config-parser.h is a helper API that libweston core must never depend on. Using
it is a compositor frontend decision.
Including it in libweston.h would give the wrong message.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Allow a gstreamer pipeline to be configurable via an weston.ini. It is
necessary that source is appsrc, its name is "src", and sink name is
"sink" in pipeline. Also, remoting plugin ignore port and host
configuration if the gst-pipeline is specified.
This patch enables a user to opt for HDCP per output, by writing into
the output section of weston.ini configuration file. HDCP is always
enabled by default for the outputs.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
By default the client communicates its preference with regards to
compression to the server. However, some clients always use
compression, which is not ideal for certain environments (e.g.
low performance embedded devices in a local network with plenty
of bandwidth). Allow to disable compression server-side which will
override the clients request for compression.
Signed-off-by: Stefan Agner <stefan@agner.ch>
We were testing the wrong variable to see if output creation had failed:
instead of testing the return of the function we'd just called, we were
testing something we'd already checked earlier.
Signed-off-by: Daniel Stone <daniels@collabora.com>
WESTON_OPTION_BOOLEAN takes a pointer to an int as an argument, but
there were several cases of being passed a pointer to a bool instead.
This changes it to use a local int instead, and then write that value to
the bool.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
As we transition towards a more generic API for weston loggging
framework rename weston_debug_compositor to weston_log_context to show
the fact that this is not really debug but a logging context.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This patch allows initialization of weston-debug/log framework much earlier
than weston_compositor, which in turn will provide the option start
logging before weston_compositor has been created.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The printf() format specifier "%m" is a glibc extension to print
the string returned by strerror(errno). While supported by other
libraries (e.g. uClibc and musl), it is not widely portable.
In Weston code the format string is often passed to a logging
function that calls other syscalls before the conversion of "%m"
takes place. If one of such syscall modifies the value in errno,
the conversion of "%m" will incorrectly report the error string
corresponding to the new value of errno.
Remove all the occurrences of the specifier "%m" in Weston code
by using directly the string returned by strerror(errno).
While there, fix some minor indentation issue.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
This is an installed public header, and without the subdir would surely
conflict with something else.
include/libweston/meson.build is necessary for putting the generated header in
the right subdirectory so that '#include <libweston/version.h>' can work.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
It is a public installed header used by libweston.h.
See "Rename compositor.h to libweston/libweston.h" for rationale.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The backend headers are renamed from compositor-foo.h to backend-foo.h to
better describe their purpose. These headers are public libweston API for each
specific backend.
The headers will also be used like
#include <libweston/backend-drm.h>
instead of
#include <compositor-drm.h>
to give them a more explicit namespace.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The main idea is to make libweston users use the form
#include <libweston/libweston.h>
instead of the plain
#include <compositor.h>
which is prone to name conflicts. This is reflected both in the installed
files, and the internal header search paths so that Weston would use the exact
same form as an external project using libweston would.
The public headers are moved under a new top-level directory include/ to make
them clearly stand out as special (public API).
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
build path ends in the final binary package causing the
build not to be reproducible byte-by-byte.
Reference:
https://bugs.debian.org/899358
Signed-off-by: Héctor Orón Martínez <zumbi@debian.org>
Weston 6.0.0 was released with both autotools and Meson build systems. That
should be enough for downstream to migrate to Meson build on their on pace.
Maintaining two build systems is a hassle, keep the one that is easier to work
with and let the other one go.
doc/dozygen/tool*.doxygen.in are not deleted, because they have not been
integrated with Meson yet.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
cms-colord.c calls things like g_string_free() and g_object_unref(), so it
needs to link glib-2.0 and gobject-2.0 explicitly, instead of relying on colord
pkg-config bringing them in.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We loaded the use-pixman configuration value from both the command line
and the configuration file, but completely ignored the former. Make sure
we actually use both.
Tested with all permutations of config/command line.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
When building screen-share module with meson loading the module
fails with:
[00:01:28.604] Failed to load module: /usr/local/lib/weston/screen-share.so: undefined symbol: os_create_anonymous_file
Failed to process Wayland connection: Broken pipe
failed to create display: Broken pipe
The function os_create_anonymous_file is defined in libshared,
adding libshared to the dependency makes sure the function gets
compiled into screen-share.so.
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/208
Signed-off-by: Stefan Agner <stefan@agner.ch>
If xwayland is disabled, compositor/weston is built without
compositor/xwayland.c, which defines wet_load_xwayland.
compositor/fb12c4d@@weston@exe/main.c.o: In function `main':
../weston-5.0.0-169-g2d4cc4f4dd6a/compositor/main.c:3103: undefined reference to `wet_load_xwayland'
Provide an empty stub for wet_load_xwayland if xwayland is disabled.
With that we also have to remove xwayland.c from the autotools build
if xwayland is disabled, to avoid a multiple definition error.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This is so that, for instance, people using weston as their main Wayland
compositor can invert the sense of two finger scrolling or change
pointer acceleration using weston.ini, rather than having to edit C
code.
All of the options that libinput itself exposes through its API are now
exposed in weston.ini. The new options are called `tap-and-drag`,
`tap-and-drag-lock`, `disable-while-typing`, `middle-emulation`,
`left-handed`, `rotation`, `accel-profile`, `accel-speed`,
`scroll-method`, `natural-scroll`, and `scroll-button`. I have
successfully tested everything except for `rotation`, out of a lack of
hardware support.
weston now depends directly on libevdev for turning button name strings into
kernel input codes. This was needed for the `scroll-button` config
option. (weston already depends indirectly on libevdev through
libinput, so I figured people would be OK with this.) As a practical
matter for debian-style packagers, weston now has a build dependency on
libevdev-dev.
Right now, the code applies the same options to all attached devices
that a given option is relevant for. There are plans for multiple
[libinput] sections, each with different device filters, for users who
need more control here.
Signed-off-by: Eric Toombs <3672-ewtoombs@users.noreply.gitlab.freedesktop.org>
This is to increase consistency in config option naming in weston.ini.
(Prefer hyphens over underscores to separate words.)
If enable_tap is present in weston.ini, an obnoxious error message is
logged with weston_log(). In terms of configuration, if enable-tap is
present, enable_tap is ignored.
Signed-off-by: Eric Toombs <3672-ewtoombs@users.noreply.gitlab.freedesktop.org>
Pixman can be used for rendering if the default GLESv2 rendering
is broken or cannot be used.
Pixman-based rendering is already available with the command-line
switch '--use-pixman'. This patch adds support for this option to
the configuration file. Putting
[core]
use-pixman=true
into 'weston.ini' enables pixman-based rendering for all backends
that support it. With this change, pixman has to be enabled only
once.
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/27
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Meson links with the C compiler, not the raw linker.
With clang+LLD, the bare flag would be ignored.
Signed-off-by: Greg V <greg@unrelenting.technology>
Previously weston-screenshooter was installed in LIBEXECDIR, but given
that now it can be invoked by the user whenever debug protocol is
enabled, let's intall it into BINDIR. This way, it can be invoked
without the need to modify PATH.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
This allows to possibility to specify where to look for the executable
but also simplifies the need of having to pass either BINDIR/LIBEXECDIR
for retrieving full-path of the executable.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
Screenshots of the outputs can only be taken by having a keyboard
plug-ed in, as to avoid potential malicious intent. On the other hand,
this is problematic as there are cases where a keyboard cannot
be used as a input device. A particular use-case is that for
multiple devices it can be cumbersome to connect a keyboard such
that using ssh can be much easier and can be further automated.
This patch allows taking screenshots without the need of having a
keyboard connected when debug protocol is enabled.
Add also a few words about the fact that this is a serious issue
and can lead to silently leaking the output contents.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
Meson is a build system, currently implemented in Python, with multiple
output backends, including Ninja and Make. The build file syntax is
clean and easy to read unlike autotools. In practise, configuring and
building with Meson and Ninja has been observed to be much faster than
with autotools. Also cross-building support is excellent.
More information at http://mesonbuild.com
Since moving to Meson requires some changes from users in any case, we
took this opportunity to revamp build options. Most of the build options
still exist, some have changed names or more, and a few have been
dropped. The option to choose the Cairo flavour is not implemented since
for the longest time the Cairo image backend has been the only
recommended one.
This Meson build should be fully functional and it installs everything
an all-enabled autotools build does. Installed pkg-config files have
some minor differences that should be insignificant. Building of some
developer documentation that was never installed with autotools is
missing.
It is expected that the autotools build system will be removed soon
after the next Weston release.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Remoting plugin support streaming image of virtual output on drm-backend
to remote output. By appending remote-output section in weston.ini,
weston loads remoting plugin module and creates virtual outputs via
remoting plugin. The mode, host, and port properties are configurable in
remote-output section.
This plugin send motion jpeg images to client via RTP using gstreamer.
Client can receive by using following pipeline of gst-launch.
gst-launch-1.0 rtpbin name=rtpbin \
udpsrc caps="application/x-rtp,media=(string)video,clock-rate=(int)90000,
encoding-name=JPEG,payload=26" port=[PORTNUMBER] !
rtpbin.recv_rtp_sink_0 \
rtpbin. ! rtpjpegdepay ! jpegdec ! autovideosink \
udpsrc port=[PORTNUMBER+1] ! rtpbin.recv_rtcp_sink_0 \
rtpbin.send_rtcp_src_0 !
udpsink port=[PORTNUMBER+2] sync=false async=false
where, PORTNUMBER is specified in weston.ini.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Xwayland block SIGUSR1 signal for handling this signal. However, if some
weston plugins creates additional threads before xwayland is loaded,
this signal get delivered these threads and causes weston quit.
Therefore, we should set up SIGUSR1 blocking early so that these threads
can inherit the setting when created.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
We are currently formatting 32-bit signed integers into 8 byte buffers,
which are too small, causing the compiler to complain. Update the buffer
size to the minimum required value of 12 bytes: 1 for the sign, 10 for
the number, and 1 for the null byte terminator.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Keep non-desktop heads representing e.g. head mounted displays turned off by
default. When using the DRM backend they can still be enabled by setting an
explicit [output] mode (or "mode=preferred") in weston.ini.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Weston should not exit if stdin is a closed stream. This allows
to launch with a closed stdin:
# weston <&-
This fixes screen sharing using weston: Weston closes the stdin
before forking itself to execute the screen sharing instance of
weston. Before this patch screen sharing failed with:
Screen share failed: No wl_shm found
unknown child process exited
Fixes: f0d39b2243 ("weston: Set CLOEXEC on stdin")
Signed-off-by: Stefan Agner <stefan@agner.ch>
This is better than running Weston with WAYLAND_DEBUG=server:
- It is enabled on demand, no unnecessary flooding and no need to
restart the compositor if debug was enabled.
- It prints client pointers so that messages with different clients can
be seen apart.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
parse and print message arguments in protocol_log_fn
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This registers a new weston-debug scope "log" through which one can get
live log output interspersed with possible other debugging prints. This
is implemented by passing the format and varargs received in our usual
logging entrypoints through to the debug scope as well.
Anywhere where the varargs set is used twice (once for vfprintf, another
for the debug scope), we copy the va_list in order to avoid reusing it,
which leads to memory safety issues.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Let users enable the compositor debug protocol on the compositor command
line. This allows weston-debug tool to work.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Marius Vlad
Pekka Paalanen
Tomohito Esaki
Ankit Nautiyal
Stefan Agner
Daniel Stone
Fabrice Fontaine
Silva Alejandro Ismael
Scott Anderson
Antonio Borneo
Héctor Orón Martínez
Emmanuel Gil Peyrot
Philipp Zabel
Eric Toombs
Thomas Zimmermann
Pekka Paalanen
Greg V
Marius Vlad
Alexandros Frantzis
Philipp Zabel