This prevents loading a backend as a simple module. This will avoid
messing up with backends when we will introduce libweston common
modules.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
As an option, allow to specify a mode (from the configuration file) by
its refresh rate.
Example of valid syntax:
- "mode=1920x1080" Select a 1920x1080 mode, refresh rate undefined.
- "mode=1920x1080@60" Select the (or one of the) 1920x1080 60 Hz mode.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Try to harmonise the various plane-import paths a little bit, starting
with reshuffling and commenting the conditions to do so.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Differential Revision: https://phabricator.freedesktop.org/D1413
This always changes the state to ACTIVE when we enter the session,
whereas the previous implementation preserved the state (i.e. if state
was SLEEPING on exit, it would be restored to SLEEPING, but also with a
repaint). This seems more helpful behaviour, however: if you enter a
session, it's probably in order to interact with it.
Differential Revision: https://phabricator.freedesktop.org/D1482
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Even if we do have a framebuffer matching the mode, we immediately
schedule a repaint, meaning we either do work for no reason, or show
stale content before we bring up the new content.
Delete this and just let repaint deal with it.
Differential Revision: https://phabricator.freedesktop.org/D1481
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
This will be used so we can later determine the compatibility of drm_fbs
without needing to introspect external state.
Differential Revision: https://phabricator.freedesktop.org/D1487
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
This makes it sign-compatible with weston_output->{width,height}.
Differential Revision: https://phabricator.freedesktop.org/D1486
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Everyone else uses fb->fd rather than pulling the FD back out of GBM.
Use that in the destroy callback too.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Differential Revision: https://phabricator.freedesktop.org/D1406
No functional change.
Differential Revision: https://phabricator.freedesktop.org/D1484
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
No need to walk the CRTC list every time looking for CRTC indices, when we
already have the CRTC index stashed away. Taking the plane as an argument
also simplifies things a little for callers, and future-proofs for a
potential future KMS API which passes a list of supported CRTC IDs rather
than a bitmask of supported CRTC indices.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Differential Revision: https://phabricator.freedesktop.org/D1407
Clarify the difference between crtc_id (DRM object) and pipe (index into
drmModeRes->crtcs array, possible_crtcs bitmask).
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Differential Revision: https://phabricator.freedesktop.org/D1405
This change adds <platform_attribs> parameter to
gl_renderer_display_create() in case we ever want to pass non-NULL.
Signed-off-by: Miguel A Vico Moya <mvicomoya@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Reviewed-by: James Jones <jajones@nvidia.com>
[Pekka: removed notes about EGLOutput]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
No functional change. This patch renames gl_renderer_output_create() to
gl_renderer_output_window_create(), which is something more descriptive
of what the function does.
Signed-off-by: Miguel A Vico Moya <mvicomoya@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Reviewed-by: James Jones <jajones@nvidia.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
No functional change. This patch only renames gl_renderer_create() to
gl_renderer_display_create(), which is something more descriptive of
what the function does.
Signed-off-by: Miguel A Vico Moya <mvicomoya@nvidia.com>
Reviewed-by: James Jones <jajones@nvidia.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
As to what is done for gl-renderer.c, weston-egl-ext.h should be
include in compositor-drm.c, compositor-x11.c and compositor-wayland.c.
This fix building issue with GPU that does not have EGL_PLATFORM_xxx_KHR
in their extension header file eglext.h.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This is a complete port of the DRM backend that uses
the recently added output handling API for output
configuration.
Output can be configured at runtime by passing the
necessary configuration parameters, which can be
filled in manually or obtained from the configuration
file using previously added functionality. It is
required that the scale and transform values are set
using the previously added functionality.
After everything has been set, output needs to be
enabled manually using weston_output_enable().
v2:
- Added missing drmModeFreeCrtc() to drm_output_enable()
cleanup list in case of failure.
- Split drm_backend_disable() into drm_backend_deinit()
to accomodate for changes in the first patch in the
series. Moved restoring original crtc to
drm_output_destroy().
v3:
- Moved origcrtc allocation to drm_output_set_mode().
- Swapped connector_get_current_mode() and
drm_output_add_mode() calls in drm_output_set_mode()
to match current weston.
- Moved crtc_allocator and connector_allocator update
from drm_output_enable() to create_output_for_connector()
to avoid problems when more than one monitor is connected
at startup and crtc allocator wasn't updated before
create_output_for_connector() was called second time,
resulting in one screen being turned off.
- Moved crtc_allocator and connector_allocator update from
drm_output_deinit() to drm_output_destroy(), as it
should not be called on drm_output_disable().
- Use weston_compositor_add_pending_output().
- Bump weston_drm_backend_config version to 2.
v4:
- Reset output->original_crtc to NULL if drm_output_set_mode()
fails.
- Remove unneeded log message when disabling an output when a
pageflip is pending.
- Document that create_output_for_connector() takes ownership
of the connector.
- Free the connector if create output conditionals are not met
in create_outputs() and update_outputs().
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Valgrind noticed that we send uninit data to drmModeAddFB2. While
the kernel should never read this (because of the plane format),
it's probably still nicer to zero the data before we send it.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
This uses container_of instead of explicit cast to retrieve
backend and output objects from generic weston_backend and
weston_output pointers.
v2:
- Remove unneeded cast
- Remove unneeded line breaks
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When there are no outputs left after a hotplug event, weston
will terminate. This isn't desired when trying to get weston
to work with zero outputs.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Returning an error when there are no connectors results in
weston terminating after that. That's not expected when
trying to get weston to start with zero drm outputs.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This clarifies what is supposed to be the libweston code.
v2: screen-share.c is already in compositor/ instead.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Benoit Gschwind <gschwind@gnu-log.net>
Acked-by: Benoit Gschwind <gschwind@gnu-log.net>
[Pekka: rebased]
At the moment only XRGB8888 is supported when using pixman renderer.
This patch adds support also for RGB565.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Backends do not have access to command line elements nor weston_config
anymore. They use the backend-specific config APIs now.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Instead add callbacks to the drm and fbdev backends and pass that to
the input backens so that when a new device needs to be configured
that is called and the compositor can configure it.
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When pixman is used and no connector could be found (or any other
error), drm_backend_create() tried to destroy a gbm_device that would
only be created in init_egl(), resulting in a segfault.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The current behaviour leaves the name empty, making it somewhat harder
to determine the characteristics of this mode from a debugger.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
[Pekka: wrap long line (ybakos)]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Preparing for libweston and for the separation of the code base into
libweston vs. weston the compositor, we must remove all uses
weston_config structures from the backends. We have decided that all
option and config input happens in the compositor (main.c), and
configuration is passed in for the backends as structs.
Most other backends have already converted, and this patch converts the
DRM-backend to the libweston-style init API.
The libweston-style init API includes a header for each backend (here
compositor-drm.h) defining the configuration interface. The compositor
(main.c) prepares a configuration struct to be passed through libweston
core to the backend during initialization.
A complication with the DRM-backend is that outputs can be hotplugged,
and their configuration needs to be fetched from the compositor
(main.c). For this, the config struct contains a callback member. The
output configuration API is subject to change later, this is just a
temporary API to get libweston forward.
As weston_compositor's user_data was not previously used for anything,
and the output configuration callback needs data, the user_data is set
to the 'config' pointer. This pointer is only used in
drm_configure_output() in main.c.
[Bryce: lots of stuff and rebasing]
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Benoit Gschwind <gschwind@gnu-log.net>
[Pekka: write commit message]
[Pekka: squash in "drm: Don't hang onto the backend config object
post-backend_init" from Bryce Harrington]
[Pekka: drop the compositor.h hunk]
[Pekka: do not #include inside extern "C"]
[Pekka: remove incorrect comment about weston_drm_backend_config
ownership.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
In preparation for follow-on changes to support frame presentation
through EGLDevice+EGLOutput, this change includes the following:
- Rename drm_backend::format to gbm_format
- Rename drm_output::format to gbm_format
- Rename drm_output::surface to gbm_surface
- Rename drm_output::cursor_bo to gbm_cursor_bo
Signed-off-by: Miguel A Vico Moya <mvicomoya@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[Pekka: trivial rebase out of the series]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
current_mode is already the pointer, taking the address of it is wrong.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94562
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
[Pekka: rewrote the patch]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Remove the unstable presentation_timing.xml file, and use
presentation-time.xml from wayland-protocols instead to generate all the
Presentation extension bindings.
The following renames are done according to the XML changes:
- generated header includes
- enum constants and macros prefixed with WP_
- interface symbol names prefixed with wp_
- protocol API calls prefixed with wp_
Clients use wp_presentation_interface.name rather than hardcoding the
global interface name: presentation-shm, weston-info, presentation-test.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
[Pekka: updated wayland-protocols dependency to 1.2]
Keep XRGB apps out of the cursor plane, only ARGB is supported.
This prevents programs like weston-simple-shm from landing in the cursor
plane and being misrendered.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When the cursor plane is disabled the kernel can lose its location.
If we don't update our internal idea of where the plane is at that time,
the next time we set a cursor it can show up at 0,0.
This can show up when an application is put in the cursor plane, removed
from the plane, then put back at the same location. It might show up at
0,0 when it's reinstated.
We now use INT32_MIN as a location for disabled cursors so enabling the
plane will always cause an update.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Add a new boolean weston.ini option, "vt-switching" to enable or
disable Ctrl-Alt-Fn key combinations.
Signed-off-by: Bob Ham <bob.ham@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
(Derek Foreman changed the prototype for switch_vt_binding to
have a weston_keyboard * instead of weston_seat *. The pointer
wasn't used, so this is just a warning fix.)
This allows renderers to use that struct to create their own dmabufs,
in case they can’t import the one provided by the client directly but
know how to convert it into a format they can render.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Differential Revision: https://phabricator.freedesktop.org/D332
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Fix a regression introduced by be428b3825
which accidentally removed the global-to-output space conversion.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cc: Derek Foreman <derekf@osg.samsung.com>
Cc: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Derek Foreman <derekf@osg.samsung.com>
Make sure a view's transform is viable for a cursor plane and
then actually apply it before setting the cursor plane location.
Now if a subsurface ends up in the cursor plane, the plane will be
properly positioned.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
mmap() function expects to be passed a void pointer as the address
here. Passing NULL is technically more correct than passing 0.
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
commit e76f185 stopped using visuals with "native visual id" == 0
This broke some systems, so we now try 0 as a worst case fallback if
everything else has failed.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Add new configuration argument to the backend_init() function, which
will replace the current argc, argv, and config arguments.
After each backend is converted individually the unused parameters
will be removed.
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
In commit 70d337dfd we changed one cursor size test from a hard coded 64,64
to the actual device provided width, height.
The test in drm_assign_planes remained fixed at 64, 64.
The simple-shm test ended up being small enough to fit into a cursor plane
by one test, but too large by the test in drm_assign_planes. We'd assign
to the cursor plane but not keep a reference.
weston-simple-shm would disappear and be replaced with the previous
cursor image.
This partially "fixes" T3361.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
strncpy only adds null terminating bytes if the source string is smaller
than the destination string. Since this function relies on the string
being null terminated when checking its contents, we better make sure
there is at least a \0 as the last character.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
This reverts commit 6858383d51.
The main reason for the original patch was a regression on the Intel
drivers causing compositor framerate to drop to half during cursor
updates or motion. The Intel problem was fixed in
2e7f43c41c
The fix is included in Linux 4.1-rc6 and 4.0.5.
The comment in the original patch is still true, but arguably the
possible minor glitches with cursor updates are less bad than not using
cursor planes at all.
Cc: nerdopolis <bluescreen_avenger@verizon.net>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Giulio Camuffo <giuliocamuffo@gmail.com>
Cc: David FORT <contact@hardening-consulting.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bumping libdrm requirement by 3 years just for output connector name
constants was a bit much. Fix the problem introduced in
89c49b3060 by conditionally using the new
additions.
Both VIRTUAL and DSI came in the same libdrm commit
566c3ce877a4be72697e15cdfc421ce965f7c37d, so we check only for DSI.
This patch also reverts faee330c5e.
Reported-by: Eugen Friedrich <friedrix@gmail.com>
Cc: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
The problem with the old table of names is that it contains duplicates.
It is possible to end up with multiple outputs with the same name. In
that case you cannot write individual configurations for these outputs
in weston.ini, because they are matched by the name.
Change all names to follow the kernel naming scheme set in
drivers/gpu/drm/drm_crtc.c. The snprintf format now follows the kernel
style, too. Use the DRM_MODE_CONNECTOR_* macros rather than implicit
table ordering.
Completely new entries in the table are "Virtual" and "DSI".
There should not be any gaps in the macro values, but if there are, deal
with a NULL entry.
Also change "UNKNOWN" to "UNNAMED" so it's easier to distinguish from
"Unknown" by the kernel.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89361
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Drew DeVault <sir@cmpwn.com>
Quentin Glidic
Fabien Dessenne
Abdur Rehman
Daniel Stone
Miguel A. Vico
Vincent Abriou
Armin Krezović
Yong Bakos
Derek Foreman
Jussi Kukkonen
Pekka Paalanen
Tomi Valkeinen
Giulio Camuffo
Emmanuel Gil Peyrot
Bryce Harrington
comic fans
Bob Ham
Chris Michael