clients/editor.c: In function ‘read_file’:
clients/editor.c:1578:16: warning: logical ‘or’ applied to non-boolean
constant [-Wlogical-op]
errno = errsv || EINVAL;
This works in the shell, but not in C. Introduced in 411ffabbb5
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Emilio Pozuelo Monfort <pochu@debian.org>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
To me it was not obvious that this call is necessary, so provide some
rationale.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
When we as the WM tell the X server to map a window, it gets mapped. We
can start drawing into it immediately. There is no reason to wait for
any other events before drawing the decorations.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Most display managers handle starting a dbus session daemon for you, so
it does not make sense to start our own. Without this patch, if you run
weston from gdm, programs cannot connect to the dbus session daemon.
Reviewed-by: Daniel Stone <daniels@collabora.com>
This comes via Wayland, WL_SURFACE_ID comes via X11. They race. Nice to
get both printed.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Having it in a separate function makes it more clear what it is, and
allows it to be called from elsewhere.
This really is the set_pending_state() alternative for override-redirect
windows, because OR windows do not get a frame window created. Also OR
windows will never hit the normal set_pending_state() because
weston_wm_window_schedule_repaint() special-cased windows without a
frame window and returned early without scheduling.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Move the region fini just above the region init. They are a pair and
belong togeether. Split a long line.
Reads better this way. No functional changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Split the function into two:
- weston_wm_window_draw_decoration() that only draws the decorations
with Cairo, and
- weston_wm_window_set_pending_state() which sets up the surface state
to be latches into use on the next commit from Xwayland.
The new weston_wm_window_do_repaint() is the equivalent of the old
weston_wm_window_draw_decorations(), everything still happens the same
way as it was. Just some debug messages have been reworded.
weston_wm_window_read_properties() is moved into
weston_wm_window_do_repaint() because it is not strictly a part of
drawing decorations. The same with resetting repaint_source.
draw_decorations does not need the child position nor xwayland
interface. Also some convenience variables have been eliminated.
set_pending_state code has been un-indented by one level, so the change
is best viewed with whitespace changes ignored.
This patch makes the code more readable, and prepares for calling the
draw_decorations and set_pending_state from different places.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Store the initial xwayland position explicitly in struct shell_surface.
New variables are needed, because e.g. saved_x, saved_y are the view
position, and to compute that we need the window geometry, which is not
available before the first commit, so it's not available at
set_xwayland_position() time.
Regression: kcachegrind (Qt 4, X11), the first menu invocation will
slightly misplace the menu if the window has not been manually moved.
Problem: geometry is not taken into account due to a race between XWM
drawing decorations and Xwayland committing the first buffer.
Use the same debugging guard as XWM.
v3: merged with "desktop-shell: debug set_position_from_xwayland"
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
X11 applications expect -geometry command line option to work for
setting the initial window position, but currently this does not work.
During map, detect X11 windows that set an explicit position. This works
by heuristics: if window position is not 0,0 then it is explicitly
positioned. Legacy fullscreen windows are also at 0,0 but these are
detected earlier.
Explicitly store the window position at map request time to detect
client-positioned windows, and use it as the suggested initial position.
weston_wm_window::x and y have been overwritten due to reparenting when
we eventually need the initial position.
This patch requires that the new set_toplevel_with_position() hook is
implemented in the shell.
Note that this patch is about positioning xwayland toplevels, not
override-redirect windows which are already handled.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
X11 applications expect -geometry command line option to work for
setting the initial window position, but currently this does not work.
Add provision to relay the initial position through libweston-desktop:
- weston_desktop_api gains a new entry set_xwayland_position
- implement set_toplevel_with_position() in xwayland internal interface
Once xwayland plugin starts calling set_toplevel_with_position(),
libweston-desktop can relay that information to a shell if the shell
wants to hear it.
If a shell does not implement the set_xwayland_position hook, the
old behaviour remains: the shell positions xwayland toplevels like any
other.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Add a new entry to the internal interface between the xwayland plugin
and libweston-desktop (or any other desktop protocol implementation).
The new entry is identical to set_toplevel except it carries an absolute
position for the toplevel window.
Following patches will implement this new entry in
libweston-desktop and start using it in XWM.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
To reproduce the problem:
- start weston (x11 backend worked, glamor in Xwayland makes no
difference)
- start xterm
- very very slowly move the pointer in the xterm decorations onto or
away from a button
- the moment the decorations are updated, they will appear incomplete,
e.g. completely without buttons and title text
- if you cause just one more pointer motion event, the decorations will
update to completely drawn appearance
Another way to reproduce the problem is to have an xterm and change its
window title. This is easy if you use a shell prompt that updates the
terminal window title. When the title updates, decorations will be
half-drawn until something happens in XWM.
The fix: flush.
Apparently the drawing commands did not get flushed to the X server
until any other X11 action pushed them through.
xcb_flush() is the real fix here. cairo_surface_flush() is added just
for good measure, because documentation indicates it would be better
used, however it was not strictly necessary to fix the problem in my
experiments.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
This avoids loading a shell as a module, so we are sure to have only one
shell loaded at a time.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Use different functions so we cannot load a libweston common module in
weston directly or the other way around.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This prevents loading a backend as a simple module. This will avoid
messing up with backends when we will introduce libweston common
modules.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Modules are using libweston symbols (at least weston_log) and should
explicitly link to it.
This patch also reorders some flags.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
As an option, allow to specify a mode (from the configuration file) by
its refresh rate.
Example of valid syntax:
- "mode=1920x1080" Select a 1920x1080 mode, refresh rate undefined.
- "mode=1920x1080@60" Select the (or one of the) 1920x1080 60 Hz mode.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Currently, layers’ order depends on the module loading order and it does
not survive runtime modifications (like shell locking/unlocking).
With this patch, modules can safely add their own layer at the expected
position in the stack, with runtime persistence.
v4 Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
[Pekka: fix three whitespace issues]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Obviously unused. Looks like weston_wm_window_activate() is doing that
job.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Changing the opaque region has no immediate effect, therefore there is
no need to mark the view geometry dirty.
The view geometry will be invalidated automatically by the next commit
from Xwayland, in weston_surface_commit_state(). The dirtying did not
apply pending state.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Use wm_log_continue() to avoid printing the timestamp in the middle of a
message.
Print the name of the property that got deleted.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
For every event we handle and that delivers the override-redirect flag,
print it to debug log.
Add a comment to one code path explaining when it gets hit, because it
is unobvious. It also serves as a reminder that we do not handle changes
to the OR flag after Window creation.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Move the calls to set_title() and set_pid() out of
weston_wm_window_read_properties() and into the three callers, each
slightly different.
xserver_map_shell_surface(): already calls these functions after
creating the shell surface, so no need to add calls.
weston_wm_handle_map_request(): can be called only on unmapped (in X11)
Windows, so no need to add calls.
weston_wm_window_draw_decoration(): window->shsurf and window->surface
are either both set or both NULL, so the check for window->shsurf is
removed when moving the set_title() and set_pid() calls under a
window->surface check.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
The only thing using the frame title is frame_repaint(). Move the call
to frame_set_title() from weston_wm_window_read_properties() into
weston_wm_window_draw_decoration() where the only call to
frame_repaint() is.
Do not check for window->name == NULL, because frame_set_title() handles
NULL just fine. Also, once window->name becomes set, it cannot become
NULL again unless strndup() fails. The name string can be reset to
the empty string in any case.
This change is prompted by future refactoring where at
weston_wm_window_read_properties() time the frame might not have been
created yet.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
The props array contained offsets to struct members. It is convenient
for writing static const arrays as you only store a constant offset and
compute the pointer later. However, the array was not static to begin
with, the atoms are not build time constants. We can as well just store
the pointer directly in the array.
Entries that did not use the offset had bogus offsets, producing
pointers to arbitrary fields. They are changed to have a NULL pointer.
If the code unintentionally used the pointer, it will now explode rather
than corrupt memory.
Also explain the use of the #defined constants and #undef them when they
get out of scope. This clearly documents that they are just a convenient
hack to avoid lots of special cases in the function.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
The legacy fullscreen state needs to be detected at MapRequest time,
because that is when the X11 client has alredy set up the initial window
state.
Doing it at xserver_map_shell_surface() meant that it would be done as a
response to Xwayland creating the wl_surface and XWM receiving the
WL_SURFACE_ID ClientMessage, whichever came later. At that point the X11
client might still be setting things up in theory, though in practice
most of the X11 communication has already happened when
xserver_map_shell_surface() gets called.
The real reason for this is to clean up xserver_map_shell_surface() from
everything that would affect drawing the decorations. This patch is one
part of that clean-up.
The weston_output_weak_ref logic is not put into compositor.h, because
there are no other users for it at this time. We need to protect against
the output going away.
A side-effect of this patch is that saved_width and saved_height will
now get overwritten also for legacy fullscreen windows. Previously, they
were left to zero as far as I could tell.
NOTE: This stops override-redirect legacy fullscreen windows from being
detected as fullscreen. MapRequest processing does not happen for OR
windows. These windows get detected as type XWAYLAND instead.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Helps tracking what happens with XWM.
Use the same debugging guard as XWM.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Add WM debug prints on map, decoration drawing and geometry setting.
These help see the sequence and timing of operations, when debugging
Xwayland window management glitches.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
This can happen if you right-click in weston-terminal a few times very quickly.
The pointer_handle_enter callback already checks for NULL, so let's do that in
keyboard_handle_enter, too.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
HAVE_PANGO is not in any AC_DEFINE(), so the check is just wrong.
g_type_init() was never called, which is fine since GLib 2.36 anyway.
It is better not to have a wrong usage of HAVE_PANGO here.
Just check for GLib 2.36 in configure.ac instead.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
It was renamed from panel-location in
55d5701ddf, and gained a few possible
values.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The manpage claims that none is valid, so let's make it so.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
The desktop-shell output destroy code assumes that we always set up a
panel listener. Initialise its list explicitly, so if we don't have a
panel, then we can still unconditionally destroy the listener on output
destroy.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
This makes the background image look much nicer, at the expense of
slightly more memory bandwidth used.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We had two non-pkg-config check paths in the configure script, to
support XCB functionality used before XCB had had an accompanying
release: xcb_poll_for_queued_event (released in 1.8, 2012), and a
usable XKB event mechanism (released in 1.9, 2013).
Convert the former to a version-based hard dependency, and the latter to
a version-based soft dependency. This avoids two compiler checks.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Some variables were previously only set inside conditions, making their
output empty.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Peter Hutterer
Pekka Paalanen
Ben
Quentin Glidic
Fabien Dessenne
Armin Krezović
Dima Ryazanov
Daniel Stone
Emmanuel Gil Peyrot
Yann E. MORIN
Abdur Rehman