The reduction in range limits does have an effect for color values,
which are expressed as hexadecimal values from 0x00000000 to
0xFFFFFFFF. By limiting the range to INT_MAX, color values of
0x80000000 and up are in fact lost.
This reverts commit 6351fb08c2.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Yong Bakos <ybakos@humanoriented.com>
The third arg to strtol() specifies the base to assume for the number.
When 0 is passed, as is currently done in option-parser.c, hexadecimal
and octal numbers are permitted and automatically detected and
converted.
This change is an expansion of f6051cbab8
to cover the remaining strtol() calls in Weston, where the routine is
being used to read fds and pids - which are always expressed in base-10.
It also changes the calls in config-parser, used by
weston_config_section_get_int(), which in turn is being used to read
scales, sizes, times, rates, and delays; these are all expressed in
base-10 numbers only.
The benefit of limiting this to base-10 is to eliminate surprises when
parsing numbers from the command line. Also, by making the code
consistent with other usages of strtol, it may make it possible to
factor out the common code in the future.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
strtoul() has a side effect that when given a string representing a
negative number, it returns a negated version as the value, and does not
flag an error. IOW, strtoul("-42", &val) sets val to 42. This could
potentially result in unintended surprise behaviors, such as if one were
to inadvertantly set a config param to -1 expecting that to disable it,
but with the result of setting the param to 1 instead.
Catch this by using strtol() and then manually check for the negative
value. This logic is modelled after Wayland's strtouint().
Note that this change unfortunately reduces the range of parseable
numbers from [0,UINT_MAX] to [0,INT_MAX]. The current users of
weston_config_section_get_uint() are anticipating numbers far smaller
than either of these limits, so the change is believed to have no impact
in practice.
Also add a test case for negative numbers that catches this error
condition.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
The third arg to strtol() specifies the base to assume for the number.
When 0 is passed, as is currently done in option-parser.c, hexadecimal
and octal numbers are permitted and automatically detected and
converted.
In weston and the weston clients and tests using option-parser.c, the
options are all things that can be expected to be specified in base 10:
widths, heights, counts, scales, font sizes, ports, ttys, connectors,
etc. The subsurfaces client uses two modes, limited to values 0 and 1
only. The zuc testsuite has a --random parameter for specifying a seed,
which is the only option where using hexadecimal or octal numbers might
conceivably happen.
The benefit of limiting this to base-10 is to eliminate surprises when
parsing numbers from the command line. Also, by making the code
consistent with other usages of strtol/strtoul, it may make it possible
to factor out the common code in the future.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Check errno, which is set of over/underflow, out of range, etc. Also
check for empty strings (the usages covered in this patch already also
cover the case where there are non-digits present). Set errno to 0
before making the strto*l call in case of pre-existing errors
(i.e. ENOTTY when running under the testsuite).
This follows the error checking style used in Wayland
(c.f. wayland-client.c and scanner.c).
In tests, also check errno, and add testcases for parsing '0'.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Switches from inline to pre-processor definitions in order to utilize
__FILE__ and __LINE__ from the .c file in order to display the location
of memory allocation failures when failing.
Now xmalloc, et al calls will produce:
[weston-info] clients/weston-info.c:714: out of memory (1024)
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Direct fail_on_null calls now produce output like:
[weston-info] clients/weston-info.c:714: out of memory
xmalloc, et al produce output on failure like:
[weston-info] out of memory (-1)
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This allows the header to be consumed by C++ compilers, because C++ does
away with C's implicit cast from (void*).
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
weston allows both short and long style options to take arguments. In
the case of short options, allow an optional space between the option
name and value. E.g., previously you could launch weston this way:
weston -i2 -cmyconfig.ini
now you can also launch it like this:
weston -i 2 -c myconfig.ini
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
It doesn’t make sense to fail the entire build when jpeglib isn’t
present, so this commit makes it optional just like libwebp in the
previous one, disabled with --without-jpeg and forced with --with-jpeg.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
The current way was enabling WebP support whenever libwebp was found,
giving no way to the user to disable it if they had the library
installed but didn’t want to link against it. This adds a
--without-webp configure option to never link against it, and a
--with-webp one to fail the build if it isn’t found, the default being
to use it if it is present.
Additionally, we now tell the user when WebP support has been disabled
and they try to load a WebP file.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
I'll be using this in a follow up patch that adds touch input to weston's
wayland backend.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
When no X11 headers are present eglplatform.h will break unless
certain defines are set prior to its inclusion.
including wayland-egl.h defines WL_EGL_PLATFORM which will stop
the attempted inclusion of the X11 headers.
Maybe this isn't the best solution to the problem, but it's harmless
and gets the job done.
Closes bug: https://bugs.freedesktop.org/show_bug.cgi?id=92104
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
(patch by Ahmet Acar, commit log by Derek Foreman)
A helper to improbe readability.
Cc: Daniel Stone <daniels@collabora.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Removed duplicate definitions of the container_of() macro and
refactored sources to use the single implementation.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Removed multiple definitions of the MIN() macro from existing
locations and unified with a single definition. Updated sources
to use the shared version.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
To help reduce code duplication and also 'kitchen-sink' includes
the ARRAY_LENGTH macro was moved to a stand-alone file and
referenced from the sources consuming it. Other macros will be
added in subsequent passes.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Some DRI drivers, including VMware vmwgfx, do not support
calling eglQueryString() with a EGL_NO_DISPLAY parameter.
Allow toytoolkit to create EGL surfaces with them, by
falling back to the old creation method.
Signed-off-by: Manuel Bachmann <manuel.bachmann@open.eurogiciel.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The dummy typedefs for "get_platform_display()" and
"create_platform_window()" were badly defined, which
prevented building Weston on older systems.
Signed-off-by: Manuel Bachmann <manuel.bachmann@open.eurogiciel.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We have the Weston command line option '--no-config' which is meant to
prevent loading weston.ini at all. It works for Weston itself, but it
does not work for any clients that also want to read weston.ini.
To fix that, introduce a new environment variable WESTON_CONFIG_FILE.
Weston will set it to the absolute path of the config file it loads.
Clients will load the config file pointed to by WESTON_CONFIG_FILE. If
the environment variable is set but empty, no config file will be
loaded. If the variable is unset, things fall back to the default
"weston.ini".
Note, that Weston will only set WESTON_CONFIG_FILE, it never reads it.
The ability to specify a custom config file to load will be another patch.
All programs that loaded "weston.ini" are modified to honour
WESTON_CONFIG_FILE.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jonny Lamb <jonny.lamb@collabora.co.uk>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
open() will happily open directories and other non-normal files.
Attempting to parse them as config files makes no sense, so check that
the opened file is indeed a regular file.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jonny Lamb <jonny.lamb@collabora.co.uk>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
For easy creation of unique new files. I'm looking at you,
screenshooter.
This code is based on timeline.c weston_timeline_do_open().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Daniel Stone <daniels@collabora.com>
If the client is small (< 128 pixels in any ward),
then the shadows overlap and create dark lines behind clients.
This is a problem mosly with pop-up menues. The lines become observable
when the menu has less than three items. The other case is when
the client doesn't restrict its size when resizing (try
'weston-eventdemo --max-width=1 --max-height=1' for example)
This fixes a part of the bug:
https://bugs.freedesktop.org/show_bug.cgi?id=78511
v2:
- rework computing of the size of corners
- rewrite some comments
- rename tile_mask to render_shadow (in separate patch)
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This function is used and clearly designed only for drawing the shadows.
Rename it so that it has name after what it does and also move some
common code into the function.
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It was rather inconsistent before. This may help users figure out why
backgrounds and icons don't show up. A better api where the error can
be queried might be nice, but this seems sufficient for current Weston use.
[Pekka Paalanen: removed one stray space.]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Fail on trailing text after numbers, such as --width=100mm
Fail on any text after booleans, such as --flag=false
Also fixed reading of memory after the null terminator of a long
option with no = sign in it.
[Pekka Paalanen: some whitespace style fixes.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
desktop shell and weston keyboard both refer to themselves prefixed by
LIBEXECDIR, however this is only valid once installed. make check will
currently either fail or run pre-existing versions.
This patch adds a way to override that location by setting the env var
WESTON_BUILD_DIR - which is then set by the test env script so make check
will test the versions in the build directory regardless of whether they're
installed or not.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Previously geometry was changed to leave space for titlebar if a frame
has only buttons but no title. This patch fixes theme_render_frame to
avoid transparent titlebar.
Signed-off-by: Boyan Ding <stu_dby@126.com>
Title can decide the geometry of a frame because it may affect the
existence of titlebar, so setting geometry_dirty in frame_set_title for
potential change.
Signed-off-by: Boyan Ding <stu_dby@126.com>
There exist frames which have buttons without title such as a simple
X application piped through xwayland which doesn't specify a title.
We draw the title bar with buttons, but hide it under the window
because geometry thinks a window needs titlebar only if it has title.
This patch change the condition, making it titlebar is needed if a
frame has title or has button(s), which makes more sense.
Signed-off-by: Boyan Ding <stu_dby@126.com>
There was an issue recently in screen-share.c where config.h was not
being included, resulting in the wrong definition for off_t being used on
32 bit systems. I checked and I don't think this problem is happening
elsewhere, but to help avoid this sort of problem in the future, I went
through and made sure that config.h is included first whenever system
headers are included.
The config.h header should be included before any system headers, failing
to do this can result in the wrong type sizes being defined on certain
systems, e.g. off_t from sys/types.h
Signed-off-by: Andrew Wedgbury <andrew.wedgbury@realvnc.com>
This is used to figure out the size of "invisible" decorations, which we'll
use to better know the visible extents of the surface, which we can use for
constraining, titlebars, and more.
Bryce Harrington
Emmanuel Gil Peyrot
Matthias Treydte
Emmanuel Gil Peyrot
Derek Foreman
Ahmet Acar
Pekka Paalanen
Jon Cruz
Murray Calavera
Manuel Bachmann
Jonny Lamb
Marek Chalupa
Xiong Zhang
Bill Spitzak
Xiong Zhang
Boyan Ding
Jasper St. Pierre
Andrew Wedgbury
Kristian Høgsberg
U. Artie Eoff