If there are several things that cause an exit, keep the error code from
the first one, not the last one. The latter ones could be just fallout
from the first.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Currently, once we've reached our main's wl_display_run(), we always
return ret=EXIT_SUCCESS when weston terminates through wl_display_terminate.
This patch makes it possible to specify another return value by setting
prior to terminating Weston. This is useful for automated tests that want
to report test failures to the overlying testing infrastructure.
Signed-off-by: Frederic Plourde <frederic.plourde@collabora.co.uk>
[Pekka: fixed some tabs.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
weston key bindings are supposed to eat the key events, and not pass it
on to clients, and indeed the wl_keyboard.key event is not sent. But
we must also not put the key in the keys array to pass to client with
the wl_keyboard.enter event, or else we may send the 'eaten' one too.
In the case of a key binding hiding a surface having the keyboard focus,
the shell may decide to give the focus to another surface, but that will
happen before the key is released, so the new focus surface will receive
the code of the bound key in the wl_keyboard.enter array.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This patch fixes a couple of misuses around .TP 7 macros that wrongly
limited right margins and relative identation.
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
There are a number of invalid read errors reported by valgrind of the
form:
==13428== Invalid read of size 4
==13428== at 0x405656: advect (smoke.c:116)
==13428== by 0x405E80: redraw_handler (smoke.c:228)
==13428== by 0x40DE74: widget_redraw (window.c:3995)
==13428== by 0x40E02D: surface_redraw (window.c:4053)
==13428== by 0x40E0C9: idle_redraw (window.c:4082)
==13428== by 0x410FC9: display_run (window.c:5561)
==13428== by 0x406518: main (smoke.c:373)
==13428== Address 0xb2c9b14 is 4 bytes after a block of size
160,000 alloc'd
==13428== at 0x4C29DB4: calloc
==13428== by 0x40646B: main (smoke.c:360)
This results in invalid rendering when running a debug version of the
application.
Fix the issue by limiting the maximum values of px and py to 1.5 less
than width and height. This prevents reading past the end of the source
buffer.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=82287
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Committing to an xdg_surface with a NULL buffer is currently illegal in
the mutter implementation, so this simply causes the client to error and
exit.
It seems the reason the client did this was so it could add its own
frame callback, but toytoolkit actually provides accurate everything we
need. Just use its functions instead to get the time and schedule a
redraw.
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
the keyboard focus surface may not have a valid resource (server side
surface or a surface surviving its client), so check if it is valid
before using it.
Acked-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The comments already call it bool, so let's just make it one
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
commit 6ae7bc982f accidentally made weston_output_mode_switch_temporary
send done events when it shouldn't.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
use wl_list_for_each_safe to iterate on the bindings list when
firing them, this way a binding can safely be destroyed in its
function handler.
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This breaks weston_output_mode_switch() into 3 functions:
weston_output_mode_set_native()
weston_output_mode_switch_to_temporary()
weston_output_mode_switch_to_native()
Differences from previous behaviour:
SET_NATIVE didn't set current_scale (now it does)
SET_TEMPORARY could set mode and scale independently - now it can't.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Commit 280e7dd918 introduced a bug in the
return value of weston_subsurface_is_synchronized().
Signed-off-by: Carlos Olmedo Escobar <carlos.olmedo.e@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
For functions that test if something is true/valid and return a 1
or 0, it makes sense to switch to bool.
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
output_rotate_damage shifted an array of pixman regions with a loop. Now
it uses an index into that array.
This currently only saves 1 pixman_region32_copy, but we can now raise
BUFFER_DAMAGE_COUNT without a performance impact if we run into a
configuration where this is useful.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Add tests for triggering the role conflict when a wl_surface is already
a wl_shell_surface and then attempted to be made into a sub-surface, and
vice versa.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
With the more accurate definition of wl_surface roles in Wayland,
enforce the restriction: a role is always set permanently, and
attempting to change it is a protocol error.
This patch is based on Jasper's patch:
http://lists.freedesktop.org/archives/wayland-devel/2014-August/016811.html
The difference in this patch compared to his are:
- send role errors on the interface whose request triggers it, not on
wl_surface
- an interface could have several requests assigning different roles,
cannot use wl_interface as the unique key; use an arbitary string
instead
- ensure in window-manager.c that create_shell_surface() ->
create_common_surface() is never called with surface->configure set,
to avoid compositor abort
- use wl_resource_post_no_memory() where appropriate instead of
hand-rolling it with wl_resource_post_error()
Ideally we would not add weston_surface::role_name field, but use
weston_surface::configure. At the moment this is not possible though,
because at least shell.c uses several different roles with the same
configure function. Drag'n'drop uses two configure functions for the
same role. The configure hook is also reset in several places,
which is not good for role tracking.
This patch overlooks the wl_surface roles assigned in privileged
extensions: screensaver, panel, background, lock, input panel.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Needed for properly reporting role violations from
xdg_shell.get_xdg_surface and .get_xdg_popup.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Acked-by: Jason Ekstrand <jason.ekstrand@intel.com>
Noticed while reading code, that create_common_surface() may return
NULL, and callers of its direct callers check for NULL, but the
intermediate function in between would crash.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This started as a copy of simple-shm.c before it was converted to
xdg_shell.
This demo excercises the presentation feedback interface in five
different modes:
- A continuous repaint loop triggered by frame callbacks, and using
immediate commits, just gathering presentation feedback and computing
some time intervals for statistics.
- The same as above, except with 1s sleep before actually repainting as
a response to frame callback. This tests how well the compositor can
do a repaint from idle state (not continuously repainting), assuming
nothing else is causing repaints.
- A continuous repaint loop triggered by 'presented' events rather than
by frame callbacks. If Weston uses an appropriate scheduling
algorithm, this mode achieves the smallest possible frame latency
(below one output refresh period).
In all modes, all frames are pre-rendered at startup, so no rendering
happens during the animation.
[Louis-Francis Ratté-Boulianne: split queuing feature]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Add 'msc' field to weston_output to maintain the refresh counter, and
use it in presentation_feedback.presented.
Make compositor-drm update the per-output refresh counter with the
values reported by DRM. If the DRM reported value jumps backwards,
assume it wrapped around once.
Other backends do not update weston_output::msc, and there
presentation_feedback will always deliver refresh counter as zero.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v3 Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Implement the presentation.feedback request, and the
presentation_feedback protocol interface. Feedback information is
delivered to clients as the backend reports it, except the refresh
counter (MSC) which is always reported as zero.
Changes in v4:
* add 'flags' argument to 'presented' event without implementation
Changes in v5:
* remove the 'destroy' method implementation for feedback objects
[Pekka Paalanen: do not leak struct feedback.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v3 Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Add presentation clock setters that verify the given clock actually
works. Offer an automatic choice of a software fallback clock, when a
backend has to always use clock_gettime() to approximate the
presentation time.
The DRM backend already queried the DRM about the clock id, just let the
DRM backend set the presentation clock from that.
For all other backends which do not get a timestamp from the driver,
call the software clock setter to choose a suitable clock.
Report the chosen clock via presentation.clock_id event to clients.
In finish_frame(), upgrade the argument from uint32_t milliseconds to
struct timespec which can accurately hold the presentation clock values.
This will be needed when weston_output_finish_frame() starts to send out
presentation_feedback.presented events.
While at it, replace gettimeofday() calls with clock_gettime() using the
chosen presentation clock, so we manufacture presentation timestamps
from the presentation clock when the gfx drivers cannot give us a proper
timestamp.
Rpi patch is more verbose due to not having the compositor pointer
available in rpi_flippipe_update_complete(). Explicitly carry the clock
id with flippipe so it is available in the thread.
Changes in v4:
* rpi debug build fix
v4 Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v3 Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
You can bind to the global interface, and it delivers a fake clock id.
All requests on it raise an error.
Changes in v4:
* queuing methods were extractracted for a later series
[Louis-Francis Ratté-Boulianne: split queuing feature]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Add accurate presentation timing features to Wayland: queueing and
feedback.
This specification is based on the draft written by Frederic Plourde
<frederic.plourde@collabora.co.uk> and redesigned by Pekka Paalanen.
The RFC v2 version is from
http://lists.freedesktop.org/archives/wayland-devel/2014-January/012988.html
Changes in v3:
* associate presentation time to current surface contents
This implements the suggestion from
http://lists.freedesktop.org/archives/wayland-devel/2014-February/013066.html
which prevents surface content from jumping backwards in time if a
client retroactively queues an update with a target time in the past.
* use 64-bit tv_sec in presentation
The time_t type used in struct timespec could be almost anything. POSIX
probably defines it to be an integer, but not the size. Apparently it is
usually 'long', which makes it 64-bit on x86_64.
To be able to fully represent timespec values returned by clock_gettime,
change the protocol to use 64 bits for the tv_sec part.
* define an error for invalid tv_nsec
This allow us to rely on the normalized timestamp form.
* define some interactions with sub-surfaces
Sub-surface cached state updates (synchronized mode) are designed
especially for resizing. As queued updates are not meant to produce any
resizing-like effects, they also do not trigger any sub-surface
operations.
* add sub-headings as xml comments
* queued update cannot map
Because before mapping, the surface has no main output assigned. An
immediate commit is needed anyway, to be able to set all the surface
state, which a queued update cannot touch.
* frame callbacks are not queued
It is not known when queueing frame callbacks would be useful.
Changes in v4:
* remove mentions of the queuing feature
The specification has been split and the queuing feature will be added
back in another version of the extension.
* add flags argument to 'presented' event
Describe the nature of how the update was presented to screen and the
characteristics of the feedback information. No flags have been
defined for now.
* add a protocol error code for invalid flags
Changes in v5:
* remove the destroy method for the feedback object
The protocol object should instead be automatically destroyed after
a 'presented' or 'discarded' event has been triggered.
* some grammatical corrections to the specification
[Louis-Francis Ratté-Boulianne: split the spec in two parts]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
v3 Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Calling weston_output_mode_switch() with WESTON_MODE_SWITCH_RESTORE_NATIVE
will result in the mode being set "back" to the passed in mode - so the
passed mode should be the native mode.
Additionally, weston_output_mode_switch() should be called when
output->original_mode is non-NULL (which indicates we had a temporary
mode set). The comparison to current_mode results in a lot of
log chatter.
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Most of the code only puts WL_EXPORT in .c files. Remove the few
instances in header files.
If it's missing form the associated .c, put it there instead.
When a toytoolkit client redraws, the toolkit syncs the parent and
geometry. If a client redraws often (such as the terminal drawing a huge
amount of output), this can spam the compositor with requests and may
result in the client's eventual being killed.
We don't need to send requests for changing the geometry or parent if
these haven't changed. So remember the last geometry and parent, and
update them only if needed.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=83297
Signed-off-by: Ondřej Majerech <majerech.o@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Pekka Paalanen
Frederic Plourde
Giulio Camuffo
Bryce Harrington
Frank Binns
Jasper St. Pierre
Derek Foreman
Carlos Olmedo Escobar
kabeer khan
Daniel Stone
Xiong Zhang
Olivier Blin
Jason Ekstrand
Ondřej Majerech