The compositor's output_created signal used to be sent in weston_output_init()
which the backend call before putting the output in the output_list.
This caused problems when creating a new view in a listener to that signal,
because weston_view_assign_output() doesn't yet know the new output exists.
To fix this add a new weston_composito_add_output() func which adds the
output in the list and later sends the signal, and make the backends call
that.
Create a new function weston_compositor_read_presentation_clock() to
wrap the clock_gettime() call for the Presentation clock.
Reading the presentation clock is never supposed to fail, but if it
does, this will notify about it. I have not seen it fail yet, though.
This prepares for new testing features in the future that might allow
controlling the presentation clock. Right now it is just a convenience
function for clock_gettime().
All presentation clock readers are converted to call this new function
except rpi-backend's rpi_flippipe_update_complete(), because it gets its
clock id via a thread-safe mechanism. There shouldn't be anything really
thread-unsafe in weston_compositor_read_presentation_clock() at the
moment, but might be in the future, and weston core is not expected to
need to be thread-safe.
This is based on the original patch by
Cc: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Change weston_output_finish_frame() signature so that backends are
required to set the flags, that will be reported on the Presentation
'presented' event. This is meant for output-wide feedback flags. Flags
that vary per wl_surface are subject for the following patch.
All start_repaint_loop functions use the special private flag
PRESENTATION_FEEDBACK_INVALID to mark, that this call of
weston_output_finish_frame() cannot trigger the 'presented' event. If it
does, we now hit an assert, and should then investigate why a fake update
triggered Presentation feedback.
DRM:
Page flip is always vsync'd, and always gets the completion timestamp
from the kernel which should correspond well to hardware. Completion is
triggered by the kernel/hardware.
Vblank handler is only used with the broken planes path, therefore do
not report VSYNC, because we cannot guarantee all the planes updated at
the same time. We cannot set the INVALID, because it would abort the
compositor if the broken planes path was ever used. This is a hack that
will get fixed with nuclear pageflip support in the future.
fbdev:
No vsync, update done by copy, no completion event from hardware, and
completion time is totally fake.
headless:
No real output to update.
RDP:
Guessing that maybe no vsync, fake time, and copy make sense (pixels
sent over network). Also no event that the pixels have been shown?
RPI:
Presumably Dispmanx updates are vsync'd. We get a completion event from
the driver, but need to read the clock ourselves, so the completion time
is somewhat unreliable. Zero-copy flag not implemented though it would
be theoretically possible with EGL clients (zero-copy is a per-surface
flag anyway, so in this patch).
Wayland:
No information how the host compositor is doing updates, so make a safe
guess without assuming vsync or hardware completion event. While we do
get some timestamp from the host compositor, it is not the completion
time. Would need to hook to the Presentation extension of the host
compositor to get more accurate flags.
X11:
No idea about vsync, completion event, or copying. Also the timestamp is
a fake.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Mario Kleiner <mario.kleiner.de@gmail.com>
This breaks weston_output_mode_switch() into 3 functions:
weston_output_mode_set_native()
weston_output_mode_switch_to_temporary()
weston_output_mode_switch_to_native()
Differences from previous behaviour:
SET_NATIVE didn't set current_scale (now it does)
SET_TEMPORARY could set mode and scale independently - now it can't.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add presentation clock setters that verify the given clock actually
works. Offer an automatic choice of a software fallback clock, when a
backend has to always use clock_gettime() to approximate the
presentation time.
The DRM backend already queried the DRM about the clock id, just let the
DRM backend set the presentation clock from that.
For all other backends which do not get a timestamp from the driver,
call the software clock setter to choose a suitable clock.
Report the chosen clock via presentation.clock_id event to clients.
In finish_frame(), upgrade the argument from uint32_t milliseconds to
struct timespec which can accurately hold the presentation clock values.
This will be needed when weston_output_finish_frame() starts to send out
presentation_feedback.presented events.
While at it, replace gettimeofday() calls with clock_gettime() using the
chosen presentation clock, so we manufacture presentation timestamps
from the presentation clock when the gfx drivers cannot give us a proper
timestamp.
Rpi patch is more verbose due to not having the compositor pointer
available in rpi_flippipe_update_complete(). Explicitly carry the clock
id with flippipe so it is available in the thread.
Changes in v4:
* rpi debug build fix
v4 Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v3 Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
This patch adds an option to the RDP compositor to disable
desktop resizes initiated by RDP peer. The current behaviour
is that if an incoming RDP peer suggests a resolution that is
not the current one, a mode_switch() is done and the desktop is
resized to that new resolution. This new flag allows to disable
that behaviour. If the flag is set, the new behaviour is that the
RDP peer will be instructed to resize to the size of the desktop.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The CURSOR_PLANE capability indicates that the backend has a concept of a
cursor plane and can handle a cursor without compositing. This is currently
only advertised by the DRM backend.
The ARBITRARY_MODE flag specifies that the backend is capable of switching to
virtually any resolution. This is currently only advertised in the RDP
backend. While it's a bit buggy right now, it should be capable of this.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
This patch removes the extra modes parameter for the RDP compositor. And
make it support any mode that is requested (be aware that RDP client may not
support all possible modes, especially odd resolution).
This new version fixes remarks done by Jason Ekstrand. It also fixes
some missing spaces between if and (.
The API to use remoteFx encoding has changed between master and stable 1.1
branch. This patch should fix compilation for both.
This new version adds checks for the freerdp/version.h file
Currently we destroy the renderer before the outputs are destroyed, but
that sometimes leads to an error since a reference to the renderer is
necessary in order to destroy a gl_renderer_output.
Since destroying the renderer is common among all backends, just move
that call into weston_compositor_shutdown() immediately after the
outputs being destroyed.
If we are about to finish a frame, but a redraw is pending and we let the
compositor redraw, we need to check for errors. If the redraw fails and
the backend cannot schedule a page-flip, we need to finish the frame,
anyway.
All backends except DRM use a timer to schedule frames. Hence, they cannot
fail. But for DRM, we need to be able to handle drmModePageFlip() failures
in case access got revoked.
This fixes a bug where logind+drm caused keyboard input to be missed as we
didn't reenable it after a failed page-flip during deactivation.
This patch implements the notification of clients during mode_switch.
As discussed on IRC, clients are notified of mode_switch only when the
"native" mode is changed and activated. That means that if the native
mode is changed and the compositor had activated a temporary mode for
a fullscreen surface, the clients will be notified only when the native
mode is restored.
The scaling factor is treated the same way as modes.
This patch fixes a bug found by Marek Romanowic: the RDP peer output must
be enabled by default, or we have to unfocus/focus the RDP client window to
have disable/enable output messages sent (and finally receive updates).
AC_USE_SYSTEM_EXTENSIONS enables _XOPEN_SOURCE, _GNU_SOURCE and similar
macros to expose the largest extent of functionality supported by the
underlying system. This is required since these macros are often
limiting rather than merely additive, e.g. _XOPEN_SOURCE will actually
on some systems hide declarations which are not part of the X/Open spec.
Since this goes into config.h rather than the command line, ensure all
source is consistently including config.h before anything else,
including system libraries. This doesn't need to be guarded by a
HAVE_CONFIG_H ifdef, which was only ever a hangover from the X.Org
modular transition.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
[pq: rebased and converted more files]
This patch does miscellanous improvements with raw surfaces:
* some frames markers are sent to identify a single frame made of
multiple surface updates
* we send the dirty sub-rectangles instead of the full bouncing box
* the size of the fragmentation buffer is now honored, so that our big
surface updates don't look like a DoS
* the subtile and image flipping are done in one step (not requiring a
temporary tile)
* we don't care about the size of the dirty region and always use the
preferred codec for surface update
Last FreeRDP don't send Synchronize packets anymore, so send the
first screen refresh when we're "connected". The client cursor is
also disabled during this step.
This patch fixes NSC codec initialisation that was not done (an
erronous copy'n paste).
The remoteFx context must be resetted when we go through an activation
sequence
The stream utils of FreeRDP have changed recently, this patch fixes
the compositor compilation against FreeRdp master.
The backend_init() prototype has changed too, this fixes it.
This set of changes adds support for searching for a given config file
in the directories listed in $XDG_CONFIG_DIRS if it wasn't found in
$XDG_CONFIG_HOME or ~/.config. This allows packages to install custom
config files in /etc/xdg/weston, for example, thus allowing them to
avoid dealing with home directories.
To avoid a TOCTOU race the config file is actually open()ed during the
search. Its file descriptor is returned and stored in the compositor
for later use when performing subsequent config file parses.
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
The keycodes received by the FreeRDP server aren't evdev keycodes.
This patch adds the correct convertion to evdev keycodes. After the
patch all keys that are marked as extended in RDP packets become
functionnal (that's the case for the windows key).
Please note that this patch rely on some corrections that have been
pushed on the FreeRDP github tonight.
Most backends relies on gettimeofday(2) for output repaint timestamps
but this is not a requirement. Before this patch repaints coming from
idle_repaint() always used gettimeofday(2) for timestamps. For backends
not using that time source this could cause large jumps between
timestamps.
To fix this, timestamps needs to always come from the backend. This
means that the backend needs to always be responsible of starting the
repaint loop in case that the repaint cannot start immediately.
The drm backend implementation is from the patch by Ander Conselvan de
Oliveira found here:
http://lists.freedesktop.org/archives/wayland-devel/2013-February/007393.html
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
This patch is the 6th version of the FreeRDP based compositor.
Changes from last version:
* use pixman_image_get_stride() when appropriate
* always realloc
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Giulio Camuffo
Pekka Paalanen
Derek Foreman
Hardening
Jason Ekstrand
Ander Conselvan de Oliveira
David Herrmann
Peter Hutterer
Daniel Stone
Rob Bradford
Kristian Høgsberg
Ossama Othman
Jonas Ådahl