Implements a simple mechanism to allow tests to customize the
configuration. For a given <name>-test.c just place a <name>.ini file
at the same location as the test itself. Alternately, you can generate
a <name>.ini in the same directory that the compiled test is placed
(i.e. the top builddir). If no configuration file is found, then no
configuration will be used (i.e. --no-config is specified.)
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Introduce helper routines for testing surfaces against specific
conditions. These allow tests to validate screen captures as displaying
the correct rendering results.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
This is the ivi_layout stand-alone test controller module that does not
require any clients to run. Therefore it is much simpler than
ivi_layout-test-plugin.c and does not need a matching part in
ivi_layout-test.c.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Testing the ivi_layout API requires two things:
- the tests must be written as a controller module to access the API
- the tests need a helper client to create some objects that can then be
managed via the API
This patch adds all the infrastructure and two different kinds of
example tests.
Internal ivi-shell (ivi_layout) API tests are listed as ivi-*.la files
in TESTS in Makefile.am. Weston-tests-env detects these, and runs Weston
with ivi-shell, and loads the given module as a controller module, not
as a normal plugin.
The test controller module ivi-*.la will launch a helper client. For
ivi-layout-test.la the helper client is ivi-layout.ivi.
The helper client uses the weston-test-runner framework to fork and exec
each TEST with a fresh connection to the compositor.
The actual test is triggered by the weston_test_runner protocol
interface, a new addition to weston-test.xml. The helper client uses
weston_test_runner to trigger a test, and the server side of the
interface is implemented by the test controller module
(ivi-layout-test.la).
The server side of weston_test_runner uses the same trick as
weston-test-runner.h to gather a list of defined tests. A test is
defined with the RUNNER_TEST macro.
If a test defined by RUNNER_TEST succeeds, an event is sent to the
helper client that it can continue (or exit). If a test fails, a fatal
protocol error is sent to the helper client.
Once the helper client has iterated over all of its tests, it signals
the batch success/failure via process exit code. That is cought in the
test controller module, and forwarded as Weston's exit code.
In summary: each ivi_layout test is a combination of a client side
helper/setup and server side actual tests.
v2: Load weston-test.so, because create_client() needs it.
v3: add a comment about IVI_TEST_SURFACE_ID_BASE.
v4: Rebased to upstream weston-tests-env changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com> (v2)
This simply tests that Weston starts with ivi-shell, and ivi_application
is present.
Changes in v3:
- Rebased to upstream weston-tests-env changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com> (v2)
Also use variable default assignment to eliminate an if clause
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The log files were being named like:
surface-global-test.la-log.txt
surface-global-test.la-serverlog.txt
surface-test.la-log.txt
surface-test.la-serverlog.txt
text.weston-log.txt
text.weston-serverlog.txt
For consistency, omit the test filename's extension (.la/.so).
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
basename returns the filename without path information (but with
the file extension). We can get this more efficiently via shell
variables.
Also, for the socket name, use the test's name without the file
extension.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
[Pekka: rebased without "tests: Support --config to enable tests to
override config defaults".]
A more descriptive name to not be confused with create_client().
v2: Rebased: fix also devices-test.c.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Introduce a new helper create_client(), which creates and initializes
the client struct, but does not create a wl_surface.
This will be useful for ivi-shell tests.
v2: Rebased, and restored the dependency to weston-test.so, since seat
handling requires it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Test misc races when adding/releasing devices
v2.: use one roundtrip after releasing devices
add touch support
v3.: remove useless checks
add few comments
repeat tests 30 times instead of 100 times
(it took too long, 30 is enough)
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Let the client bind to wl_touch. Since we have our own seat,
we know that the compositor will have wl_touch capability.
v2: rebased due to changes in previous commit
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When running on different backends, we don't know what devices
the backend provides. Create new seat for tests that contains
everything what we need. This is also first step in adding
touch support for tests.
v2: do not add devices in wl_seat.name event. Collect first
all wl_seats and then pick the one that we need and
destroy the rest. The effect is the same, but this code
is better understandable.
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We used hard-coded version 1 for all globals. For testing
newer methods and events we need use the current version
of global. This patch fixes this and adds missing
event handlers (for the events that were added in
versions > 1)
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This request simulates device creation/destruction from evdev (libinput)
v2: added support for touch. Touch is not supported yet,
but better be prepared
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Make a little short-hand for the module directory.
This also cleans up the redefinition of BACKEND in the script.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jonny Lamb <jonny.lamb@collabora.co.uk>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
first is for getting and binding to globals and the other one is for
getting wl_shm.formats that are emitted after binding
to wl_shm
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a new Weston plugin under tests/ for manual testing of the
surface-shooting API.
The debug key binding 'h' triggers a surface shot from the surface that
currently has the pointer focus. The shot is written in PAM format into
a file. PAM format was chosen because it is dead-simple to write from
scratch and can carry an RGBA format.
Changes in v2:
- check fprintf calls, fix a malloc without free
- remove stride and format arguments from the API
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Daniel Stone <daniels@collabora.com>
wayland-test isn't and will never be wayland protocol, it's weston internal.
Renamed wayland-test to weston-test, and wl_test to weston_test.
Also added a Big Fat Warning to the description of weston_test to try to
keep people from thinking it's a good idea to use some of these functions
outside of testing.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
weston-test uses eglBindWaylandDisplayWL and friends, which are defined
either by the EGL implementation, or weston-egl-ext.h as a fallback.
Include weston-egl-ext.h from weston-test, so we can build on systems
whose native EGL implementation doesn't give us the needed defines.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <ppaalanen@gmail.com>
The old xwayland-test hasn't worked in a while...
This new test checks that the wayland specific WL_SURFACE_ID atom exists,
checks that the window manager name is "Weston WM" and then maps a window
and waits for an exposure event.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Tested-by: Bryce Harrington <bryce@osg.samsung.com>
This skips the test when running on the headless backend.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
(Presumably) Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Decode the new feedback flags.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Since this is an inlined function, move it to a common header file.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Mostly remove headers that aren't actually needed for anything.
Add stdint.h to permit dropping xf86drm.h, which is otherwise unneeded.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Marek Chalupa <mchqwerty@gmail.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tests will now return the extra command line parameters they need
when run with --params
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add tests for triggering the role conflict when a wl_surface is already
a wl_shell_surface and then attempted to be made into a sub-surface, and
vice versa.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
desktop shell and weston keyboard both refer to themselves prefixed by
LIBEXECDIR, however this is only valid once installed. make check will
currently either fail or run pre-existing versions.
This patch adds a way to override that location by setting the env var
WESTON_BUILD_DIR - which is then set by the test env script so make check
will test the versions in the build directory regardless of whether they're
installed or not.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This introduces a new struct, weston_layer_entry, which is now used
in place of wl_list to keep the link for the layer list in weston_view
and the head of the list in weston_layer.
weston_layer_entry also has a weston_layer*, which points to the layer
the view is in or, in the case the entry it's the head of the list, to
the layer itself.
With expect_protocol_error, we need a possibility to wait for a frame
without aborting the test when wl_display_dispatch returns -1;
This patch adds function frame_callback_wait_nofail that only
returns 1 or 0 (instead of aborting on error).
Reviewed-by: Pekka Paalanen <ppaalanen@gmail.com>
This function checks if a particular protocol error came in wire.
It's usefull in the cases where we hitherto used FAIL_TEST.
The problem with FAIL_TEST is that *any* assert will pass the test,
but we want only some asserts to pass the test (i. e. we don't
want the test to pass when it, for example, can't connect to display).
FAIL_TESTs are good only for sanity testing.
The expect_protocol_error allows us to turn all FAIL_TESTs to TESTs
as will be introduced in following patches.
v2: fixed white-space error and a mistake in comment
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
Reviewed-by: Pekka Paalanen <ppaalanen@gmail.com>
Again, load the shell plugin with full path, rather than possibly find an
old version from a previous installation.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If we do not specify the full path to xwayland.so, Weston can find an
old one installed in a $prefix and use that instead of the freshly built
one.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Bryce Harrington
Derek Foreman
Pekka Paalanen
Marek Chalupa
Jonny Lamb
Daniel Stone
Giulio Camuffo