/* * Copyright © 2008-2011 Kristian Høgsberg * Copyright © 2011 Intel Corporation * Copyright © 2012 Raspberry Pi Foundation * * Permission to use, copy, modify, distribute, and sell this software and * its documentation for any purpose is hereby granted without fee, provided * that the above copyright notice appear in all copies and that both that * copyright notice and this permission notice appear in supporting * documentation, and that the name of the copyright holders not be used in * advertising or publicity pertaining to distribution of the software * without specific, written prior permission. The copyright holders make * no representations about the suitability of this software for any * purpose. It is provided "as is" without express or implied warranty. * * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS * SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND * FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER * RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF * CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #define _GNU_SOURCE #include #include #include #include #include #include #include #include #include #include "config.h" #ifdef HAVE_BCM_HOST # include #else # include "rpi-bcm-stubs.h" #endif #include "compositor.h" #include "gl-renderer.h" #include "evdev.h" /* * Dispmanx API offers alpha-blended overlays for hardware compositing. * The final composite consists of dispmanx elements, and their contents: * the dispmanx resource assigned to the element. The elements may be * scanned out directly, or composited to a temporary surface, depending on * how the firmware decides to handle the scene. Updates to multiple elements * may be queued in a single dispmanx update object, resulting in atomic and * vblank synchronized display updates. * * To avoid tearing and display artifacts, the current dispmanx resource in a * dispmanx element must not be touched. Therefore each element must be * double-buffered, using two resources, the front and the back. The update * sequence is: * 0. the front resource is already in-use, the back resource is unused * 1. write data into the back resource * 2. submit an element update, back becomes in-use * 3. swap back and front pointers (both are in-use now) * 4. wait for update_submit completion, the new back resource becomes unused * * A resource may be destroyed only, when the update removing the element has * completed. Otherwise you risk showing an incomplete composition. * * The dispmanx element used as the native window for EGL does not need * manually allocated resources, EGL does double-buffering internally. * Unfortunately it also means, that we cannot alternate between two * buffers like the DRM backend does, since we have no control over what * resources EGL uses. We are forced to use EGL_BUFFER_PRESERVED as the * EGL_SWAP_BEHAVIOR to avoid repainting the whole output every frame. * * We also cannot bundle eglSwapBuffers into our own display update, which * means that Weston's primary plane updates and the overlay updates may * happen unsynchronized. */ #ifndef ELEMENT_CHANGE_LAYER /* copied from interface/vmcs_host/vc_vchi_dispmanx.h of userland.git */ #define ELEMENT_CHANGE_LAYER (1<<0) #define ELEMENT_CHANGE_OPACITY (1<<1) #define ELEMENT_CHANGE_DEST_RECT (1<<2) #define ELEMENT_CHANGE_SRC_RECT (1<<3) #define ELEMENT_CHANGE_MASK_RESOURCE (1<<4) #define ELEMENT_CHANGE_TRANSFORM (1<<5) #endif /* Enabling this debugging incurs a significant performance hit */ #if 0 #define DBG(...) \ weston_log(__VA_ARGS__) #else #define DBG(...) do {} while (0) #endif /* If we had a fully featured vc_dispmanx_resource_write_data()... */ /*#define HAVE_RESOURCE_WRITE_DATA_RECT 1*/ struct rpi_compositor; struct rpi_output; struct rpi_resource { DISPMANX_RESOURCE_HANDLE_T handle; int width; int height; /* height of the image (valid pixel data) */ int stride; /* bytes */ int buffer_height; /* height of the buffer */ VC_IMAGE_TYPE_T ifmt; }; struct rpi_element { struct wl_list link; struct weston_plane plane; struct rpi_output *output; DISPMANX_ELEMENT_HANDLE_T handle; int layer; int need_swap; int single_buffer; struct rpi_resource resources[2]; struct rpi_resource *front; struct rpi_resource *back; pixman_region32_t prev_damage; struct weston_surface *surface; struct wl_listener surface_destroy_listener; }; struct rpi_flippipe { int readfd; int writefd; struct wl_event_source *source; }; struct rpi_output { struct rpi_compositor *compositor; struct weston_output base; int single_buffer; struct weston_mode mode; struct rpi_flippipe flippipe; DISPMANX_DISPLAY_HANDLE_T display; EGL_DISPMANX_WINDOW_T egl_window; DISPMANX_ELEMENT_HANDLE_T egl_element; struct wl_list element_list; /* struct rpi_element */ struct wl_list old_element_list; /* struct rpi_element */ }; struct rpi_seat { struct weston_seat base; struct wl_list devices_list; struct udev_monitor *udev_monitor; struct wl_event_source *udev_monitor_source; char *seat_id; }; struct rpi_compositor { struct weston_compositor base; uint32_t prev_state; struct udev *udev; struct tty *tty; int max_planes; /* per output, really */ int single_buffer; }; static inline struct rpi_output * to_rpi_output(struct weston_output *base) { return container_of(base, struct rpi_output, base); } static inline struct rpi_seat * to_rpi_seat(struct weston_seat *base) { return container_of(base, struct rpi_seat, base); } static inline struct rpi_compositor * to_rpi_compositor(struct weston_compositor *base) { return container_of(base, struct rpi_compositor, base); } static inline int int_max(int a, int b) { return a > b ? a : b; } static void rpi_resource_init(struct rpi_resource *resource) { resource->handle = DISPMANX_NO_HANDLE; } static void rpi_resource_release(struct rpi_resource *resource) { if (resource->handle == DISPMANX_NO_HANDLE) return; vc_dispmanx_resource_delete(resource->handle); DBG("resource %p release\n", resource); resource->handle = DISPMANX_NO_HANDLE; } static int rpi_resource_realloc(struct rpi_resource *resource, VC_IMAGE_TYPE_T ifmt, int width, int height, int stride, int buffer_height) { uint32_t dummy; if (resource->handle != DISPMANX_NO_HANDLE && resource->width == width && resource->height == height && resource->stride == stride && resource->buffer_height == buffer_height && resource->ifmt == ifmt) return 0; rpi_resource_release(resource); /* NOTE: if stride is not a multiple of 16 pixels in bytes, * the vc_image_* functions may break. Dispmanx elements * should be fine, though. Buffer_height probably has similar * constraints, too. */ resource->handle = vc_dispmanx_resource_create(ifmt, width | (stride << 16), height | (buffer_height << 16), &dummy); if (resource->handle == DISPMANX_NO_HANDLE) return -1; resource->width = width; resource->height = height; resource->stride = stride; resource->buffer_height = buffer_height; resource->ifmt = ifmt; DBG("resource %p alloc\n", resource); return 0; } static VC_IMAGE_TYPE_T shm_buffer_get_vc_format(struct wl_buffer *buffer) { switch (wl_shm_buffer_get_format(buffer)) { case WL_SHM_FORMAT_XRGB8888: return VC_IMAGE_XRGB8888; case WL_SHM_FORMAT_ARGB8888: return VC_IMAGE_ARGB8888; default: /* invalid format */ return VC_IMAGE_MIN; } } static int rpi_resource_update(struct rpi_resource *resource, struct wl_buffer *buffer, pixman_region32_t *region) { pixman_region32_t write_region; pixman_box32_t *r; VC_RECT_T rect; VC_IMAGE_TYPE_T ifmt; uint32_t *pixels; int width; int height; int stride; int ret; #ifdef HAVE_RESOURCE_WRITE_DATA_RECT int n; #endif if (!buffer) return -1; ifmt = shm_buffer_get_vc_format(buffer); width = wl_shm_buffer_get_width(buffer); height = wl_shm_buffer_get_height(buffer); stride = wl_shm_buffer_get_stride(buffer); pixels = wl_shm_buffer_get_data(buffer); if (rpi_resource_realloc(resource, ifmt, width, height, stride, height) < 0) return -1; pixman_region32_init(&write_region); pixman_region32_intersect_rect(&write_region, region, 0, 0, width, height); #ifdef HAVE_RESOURCE_WRITE_DATA_RECT /* XXX: Can this do a format conversion, so that scanout does not have to? */ r = pixman_region32_rectangles(&write_region, &n); while (n--) { vc_dispmanx_rect_set(&rect, r[n].x1, r[n].y1, r[n].x2 - r[n].x1, r[n].y2 - r[n].y1); ret = vc_dispmanx_resource_write_data_rect(resource->handle, ifmt, stride, pixels, &rect, rect.x, rect.y); DBG("%s: %p %ux%u@%u,%u, ret %d\n", __func__, resource, rect.width, rect.height, rect.x, rect.y, ret); if (ret) break; } #else /* vc_dispmanx_resource_write_data() ignores ifmt, * rect.x, rect.width, and uses stride only for computing * the size of the transfer as rect.height * stride. * Therefore we can only write rows starting at x=0. * To be able to write more than one scanline at a time, * the resource must have been created with the same stride * as used here, and we must write full scanlines. */ r = pixman_region32_extents(&write_region); vc_dispmanx_rect_set(&rect, 0, r->y1, width, r->y2 - r->y1); ret = vc_dispmanx_resource_write_data(resource->handle, ifmt, stride, pixels, &rect); DBG("%s: %p %ux%u@%u,%u, ret %d\n", __func__, resource, width, r->y2 - r->y1, 0, r->y1, ret); #endif pixman_region32_fini(&write_region); return ret ? -1 : 0; } static void rpi_element_handle_surface_destroy(struct wl_listener *listener, void *data) { struct rpi_element *element = container_of(listener, struct rpi_element, surface_destroy_listener); element->surface = NULL; } static struct rpi_element * rpi_element_create(struct rpi_output *output, struct weston_surface *surface) { struct rpi_element *element; element = calloc(1, sizeof *element); if (!element) return NULL; element->output = output; element->single_buffer = output->single_buffer; element->handle = DISPMANX_NO_HANDLE; rpi_resource_init(&element->resources[0]); rpi_resource_init(&element->resources[1]); element->front = &element->resources[0]; if (element->single_buffer) { element->back = element->front; } else { element->back = &element->resources[1]; } pixman_region32_init(&element->prev_damage); weston_plane_init(&element->plane, floor(surface->geometry.x), floor(surface->geometry.y)); element->surface = surface; element->surface_destroy_listener.notify = rpi_element_handle_surface_destroy; wl_signal_add(&surface->resource.destroy_signal, &element->surface_destroy_listener); wl_list_insert(output->element_list.prev, &element->link); return element; } static void rpi_element_destroy(struct rpi_element *element) { struct weston_surface *surface = element->surface; if (surface) { if (surface->plane == &element->plane) { /* If a surface, that was on a plane, gets hidden, * it will not appear in the repaint surface list, * is never considered in rpi_output_assign_planes(), * and hence can stay assigned to this element's plane. * We need to reassign it here. */ DBG("surface %p (%dx%d@%.1f,%.1f) to primary plane*\n", surface, surface->geometry.width, surface->geometry.height, surface->geometry.x, surface->geometry.y); weston_surface_move_to_plane(surface, &surface->compositor->primary_plane); } wl_list_remove(&element->surface_destroy_listener.link); } wl_list_remove(&element->link); weston_plane_release(&element->plane); if (element->handle != DISPMANX_NO_HANDLE) weston_log("ERROR rpi: destroying on-screen element\n"); pixman_region32_fini(&element->prev_damage); rpi_resource_release(&element->resources[0]); rpi_resource_release(&element->resources[1]); DBG("element %p destroyed (%u)\n", element, element->handle); free(element); } static void rpi_element_reuse(struct rpi_element *element) { wl_list_remove(&element->link); wl_list_insert(element->output->element_list.prev, &element->link); } static void rpi_element_schedule_destroy(struct rpi_element *element) { wl_list_remove(&element->link); wl_list_insert(element->output->old_element_list.prev, &element->link); } static int rpi_element_damage(struct rpi_element *element, struct wl_buffer *buffer, pixman_region32_t *damage) { pixman_region32_t upload; int ret; if (!pixman_region32_not_empty(damage)) return 0; DBG("element %p update resource %p\n", element, element->back); if (element->single_buffer) { ret = rpi_resource_update(element->back, buffer, damage); } else { pixman_region32_init(&upload); pixman_region32_union(&upload, &element->prev_damage, damage); ret = rpi_resource_update(element->back, buffer, &upload); pixman_region32_fini(&upload); } pixman_region32_copy(&element->prev_damage, damage); element->need_swap = 1; return ret; } static void rpi_element_compute_rects(struct rpi_element *element, VC_RECT_T *src_rect, VC_RECT_T *dst_rect) { struct weston_output *output = &element->output->base; int src_x, src_y; int dst_x, dst_y; int width, height; /* assume element->plane.{x,y} == element->surface->geometry.{x,y} */ src_x = 0; src_y = 0; width = element->surface->geometry.width; height = element->surface->geometry.height; dst_x = element->plane.x - output->x; dst_y = element->plane.y - output->y; if (dst_x < 0) { width += dst_x; src_x -= dst_x; dst_x = 0; } if (dst_y < 0) { height += dst_y; src_y -= dst_y; dst_y = 0; } width = int_max(width, 0); height = int_max(height, 0); /* src_rect is in 16.16, dst_rect is in 32.0 unsigned fixed point */ vc_dispmanx_rect_set(src_rect, src_x << 16, src_y << 16, width << 16, height << 16); vc_dispmanx_rect_set(dst_rect, dst_x, dst_y, width, height); } static void rpi_element_dmx_add(struct rpi_element *element, DISPMANX_UPDATE_HANDLE_T update, int layer) { VC_DISPMANX_ALPHA_T alphasetup = { DISPMANX_FLAGS_ALPHA_FROM_SOURCE | DISPMANX_FLAGS_ALPHA_PREMULT, 255, /* opacity 0-255 */ 0 /* mask resource handle */ }; VC_RECT_T dst_rect; VC_RECT_T src_rect; rpi_element_compute_rects(element, &src_rect, &dst_rect); element->handle = vc_dispmanx_element_add( update, element->output->display, layer, &dst_rect, element->back->handle, &src_rect, DISPMANX_PROTECTION_NONE, &alphasetup, NULL /* clamp */, DISPMANX_NO_ROTATE); DBG("element %p add %u\n", element, element->handle); } static void rpi_element_dmx_swap(struct rpi_element *element, DISPMANX_UPDATE_HANDLE_T update) { VC_RECT_T rect; pixman_box32_t *r; /* XXX: skip, iff resource was not reallocated, and single-buffering */ vc_dispmanx_element_change_source(update, element->handle, element->back->handle); /* This is current damage now, after rpi_assign_plane() */ r = pixman_region32_extents(&element->prev_damage); vc_dispmanx_rect_set(&rect, r->x1, r->y1, r->x2 - r->x1, r->y2 - r->y1); vc_dispmanx_element_modified(update, element->handle, &rect); DBG("element %p swap\n", element); } static void rpi_element_dmx_move(struct rpi_element *element, DISPMANX_UPDATE_HANDLE_T update, int layer) { VC_RECT_T dst_rect; VC_RECT_T src_rect; /* XXX: return early, if all attributes stay the same */ rpi_element_compute_rects(element, &src_rect, &dst_rect); vc_dispmanx_element_change_attributes( update, element->handle, ELEMENT_CHANGE_LAYER | ELEMENT_CHANGE_DEST_RECT | ELEMENT_CHANGE_SRC_RECT, layer, 255, &dst_rect, &src_rect, DISPMANX_NO_HANDLE, VC_IMAGE_ROT0); DBG("element %p move\n", element); } static int rpi_element_update(struct rpi_element *element, DISPMANX_UPDATE_HANDLE_T update, int layer) { struct rpi_resource *tmp; if (element->handle == DISPMANX_NO_HANDLE) { /* need_swap is already true, see rpi_assign_plane() */ rpi_element_dmx_add(element, update, layer); if (element->handle == DISPMANX_NO_HANDLE) weston_log("ERROR rpi: element_add() failed.\n"); } else { if (element->need_swap) rpi_element_dmx_swap(element, update); rpi_element_dmx_move(element, update, layer); } element->layer = layer; if (element->need_swap) { tmp = element->front; element->front = element->back; element->back = tmp; element->need_swap = 0; DBG("new back %p, new front %p\n", element->back, element->front); } return 0; } static uint64_t rpi_get_current_time(void) { struct timeval tv; /* XXX: use CLOCK_MONOTONIC instead? */ gettimeofday(&tv, NULL); return (uint64_t)tv.tv_sec * 1000 + tv.tv_usec / 1000; } static void rpi_flippipe_update_complete(DISPMANX_UPDATE_HANDLE_T update, void *data) { /* This function runs in a different thread. */ struct rpi_flippipe *flippipe = data; uint64_t time; ssize_t ret; /* manufacture flip completion timestamp */ time = rpi_get_current_time(); ret = write(flippipe->writefd, &time, sizeof time); if (ret != sizeof time) weston_log("ERROR: %s failed to write, ret %zd, errno %d\n", __func__, ret, errno); } static int rpi_dispmanx_update_submit(DISPMANX_UPDATE_HANDLE_T update, struct rpi_output *output) { /* * The callback registered here will eventually be called * in a different thread context. Therefore we cannot call * the usual functions from rpi_flippipe_update_complete(). * Instead, we have a pipe for passing the message from the * thread, waking up the Weston main event loop, calling * rpi_flippipe_handler(), and then ending up in * rpi_output_update_complete() in the main thread context, * where we can do the frame finishing work. */ return vc_dispmanx_update_submit(update, rpi_flippipe_update_complete, &output->flippipe); } static void rpi_output_update_complete(struct rpi_output *output, uint64_t time); static int rpi_flippipe_handler(int fd, uint32_t mask, void *data) { struct rpi_output *output = data; ssize_t ret; uint64_t time; if (mask != WL_EVENT_READABLE) weston_log("ERROR: unexpected mask 0x%x in %s\n", mask, __func__); ret = read(fd, &time, sizeof time); if (ret != sizeof time) { weston_log("ERROR: %s failed to read, ret %zd, errno %d\n", __func__, ret, errno); } rpi_output_update_complete(output, time); return 1; } static int rpi_flippipe_init(struct rpi_flippipe *flippipe, struct rpi_output *output) { struct wl_event_loop *loop; int fd[2]; if (pipe2(fd, O_CLOEXEC) == -1) return -1; flippipe->readfd = fd[0]; flippipe->writefd = fd[1]; loop = wl_display_get_event_loop(output->compositor->base.wl_display); flippipe->source = wl_event_loop_add_fd(loop, flippipe->readfd, WL_EVENT_READABLE, rpi_flippipe_handler, output); if (!flippipe->source) { close(flippipe->readfd); close(flippipe->writefd); return -1; } return 0; } static void rpi_flippipe_release(struct rpi_flippipe *flippipe) { wl_event_source_remove(flippipe->source); close(flippipe->readfd); close(flippipe->writefd); } static struct rpi_element * find_rpi_element_from_surface(struct weston_surface *surface) { struct wl_listener *listener; struct rpi_element *element; listener = wl_signal_get(&surface->resource.destroy_signal, rpi_element_handle_surface_destroy); if (!listener) return NULL; element = container_of(listener, struct rpi_element, surface_destroy_listener); if (element->surface != surface) weston_log("ERROR rpi: sanity check failure in %s.\n", __func__); return element; } static struct rpi_element * rpi_assign_plane(struct weston_surface *surface, struct rpi_output *output) { struct rpi_element *element; /* dispmanx elements cannot transform */ if (surface->transform.enabled) { /* XXX: inspect the transformation matrix, we might still * be able to put it into an element; scaling, additional * translation (window titlebar context menus?) */ DBG("surface %p rejected: transform\n", surface); return NULL; } /* only shm surfaces supported */ if (surface->buffer_ref.buffer && !wl_buffer_is_shm(surface->buffer_ref.buffer)) { DBG("surface %p rejected: not shm\n", surface); return NULL; } if (surface->buffer_transform != WL_OUTPUT_TRANSFORM_NORMAL) { DBG("surface %p rejected: unsupported buffer transform\n", surface); return NULL; } /* check if this surface previously belonged to an element */ element = find_rpi_element_from_surface(surface); if (element) { rpi_element_reuse(element); element->plane.x = floor(surface->geometry.x); element->plane.y = floor(surface->geometry.y); DBG("surface %p reuse element %p\n", surface, element); } else { if (!surface->buffer_ref.buffer) { DBG("surface %p rejected: no buffer\n", surface); return NULL; } element = rpi_element_create(output, surface); DBG("element %p created\n", element); } if (!element) { DBG("surface %p rejected: no element\n", surface); return NULL; } return element; } static void rpi_output_assign_planes(struct weston_output *base) { struct rpi_output *output = to_rpi_output(base); struct rpi_compositor *compositor = output->compositor; struct weston_surface *surface; pixman_region32_t overlap; pixman_region32_t surface_overlap; struct rpi_element *element; int n = 0; /* Construct the list of rpi_elements to be used into * output->element_list, which is empty right now. * Re-used elements are moved from old_element_list to * element_list. */ DBG("%s\n", __func__); pixman_region32_init(&overlap); wl_list_for_each(surface, &compositor->base.surface_list, link) { /* always, since all buffers are shm on rpi */ surface->keep_buffer = 1; pixman_region32_init(&surface_overlap); pixman_region32_intersect(&surface_overlap, &overlap, &surface->transform.boundingbox); element = NULL; if (!pixman_region32_not_empty(&surface_overlap) && n < compositor->max_planes) element = rpi_assign_plane(surface, output); if (element) { weston_surface_move_to_plane(surface, &element->plane); DBG("surface %p (%dx%d@%.1f,%.1f) to element %p\n", surface, surface->geometry.width, surface->geometry.height, surface->geometry.x, surface->geometry.y, element); /* weston_surface_move_to_plane() does full-surface * damage, if the plane is new, so no need to force * initial resource update. */ if (rpi_element_damage(element, surface->buffer_ref.buffer, &surface->damage) < 0) { rpi_element_schedule_destroy(element); DBG("surface %p rejected: resource update failed\n", surface); element = NULL; } else { n++; } } if (!element) { weston_surface_move_to_plane(surface, &compositor->base.primary_plane); DBG("surface %p (%dx%d@%.1f,%.1f) to primary plane\n", surface, surface->geometry.width, surface->geometry.height, surface->geometry.x, surface->geometry.y); pixman_region32_union(&overlap, &overlap, &surface->transform.boundingbox); } pixman_region32_fini(&surface_overlap); } pixman_region32_fini(&overlap); } static void rpi_remove_elements(struct wl_list *element_list, DISPMANX_UPDATE_HANDLE_T update) { struct rpi_element *element; wl_list_for_each(element, element_list, link) { if (element->handle == DISPMANX_NO_HANDLE) continue; vc_dispmanx_element_remove(update, element->handle); DBG("element %p remove %u\n", element, element->handle); element->handle = DISPMANX_NO_HANDLE; } } static void rpi_output_destroy_old_elements(struct rpi_output *output) { struct rpi_element *element, *tmp; wl_list_for_each_safe(element, tmp, &output->old_element_list, link) { if (element->handle != DISPMANX_NO_HANDLE) continue; rpi_element_destroy(element); } } static void rpi_output_start_repaint_loop(struct weston_output *output) { uint64_t time; time = rpi_get_current_time(); weston_output_finish_frame(output, time); } static void rpi_output_repaint(struct weston_output *base, pixman_region32_t *damage) { struct rpi_output *output = to_rpi_output(base); struct rpi_compositor *compositor = output->compositor; struct weston_plane *primary_plane = &compositor->base.primary_plane; struct rpi_element *element; DISPMANX_UPDATE_HANDLE_T update; int layer = 10000; DBG("%s\n", __func__); update = vc_dispmanx_update_start(0); /* update all live elements */ wl_list_for_each(element, &output->element_list, link) { if (rpi_element_update(element, update, layer--) < 0) weston_log("ERROR rpi: element update failed.\n"); } /* remove all unused elements */ rpi_remove_elements(&output->old_element_list, update); /* schedule callback to rpi_output_update_complete() */ rpi_dispmanx_update_submit(update, output); /* XXX: if there is anything to composite in GL, * framerate seems to suffer */ /* XXX: optimise the renderer for the case of nothing to render */ /* XXX: if nothing to render, remove the element... * but how, is destroying the EGLSurface a bad performance hit? */ compositor->base.renderer->repaint_output(&output->base, damage); pixman_region32_subtract(&primary_plane->damage, &primary_plane->damage, damage); /* Move the list of elements into the old_element_list. */ wl_list_insert_list(&output->old_element_list, &output->element_list); wl_list_init(&output->element_list); } static void rpi_output_update_complete(struct rpi_output *output, uint64_t time) { rpi_output_destroy_old_elements(output); weston_output_finish_frame(&output->base, time); } static void rpi_output_destroy(struct weston_output *base) { struct rpi_output *output = to_rpi_output(base); DISPMANX_UPDATE_HANDLE_T update; struct rpi_element *element, *tmp; DBG("%s\n", __func__); rpi_flippipe_release(&output->flippipe); update = vc_dispmanx_update_start(0); rpi_remove_elements(&output->element_list, update); rpi_remove_elements(&output->old_element_list, update); vc_dispmanx_element_remove(update, output->egl_element); vc_dispmanx_update_submit_sync(update); gl_renderer_output_destroy(base); wl_list_for_each_safe(element, tmp, &output->element_list, link) rpi_element_destroy(element); wl_list_for_each_safe(element, tmp, &output->old_element_list, link) rpi_element_destroy(element); wl_list_remove(&output->base.link); weston_output_destroy(&output->base); vc_dispmanx_display_close(output->display); free(output); } static int rpi_output_create(struct rpi_compositor *compositor) { struct rpi_output *output; DISPMANX_MODEINFO_T modeinfo; DISPMANX_UPDATE_HANDLE_T update; VC_RECT_T dst_rect; VC_RECT_T src_rect; int ret; float mm_width, mm_height; VC_DISPMANX_ALPHA_T alphasetup = { DISPMANX_FLAGS_ALPHA_FIXED_ALL_PIXELS, 255, /* opacity 0-255 */ 0 /* mask resource handle */ }; output = calloc(1, sizeof *output); if (!output) return -1; output->compositor = compositor; output->single_buffer = compositor->single_buffer; wl_list_init(&output->element_list); wl_list_init(&output->old_element_list); if (rpi_flippipe_init(&output->flippipe, output) < 0) { weston_log("Creating message pipe failed.\n"); goto out_free; } output->display = vc_dispmanx_display_open(DISPMANX_ID_HDMI); if (!output->display) { weston_log("Failed to open dispmanx HDMI display.\n"); goto out_pipe; } ret = vc_dispmanx_display_get_info(output->display, &modeinfo); if (ret < 0) { weston_log("Failed to get display mode information.\n"); goto out_dmx_close; } vc_dispmanx_rect_set(&dst_rect, 0, 0, modeinfo.width, modeinfo.height); vc_dispmanx_rect_set(&src_rect, 0, 0, modeinfo.width << 16, modeinfo.height << 16); update = vc_dispmanx_update_start(0); output->egl_element = vc_dispmanx_element_add(update, output->display, 0 /* layer */, &dst_rect, 0 /* src resource */, &src_rect, DISPMANX_PROTECTION_NONE, &alphasetup, NULL /* clamp */, DISPMANX_NO_ROTATE); vc_dispmanx_update_submit_sync(update); output->egl_window.element = output->egl_element; output->egl_window.width = modeinfo.width; output->egl_window.height = modeinfo.height; output->base.start_repaint_loop = rpi_output_start_repaint_loop; output->base.repaint = rpi_output_repaint; output->base.destroy = rpi_output_destroy; if (compositor->max_planes > 0) output->base.assign_planes = rpi_output_assign_planes; output->base.set_backlight = NULL; output->base.set_dpms = NULL; output->base.switch_mode = NULL; /* XXX: use tvservice to get information from and control the * HDMI and SDTV outputs. See: * /opt/vc/include/interface/vmcs_host/vc_tvservice.h */ /* only one static mode in list */ output->mode.flags = WL_OUTPUT_MODE_CURRENT | WL_OUTPUT_MODE_PREFERRED; output->mode.width = modeinfo.width; output->mode.height = modeinfo.height; output->mode.refresh = 60000; wl_list_init(&output->base.mode_list); wl_list_insert(&output->base.mode_list, &output->mode.link); output->base.current = &output->mode; output->base.origin = &output->mode; output->base.subpixel = WL_OUTPUT_SUBPIXEL_UNKNOWN; output->base.make = "unknown"; output->base.model = "unknown"; /* guess 96 dpi */ mm_width = modeinfo.width * (25.4f / 96.0f); mm_height = modeinfo.height * (25.4f / 96.0f); weston_output_init(&output->base, &compositor->base, 0, 0, round(mm_width), round(mm_height), WL_OUTPUT_TRANSFORM_NORMAL, 1); if (gl_renderer_output_create(&output->base, (EGLNativeWindowType)&output->egl_window) < 0) goto out_output; if (!eglSurfaceAttrib(gl_renderer_display(&compositor->base), gl_renderer_output_surface(&output->base), EGL_SWAP_BEHAVIOR, EGL_BUFFER_PRESERVED)) { weston_log("Failed to set swap behaviour to preserved.\n"); gl_renderer_print_egl_error_state(); goto out_gl; } wl_list_insert(compositor->base.output_list.prev, &output->base.link); weston_log("Raspberry Pi HDMI output %dx%d px\n", output->mode.width, output->mode.height); weston_log_continue(STAMP_SPACE "guessing %d Hz and 96 dpi\n", output->mode.refresh / 1000); return 0; out_gl: gl_renderer_output_destroy(&output->base); out_output: weston_output_destroy(&output->base); update = vc_dispmanx_update_start(0); vc_dispmanx_element_remove(update, output->egl_element); vc_dispmanx_update_submit_sync(update); out_dmx_close: vc_dispmanx_display_close(output->display); out_pipe: rpi_flippipe_release(&output->flippipe); out_free: free(output); return -1; } static void rpi_led_update(struct weston_seat *seat_base, enum weston_led leds) { struct rpi_seat *seat = to_rpi_seat(seat_base); struct evdev_device *device; wl_list_for_each(device, &seat->devices_list, link) evdev_led_update(device, leds); } static const char default_seat[] = "seat0"; static void device_added(struct udev_device *udev_device, struct rpi_seat *master) { struct evdev_device *device; const char *devnode; const char *device_seat; int fd; device_seat = udev_device_get_property_value(udev_device, "ID_SEAT"); if (!device_seat) device_seat = default_seat; if (strcmp(device_seat, master->seat_id)) return; devnode = udev_device_get_devnode(udev_device); /* Use non-blocking mode so that we can loop on read on * evdev_device_data() until all events on the fd are * read. mtdev_get() also expects this. */ fd = open(devnode, O_RDWR | O_NONBLOCK | O_CLOEXEC); if (fd < 0) { weston_log("opening input device '%s' failed.\n", devnode); return; } device = evdev_device_create(&master->base, devnode, fd); if (!device) { close(fd); weston_log("not using input device '%s'.\n", devnode); return; } wl_list_insert(master->devices_list.prev, &device->link); } static void evdev_add_devices(struct udev *udev, struct weston_seat *seat_base) { struct rpi_seat *seat = to_rpi_seat(seat_base); struct udev_enumerate *e; struct udev_list_entry *entry; struct udev_device *device; const char *path, *sysname; e = udev_enumerate_new(udev); udev_enumerate_add_match_subsystem(e, "input"); udev_enumerate_scan_devices(e); udev_list_entry_foreach(entry, udev_enumerate_get_list_entry(e)) { path = udev_list_entry_get_name(entry); device = udev_device_new_from_syspath(udev, path); sysname = udev_device_get_sysname(device); if (strncmp("event", sysname, 5) != 0) { udev_device_unref(device); continue; } device_added(device, seat); udev_device_unref(device); } udev_enumerate_unref(e); evdev_notify_keyboard_focus(&seat->base, &seat->devices_list); if (wl_list_empty(&seat->devices_list)) { weston_log( "warning: no input devices on entering Weston. " "Possible causes:\n" "\t- no permissions to read /dev/input/event*\n" "\t- seats misconfigured " "(Weston backend option 'seat', " "udev device property ID_SEAT)\n"); } } static int evdev_udev_handler(int fd, uint32_t mask, void *data) { struct rpi_seat *seat = data; struct udev_device *udev_device; struct evdev_device *device, *next; const char *action; const char *devnode; udev_device = udev_monitor_receive_device(seat->udev_monitor); if (!udev_device) return 1; action = udev_device_get_action(udev_device); if (!action) goto out; if (strncmp("event", udev_device_get_sysname(udev_device), 5) != 0) goto out; if (!strcmp(action, "add")) { device_added(udev_device, seat); } else if (!strcmp(action, "remove")) { devnode = udev_device_get_devnode(udev_device); wl_list_for_each_safe(device, next, &seat->devices_list, link) if (!strcmp(device->devnode, devnode)) { weston_log("input device %s, %s removed\n", device->devname, device->devnode); evdev_device_destroy(device); break; } } out: udev_device_unref(udev_device); return 0; } static int evdev_enable_udev_monitor(struct udev *udev, struct weston_seat *seat_base) { struct rpi_seat *master = to_rpi_seat(seat_base); struct wl_event_loop *loop; struct weston_compositor *c = master->base.compositor; int fd; master->udev_monitor = udev_monitor_new_from_netlink(udev, "udev"); if (!master->udev_monitor) { weston_log("udev: failed to create the udev monitor\n"); return 0; } udev_monitor_filter_add_match_subsystem_devtype(master->udev_monitor, "input", NULL); if (udev_monitor_enable_receiving(master->udev_monitor)) { weston_log("udev: failed to bind the udev monitor\n"); udev_monitor_unref(master->udev_monitor); return 0; } loop = wl_display_get_event_loop(c->wl_display); fd = udev_monitor_get_fd(master->udev_monitor); master->udev_monitor_source = wl_event_loop_add_fd(loop, fd, WL_EVENT_READABLE, evdev_udev_handler, master); if (!master->udev_monitor_source) { udev_monitor_unref(master->udev_monitor); return 0; } return 1; } static void evdev_disable_udev_monitor(struct weston_seat *seat_base) { struct rpi_seat *seat = to_rpi_seat(seat_base); if (!seat->udev_monitor) return; udev_monitor_unref(seat->udev_monitor); seat->udev_monitor = NULL; wl_event_source_remove(seat->udev_monitor_source); seat->udev_monitor_source = NULL; } static void evdev_input_create(struct weston_compositor *c, struct udev *udev, const char *seat_id) { struct rpi_seat *seat; seat = malloc(sizeof *seat); if (seat == NULL) return; memset(seat, 0, sizeof *seat); weston_seat_init(&seat->base, c); seat->base.led_update = rpi_led_update; wl_list_init(&seat->devices_list); seat->seat_id = strdup(seat_id); if (!evdev_enable_udev_monitor(udev, &seat->base)) { free(seat->seat_id); free(seat); return; } evdev_add_devices(udev, &seat->base); } static void evdev_remove_devices(struct weston_seat *seat_base) { struct rpi_seat *seat = to_rpi_seat(seat_base); struct evdev_device *device, *next; wl_list_for_each_safe(device, next, &seat->devices_list, link) evdev_device_destroy(device); if (seat->base.keyboard) notify_keyboard_focus_out(&seat->base); } static void evdev_input_destroy(struct weston_seat *seat_base) { struct rpi_seat *seat = to_rpi_seat(seat_base); evdev_remove_devices(seat_base); evdev_disable_udev_monitor(&seat->base); weston_seat_release(seat_base); free(seat->seat_id); free(seat); } static void rpi_compositor_destroy(struct weston_compositor *base) { struct rpi_compositor *compositor = to_rpi_compositor(base); struct weston_seat *seat, *next; wl_list_for_each_safe(seat, next, &compositor->base.seat_list, link) evdev_input_destroy(seat); /* destroys outputs, too */ weston_compositor_shutdown(&compositor->base); compositor->base.renderer->destroy(&compositor->base); tty_destroy(compositor->tty); bcm_host_deinit(); free(compositor); } static void vt_func(struct weston_compositor *base, int event) { struct rpi_compositor *compositor = to_rpi_compositor(base); struct weston_seat *seat; struct weston_output *output; switch (event) { case TTY_ENTER_VT: weston_log("entering VT\n"); compositor->base.focus = 1; compositor->base.state = compositor->prev_state; weston_compositor_damage_all(&compositor->base); wl_list_for_each(seat, &compositor->base.seat_list, link) { evdev_add_devices(compositor->udev, seat); evdev_enable_udev_monitor(compositor->udev, seat); } break; case TTY_LEAVE_VT: weston_log("leaving VT\n"); wl_list_for_each(seat, &compositor->base.seat_list, link) { evdev_disable_udev_monitor(seat); evdev_remove_devices(seat); } compositor->base.focus = 0; compositor->prev_state = compositor->base.state; weston_compositor_offscreen(&compositor->base); /* If we have a repaint scheduled (either from a * pending pageflip or the idle handler), make sure we * cancel that so we don't try to pageflip when we're * vt switched away. The OFFSCREEN state will prevent * further attemps at repainting. When we switch * back, we schedule a repaint, which will process * pending frame callbacks. */ wl_list_for_each(output, &compositor->base.output_list, link) { output->repaint_needed = 0; } break; }; } static void rpi_restore(struct weston_compositor *base) { struct rpi_compositor *compositor = to_rpi_compositor(base); tty_reset(compositor->tty); } static void switch_vt_binding(struct weston_seat *seat, uint32_t time, uint32_t key, void *data) { struct rpi_compositor *ec = data; tty_activate_vt(ec->tty, key - KEY_F1 + 1); } struct rpi_parameters { int tty; int max_planes; int single_buffer; }; static struct weston_compositor * rpi_compositor_create(struct wl_display *display, int *argc, char *argv[], int config_fd, struct rpi_parameters *param) { struct rpi_compositor *compositor; const char *seat = default_seat; uint32_t key; static const EGLint config_attrs[] = { EGL_SURFACE_TYPE, EGL_WINDOW_BIT | EGL_SWAP_BEHAVIOR_PRESERVED_BIT, EGL_RED_SIZE, 1, EGL_GREEN_SIZE, 1, EGL_BLUE_SIZE, 1, EGL_ALPHA_SIZE, 0, EGL_RENDERABLE_TYPE, EGL_OPENGL_ES2_BIT, EGL_NONE }; weston_log("initializing Raspberry Pi backend\n"); compositor = calloc(1, sizeof *compositor); if (compositor == NULL) return NULL; if (weston_compositor_init(&compositor->base, display, argc, argv, config_fd) < 0) goto out_free; compositor->udev = udev_new(); if (compositor->udev == NULL) { weston_log("Failed to initialize udev context.\n"); goto out_compositor; } compositor->tty = tty_create(&compositor->base, vt_func, param->tty); if (!compositor->tty) { weston_log("Failed to initialize tty.\n"); goto out_udev; } compositor->base.destroy = rpi_compositor_destroy; compositor->base.restore = rpi_restore; compositor->base.focus = 1; compositor->prev_state = WESTON_COMPOSITOR_ACTIVE; compositor->max_planes = int_max(param->max_planes, 0); compositor->single_buffer = param->single_buffer; weston_log("Maximum number of additional Dispmanx planes: %d\n", compositor->max_planes); weston_log("Dispmanx planes are %s buffered.\n", compositor->single_buffer ? "single" : "double"); for (key = KEY_F1; key < KEY_F9; key++) weston_compositor_add_key_binding(&compositor->base, key, MODIFIER_CTRL | MODIFIER_ALT, switch_vt_binding, compositor); /* * bcm_host_init() creates threads. * Therefore we must have all signal handlers set and signals blocked * before calling it. Otherwise the signals may end in the bcm * threads and cause the default behaviour there. For instance, * SIGUSR1 used for VT switching caused Weston to terminate there. */ bcm_host_init(); if (gl_renderer_create(&compositor->base, EGL_DEFAULT_DISPLAY, config_attrs, NULL) < 0) goto out_tty; if (rpi_output_create(compositor) < 0) goto out_gl; evdev_input_create(&compositor->base, compositor->udev, seat); return &compositor->base; out_gl: compositor->base.renderer->destroy(&compositor->base); out_tty: tty_destroy(compositor->tty); out_udev: udev_unref(compositor->udev); out_compositor: weston_compositor_shutdown(&compositor->base); out_free: bcm_host_deinit(); free(compositor); return NULL; } /* * If you have a recent enough firmware in Raspberry Pi, that * supports falling back to off-line hardware compositing, and * you have enabled it with dispmanx_offline=1 in /boot/config.txt, * then VideoCore should be able to handle almost 100 Dispmanx * elements. Therefore use 80 as the default limit. * * If you don't have off-line compositing support, this would be * better as something like 10. Failing on-line compositing may * show up as visible glitches, HDMI blanking, or invisible surfaces. * * When the max-planes number is reached, rpi-backend will start * to fall back to GLESv2 compositing. */ #define DEFAULT_MAX_PLANES 80 WL_EXPORT struct weston_compositor * backend_init(struct wl_display *display, int *argc, char *argv[], int config_fd) { struct rpi_parameters param = { .tty = 0, /* default to current tty */ .max_planes = DEFAULT_MAX_PLANES, .single_buffer = 0, }; const struct weston_option rpi_options[] = { { WESTON_OPTION_INTEGER, "tty", 0, ¶m.tty }, { WESTON_OPTION_INTEGER, "max-planes", 0, ¶m.max_planes }, { WESTON_OPTION_BOOLEAN, "single-buffer", 0, ¶m.single_buffer }, }; parse_options(rpi_options, ARRAY_LENGTH(rpi_options), argc, argv); return rpi_compositor_create(display, argc, argv, config_fd, ¶m); }