example).
Xcb axis events are discrete, so it's fine to send
frame after every single axis event
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
weston maintains a copy of the most recently selected "thing" - it picks
the first available type when it copies, and saves that one only.
When an application quits weston will make the saved selection active.
When xwm sees the selection set it will check if any of the offered types
are text. If no text type is offered it will clear the selection.
weston then interprets this in the same way as an application exiting and
causing the selection to be unset, and we get caught in a live lock with
both weston and xwayland consuming as much cpu as they can.
The simple fix is to just remove the test for text presence.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
The surface can have an undefined resource in certain situations (such
as with xwayland). So, since NULL is a valid state for this parameter,
and since the wl_resource_*, etc. calls require their parameters to be
non-NULL, make a practice of always checking the surface resource before
making wayland calls.
update v2:
* Fix some c/p errors for pointer names
* Drop null ptr check in add_popup_grab; probably redundant now
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
update_opacity is only called when a ivi-surface is visible. But the
previous code also checks event masks redundantly. However if the event
happens when ivi-surface is invisible, opacity is not calculated. This
patch removes this redundant check to fix potential bug.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
With change 61ed7b6b, global touch coordinates are being passed to the
touch grab. However, touch->grab is undefined in certain circumstances
such as when the touch screen raises an axis X value larger than the
maximum expected. Move the check for this condition earlier, before our
first use of the pointer.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=92736
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
We're not always dealing with weston_data_sources that have a
wl_resource, or data_sources that belong to drag-and-drop. Check
harder for these on the drag-and-drop code paths triggered from
common code.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
The wrapped weston_data_source struct has new fields which were left
uninitialized, so its access is unreliable.
The data source in xwayland/dnd.c should be eventually setting the
drag-and-drop actions, but it is a lot more incomplete than that
(read: completely), so falls out of the scope of this patch.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
The wrapped weston_data_source struct has new fields which were left
uninitialized, so its access is unreliable.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com
Tested-by: Derek Foreman <derekf@osg.samsung.com>
Prevents a segfault when mousing into clients that don't get_pointer
like weston-simple-shm and weston-simple-damage.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
In order to keep things simple, weston-dnd made a few choices that
turn out to be unrealistic, a few tweaks have been done to make it
less of a playground demo:
- It now caters for copy/move operations, instead of just move,
which still remains the default nonetheless.
- As "move" operations are no longer assumed, the item isn't removed
on start_drag, instead it is made translucent until the drag
operation finishes (and we know whether the item is to be
removed after transfer or left as is)
- For the same reasons, "Drop nowhere to delete item" no longer
happens. Drag-and-drop is a failable operation and must not result
in data loss.
- As multiple actions are now allowed, we set the pointer icon
surface accordingly to the current operation.
This makes weston-dnd a better example of what applications usually
want to do here.
Changes since v2:
- Updated to behave alright-ish with version < 3.
Changes since v1:
- Remove unneeded include. Remove extra newlines. Other minor
code fixes.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Set up a keyboard grab during drag-and-drop, so we can translate
modifiers into preferred actions. The compositor chosen action
is stored in the current weston_data_source in order to make it
accessible to the source/offer at the time of calculating the new
action, but would conceptually be part of weston_drag.
The mapping has been made similar to what GTK+/QT usually do, the
shift key defaults to "move" and ctrl defaults to "copy".
Changes since v2:
- Use enum types and values for the compositor action. Fix
code formatting issues.
Changes since v1:
- Handle the keyboard grab being cancelled. Initialize new
wl_data_source fields.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
That way we'll be able to set the corresponding pointer surface to
a current DnD operation.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
The policy in weston in order to determine the chosen DnD action is
deliberately simple, and is probably the minimals that any compositor
should be doing here.
Besides honoring the set_actions requests on both wl_data_source and
wl_data_offer, weston now will emit the newly added "action" events
notifying both source and dest of the chosen action.
The "dnd" client has been updated too (although minimally), so it
notifies the compositor of a "move" action on both sides.
Changes since v8:
- Add back wl_data_offer.source_actions emission, gone during last
code shuffling. Fix nits found in review.
Changes since v7:
- Fixes spotted during review. Add client-side version checks.
Implement .action emission as specified in protocol patch v11.
Changes since v6:
- Emit errors as defined in DnD actions patch v10.
Changes since v5:
- Use enum types and values for not-a-bitfield stored values.
handle errors when finding unexpected dnd_actions values.
Changes since v4:
- Added compositor-side version checks. Spaces vs tabs fixes.
Fixed resource versioning. Initialized new weston_data_source/offer
fields.
Changes since v3:
- Put data_source.action to use in the dnd client, now updates
the dnd surface like data_source.target events do.
Changes since v2:
- Split from DnD progress notification changes.
Changes since v1:
- Updated to v2 of DnD actions protocol changes, implement
wl_data_offer.source_actions.
- Fixed coding style issues.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Michael Catanzaro <mcatanzaro@igalia.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Weston now sends wl_data_source.dnd_drop_performed and .dnd_finished in
order to notify about the different phases of DnD.
wl_data_source.cancelled is also used as mentioned in the docs, being
emitted also on DnD when the operation is meant to fail (eg. source
and dest didn't agree on a mimetype).
The dnd demo is also fixed so the struct dnd_drag isn't leaked.
https://bugs.freedesktop.org/show_bug.cgi?id=91943https://bugs.freedesktop.org/show_bug.cgi?id=91944
Changes since v6:
- Add client-side version checks. Minor code shuffling.
Changes since v5:
- Dissociate source and offer after cancel. Updated to
apply on top of c9f8f8a7f.
Changes since v4:
- Make wl_data_offer.finish with the wrong state an error.
Changes since v3:
- Fixed wl_data_source.dnd_finished vs cancelled emission on
when interoperating with version < 3 drag destinations.
Changes since v2:
- Handle wl_data_offer.finish. Fixed commit log inconsistencies.
Added version checks. Spaces vs tabs fixes. Fixed resource
versioning.
Changes since v1:
- Updated to protocol v2.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Michael Catanzaro <mcatanzaro@igalia.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
[jonas: only send focus wl_pointer.frame if resource supports it]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Use an event struct to pass axis events around. This helps dealing with the
upcoming axis discrete changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Cannot find out why stropts.h is needed and Linux doesn't support
streams anyway, so there is no stropts.h.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Noticed this while working on primary selection, in the event we run out
of memory when trying to create a new data source, there's a chance
we'll fail on wl_resource_create() and crash from source->resource being
set to NULL.
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
output_id_pool is defined as a uint32_t, thus ffs() provides a range of
1-32 available id numbers. When the 33rd output is enabled, Weston will
set the ID to (unsigned)(-1) and thus lead to some unexpected
behaviors.
I'm not sure what the best way to handle this error would be since this
is in an initialization routine, but at least let's document the
potential error condition with an assert().
Allow the binding-modifier option in weston.ini to take a value of
"none", meaning that none of the usual Super+Tab, Super+K, Super+Fn,
etc. key bindings will be enabled.
Signed-off-by: Bob Ham <bob.ham@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Add a new boolean weston.ini option, "allow-zap" to enable or disable
the Ctrl-Alt-Backspace key combination.
Signed-off-by: Bob Ham <bob.ham@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>