/* * Copyright © 2008-2011 Kristian Høgsberg * Copyright © 2011 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining * a copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sublicense, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial * portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #include "config.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "compositor.h" #include "compositor-drm.h" #include "shared/helpers.h" #include "shared/timespec-util.h" #include "gl-renderer.h" #include "pixman-renderer.h" #include "libbacklight.h" #include "libinput-seat.h" #include "launcher-util.h" #include "vaapi-recorder.h" #include "presentation-time-server-protocol.h" #include "linux-dmabuf.h" #ifndef DRM_CAP_TIMESTAMP_MONOTONIC #define DRM_CAP_TIMESTAMP_MONOTONIC 0x6 #endif #ifndef DRM_CAP_CURSOR_WIDTH #define DRM_CAP_CURSOR_WIDTH 0x8 #endif #ifndef DRM_CAP_CURSOR_HEIGHT #define DRM_CAP_CURSOR_HEIGHT 0x9 #endif #ifndef GBM_BO_USE_CURSOR #define GBM_BO_USE_CURSOR GBM_BO_USE_CURSOR_64X64 #endif struct drm_backend { struct weston_backend base; struct weston_compositor *compositor; struct udev *udev; struct wl_event_source *drm_source; struct udev_monitor *udev_monitor; struct wl_event_source *udev_drm_source; struct { int id; int fd; char *filename; } drm; struct gbm_device *gbm; uint32_t *crtcs; int num_crtcs; uint32_t crtc_allocator; uint32_t connector_allocator; struct wl_listener session_listener; uint32_t gbm_format; /* we need these parameters in order to not fail drmModeAddFB2() * due to out of bounds dimensions, and then mistakenly set * sprites_are_broken: */ uint32_t min_width, max_width; uint32_t min_height, max_height; int no_addfb2; struct wl_list sprite_list; int sprites_are_broken; int sprites_hidden; int cursors_are_broken; int use_pixman; uint32_t prev_state; struct udev_input input; int32_t cursor_width; int32_t cursor_height; /** Callback used to configure the outputs. * * This function will be called by the backend when a new DRM * output needs to be configured. */ enum weston_drm_backend_output_mode (*configure_output)(struct weston_compositor *compositor, bool use_current_mode, const char *name, struct weston_drm_backend_output_config *output_config); bool use_current_mode; }; struct drm_mode { struct weston_mode base; drmModeModeInfo mode_info; }; struct drm_fb { uint32_t fb_id, stride, handle, size; int fd; int is_client_buffer; struct weston_buffer_reference buffer_ref; /* Used by gbm fbs */ struct gbm_bo *bo; /* Used by dumb fbs */ void *map; }; struct drm_edid { char eisa_id[13]; char monitor_name[13]; char pnp_id[5]; char serial_number[13]; }; struct drm_output { struct weston_output base; uint32_t crtc_id; int pipe; uint32_t connector_id; drmModeCrtcPtr original_crtc; struct drm_edid edid; drmModePropertyPtr dpms_prop; uint32_t gbm_format; enum dpms_enum dpms; int vblank_pending; int page_flip_pending; int destroy_pending; struct gbm_surface *gbm_surface; struct gbm_bo *gbm_cursor_bo[2]; struct weston_plane cursor_plane; struct weston_plane fb_plane; struct weston_view *cursor_view; int current_cursor; struct drm_fb *current, *next; struct backlight *backlight; struct drm_fb *dumb[2]; pixman_image_t *image[2]; int current_image; pixman_region32_t previous_damage; struct vaapi_recorder *recorder; struct wl_listener recorder_frame_listener; }; /* * An output has a primary display plane plus zero or more sprites for * blending display contents. */ struct drm_sprite { struct wl_list link; struct weston_plane plane; struct drm_fb *current, *next; struct drm_output *output; struct drm_backend *backend; uint32_t possible_crtcs; uint32_t plane_id; uint32_t count_formats; int32_t src_x, src_y; uint32_t src_w, src_h; uint32_t dest_x, dest_y; uint32_t dest_w, dest_h; uint32_t formats[]; }; static struct gl_renderer_interface *gl_renderer; static const char default_seat[] = "seat0"; static void drm_output_set_cursor(struct drm_output *output); static void drm_output_update_msc(struct drm_output *output, unsigned int seq); static int drm_sprite_crtc_supported(struct drm_output *output, uint32_t supported) { struct weston_compositor *ec = output->base.compositor; struct drm_backend *b =(struct drm_backend *)ec->backend; int crtc; for (crtc = 0; crtc < b->num_crtcs; crtc++) { if (b->crtcs[crtc] != output->crtc_id) continue; if (supported & (1 << crtc)) return -1; } return 0; } static void drm_fb_destroy_callback(struct gbm_bo *bo, void *data) { struct drm_fb *fb = data; struct gbm_device *gbm = gbm_bo_get_device(bo); if (fb->fb_id) drmModeRmFB(gbm_device_get_fd(gbm), fb->fb_id); weston_buffer_reference(&fb->buffer_ref, NULL); free(data); } static struct drm_fb * drm_fb_create_dumb(struct drm_backend *b, unsigned width, unsigned height, uint32_t format) { struct drm_fb *fb; int ret; uint32_t bpp, depth; struct drm_mode_create_dumb create_arg; struct drm_mode_destroy_dumb destroy_arg; struct drm_mode_map_dumb map_arg; fb = zalloc(sizeof *fb); if (!fb) return NULL; switch (format) { case GBM_FORMAT_XRGB8888: bpp = 32; depth = 24; break; case GBM_FORMAT_RGB565: bpp = depth = 16; break; default: return NULL; } memset(&create_arg, 0, sizeof create_arg); create_arg.bpp = bpp; create_arg.width = width; create_arg.height = height; ret = drmIoctl(b->drm.fd, DRM_IOCTL_MODE_CREATE_DUMB, &create_arg); if (ret) goto err_fb; fb->handle = create_arg.handle; fb->stride = create_arg.pitch; fb->size = create_arg.size; fb->fd = b->drm.fd; ret = -1; if (!b->no_addfb2) { uint32_t handles[4], pitches[4], offsets[4]; handles[0] = fb->handle; pitches[0] = fb->stride; offsets[0] = 0; ret = drmModeAddFB2(b->drm.fd, width, height, format, handles, pitches, offsets, &fb->fb_id, 0); if (ret) { weston_log("addfb2 failed: %m\n"); b->no_addfb2 = 1; } } if (ret) { ret = drmModeAddFB(b->drm.fd, width, height, depth, bpp, fb->stride, fb->handle, &fb->fb_id); } if (ret) goto err_bo; memset(&map_arg, 0, sizeof map_arg); map_arg.handle = fb->handle; ret = drmIoctl(fb->fd, DRM_IOCTL_MODE_MAP_DUMB, &map_arg); if (ret) goto err_add_fb; fb->map = mmap(NULL, fb->size, PROT_WRITE, MAP_SHARED, b->drm.fd, map_arg.offset); if (fb->map == MAP_FAILED) goto err_add_fb; return fb; err_add_fb: drmModeRmFB(b->drm.fd, fb->fb_id); err_bo: memset(&destroy_arg, 0, sizeof(destroy_arg)); destroy_arg.handle = create_arg.handle; drmIoctl(b->drm.fd, DRM_IOCTL_MODE_DESTROY_DUMB, &destroy_arg); err_fb: free(fb); return NULL; } static void drm_fb_destroy_dumb(struct drm_fb *fb) { struct drm_mode_destroy_dumb destroy_arg; if (!fb->map) return; if (fb->fb_id) drmModeRmFB(fb->fd, fb->fb_id); weston_buffer_reference(&fb->buffer_ref, NULL); munmap(fb->map, fb->size); memset(&destroy_arg, 0, sizeof(destroy_arg)); destroy_arg.handle = fb->handle; drmIoctl(fb->fd, DRM_IOCTL_MODE_DESTROY_DUMB, &destroy_arg); free(fb); } static struct drm_fb * drm_fb_get_from_bo(struct gbm_bo *bo, struct drm_backend *backend, uint32_t format) { struct drm_fb *fb = gbm_bo_get_user_data(bo); uint32_t width, height; uint32_t handles[4], pitches[4], offsets[4]; int ret; if (fb) return fb; fb = zalloc(sizeof *fb); if (fb == NULL) return NULL; fb->bo = bo; width = gbm_bo_get_width(bo); height = gbm_bo_get_height(bo); fb->stride = gbm_bo_get_stride(bo); fb->handle = gbm_bo_get_handle(bo).u32; fb->size = fb->stride * height; fb->fd = backend->drm.fd; if (backend->min_width > width || width > backend->max_width || backend->min_height > height || height > backend->max_height) { weston_log("bo geometry out of bounds\n"); goto err_free; } ret = -1; if (format && !backend->no_addfb2) { handles[0] = fb->handle; pitches[0] = fb->stride; offsets[0] = 0; ret = drmModeAddFB2(backend->drm.fd, width, height, format, handles, pitches, offsets, &fb->fb_id, 0); if (ret) { weston_log("addfb2 failed: %m\n"); backend->no_addfb2 = 1; backend->sprites_are_broken = 1; } } if (ret) ret = drmModeAddFB(backend->drm.fd, width, height, 24, 32, fb->stride, fb->handle, &fb->fb_id); if (ret) { weston_log("failed to create kms fb: %m\n"); goto err_free; } gbm_bo_set_user_data(bo, fb, drm_fb_destroy_callback); return fb; err_free: free(fb); return NULL; } static void drm_fb_set_buffer(struct drm_fb *fb, struct weston_buffer *buffer) { assert(fb->buffer_ref.buffer == NULL); fb->is_client_buffer = 1; weston_buffer_reference(&fb->buffer_ref, buffer); } static void drm_output_release_fb(struct drm_output *output, struct drm_fb *fb) { if (!fb) return; if (fb->map && (fb != output->dumb[0] && fb != output->dumb[1])) { drm_fb_destroy_dumb(fb); } else if (fb->bo) { if (fb->is_client_buffer) gbm_bo_destroy(fb->bo); else gbm_surface_release_buffer(output->gbm_surface, fb->bo); } } static uint32_t drm_output_check_scanout_format(struct drm_output *output, struct weston_surface *es, struct gbm_bo *bo) { uint32_t format; pixman_region32_t r; format = gbm_bo_get_format(bo); if (format == GBM_FORMAT_ARGB8888) { /* We can scanout an ARGB buffer if the surface's * opaque region covers the whole output, but we have * to use XRGB as the KMS format code. */ pixman_region32_init_rect(&r, 0, 0, output->base.width, output->base.height); pixman_region32_subtract(&r, &r, &es->opaque); if (!pixman_region32_not_empty(&r)) format = GBM_FORMAT_XRGB8888; pixman_region32_fini(&r); } if (output->gbm_format == format) return format; return 0; } static struct weston_plane * drm_output_prepare_scanout_view(struct drm_output *output, struct weston_view *ev) { struct drm_backend *b = (struct drm_backend *)output->base.compositor->backend; struct weston_buffer *buffer = ev->surface->buffer_ref.buffer; struct weston_buffer_viewport *viewport = &ev->surface->buffer_viewport; struct gbm_bo *bo; uint32_t format; if (ev->geometry.x != output->base.x || ev->geometry.y != output->base.y || buffer == NULL || b->gbm == NULL || buffer->width != output->base.current_mode->width || buffer->height != output->base.current_mode->height || output->base.transform != viewport->buffer.transform || ev->transform.enabled) return NULL; if (ev->geometry.scissor_enabled) return NULL; bo = gbm_bo_import(b->gbm, GBM_BO_IMPORT_WL_BUFFER, buffer->resource, GBM_BO_USE_SCANOUT); /* Unable to use the buffer for scanout */ if (!bo) return NULL; format = drm_output_check_scanout_format(output, ev->surface, bo); if (format == 0) { gbm_bo_destroy(bo); return NULL; } output->next = drm_fb_get_from_bo(bo, b, format); if (!output->next) { gbm_bo_destroy(bo); return NULL; } drm_fb_set_buffer(output->next, buffer); return &output->fb_plane; } static void drm_output_render_gl(struct drm_output *output, pixman_region32_t *damage) { struct drm_backend *b = (struct drm_backend *)output->base.compositor->backend; struct gbm_bo *bo; output->base.compositor->renderer->repaint_output(&output->base, damage); bo = gbm_surface_lock_front_buffer(output->gbm_surface); if (!bo) { weston_log("failed to lock front buffer: %m\n"); return; } output->next = drm_fb_get_from_bo(bo, b, output->gbm_format); if (!output->next) { weston_log("failed to get drm_fb for bo\n"); gbm_surface_release_buffer(output->gbm_surface, bo); return; } } static void drm_output_render_pixman(struct drm_output *output, pixman_region32_t *damage) { struct weston_compositor *ec = output->base.compositor; pixman_region32_t total_damage, previous_damage; pixman_region32_init(&total_damage); pixman_region32_init(&previous_damage); pixman_region32_copy(&previous_damage, damage); pixman_region32_union(&total_damage, damage, &output->previous_damage); pixman_region32_copy(&output->previous_damage, &previous_damage); output->current_image ^= 1; output->next = output->dumb[output->current_image]; pixman_renderer_output_set_buffer(&output->base, output->image[output->current_image]); ec->renderer->repaint_output(&output->base, &total_damage); pixman_region32_fini(&total_damage); pixman_region32_fini(&previous_damage); } static void drm_output_render(struct drm_output *output, pixman_region32_t *damage) { struct weston_compositor *c = output->base.compositor; struct drm_backend *b = (struct drm_backend *)c->backend; if (b->use_pixman) drm_output_render_pixman(output, damage); else drm_output_render_gl(output, damage); pixman_region32_subtract(&c->primary_plane.damage, &c->primary_plane.damage, damage); } static void drm_output_set_gamma(struct weston_output *output_base, uint16_t size, uint16_t *r, uint16_t *g, uint16_t *b) { int rc; struct drm_output *output = (struct drm_output *) output_base; struct drm_backend *backend = (struct drm_backend *) output->base.compositor->backend; /* check */ if (output_base->gamma_size != size) return; if (!output->original_crtc) return; rc = drmModeCrtcSetGamma(backend->drm.fd, output->crtc_id, size, r, g, b); if (rc) weston_log("set gamma failed: %m\n"); } /* Determine the type of vblank synchronization to use for the output. * * The pipe parameter indicates which CRTC is in use. Knowing this, we * can determine which vblank sequence type to use for it. Traditional * cards had only two CRTCs, with CRTC 0 using no special flags, and * CRTC 1 using DRM_VBLANK_SECONDARY. The first bit of the pipe * parameter indicates this. * * Bits 1-5 of the pipe parameter are 5 bit wide pipe number between * 0-31. If this is non-zero it indicates we're dealing with a * multi-gpu situation and we need to calculate the vblank sync * using DRM_BLANK_HIGH_CRTC_MASK. */ static unsigned int drm_waitvblank_pipe(struct drm_output *output) { if (output->pipe > 1) return (output->pipe << DRM_VBLANK_HIGH_CRTC_SHIFT) & DRM_VBLANK_HIGH_CRTC_MASK; else if (output->pipe > 0) return DRM_VBLANK_SECONDARY; else return 0; } static int drm_output_repaint(struct weston_output *output_base, pixman_region32_t *damage) { struct drm_output *output = (struct drm_output *) output_base; struct drm_backend *backend = (struct drm_backend *)output->base.compositor->backend; struct drm_sprite *s; struct drm_mode *mode; int ret = 0; if (output->destroy_pending) return -1; if (!output->next) drm_output_render(output, damage); if (!output->next) return -1; mode = container_of(output->base.current_mode, struct drm_mode, base); if (!output->current || output->current->stride != output->next->stride) { ret = drmModeSetCrtc(backend->drm.fd, output->crtc_id, output->next->fb_id, 0, 0, &output->connector_id, 1, &mode->mode_info); if (ret) { weston_log("set mode failed: %m\n"); goto err_pageflip; } output_base->set_dpms(output_base, WESTON_DPMS_ON); } if (drmModePageFlip(backend->drm.fd, output->crtc_id, output->next->fb_id, DRM_MODE_PAGE_FLIP_EVENT, output) < 0) { weston_log("queueing pageflip failed: %m\n"); goto err_pageflip; } output->page_flip_pending = 1; drm_output_set_cursor(output); /* * Now, update all the sprite surfaces */ wl_list_for_each(s, &backend->sprite_list, link) { uint32_t flags = 0, fb_id = 0; drmVBlank vbl = { .request.type = DRM_VBLANK_RELATIVE | DRM_VBLANK_EVENT, .request.sequence = 1, }; if ((!s->current && !s->next) || !drm_sprite_crtc_supported(output, s->possible_crtcs)) continue; if (s->next && !backend->sprites_hidden) fb_id = s->next->fb_id; ret = drmModeSetPlane(backend->drm.fd, s->plane_id, output->crtc_id, fb_id, flags, s->dest_x, s->dest_y, s->dest_w, s->dest_h, s->src_x, s->src_y, s->src_w, s->src_h); if (ret) weston_log("setplane failed: %d: %s\n", ret, strerror(errno)); vbl.request.type |= drm_waitvblank_pipe(output); /* * Queue a vblank signal so we know when the surface * becomes active on the display or has been replaced. */ vbl.request.signal = (unsigned long)s; ret = drmWaitVBlank(backend->drm.fd, &vbl); if (ret) { weston_log("vblank event request failed: %d: %s\n", ret, strerror(errno)); } s->output = output; output->vblank_pending = 1; } return 0; err_pageflip: output->cursor_view = NULL; if (output->next) { drm_output_release_fb(output, output->next); output->next = NULL; } return -1; } static void drm_output_start_repaint_loop(struct weston_output *output_base) { struct drm_output *output = (struct drm_output *) output_base; struct drm_backend *backend = (struct drm_backend *) output_base->compositor->backend; uint32_t fb_id; struct timespec ts, tnow; struct timespec vbl2now; int64_t refresh_nsec; int ret; drmVBlank vbl = { .request.type = DRM_VBLANK_RELATIVE, .request.sequence = 0, .request.signal = 0, }; if (output->destroy_pending) return; if (!output->current) { /* We can't page flip if there's no mode set */ goto finish_frame; } /* Try to get current msc and timestamp via instant query */ vbl.request.type |= drm_waitvblank_pipe(output); ret = drmWaitVBlank(backend->drm.fd, &vbl); /* Error ret or zero timestamp means failure to get valid timestamp */ if ((ret == 0) && (vbl.reply.tval_sec > 0 || vbl.reply.tval_usec > 0)) { ts.tv_sec = vbl.reply.tval_sec; ts.tv_nsec = vbl.reply.tval_usec * 1000; /* Valid timestamp for most recent vblank - not stale? * Stale ts could happen on Linux 3.17+, so make sure it * is not older than 1 refresh duration since now. */ weston_compositor_read_presentation_clock(backend->compositor, &tnow); timespec_sub(&vbl2now, &tnow, &ts); refresh_nsec = millihz_to_nsec(output->base.current_mode->refresh); if (timespec_to_nsec(&vbl2now) < refresh_nsec) { drm_output_update_msc(output, vbl.reply.sequence); weston_output_finish_frame(output_base, &ts, WP_PRESENTATION_FEEDBACK_INVALID); return; } } /* Immediate query didn't provide valid timestamp. * Use pageflip fallback. */ fb_id = output->current->fb_id; if (drmModePageFlip(backend->drm.fd, output->crtc_id, fb_id, DRM_MODE_PAGE_FLIP_EVENT, output) < 0) { weston_log("queueing pageflip failed: %m\n"); goto finish_frame; } return; finish_frame: /* if we cannot page-flip, immediately finish frame */ weston_compositor_read_presentation_clock(output_base->compositor, &ts); weston_output_finish_frame(output_base, &ts, WP_PRESENTATION_FEEDBACK_INVALID); } static void drm_output_update_msc(struct drm_output *output, unsigned int seq) { uint64_t msc_hi = output->base.msc >> 32; if (seq < (output->base.msc & 0xffffffff)) msc_hi++; output->base.msc = (msc_hi << 32) + seq; } static void vblank_handler(int fd, unsigned int frame, unsigned int sec, unsigned int usec, void *data) { struct drm_sprite *s = (struct drm_sprite *)data; struct drm_output *output = s->output; struct timespec ts; uint32_t flags = WP_PRESENTATION_FEEDBACK_KIND_HW_COMPLETION | WP_PRESENTATION_FEEDBACK_KIND_HW_CLOCK; drm_output_update_msc(output, frame); output->vblank_pending = 0; drm_output_release_fb(output, s->current); s->current = s->next; s->next = NULL; if (!output->page_flip_pending) { ts.tv_sec = sec; ts.tv_nsec = usec * 1000; weston_output_finish_frame(&output->base, &ts, flags); } } static void drm_output_destroy(struct weston_output *output_base); static void page_flip_handler(int fd, unsigned int frame, unsigned int sec, unsigned int usec, void *data) { struct drm_output *output = (struct drm_output *) data; struct timespec ts; uint32_t flags = WP_PRESENTATION_FEEDBACK_KIND_VSYNC | WP_PRESENTATION_FEEDBACK_KIND_HW_COMPLETION | WP_PRESENTATION_FEEDBACK_KIND_HW_CLOCK; drm_output_update_msc(output, frame); /* We don't set page_flip_pending on start_repaint_loop, in that case * we just want to page flip to the current buffer to get an accurate * timestamp */ if (output->page_flip_pending) { drm_output_release_fb(output, output->current); output->current = output->next; output->next = NULL; } output->page_flip_pending = 0; if (output->destroy_pending) drm_output_destroy(&output->base); else if (!output->vblank_pending) { ts.tv_sec = sec; ts.tv_nsec = usec * 1000; weston_output_finish_frame(&output->base, &ts, flags); /* We can't call this from frame_notify, because the output's * repaint needed flag is cleared just after that */ if (output->recorder) weston_output_schedule_repaint(&output->base); } } static uint32_t drm_output_check_sprite_format(struct drm_sprite *s, struct weston_view *ev, struct gbm_bo *bo) { uint32_t i, format; format = gbm_bo_get_format(bo); if (format == GBM_FORMAT_ARGB8888) { pixman_region32_t r; pixman_region32_init_rect(&r, 0, 0, ev->surface->width, ev->surface->height); pixman_region32_subtract(&r, &r, &ev->surface->opaque); if (!pixman_region32_not_empty(&r)) format = GBM_FORMAT_XRGB8888; pixman_region32_fini(&r); } for (i = 0; i < s->count_formats; i++) if (s->formats[i] == format) return format; return 0; } static int drm_view_transform_supported(struct weston_view *ev) { return !ev->transform.enabled || (ev->transform.matrix.type < WESTON_MATRIX_TRANSFORM_ROTATE); } static struct weston_plane * drm_output_prepare_overlay_view(struct drm_output *output, struct weston_view *ev) { struct weston_compositor *ec = output->base.compositor; struct drm_backend *b = (struct drm_backend *)ec->backend; struct weston_buffer_viewport *viewport = &ev->surface->buffer_viewport; struct wl_resource *buffer_resource; struct drm_sprite *s; struct linux_dmabuf_buffer *dmabuf; int found = 0; struct gbm_bo *bo; pixman_region32_t dest_rect, src_rect; pixman_box32_t *box, tbox; uint32_t format; wl_fixed_t sx1, sy1, sx2, sy2; if (b->gbm == NULL) return NULL; if (viewport->buffer.transform != output->base.transform) return NULL; if (viewport->buffer.scale != output->base.current_scale) return NULL; if (b->sprites_are_broken) return NULL; if (ev->output_mask != (1u << output->base.id)) return NULL; if (ev->surface->buffer_ref.buffer == NULL) return NULL; buffer_resource = ev->surface->buffer_ref.buffer->resource; if (ev->alpha != 1.0f) return NULL; if (wl_shm_buffer_get(buffer_resource)) return NULL; if (!drm_view_transform_supported(ev)) return NULL; wl_list_for_each(s, &b->sprite_list, link) { if (!drm_sprite_crtc_supported(output, s->possible_crtcs)) continue; if (!s->next) { found = 1; break; } } /* No sprites available */ if (!found) return NULL; if ((dmabuf = linux_dmabuf_buffer_get(buffer_resource))) { #ifdef HAVE_GBM_FD_IMPORT /* XXX: TODO: * * Use AddFB2 directly, do not go via GBM. * Add support for multiplanar formats. * Both require refactoring in the DRM-backend to * support a mix of gbm_bos and drmfbs. */ struct gbm_import_fd_data gbm_dmabuf = { .fd = dmabuf->attributes.fd[0], .width = dmabuf->attributes.width, .height = dmabuf->attributes.height, .stride = dmabuf->attributes.stride[0], .format = dmabuf->attributes.format }; if (dmabuf->attributes.n_planes != 1 || dmabuf->attributes.offset[0] != 0) return NULL; bo = gbm_bo_import(b->gbm, GBM_BO_IMPORT_FD, &gbm_dmabuf, GBM_BO_USE_SCANOUT); #else return NULL; #endif } else { bo = gbm_bo_import(b->gbm, GBM_BO_IMPORT_WL_BUFFER, buffer_resource, GBM_BO_USE_SCANOUT); } if (!bo) return NULL; format = drm_output_check_sprite_format(s, ev, bo); if (format == 0) { gbm_bo_destroy(bo); return NULL; } s->next = drm_fb_get_from_bo(bo, b, format); if (!s->next) { gbm_bo_destroy(bo); return NULL; } drm_fb_set_buffer(s->next, ev->surface->buffer_ref.buffer); box = pixman_region32_extents(&ev->transform.boundingbox); s->plane.x = box->x1; s->plane.y = box->y1; /* * Calculate the source & dest rects properly based on actual * position (note the caller has called weston_view_update_transform() * for us already). */ pixman_region32_init(&dest_rect); pixman_region32_intersect(&dest_rect, &ev->transform.boundingbox, &output->base.region); pixman_region32_translate(&dest_rect, -output->base.x, -output->base.y); box = pixman_region32_extents(&dest_rect); tbox = weston_transformed_rect(output->base.width, output->base.height, output->base.transform, output->base.current_scale, *box); s->dest_x = tbox.x1; s->dest_y = tbox.y1; s->dest_w = tbox.x2 - tbox.x1; s->dest_h = tbox.y2 - tbox.y1; pixman_region32_fini(&dest_rect); pixman_region32_init(&src_rect); pixman_region32_intersect(&src_rect, &ev->transform.boundingbox, &output->base.region); box = pixman_region32_extents(&src_rect); weston_view_from_global_fixed(ev, wl_fixed_from_int(box->x1), wl_fixed_from_int(box->y1), &sx1, &sy1); weston_view_from_global_fixed(ev, wl_fixed_from_int(box->x2), wl_fixed_from_int(box->y2), &sx2, &sy2); if (sx1 < 0) sx1 = 0; if (sy1 < 0) sy1 = 0; if (sx2 > wl_fixed_from_int(ev->surface->width)) sx2 = wl_fixed_from_int(ev->surface->width); if (sy2 > wl_fixed_from_int(ev->surface->height)) sy2 = wl_fixed_from_int(ev->surface->height); tbox.x1 = sx1; tbox.y1 = sy1; tbox.x2 = sx2; tbox.y2 = sy2; tbox = weston_transformed_rect(wl_fixed_from_int(ev->surface->width), wl_fixed_from_int(ev->surface->height), viewport->buffer.transform, viewport->buffer.scale, tbox); s->src_x = tbox.x1 << 8; s->src_y = tbox.y1 << 8; s->src_w = (tbox.x2 - tbox.x1) << 8; s->src_h = (tbox.y2 - tbox.y1) << 8; pixman_region32_fini(&src_rect); return &s->plane; } static struct weston_plane * drm_output_prepare_cursor_view(struct drm_output *output, struct weston_view *ev) { struct drm_backend *b = (struct drm_backend *)output->base.compositor->backend; struct weston_buffer_viewport *viewport = &ev->surface->buffer_viewport; struct wl_shm_buffer *shmbuf; if (ev->transform.enabled && (ev->transform.matrix.type > WESTON_MATRIX_TRANSFORM_TRANSLATE)) return NULL; if (b->gbm == NULL) return NULL; if (output->base.transform != WL_OUTPUT_TRANSFORM_NORMAL) return NULL; if (viewport->buffer.scale != output->base.current_scale) return NULL; if (output->cursor_view) return NULL; if (ev->output_mask != (1u << output->base.id)) return NULL; if (b->cursors_are_broken) return NULL; if (ev->geometry.scissor_enabled) return NULL; if (ev->surface->buffer_ref.buffer == NULL) return NULL; shmbuf = wl_shm_buffer_get(ev->surface->buffer_ref.buffer->resource); if (!shmbuf) return NULL; if (wl_shm_buffer_get_format(shmbuf) != WL_SHM_FORMAT_ARGB8888) return NULL; if (ev->surface->width > b->cursor_width || ev->surface->height > b->cursor_height) return NULL; output->cursor_view = ev; return &output->cursor_plane; } /** * Update the image for the current cursor surface * * @param b DRM backend structure * @param bo GBM buffer object to write into * @param ev View to use for cursor image */ static void cursor_bo_update(struct drm_backend *b, struct gbm_bo *bo, struct weston_view *ev) { struct weston_buffer *buffer = ev->surface->buffer_ref.buffer; uint32_t buf[b->cursor_width * b->cursor_height]; int32_t stride; uint8_t *s; int i; assert(buffer && buffer->shm_buffer); assert(buffer->shm_buffer == wl_shm_buffer_get(buffer->resource)); assert(ev->surface->width <= b->cursor_width); assert(ev->surface->height <= b->cursor_height); memset(buf, 0, sizeof buf); stride = wl_shm_buffer_get_stride(buffer->shm_buffer); s = wl_shm_buffer_get_data(buffer->shm_buffer); wl_shm_buffer_begin_access(buffer->shm_buffer); for (i = 0; i < ev->surface->height; i++) memcpy(buf + i * b->cursor_width, s + i * stride, ev->surface->width * 4); wl_shm_buffer_end_access(buffer->shm_buffer); if (gbm_bo_write(bo, buf, sizeof buf) < 0) weston_log("failed update cursor: %m\n"); } static void drm_output_set_cursor(struct drm_output *output) { struct weston_view *ev = output->cursor_view; struct weston_buffer *buffer; struct drm_backend *b = (struct drm_backend *) output->base.compositor->backend; EGLint handle; struct gbm_bo *bo; float x, y; output->cursor_view = NULL; if (ev == NULL) { drmModeSetCursor(b->drm.fd, output->crtc_id, 0, 0, 0); output->cursor_plane.x = INT32_MIN; output->cursor_plane.y = INT32_MIN; return; } buffer = ev->surface->buffer_ref.buffer; if (buffer && pixman_region32_not_empty(&output->cursor_plane.damage)) { pixman_region32_fini(&output->cursor_plane.damage); pixman_region32_init(&output->cursor_plane.damage); output->current_cursor ^= 1; bo = output->gbm_cursor_bo[output->current_cursor]; cursor_bo_update(b, bo, ev); handle = gbm_bo_get_handle(bo).s32; if (drmModeSetCursor(b->drm.fd, output->crtc_id, handle, b->cursor_width, b->cursor_height)) { weston_log("failed to set cursor: %m\n"); b->cursors_are_broken = 1; } } weston_view_to_global_float(ev, 0, 0, &x, &y); /* From global to output space, output transform is guaranteed to be * NORMAL by drm_output_prepare_cursor_view(). */ x = (x - output->base.x) * output->base.current_scale; y = (y - output->base.y) * output->base.current_scale; if (output->cursor_plane.x != x || output->cursor_plane.y != y) { if (drmModeMoveCursor(b->drm.fd, output->crtc_id, x, y)) { weston_log("failed to move cursor: %m\n"); b->cursors_are_broken = 1; } output->cursor_plane.x = x; output->cursor_plane.y = y; } } static void drm_assign_planes(struct weston_output *output_base) { struct drm_backend *b = (struct drm_backend *)output_base->compositor->backend; struct drm_output *output = (struct drm_output *)output_base; struct weston_view *ev, *next; pixman_region32_t overlap, surface_overlap; struct weston_plane *primary, *next_plane; /* * Find a surface for each sprite in the output using some heuristics: * 1) size * 2) frequency of update * 3) opacity (though some hw might support alpha blending) * 4) clipping (this can be fixed with color keys) * * The idea is to save on blitting since this should save power. * If we can get a large video surface on the sprite for example, * the main display surface may not need to update at all, and * the client buffer can be used directly for the sprite surface * as we do for flipping full screen surfaces. */ pixman_region32_init(&overlap); primary = &output_base->compositor->primary_plane; wl_list_for_each_safe(ev, next, &output_base->compositor->view_list, link) { struct weston_surface *es = ev->surface; /* Test whether this buffer can ever go into a plane: * non-shm, or small enough to be a cursor. * * Also, keep a reference when using the pixman renderer. * That makes it possible to do a seamless switch to the GL * renderer and since the pixman renderer keeps a reference * to the buffer anyway, there is no side effects. */ if (b->use_pixman || (es->buffer_ref.buffer && (!wl_shm_buffer_get(es->buffer_ref.buffer->resource) || (ev->surface->width <= b->cursor_width && ev->surface->height <= b->cursor_height)))) es->keep_buffer = true; else es->keep_buffer = false; pixman_region32_init(&surface_overlap); pixman_region32_intersect(&surface_overlap, &overlap, &ev->transform.boundingbox); next_plane = NULL; if (pixman_region32_not_empty(&surface_overlap)) next_plane = primary; if (next_plane == NULL) next_plane = drm_output_prepare_cursor_view(output, ev); if (next_plane == NULL) next_plane = drm_output_prepare_scanout_view(output, ev); if (next_plane == NULL) next_plane = drm_output_prepare_overlay_view(output, ev); if (next_plane == NULL) next_plane = primary; weston_view_move_to_plane(ev, next_plane); if (next_plane == primary) pixman_region32_union(&overlap, &overlap, &ev->transform.boundingbox); if (next_plane == primary || next_plane == &output->cursor_plane) { /* cursor plane involves a copy */ ev->psf_flags = 0; } else { /* All other planes are a direct scanout of a * single client buffer. */ ev->psf_flags = WP_PRESENTATION_FEEDBACK_KIND_ZERO_COPY; } pixman_region32_fini(&surface_overlap); } pixman_region32_fini(&overlap); } static void drm_output_fini_pixman(struct drm_output *output); static void drm_output_destroy(struct weston_output *output_base) { struct drm_output *output = (struct drm_output *) output_base; struct drm_backend *b = (struct drm_backend *)output->base.compositor->backend; drmModeCrtcPtr origcrtc = output->original_crtc; if (output->page_flip_pending) { output->destroy_pending = 1; weston_log("destroy output while page flip pending\n"); return; } if (output->backlight) backlight_destroy(output->backlight); drmModeFreeProperty(output->dpms_prop); /* Turn off hardware cursor */ drmModeSetCursor(b->drm.fd, output->crtc_id, 0, 0, 0); /* Restore original CRTC state */ drmModeSetCrtc(b->drm.fd, origcrtc->crtc_id, origcrtc->buffer_id, origcrtc->x, origcrtc->y, &output->connector_id, 1, &origcrtc->mode); drmModeFreeCrtc(origcrtc); b->crtc_allocator &= ~(1 << output->crtc_id); b->connector_allocator &= ~(1 << output->connector_id); if (b->use_pixman) { drm_output_fini_pixman(output); } else { gl_renderer->output_destroy(output_base); gbm_surface_destroy(output->gbm_surface); } weston_plane_release(&output->fb_plane); weston_plane_release(&output->cursor_plane); weston_output_destroy(&output->base); free(output); } /** * Find the closest-matching mode for a given target * * Given a target mode, find the most suitable mode amongst the output's * current mode list to use, preferring the current mode if possible, to * avoid an expensive mode switch. * * @param output DRM output * @param target_mode Mode to attempt to match * @returns Pointer to a mode from the output's mode list */ static struct drm_mode * choose_mode (struct drm_output *output, struct weston_mode *target_mode) { struct drm_mode *tmp_mode = NULL, *mode; if (output->base.current_mode->width == target_mode->width && output->base.current_mode->height == target_mode->height && (output->base.current_mode->refresh == target_mode->refresh || target_mode->refresh == 0)) return (struct drm_mode *)output->base.current_mode; wl_list_for_each(mode, &output->base.mode_list, base.link) { if (mode->mode_info.hdisplay == target_mode->width && mode->mode_info.vdisplay == target_mode->height) { if (mode->base.refresh == target_mode->refresh || target_mode->refresh == 0) { return mode; } else if (!tmp_mode) tmp_mode = mode; } } return tmp_mode; } static int drm_output_init_egl(struct drm_output *output, struct drm_backend *b); static int drm_output_init_pixman(struct drm_output *output, struct drm_backend *b); static int drm_output_switch_mode(struct weston_output *output_base, struct weston_mode *mode) { struct drm_output *output; struct drm_mode *drm_mode; struct drm_backend *b; if (output_base == NULL) { weston_log("output is NULL.\n"); return -1; } if (mode == NULL) { weston_log("mode is NULL.\n"); return -1; } b = (struct drm_backend *)output_base->compositor->backend; output = (struct drm_output *)output_base; drm_mode = choose_mode (output, mode); if (!drm_mode) { weston_log("%s, invalid resolution:%dx%d\n", __func__, mode->width, mode->height); return -1; } if (&drm_mode->base == output->base.current_mode) return 0; output->base.current_mode->flags = 0; output->base.current_mode = &drm_mode->base; output->base.current_mode->flags = WL_OUTPUT_MODE_CURRENT | WL_OUTPUT_MODE_PREFERRED; /* reset rendering stuff. */ drm_output_release_fb(output, output->current); drm_output_release_fb(output, output->next); output->current = output->next = NULL; if (b->use_pixman) { drm_output_fini_pixman(output); if (drm_output_init_pixman(output, b) < 0) { weston_log("failed to init output pixman state with " "new mode\n"); return -1; } } else { gl_renderer->output_destroy(&output->base); gbm_surface_destroy(output->gbm_surface); if (drm_output_init_egl(output, b) < 0) { weston_log("failed to init output egl state with " "new mode"); return -1; } } return 0; } static int on_drm_input(int fd, uint32_t mask, void *data) { drmEventContext evctx; memset(&evctx, 0, sizeof evctx); evctx.version = DRM_EVENT_CONTEXT_VERSION; evctx.page_flip_handler = page_flip_handler; evctx.vblank_handler = vblank_handler; drmHandleEvent(fd, &evctx); return 1; } static int init_drm(struct drm_backend *b, struct udev_device *device) { const char *filename, *sysnum; uint64_t cap; int fd, ret; clockid_t clk_id; sysnum = udev_device_get_sysnum(device); if (sysnum) b->drm.id = atoi(sysnum); if (!sysnum || b->drm.id < 0) { weston_log("cannot get device sysnum\n"); return -1; } filename = udev_device_get_devnode(device); fd = weston_launcher_open(b->compositor->launcher, filename, O_RDWR); if (fd < 0) { /* Probably permissions error */ weston_log("couldn't open %s, skipping\n", udev_device_get_devnode(device)); return -1; } weston_log("using %s\n", filename); b->drm.fd = fd; b->drm.filename = strdup(filename); ret = drmGetCap(fd, DRM_CAP_TIMESTAMP_MONOTONIC, &cap); if (ret == 0 && cap == 1) clk_id = CLOCK_MONOTONIC; else clk_id = CLOCK_REALTIME; if (weston_compositor_set_presentation_clock(b->compositor, clk_id) < 0) { weston_log("Error: failed to set presentation clock %d.\n", clk_id); return -1; } ret = drmGetCap(fd, DRM_CAP_CURSOR_WIDTH, &cap); if (ret == 0) b->cursor_width = cap; else b->cursor_width = 64; ret = drmGetCap(fd, DRM_CAP_CURSOR_HEIGHT, &cap); if (ret == 0) b->cursor_height = cap; else b->cursor_height = 64; return 0; } static struct gbm_device * create_gbm_device(int fd) { struct gbm_device *gbm; gl_renderer = weston_load_module("gl-renderer.so", "gl_renderer_interface"); if (!gl_renderer) return NULL; /* GBM will load a dri driver, but even though they need symbols from * libglapi, in some version of Mesa they are not linked to it. Since * only the gl-renderer module links to it, the call above won't make * these symbols globally available, and loading the DRI driver fails. * Workaround this by dlopen()'ing libglapi with RTLD_GLOBAL. */ dlopen("libglapi.so.0", RTLD_LAZY | RTLD_GLOBAL); gbm = gbm_create_device(fd); return gbm; } /* When initializing EGL, if the preferred buffer format isn't available * we may be able to substitute an ARGB format for an XRGB one. * * This returns 0 if substitution isn't possible, but 0 might be a * legitimate format for other EGL platforms, so the caller is * responsible for checking for 0 before calling gl_renderer->create(). * * This works around https://bugs.freedesktop.org/show_bug.cgi?id=89689 * but it's entirely possible we'll see this again on other implementations. */ static int fallback_format_for(uint32_t format) { switch (format) { case GBM_FORMAT_XRGB8888: return GBM_FORMAT_ARGB8888; case GBM_FORMAT_XRGB2101010: return GBM_FORMAT_ARGB2101010; default: return 0; } } static int drm_backend_create_gl_renderer(struct drm_backend *b) { EGLint format[3] = { b->gbm_format, fallback_format_for(b->gbm_format), 0, }; int n_formats = 2; if (format[1]) n_formats = 3; if (gl_renderer->create(b->compositor, EGL_PLATFORM_GBM_KHR, (void *)b->gbm, gl_renderer->opaque_attribs, format, n_formats) < 0) { return -1; } return 0; } static int init_egl(struct drm_backend *b) { b->gbm = create_gbm_device(b->drm.fd); if (!b->gbm) return -1; if (drm_backend_create_gl_renderer(b) < 0) { gbm_device_destroy(b->gbm); return -1; } return 0; } static int init_pixman(struct drm_backend *b) { return pixman_renderer_init(b->compositor); } /** * Add a mode to output's mode list * * Copy the supplied DRM mode into a Weston mode structure, and add it to the * output's mode list. * * @param output DRM output to add mode to * @param info DRM mode structure to add * @returns Newly-allocated Weston/DRM mode structure */ static struct drm_mode * drm_output_add_mode(struct drm_output *output, const drmModeModeInfo *info) { struct drm_mode *mode; uint64_t refresh; mode = malloc(sizeof *mode); if (mode == NULL) return NULL; mode->base.flags = 0; mode->base.width = info->hdisplay; mode->base.height = info->vdisplay; /* Calculate higher precision (mHz) refresh rate */ refresh = (info->clock * 1000000LL / info->htotal + info->vtotal / 2) / info->vtotal; if (info->flags & DRM_MODE_FLAG_INTERLACE) refresh *= 2; if (info->flags & DRM_MODE_FLAG_DBLSCAN) refresh /= 2; if (info->vscan > 1) refresh /= info->vscan; mode->base.refresh = refresh; mode->mode_info = *info; if (info->type & DRM_MODE_TYPE_PREFERRED) mode->base.flags |= WL_OUTPUT_MODE_PREFERRED; wl_list_insert(output->base.mode_list.prev, &mode->base.link); return mode; } static int drm_subpixel_to_wayland(int drm_value) { switch (drm_value) { default: case DRM_MODE_SUBPIXEL_UNKNOWN: return WL_OUTPUT_SUBPIXEL_UNKNOWN; case DRM_MODE_SUBPIXEL_NONE: return WL_OUTPUT_SUBPIXEL_NONE; case DRM_MODE_SUBPIXEL_HORIZONTAL_RGB: return WL_OUTPUT_SUBPIXEL_HORIZONTAL_RGB; case DRM_MODE_SUBPIXEL_HORIZONTAL_BGR: return WL_OUTPUT_SUBPIXEL_HORIZONTAL_BGR; case DRM_MODE_SUBPIXEL_VERTICAL_RGB: return WL_OUTPUT_SUBPIXEL_VERTICAL_RGB; case DRM_MODE_SUBPIXEL_VERTICAL_BGR: return WL_OUTPUT_SUBPIXEL_VERTICAL_BGR; } } /* returns a value between 0-255 range, where higher is brighter */ static uint32_t drm_get_backlight(struct drm_output *output) { long brightness, max_brightness, norm; brightness = backlight_get_brightness(output->backlight); max_brightness = backlight_get_max_brightness(output->backlight); /* convert it on a scale of 0 to 255 */ norm = (brightness * 255)/(max_brightness); return (uint32_t) norm; } /* values accepted are between 0-255 range */ static void drm_set_backlight(struct weston_output *output_base, uint32_t value) { struct drm_output *output = (struct drm_output *) output_base; long max_brightness, new_brightness; if (!output->backlight) return; if (value > 255) return; max_brightness = backlight_get_max_brightness(output->backlight); /* get denormalized value */ new_brightness = (value * max_brightness) / 255; backlight_set_brightness(output->backlight, new_brightness); } static drmModePropertyPtr drm_get_prop(int fd, drmModeConnectorPtr connector, const char *name) { drmModePropertyPtr props; int i; for (i = 0; i < connector->count_props; i++) { props = drmModeGetProperty(fd, connector->props[i]); if (!props) continue; if (!strcmp(props->name, name)) return props; drmModeFreeProperty(props); } return NULL; } static void drm_set_dpms(struct weston_output *output_base, enum dpms_enum level) { struct drm_output *output = (struct drm_output *) output_base; struct weston_compositor *ec = output_base->compositor; struct drm_backend *b = (struct drm_backend *)ec->backend; int ret; if (!output->dpms_prop) return; ret = drmModeConnectorSetProperty(b->drm.fd, output->connector_id, output->dpms_prop->prop_id, level); if (ret) { weston_log("DRM: DPMS: failed property set for %s\n", output->base.name); return; } output->dpms = level; } static const char * const connector_type_names[] = { [DRM_MODE_CONNECTOR_Unknown] = "Unknown", [DRM_MODE_CONNECTOR_VGA] = "VGA", [DRM_MODE_CONNECTOR_DVII] = "DVI-I", [DRM_MODE_CONNECTOR_DVID] = "DVI-D", [DRM_MODE_CONNECTOR_DVIA] = "DVI-A", [DRM_MODE_CONNECTOR_Composite] = "Composite", [DRM_MODE_CONNECTOR_SVIDEO] = "SVIDEO", [DRM_MODE_CONNECTOR_LVDS] = "LVDS", [DRM_MODE_CONNECTOR_Component] = "Component", [DRM_MODE_CONNECTOR_9PinDIN] = "DIN", [DRM_MODE_CONNECTOR_DisplayPort] = "DP", [DRM_MODE_CONNECTOR_HDMIA] = "HDMI-A", [DRM_MODE_CONNECTOR_HDMIB] = "HDMI-B", [DRM_MODE_CONNECTOR_TV] = "TV", [DRM_MODE_CONNECTOR_eDP] = "eDP", #ifdef DRM_MODE_CONNECTOR_DSI [DRM_MODE_CONNECTOR_VIRTUAL] = "Virtual", [DRM_MODE_CONNECTOR_DSI] = "DSI", #endif }; static char * make_connector_name(const drmModeConnector *con) { char name[32]; const char *type_name = NULL; if (con->connector_type < ARRAY_LENGTH(connector_type_names)) type_name = connector_type_names[con->connector_type]; if (!type_name) type_name = "UNNAMED"; snprintf(name, sizeof name, "%s-%d", type_name, con->connector_type_id); return strdup(name); } static int find_crtc_for_connector(struct drm_backend *b, drmModeRes *resources, drmModeConnector *connector) { drmModeEncoder *encoder; uint32_t possible_crtcs; int i, j; for (j = 0; j < connector->count_encoders; j++) { encoder = drmModeGetEncoder(b->drm.fd, connector->encoders[j]); if (encoder == NULL) { weston_log("Failed to get encoder.\n"); return -1; } possible_crtcs = encoder->possible_crtcs; drmModeFreeEncoder(encoder); for (i = 0; i < resources->count_crtcs; i++) { if (possible_crtcs & (1 << i) && !(b->crtc_allocator & (1 << resources->crtcs[i]))) return i; } } return -1; } /* Init output state that depends on gl or gbm */ static int drm_output_init_egl(struct drm_output *output, struct drm_backend *b) { EGLint format[2] = { output->gbm_format, fallback_format_for(output->gbm_format), }; int i, flags, n_formats = 1; output->gbm_surface = gbm_surface_create(b->gbm, output->base.current_mode->width, output->base.current_mode->height, format[0], GBM_BO_USE_SCANOUT | GBM_BO_USE_RENDERING); if (!output->gbm_surface) { weston_log("failed to create gbm surface\n"); return -1; } if (format[1]) n_formats = 2; if (gl_renderer->output_create(&output->base, (EGLNativeWindowType)output->gbm_surface, output->gbm_surface, gl_renderer->opaque_attribs, format, n_formats) < 0) { weston_log("failed to create gl renderer output state\n"); gbm_surface_destroy(output->gbm_surface); return -1; } flags = GBM_BO_USE_CURSOR | GBM_BO_USE_WRITE; for (i = 0; i < 2; i++) { if (output->gbm_cursor_bo[i]) continue; output->gbm_cursor_bo[i] = gbm_bo_create(b->gbm, b->cursor_width, b->cursor_height, GBM_FORMAT_ARGB8888, flags); } if (output->gbm_cursor_bo[0] == NULL || output->gbm_cursor_bo[1] == NULL) { weston_log("cursor buffers unavailable, using gl cursors\n"); b->cursors_are_broken = 1; } return 0; } static int drm_output_init_pixman(struct drm_output *output, struct drm_backend *b) { int w = output->base.current_mode->width; int h = output->base.current_mode->height; uint32_t format = output->gbm_format; uint32_t pixman_format; unsigned int i; switch (format) { case GBM_FORMAT_XRGB8888: pixman_format = PIXMAN_x8r8g8b8; break; case GBM_FORMAT_RGB565: pixman_format = PIXMAN_r5g6b5; break; default: weston_log("Unsupported pixman format 0x%x\n", format); return -1; } /* FIXME error checking */ for (i = 0; i < ARRAY_LENGTH(output->dumb); i++) { output->dumb[i] = drm_fb_create_dumb(b, w, h, format); if (!output->dumb[i]) goto err; output->image[i] = pixman_image_create_bits(pixman_format, w, h, output->dumb[i]->map, output->dumb[i]->stride); if (!output->image[i]) goto err; } if (pixman_renderer_output_create(&output->base) < 0) goto err; pixman_region32_init_rect(&output->previous_damage, output->base.x, output->base.y, output->base.width, output->base.height); return 0; err: for (i = 0; i < ARRAY_LENGTH(output->dumb); i++) { if (output->dumb[i]) drm_fb_destroy_dumb(output->dumb[i]); if (output->image[i]) pixman_image_unref(output->image[i]); output->dumb[i] = NULL; output->image[i] = NULL; } return -1; } static void drm_output_fini_pixman(struct drm_output *output) { unsigned int i; pixman_renderer_output_destroy(&output->base); pixman_region32_fini(&output->previous_damage); for (i = 0; i < ARRAY_LENGTH(output->dumb); i++) { drm_fb_destroy_dumb(output->dumb[i]); pixman_image_unref(output->image[i]); output->dumb[i] = NULL; output->image[i] = NULL; } } static void edid_parse_string(const uint8_t *data, char text[]) { int i; int replaced = 0; /* this is always 12 bytes, but we can't guarantee it's null * terminated or not junk. */ strncpy(text, (const char *) data, 12); /* guarantee our new string is null-terminated */ text[12] = '\0'; /* remove insane chars */ for (i = 0; text[i] != '\0'; i++) { if (text[i] == '\n' || text[i] == '\r') { text[i] = '\0'; break; } } /* ensure string is printable */ for (i = 0; text[i] != '\0'; i++) { if (!isprint(text[i])) { text[i] = '-'; replaced++; } } /* if the string is random junk, ignore the string */ if (replaced > 4) text[0] = '\0'; } #define EDID_DESCRIPTOR_ALPHANUMERIC_DATA_STRING 0xfe #define EDID_DESCRIPTOR_DISPLAY_PRODUCT_NAME 0xfc #define EDID_DESCRIPTOR_DISPLAY_PRODUCT_SERIAL_NUMBER 0xff #define EDID_OFFSET_DATA_BLOCKS 0x36 #define EDID_OFFSET_LAST_BLOCK 0x6c #define EDID_OFFSET_PNPID 0x08 #define EDID_OFFSET_SERIAL 0x0c static int edid_parse(struct drm_edid *edid, const uint8_t *data, size_t length) { int i; uint32_t serial_number; /* check header */ if (length < 128) return -1; if (data[0] != 0x00 || data[1] != 0xff) return -1; /* decode the PNP ID from three 5 bit words packed into 2 bytes * /--08--\/--09--\ * 7654321076543210 * |\---/\---/\---/ * R C1 C2 C3 */ edid->pnp_id[0] = 'A' + ((data[EDID_OFFSET_PNPID + 0] & 0x7c) / 4) - 1; edid->pnp_id[1] = 'A' + ((data[EDID_OFFSET_PNPID + 0] & 0x3) * 8) + ((data[EDID_OFFSET_PNPID + 1] & 0xe0) / 32) - 1; edid->pnp_id[2] = 'A' + (data[EDID_OFFSET_PNPID + 1] & 0x1f) - 1; edid->pnp_id[3] = '\0'; /* maybe there isn't a ASCII serial number descriptor, so use this instead */ serial_number = (uint32_t) data[EDID_OFFSET_SERIAL + 0]; serial_number += (uint32_t) data[EDID_OFFSET_SERIAL + 1] * 0x100; serial_number += (uint32_t) data[EDID_OFFSET_SERIAL + 2] * 0x10000; serial_number += (uint32_t) data[EDID_OFFSET_SERIAL + 3] * 0x1000000; if (serial_number > 0) sprintf(edid->serial_number, "%lu", (unsigned long) serial_number); /* parse EDID data */ for (i = EDID_OFFSET_DATA_BLOCKS; i <= EDID_OFFSET_LAST_BLOCK; i += 18) { /* ignore pixel clock data */ if (data[i] != 0) continue; if (data[i+2] != 0) continue; /* any useful blocks? */ if (data[i+3] == EDID_DESCRIPTOR_DISPLAY_PRODUCT_NAME) { edid_parse_string(&data[i+5], edid->monitor_name); } else if (data[i+3] == EDID_DESCRIPTOR_DISPLAY_PRODUCT_SERIAL_NUMBER) { edid_parse_string(&data[i+5], edid->serial_number); } else if (data[i+3] == EDID_DESCRIPTOR_ALPHANUMERIC_DATA_STRING) { edid_parse_string(&data[i+5], edid->eisa_id); } } return 0; } static void find_and_parse_output_edid(struct drm_backend *b, struct drm_output *output, drmModeConnector *connector) { drmModePropertyBlobPtr edid_blob = NULL; drmModePropertyPtr property; int i; int rc; for (i = 0; i < connector->count_props && !edid_blob; i++) { property = drmModeGetProperty(b->drm.fd, connector->props[i]); if (!property) continue; if ((property->flags & DRM_MODE_PROP_BLOB) && !strcmp(property->name, "EDID")) { edid_blob = drmModeGetPropertyBlob(b->drm.fd, connector->prop_values[i]); } drmModeFreeProperty(property); } if (!edid_blob) return; rc = edid_parse(&output->edid, edid_blob->data, edid_blob->length); if (!rc) { weston_log("EDID data '%s', '%s', '%s'\n", output->edid.pnp_id, output->edid.monitor_name, output->edid.serial_number); if (output->edid.pnp_id[0] != '\0') output->base.make = output->edid.pnp_id; if (output->edid.monitor_name[0] != '\0') output->base.model = output->edid.monitor_name; if (output->edid.serial_number[0] != '\0') output->base.serial_number = output->edid.serial_number; } drmModeFreePropertyBlob(edid_blob); } static int parse_modeline(const char *s, drmModeModeInfo *mode) { char hsync[16]; char vsync[16]; float fclock; mode->type = DRM_MODE_TYPE_USERDEF; mode->hskew = 0; mode->vscan = 0; mode->vrefresh = 0; mode->flags = 0; if (sscanf(s, "%f %hd %hd %hd %hd %hd %hd %hd %hd %15s %15s", &fclock, &mode->hdisplay, &mode->hsync_start, &mode->hsync_end, &mode->htotal, &mode->vdisplay, &mode->vsync_start, &mode->vsync_end, &mode->vtotal, hsync, vsync) != 11) return -1; mode->clock = fclock * 1000; if (strcmp(hsync, "+hsync") == 0) mode->flags |= DRM_MODE_FLAG_PHSYNC; else if (strcmp(hsync, "-hsync") == 0) mode->flags |= DRM_MODE_FLAG_NHSYNC; else return -1; if (strcmp(vsync, "+vsync") == 0) mode->flags |= DRM_MODE_FLAG_PVSYNC; else if (strcmp(vsync, "-vsync") == 0) mode->flags |= DRM_MODE_FLAG_NVSYNC; else return -1; snprintf(mode->name, sizeof mode->name, "%dx%d@%.3f", mode->hdisplay, mode->vdisplay, fclock); return 0; } static void setup_output_seat_constraint(struct drm_backend *b, struct weston_output *output, const char *s) { if (strcmp(s, "") != 0) { struct weston_pointer *pointer; struct udev_seat *seat; seat = udev_seat_get_named(&b->input, s); if (!seat) return; seat->base.output = output; pointer = weston_seat_get_pointer(&seat->base); if (pointer) weston_pointer_clamp(pointer, &pointer->x, &pointer->y); } } static int parse_gbm_format(const char *s, uint32_t default_value, uint32_t *gbm_format) { int ret = 0; if (s == NULL) *gbm_format = default_value; else if (strcmp(s, "xrgb8888") == 0) *gbm_format = GBM_FORMAT_XRGB8888; else if (strcmp(s, "rgb565") == 0) *gbm_format = GBM_FORMAT_RGB565; else if (strcmp(s, "xrgb2101010") == 0) *gbm_format = GBM_FORMAT_XRGB2101010; else { weston_log("fatal: unrecognized pixel format: %s\n", s); ret = -1; } return ret; } /** * Choose suitable mode for an output * * Find the most suitable mode to use for initial setup (or reconfiguration on * hotplug etc) for a DRM output. * * @param output DRM output to choose mode for * @param kind Strategy and preference to use when choosing mode * @param width Desired width for this output * @param height Desired height for this output * @param current_mode Mode currently being displayed on this output * @param modeline Manually-entered mode (may be NULL) * @returns A mode from the output's mode list, or NULL if none available */ static struct drm_mode * drm_output_choose_initial_mode(struct drm_backend *backend, struct drm_output *output, enum weston_drm_backend_output_mode mode, struct weston_drm_backend_output_config *config, const drmModeModeInfo *current_mode) { struct drm_mode *preferred = NULL; struct drm_mode *current = NULL; struct drm_mode *configured = NULL; struct drm_mode *best = NULL; struct drm_mode *drm_mode; drmModeModeInfo modeline; int32_t width = 0; int32_t height = 0; if (mode == WESTON_DRM_BACKEND_OUTPUT_PREFERRED && config->modeline) { if (sscanf(config->modeline, "%dx%d", &width, &height) != 2) { width = -1; if (parse_modeline(config->modeline, &modeline) == 0) { configured = drm_output_add_mode(output, &modeline); if (!configured) return NULL; } else { weston_log("Invalid modeline \"%s\" for output %s\n", config->modeline, output->base.name); } } } wl_list_for_each_reverse(drm_mode, &output->base.mode_list, base.link) { if (width == drm_mode->base.width && height == drm_mode->base.height) configured = drm_mode; if (memcmp(current_mode, &drm_mode->mode_info, sizeof *current_mode) == 0) current = drm_mode; if (drm_mode->base.flags & WL_OUTPUT_MODE_PREFERRED) preferred = drm_mode; best = drm_mode; } if (current == NULL && current_mode->clock != 0) { current = drm_output_add_mode(output, current_mode); if (!current) return NULL; } if (mode == WESTON_DRM_BACKEND_OUTPUT_CURRENT) configured = current; if (configured) return configured; if (preferred) return preferred; if (current) return current; if (best) return best; weston_log("no available modes for %s\n", output->base.name); return NULL; } static int connector_get_current_mode(drmModeConnector *connector, int drm_fd, drmModeModeInfo *mode) { drmModeEncoder *encoder; drmModeCrtc *crtc; /* Get the current mode on the crtc that's currently driving * this connector. */ encoder = drmModeGetEncoder(drm_fd, connector->encoder_id); memset(mode, 0, sizeof *mode); if (encoder != NULL) { crtc = drmModeGetCrtc(drm_fd, encoder->crtc_id); drmModeFreeEncoder(encoder); if (crtc == NULL) return -1; if (crtc->mode_valid) *mode = crtc->mode; drmModeFreeCrtc(crtc); } return 0; } /** * Create and configure a Weston output structure * * Given a DRM connector, create a matching drm_output structure and add it * to Weston's output list. * * @param b Weston backend structure structure * @param resources DRM resources for this device * @param connector DRM connector to use for this new output * @param x Horizontal offset to use into global co-ordinate space * @param y Vertical offset to use into global co-ordinate space * @param drm_device udev device pointer * @returns 0 on success, or -1 on failure */ static int create_output_for_connector(struct drm_backend *b, drmModeRes *resources, drmModeConnector *connector, int x, int y, struct udev_device *drm_device) { struct drm_output *output; struct drm_mode *drm_mode, *next, *current; struct weston_mode *m; drmModeModeInfo crtc_mode; int i; enum weston_drm_backend_output_mode mode; struct weston_drm_backend_output_config config = {{ 0 }}; i = find_crtc_for_connector(b, resources, connector); if (i < 0) { weston_log("No usable crtc/encoder pair for connector.\n"); return -1; } output = zalloc(sizeof *output); if (output == NULL) return -1; output->base.subpixel = drm_subpixel_to_wayland(connector->subpixel); output->base.name = make_connector_name(connector); output->base.make = "unknown"; output->base.model = "unknown"; output->base.serial_number = "unknown"; wl_list_init(&output->base.mode_list); mode = b->configure_output(b->compositor, b->use_current_mode, output->base.name, &config); if (parse_gbm_format(config.gbm_format, b->gbm_format, &output->gbm_format) == -1) output->gbm_format = b->gbm_format; setup_output_seat_constraint(b, &output->base, config.seat ? config.seat : ""); free(config.seat); output->crtc_id = resources->crtcs[i]; output->pipe = i; b->crtc_allocator |= (1 << output->crtc_id); output->connector_id = connector->connector_id; b->connector_allocator |= (1 << output->connector_id); output->original_crtc = drmModeGetCrtc(b->drm.fd, output->crtc_id); output->dpms_prop = drm_get_prop(b->drm.fd, connector, "DPMS"); if (connector_get_current_mode(connector, b->drm.fd, &crtc_mode) < 0) goto err_free; for (i = 0; i < connector->count_modes; i++) { drm_mode = drm_output_add_mode(output, &connector->modes[i]); if (!drm_mode) goto err_free; } if (mode == WESTON_DRM_BACKEND_OUTPUT_OFF) { weston_log("Disabling output %s\n", output->base.name); drmModeSetCrtc(b->drm.fd, output->crtc_id, 0, 0, 0, 0, 0, NULL); goto err_free; } current = drm_output_choose_initial_mode(b, output, mode, &config, &crtc_mode); if (!current) goto err_free; output->base.current_mode = ¤t->base; output->base.current_mode->flags |= WL_OUTPUT_MODE_CURRENT; weston_output_init(&output->base, b->compositor, x, y, connector->mmWidth, connector->mmHeight, config.base.transform, config.base.scale); if (b->use_pixman) { if (drm_output_init_pixman(output, b) < 0) { weston_log("Failed to init output pixman state\n"); goto err_output; } } else if (drm_output_init_egl(output, b) < 0) { weston_log("Failed to init output gl state\n"); goto err_output; } output->backlight = backlight_init(drm_device, connector->connector_type); if (output->backlight) { weston_log("Initialized backlight, device %s\n", output->backlight->path); output->base.set_backlight = drm_set_backlight; output->base.backlight_current = drm_get_backlight(output); } else { weston_log("Failed to initialize backlight\n"); } weston_compositor_add_output(b->compositor, &output->base); find_and_parse_output_edid(b, output, connector); if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS) output->base.connection_internal = 1; output->base.start_repaint_loop = drm_output_start_repaint_loop; output->base.repaint = drm_output_repaint; output->base.destroy = drm_output_destroy; output->base.assign_planes = drm_assign_planes; output->base.set_dpms = drm_set_dpms; output->base.switch_mode = drm_output_switch_mode; output->base.gamma_size = output->original_crtc->gamma_size; output->base.set_gamma = drm_output_set_gamma; weston_plane_init(&output->cursor_plane, b->compositor, INT32_MIN, INT32_MIN); weston_plane_init(&output->fb_plane, b->compositor, 0, 0); weston_compositor_stack_plane(b->compositor, &output->cursor_plane, NULL); weston_compositor_stack_plane(b->compositor, &output->fb_plane, &b->compositor->primary_plane); weston_log("Output %s, (connector %d, crtc %d)\n", output->base.name, output->connector_id, output->crtc_id); wl_list_for_each(m, &output->base.mode_list, link) weston_log_continue(STAMP_SPACE "mode %dx%d@%.1f%s%s%s\n", m->width, m->height, m->refresh / 1000.0, m->flags & WL_OUTPUT_MODE_PREFERRED ? ", preferred" : "", m->flags & WL_OUTPUT_MODE_CURRENT ? ", current" : "", connector->count_modes == 0 ? ", built-in" : ""); /* Set native_ fields, so weston_output_mode_switch_to_native() works */ output->base.native_mode = output->base.current_mode; output->base.native_scale = output->base.current_scale; return 0; err_output: weston_output_destroy(&output->base); err_free: wl_list_for_each_safe(drm_mode, next, &output->base.mode_list, base.link) { wl_list_remove(&drm_mode->base.link); free(drm_mode); } drmModeFreeCrtc(output->original_crtc); b->crtc_allocator &= ~(1 << output->crtc_id); b->connector_allocator &= ~(1 << output->connector_id); free(output); free(config.modeline); return -1; } static void create_sprites(struct drm_backend *b) { struct drm_sprite *sprite; drmModePlaneRes *plane_res; drmModePlane *plane; uint32_t i; plane_res = drmModeGetPlaneResources(b->drm.fd); if (!plane_res) { weston_log("failed to get plane resources: %s\n", strerror(errno)); return; } for (i = 0; i < plane_res->count_planes; i++) { plane = drmModeGetPlane(b->drm.fd, plane_res->planes[i]); if (!plane) continue; sprite = zalloc(sizeof(*sprite) + ((sizeof(uint32_t)) * plane->count_formats)); if (!sprite) { weston_log("%s: out of memory\n", __func__); drmModeFreePlane(plane); continue; } sprite->possible_crtcs = plane->possible_crtcs; sprite->plane_id = plane->plane_id; sprite->current = NULL; sprite->next = NULL; sprite->backend = b; sprite->count_formats = plane->count_formats; memcpy(sprite->formats, plane->formats, plane->count_formats * sizeof(plane->formats[0])); drmModeFreePlane(plane); weston_plane_init(&sprite->plane, b->compositor, 0, 0); weston_compositor_stack_plane(b->compositor, &sprite->plane, &b->compositor->primary_plane); wl_list_insert(&b->sprite_list, &sprite->link); } drmModeFreePlaneResources(plane_res); } static void destroy_sprites(struct drm_backend *backend) { struct drm_sprite *sprite, *next; struct drm_output *output; output = container_of(backend->compositor->output_list.next, struct drm_output, base.link); wl_list_for_each_safe(sprite, next, &backend->sprite_list, link) { drmModeSetPlane(backend->drm.fd, sprite->plane_id, output->crtc_id, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); drm_output_release_fb(output, sprite->current); drm_output_release_fb(output, sprite->next); weston_plane_release(&sprite->plane); free(sprite); } } static int create_outputs(struct drm_backend *b, uint32_t option_connector, struct udev_device *drm_device) { drmModeConnector *connector; drmModeRes *resources; int i; int x = 0, y = 0; resources = drmModeGetResources(b->drm.fd); if (!resources) { weston_log("drmModeGetResources failed\n"); return -1; } b->crtcs = calloc(resources->count_crtcs, sizeof(uint32_t)); if (!b->crtcs) { drmModeFreeResources(resources); return -1; } b->min_width = resources->min_width; b->max_width = resources->max_width; b->min_height = resources->min_height; b->max_height = resources->max_height; b->num_crtcs = resources->count_crtcs; memcpy(b->crtcs, resources->crtcs, sizeof(uint32_t) * b->num_crtcs); for (i = 0; i < resources->count_connectors; i++) { connector = drmModeGetConnector(b->drm.fd, resources->connectors[i]); if (connector == NULL) continue; if (connector->connection == DRM_MODE_CONNECTED && (option_connector == 0 || connector->connector_id == option_connector)) { if (create_output_for_connector(b, resources, connector, x, y, drm_device) < 0) { drmModeFreeConnector(connector); continue; } x += container_of(b->compositor->output_list.prev, struct weston_output, link)->width; } drmModeFreeConnector(connector); } if (wl_list_empty(&b->compositor->output_list)) { weston_log("No currently active connector found.\n"); drmModeFreeResources(resources); return -1; } drmModeFreeResources(resources); return 0; } static void update_outputs(struct drm_backend *b, struct udev_device *drm_device) { drmModeConnector *connector; drmModeRes *resources; struct drm_output *output, *next; int x = 0, y = 0; uint32_t connected = 0, disconnects = 0; int i; resources = drmModeGetResources(b->drm.fd); if (!resources) { weston_log("drmModeGetResources failed\n"); return; } /* collect new connects */ for (i = 0; i < resources->count_connectors; i++) { int connector_id = resources->connectors[i]; connector = drmModeGetConnector(b->drm.fd, connector_id); if (connector == NULL) continue; if (connector->connection != DRM_MODE_CONNECTED) { drmModeFreeConnector(connector); continue; } connected |= (1 << connector_id); if (!(b->connector_allocator & (1 << connector_id))) { struct weston_output *last = container_of(b->compositor->output_list.prev, struct weston_output, link); /* XXX: not yet needed, we die with 0 outputs */ if (!wl_list_empty(&b->compositor->output_list)) x = last->x + last->width; else x = 0; y = 0; create_output_for_connector(b, resources, connector, x, y, drm_device); weston_log("connector %d connected\n", connector_id); } drmModeFreeConnector(connector); } drmModeFreeResources(resources); disconnects = b->connector_allocator & ~connected; if (disconnects) { wl_list_for_each_safe(output, next, &b->compositor->output_list, base.link) { if (disconnects & (1 << output->connector_id)) { disconnects &= ~(1 << output->connector_id); weston_log("connector %d disconnected\n", output->connector_id); drm_output_destroy(&output->base); } } } /* FIXME: handle zero outputs, without terminating */ if (b->connector_allocator == 0) weston_compositor_exit(b->compositor); } static int udev_event_is_hotplug(struct drm_backend *b, struct udev_device *device) { const char *sysnum; const char *val; sysnum = udev_device_get_sysnum(device); if (!sysnum || atoi(sysnum) != b->drm.id) return 0; val = udev_device_get_property_value(device, "HOTPLUG"); if (!val) return 0; return strcmp(val, "1") == 0; } static int udev_drm_event(int fd, uint32_t mask, void *data) { struct drm_backend *b = data; struct udev_device *event; event = udev_monitor_receive_device(b->udev_monitor); if (udev_event_is_hotplug(b, event)) update_outputs(b, event); udev_device_unref(event); return 1; } static void drm_restore(struct weston_compositor *ec) { weston_launcher_restore(ec->launcher); } static void drm_destroy(struct weston_compositor *ec) { struct drm_backend *b = (struct drm_backend *) ec->backend; udev_input_destroy(&b->input); wl_event_source_remove(b->udev_drm_source); wl_event_source_remove(b->drm_source); destroy_sprites(b); weston_compositor_shutdown(ec); if (b->gbm) gbm_device_destroy(b->gbm); weston_launcher_destroy(ec->launcher); close(b->drm.fd); free(b); } static void drm_backend_set_modes(struct drm_backend *backend) { struct drm_output *output; struct drm_mode *drm_mode; int ret; wl_list_for_each(output, &backend->compositor->output_list, base.link) { if (!output->current) { /* If something that would cause the output to * switch mode happened while in another vt, we * might not have a current drm_fb. In that case, * schedule a repaint and let drm_output_repaint * handle setting the mode. */ weston_output_schedule_repaint(&output->base); continue; } drm_mode = (struct drm_mode *) output->base.current_mode; ret = drmModeSetCrtc(backend->drm.fd, output->crtc_id, output->current->fb_id, 0, 0, &output->connector_id, 1, &drm_mode->mode_info); if (ret < 0) { weston_log( "failed to set mode %dx%d for output at %d,%d: %m\n", drm_mode->base.width, drm_mode->base.height, output->base.x, output->base.y); } } } static void session_notify(struct wl_listener *listener, void *data) { struct weston_compositor *compositor = data; struct drm_backend *b = (struct drm_backend *)compositor->backend; struct drm_sprite *sprite; struct drm_output *output; if (compositor->session_active) { weston_log("activating session\n"); compositor->state = b->prev_state; drm_backend_set_modes(b); weston_compositor_damage_all(compositor); udev_input_enable(&b->input); } else { weston_log("deactivating session\n"); udev_input_disable(&b->input); b->prev_state = compositor->state; weston_compositor_offscreen(compositor); /* If we have a repaint scheduled (either from a * pending pageflip or the idle handler), make sure we * cancel that so we don't try to pageflip when we're * vt switched away. The OFFSCREEN state will prevent * further attemps at repainting. When we switch * back, we schedule a repaint, which will process * pending frame callbacks. */ wl_list_for_each(output, &compositor->output_list, base.link) { output->base.repaint_needed = 0; drmModeSetCursor(b->drm.fd, output->crtc_id, 0, 0, 0); } output = container_of(compositor->output_list.next, struct drm_output, base.link); wl_list_for_each(sprite, &b->sprite_list, link) drmModeSetPlane(b->drm.fd, sprite->plane_id, output->crtc_id, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); }; } /* * Find primary GPU * Some systems may have multiple DRM devices attached to a single seat. This * function loops over all devices and tries to find a PCI device with the * boot_vga sysfs attribute set to 1. * If no such device is found, the first DRM device reported by udev is used. */ static struct udev_device* find_primary_gpu(struct drm_backend *b, const char *seat) { struct udev_enumerate *e; struct udev_list_entry *entry; const char *path, *device_seat, *id; struct udev_device *device, *drm_device, *pci; e = udev_enumerate_new(b->udev); udev_enumerate_add_match_subsystem(e, "drm"); udev_enumerate_add_match_sysname(e, "card[0-9]*"); udev_enumerate_scan_devices(e); drm_device = NULL; udev_list_entry_foreach(entry, udev_enumerate_get_list_entry(e)) { path = udev_list_entry_get_name(entry); device = udev_device_new_from_syspath(b->udev, path); if (!device) continue; device_seat = udev_device_get_property_value(device, "ID_SEAT"); if (!device_seat) device_seat = default_seat; if (strcmp(device_seat, seat)) { udev_device_unref(device); continue; } pci = udev_device_get_parent_with_subsystem_devtype(device, "pci", NULL); if (pci) { id = udev_device_get_sysattr_value(pci, "boot_vga"); if (id && !strcmp(id, "1")) { if (drm_device) udev_device_unref(drm_device); drm_device = device; break; } } if (!drm_device) drm_device = device; else udev_device_unref(device); } udev_enumerate_unref(e); return drm_device; } static void planes_binding(struct weston_keyboard *keyboard, uint32_t time, uint32_t key, void *data) { struct drm_backend *b = data; switch (key) { case KEY_C: b->cursors_are_broken ^= 1; break; case KEY_V: b->sprites_are_broken ^= 1; break; case KEY_O: b->sprites_hidden ^= 1; break; default: break; } } #ifdef BUILD_VAAPI_RECORDER static void recorder_destroy(struct drm_output *output) { vaapi_recorder_destroy(output->recorder); output->recorder = NULL; output->base.disable_planes--; wl_list_remove(&output->recorder_frame_listener.link); weston_log("[libva recorder] done\n"); } static void recorder_frame_notify(struct wl_listener *listener, void *data) { struct drm_output *output; struct drm_backend *b; int fd, ret; output = container_of(listener, struct drm_output, recorder_frame_listener); b = (struct drm_backend *)output->base.compositor->backend; if (!output->recorder) return; ret = drmPrimeHandleToFD(b->drm.fd, output->current->handle, DRM_CLOEXEC, &fd); if (ret) { weston_log("[libva recorder] " "failed to create prime fd for front buffer\n"); return; } ret = vaapi_recorder_frame(output->recorder, fd, output->current->stride); if (ret < 0) { weston_log("[libva recorder] aborted: %m\n"); recorder_destroy(output); } } static void * create_recorder(struct drm_backend *b, int width, int height, const char *filename) { int fd; drm_magic_t magic; fd = open(b->drm.filename, O_RDWR | O_CLOEXEC); if (fd < 0) return NULL; drmGetMagic(fd, &magic); drmAuthMagic(b->drm.fd, magic); return vaapi_recorder_create(fd, width, height, filename); } static void recorder_binding(struct weston_keyboard *keyboard, uint32_t time, uint32_t key, void *data) { struct drm_backend *b = data; struct drm_output *output; int width, height; output = container_of(b->compositor->output_list.next, struct drm_output, base.link); if (!output->recorder) { if (output->gbm_format != GBM_FORMAT_XRGB8888) { weston_log("failed to start vaapi recorder: " "output format not supported\n"); return; } width = output->base.current_mode->width; height = output->base.current_mode->height; output->recorder = create_recorder(b, width, height, "capture.h264"); if (!output->recorder) { weston_log("failed to create vaapi recorder\n"); return; } output->base.disable_planes++; output->recorder_frame_listener.notify = recorder_frame_notify; wl_signal_add(&output->base.frame_signal, &output->recorder_frame_listener); weston_output_schedule_repaint(&output->base); weston_log("[libva recorder] initialized\n"); } else { recorder_destroy(output); } } #else static void recorder_binding(struct weston_keyboard *keyboard, uint32_t time, uint32_t key, void *data) { weston_log("Compiled without libva support\n"); } #endif static void switch_to_gl_renderer(struct drm_backend *b) { struct drm_output *output; bool dmabuf_support_inited; if (!b->use_pixman) return; dmabuf_support_inited = !!b->compositor->renderer->import_dmabuf; weston_log("Switching to GL renderer\n"); b->gbm = create_gbm_device(b->drm.fd); if (!b->gbm) { weston_log("Failed to create gbm device. " "Aborting renderer switch\n"); return; } wl_list_for_each(output, &b->compositor->output_list, base.link) pixman_renderer_output_destroy(&output->base); b->compositor->renderer->destroy(b->compositor); if (drm_backend_create_gl_renderer(b) < 0) { gbm_device_destroy(b->gbm); weston_log("Failed to create GL renderer. Quitting.\n"); /* FIXME: we need a function to shutdown cleanly */ assert(0); } wl_list_for_each(output, &b->compositor->output_list, base.link) drm_output_init_egl(output, b); b->use_pixman = 0; if (!dmabuf_support_inited && b->compositor->renderer->import_dmabuf) { if (linux_dmabuf_setup(b->compositor) < 0) weston_log("Error: initializing dmabuf " "support failed.\n"); } } static void renderer_switch_binding(struct weston_keyboard *keyboard, uint32_t time, uint32_t key, void *data) { struct drm_backend *b = (struct drm_backend *) keyboard->seat->compositor; switch_to_gl_renderer(b); } static struct drm_backend * drm_backend_create(struct weston_compositor *compositor, struct weston_drm_backend_config *config) { struct drm_backend *b; struct udev_device *drm_device; struct wl_event_loop *loop; const char *path; const char *seat_id = default_seat; weston_log("initializing drm backend\n"); b = zalloc(sizeof *b); if (b == NULL) return NULL; /* * KMS support for hardware planes cannot properly synchronize * without nuclear page flip. Without nuclear/atomic, hw plane * and cursor plane updates would either tear or cause extra * waits for vblanks which means dropping the compositor framerate * to a fraction. For cursors, it's not so bad, so they are * enabled. * * These can be enabled again when nuclear/atomic support lands. */ b->sprites_are_broken = 1; b->compositor = compositor; b->use_pixman = config->use_pixman; b->configure_output = config->configure_output; b->use_current_mode = config->use_current_mode; if (parse_gbm_format(config->gbm_format, GBM_FORMAT_XRGB8888, &b->gbm_format) < 0) goto err_compositor; if (config->seat_id) seat_id = config->seat_id; /* Check if we run drm-backend using weston-launch */ compositor->launcher = weston_launcher_connect(compositor, config->tty, seat_id, true); if (compositor->launcher == NULL) { weston_log("fatal: drm backend should be run " "using weston-launch binary or as root\n"); goto err_compositor; } b->udev = udev_new(); if (b->udev == NULL) { weston_log("failed to initialize udev context\n"); goto err_launcher; } b->session_listener.notify = session_notify; wl_signal_add(&compositor->session_signal, &b->session_listener); drm_device = find_primary_gpu(b, seat_id); if (drm_device == NULL) { weston_log("no drm device found\n"); goto err_udev; } path = udev_device_get_syspath(drm_device); if (init_drm(b, drm_device) < 0) { weston_log("failed to initialize kms\n"); goto err_udev_dev; } if (b->use_pixman) { if (init_pixman(b) < 0) { weston_log("failed to initialize pixman renderer\n"); goto err_udev_dev; } } else { if (init_egl(b) < 0) { weston_log("failed to initialize egl\n"); goto err_udev_dev; } } b->base.destroy = drm_destroy; b->base.restore = drm_restore; b->prev_state = WESTON_COMPOSITOR_ACTIVE; weston_setup_vt_switch_bindings(compositor); wl_list_init(&b->sprite_list); create_sprites(b); if (udev_input_init(&b->input, compositor, b->udev, seat_id, config->configure_device) < 0) { weston_log("failed to create input devices\n"); goto err_sprite; } if (create_outputs(b, config->connector, drm_device) < 0) { weston_log("failed to create output for %s\n", path); goto err_udev_input; } /* A this point we have some idea of whether or not we have a working * cursor plane. */ if (!b->cursors_are_broken) compositor->capabilities |= WESTON_CAP_CURSOR_PLANE; path = NULL; loop = wl_display_get_event_loop(compositor->wl_display); b->drm_source = wl_event_loop_add_fd(loop, b->drm.fd, WL_EVENT_READABLE, on_drm_input, b); b->udev_monitor = udev_monitor_new_from_netlink(b->udev, "udev"); if (b->udev_monitor == NULL) { weston_log("failed to intialize udev monitor\n"); goto err_drm_source; } udev_monitor_filter_add_match_subsystem_devtype(b->udev_monitor, "drm", NULL); b->udev_drm_source = wl_event_loop_add_fd(loop, udev_monitor_get_fd(b->udev_monitor), WL_EVENT_READABLE, udev_drm_event, b); if (udev_monitor_enable_receiving(b->udev_monitor) < 0) { weston_log("failed to enable udev-monitor receiving\n"); goto err_udev_monitor; } udev_device_unref(drm_device); weston_compositor_add_debug_binding(compositor, KEY_O, planes_binding, b); weston_compositor_add_debug_binding(compositor, KEY_C, planes_binding, b); weston_compositor_add_debug_binding(compositor, KEY_V, planes_binding, b); weston_compositor_add_debug_binding(compositor, KEY_Q, recorder_binding, b); weston_compositor_add_debug_binding(compositor, KEY_W, renderer_switch_binding, b); if (compositor->renderer->import_dmabuf) { if (linux_dmabuf_setup(compositor) < 0) weston_log("Error: initializing dmabuf " "support failed.\n"); } compositor->backend = &b->base; return b; err_udev_monitor: wl_event_source_remove(b->udev_drm_source); udev_monitor_unref(b->udev_monitor); err_drm_source: wl_event_source_remove(b->drm_source); err_udev_input: udev_input_destroy(&b->input); err_sprite: if (b->gbm) gbm_device_destroy(b->gbm); destroy_sprites(b); err_udev_dev: udev_device_unref(drm_device); err_launcher: weston_launcher_destroy(compositor->launcher); err_udev: udev_unref(b->udev); err_compositor: weston_compositor_shutdown(compositor); free(b); return NULL; } static void config_init_to_defaults(struct weston_drm_backend_config *config) { } WL_EXPORT int backend_init(struct weston_compositor *compositor, struct weston_backend_config *config_base) { struct drm_backend *b; struct weston_drm_backend_config config = {{ 0, }}; if (config_base == NULL || config_base->struct_version != WESTON_DRM_BACKEND_CONFIG_VERSION || config_base->struct_size > sizeof(struct weston_drm_backend_config)) { weston_log("drm backend config structure is invalid\n"); return -1; } config_init_to_defaults(&config); memcpy(&config, config_base, config_base->struct_size); b = drm_backend_create(compositor, &config); if (b == NULL) return -1; return 0; }