* Allow compare page to look up base, head, own-fork, forkbase-of-head
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @guillep2k
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update routers/repo/compare.go
* as per @guillep2k
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rationalise the names a little
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rationalise the names a little (2)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix 500 with fork of fork
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Prevent 500 on compare different trees
Signed-off-by: Andrew Thornton <art27@cantab.net>
* dotdotdot is perfectly valid in both usernames and repo names
Signed-off-by: Andrew Thornton <art27@cantab.net>
* ensure we can set the head and base repos too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* ensure we can set the head and base repos too (2)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* only set headRepo == baseRepo if isSameRepo
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Initial support of end Range header option in lfs
* Allow end range option to be unspecified
* Declare toByte for consistency
* Factor out content encoding tests from doLfs
This is so Range tests could still use doLfs but without repeating
not related tests
* Add Range header test
* implemented extraHeader
* parametrized expectedStatus
* Add more test cases of Range header
* Fix S1030: should use resp.Body.String()
* Add more tests for edge cases
* Fix tests
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
There is a potential memory leak in `Workerpool` due to the intricacies of
`time.Timer` stopping.
Whenever a `time.Timer` is `Stop`ped its channel must be cleared using a
`select` if the result of the `Stop()` is `false`.
Unfortunately in `Workerpool` these were checked the wrong way round.
However, there were a few other places that were not being checked.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Manage port in submodule refurl
Fix#11304
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* URLJoin is causes a cyclic dependency and possibly isn't what what we want anyway
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Protect against leading .. in scp syntax
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
There is an unfortunate signature change with the api.Context
NotFound function; whereas the normal modules/context/Context
NotFound function requires an error or nil, the api.Context
variant will panic with an NPE if a nil is provided.
This PR will allow api.Context.NotFound to tolerate a being
passed a nil.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* routers: make /compare route available to unauthenticated users
Remove some bits of the compare interface if the user isn't signed in.
Notably, they don't need to see the "New Pull Request" button box nor the
hidden form that would fail to submit due to the POST request continuing to
require proper privileges.
Follow-up commits will improve the UI a bit around this, removing some
"Pull Request" verbiage in favor of "Compare."
* ui: home: show "compare" button for unauthenticated users
This change requires pulling in the BaseRepo unconditionally and
recording if the pull request is in-fact not allowed
(.PullRequestCtx.Allowed). If the user isn't allowed to create a pull
request, either because this isn't a fork or same-fork branch PRs aren't
allowed, then we'll name the button "Compare" instead of "Pull Request."
* ui: branch list: use the new Compare language when available
When viewing the branch listing as an unauthenticated user, you'll get
"Pull Request" buttons. use the new "Compare" verbiage instead, which
matches GitHub behavior when you can't issue a pull request from the
branches.
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Restore checkbox rendering and prevent poor sanitization of spans
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Also fix preview context
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Also fix preview context
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make sure that sendmail processes register with the process manager
* Provide a timeout for these (initially of 5 minutes)
* Add configurable value and tie in to documentation
* Tie in to the admin config page.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Now that emojify.js has been removed, get rid of all instances of has-emoji class that was only used for that. Support for rendering shortcodes should remain in all of these places so it should still work the same.
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
In #9888, it was reported that my earlier pull request #9075 didn't quite function as expected. I was quite hopeful the `ValuesWithShadow()` worked as expected (and, I thought my testing showed it did) but I guess not. @zeripath proposed an alternative syntax which I like:
```ini
[markup.sanitizer.1]
ELEMENT=a
ALLOW_ATTR=target
REGEXP=something
[markup.sanitizer.2]
ELEMENT=a
ALLOW_ATTR=target
REGEXP=something
```
This was quite easy to adopt into the existing code. I've done so in a semi-backwards-compatible manner:
- The value from `.Value()` is used for each element.
- We parse `[markup.sanitizer]` and all `[markup.sanitizer.*]` sections and add them as rules.
This means that existing configs will load one rule (not all rules). It also means people can use string identifiers (`[markup.sanitiser.KaTeX]`) if they prefer, instead of numbered ones.
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Support unicode emojis and remove emojify.js
This PR replaces all use of emojify.js and adds unicode emoji support to various areas of gitea.
This works in a few ways:
First it adds emoji parsing support into gitea itself. This allows us to
* Render emojis from valid alias (😄)
* Detect unicode emojis and let us put them in their own class with proper aria-labels and styling
* Easily allow for custom "emoji"
* Support all emoji rendering and features without javascript
* Uses plain unicode and lets the system render in appropriate emoji font
* Doesn't leave us relying on external sources for updates/fixes/features
That same list of emoji is also used to create a json file which replaces the part of emojify.js that populates the emoji search tribute. This file is about 35KB with GZIP turned on and I've set it to load after the page renders to not hinder page load time (and this removes loading emojify.js also)
For custom "emoji" it uses a pretty simple scheme of just looking for /emojis/img/name.png where name is something a user has put in the "allowed reactions" setting we already have. The gitea reaction that was previously hard coded into a forked copy of emojify.js is included and works as a custom reaction under this method.
The emoji data sourced here is from https://github.com/github/gemoji which is the gem library Github uses for their emoji rendering (and a data source for other sites). So we should be able to easily render any emoji and :alias: that Github can, removing any errors from migrated content. They also update it as well, so we can sync when there are new unicode emoji lists released.
I've included a slimmed down and slightly modified forked copy of https://github.com/knq/emoji to make up our own emoji module. The code is pretty straight forward and again allows us to have a lot of flexibility in what happens.
I had seen a few comments about performance in some of the other threads if we render this ourselves, but there doesn't seem to be any issue here. In a test it can parse, convert, and render 1,000 emojis inside of a large markdown table in about 100ms on my laptop (which is many more emojis than will ever be in any normal issue). This also prevents any flickering and other weirdness from using javascript to render some things while using go for others.
Not included here are image fall back URLS. I don't really think they are necessary for anything new being written in 2020. However, managing the emoji ourselves would allow us to add these as a feature later on if it seems necessary.
Fixes: https://github.com/go-gitea/gitea/issues/9182
Fixes: https://github.com/go-gitea/gitea/issues/8974
Fixes: https://github.com/go-gitea/gitea/issues/8953
Fixes: https://github.com/go-gitea/gitea/issues/6628
Fixes: https://github.com/go-gitea/gitea/issues/5130
* add new shared function emojiHTML
* don't increase emoji size in issue title
* Update templates/repo/issue/view_content/add_reaction.tmpl
Co-Authored-By: 6543 <6543@obermui.de>
* Support for emoji rendering in various templates
* Render code and review comments as they should be
* Better way to handle mail subjects
* insert unicode from tribute selection
* Add template helper for plain text when needed
* Use existing replace function I forgot about
* Don't include emoji greater than Unicode Version 12
Only include emoji and aliases in JSON
* Update build/generate-emoji.go
* Tweak regex slightly to really match everything including random invisible characters. Run tests for every emoji we have
* final updates
* code review
* code review
* hard code gitea custom emoji to match previous behavior
* Update .eslintrc
Co-Authored-By: silverwind <me@silverwind.io>
* disable preempt
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
As seen in trouble shooting #11032 the new feature of Go 1.14 is causing several second delays in startup in certain situations. Debugging shows it spending several seconds handling SIGURG commands during init:
```
6922:04:51.984234 trace init() ./modules/queue/unique_queue_wrapped.go
remote: ) = 69 <0.000012>
remote: [pid 15984] 22:04:51 write(1, "\ttime taken: 236.761\302\265s\n\n", 25 time taken: 236.761µs
remote:
remote: ) = 25 <0.000011>
remote: [pid 15984] 22:04:51 --- SIGURG {si_signo=SIGURG, si_code=SI_TKILL, si_pid=15984, si_uid=0} ---
remote: [pid 15984] 22:04:52 --- SIGURG {si_signo=SIGURG, si_code=SI_TKILL, si_pid=15984, si_uid=0} ---
remote: [pid 15984] 22:04:52 --- SIGURG {si_signo=SIGURG, si_code=SI_TKILL, si_pid=15984, si_uid=0} ---
```
This causes up to 20 seconds added to a push in some cases as it happens for each call of the gitea hook command. This is likely the cause of #10661 as well and would start to effect users once we release 1.12 which would be the first release compiled with Go 1.14. I suspect this is just a slight issue with the upstream implementatation as there have been a few very similar bugs fixed and reported:
https://github.com/golang/go/issues/37741https://github.com/golang/go/issues/37942
We should revisit this in the future and see if a newer version of Go has solved it, but for now disable this option in the environment that gitea hook runs in to avoid it.
* Prevent panic during wrappedConn close at hammertime
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update modules/graceful/server.go
* Fix extraneous debug in goldmark.go
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix checkbox rendering
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Normalize checkbox rendering
Signed-off-by: Andrew Thornton <art27@cantab.net>
* set the checkboxes to readonly instead of disabled
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add control for the rendering of the frontmatter
* Add control to include a TOC
* Add control to set language - allows control of ToC header and CJK glyph choice.
Signed-off-by: Andrew Thornton art27@cantab.net
* as title, do same changs on action view with #10737
* chage default icon from "invalid type" to "question" , because "invalid type" is not a meaningfull icon type
Signed-off-by: a1012112796 <1012112796@qq.com>
* Use AJAX for notifications table
Signed-off-by: Andrew Thornton <art27@cantab.net>
* move to separate js
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate golangci-lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add autoupdating notification count
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix wipeall
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate tests
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Try hidden
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Try hide and hidden
Signed-off-by: Andrew Thornton <art27@cantab.net>
* More auto-update improvements
Only run checker on pages that have a count
Change starting checker to 10s with a back-off to 60s if there is no change
Signed-off-by: Andrew Thornton <art27@cantab.net>
* string comparison!
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @silverwind
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add configurability as per @6543
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add documentation as per @6543
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use CSRF header not query
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Further JS improvements
Fix @etzelia update notification table request
Fix @silverwind comments
Co-Authored-By: silverwind <me@silverwind.io>
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Simplify the notification count fns
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Some OAuth2 providers return quite large structured tokens >32767 bytes.
Gitea currently has a fixed maximum of 32767 bytes for these and
unfortunately due to the convoluted nature of the dependent libraries the
error returned is rather opaque.
Here we manage the error a little better - detecting the rather opaque
github.com/gorilla/securecookie.errEncodedValueTooLong and converting
it to a more readable error.
Further we provide a configurable option to increase the maximum size of
the provided OAuth2 tokens.
Fix#9907
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* First stab at a Gitlab migrations interface.
* Modify JS to show migration for Gitlab
* Properly strip out #gitlab tag from repo name
* Working Gitlab migrations!
Still need to figure out how to hide tokens/etc from showing up in opts.CloneAddr
* Try #2 at trying to hide credentials.
CloneAddr was being used as OriginalURL.
Now passing OriginalURL through from the form and saving it.
* Add go-gitlab dependency
* Vendor go-gitlab
* Use gitlab.BasicAuthClient
Correct CloneURL.
This should be functioning!
Previous commits fixed "Migrated from"
from including the migration credentials.
* Replaced repoPath with repoID globally.
RepoID is grabbed in NewGitlabDownloader
* Logging touchup
* Properly set private repo status.
Properly set milestone deadline time.
Consistently use Gitlab username for 'Name'.
* Add go-gitlab vendor cache
* Fix PR migrations:
- Count of issues is kept to set a non-conflicting PR.ID
- Bool is used to tell whether to fetch Issue or PR comments
* Ensure merged PRs are closed and set with the proper time
* Remove copyright and some commented code
* Rip out '#gitlab' based self-hosted Gitlab support
* Hide given credentials for migrated repos.
CloneAddr was being saved as OriginalURL.
Now passing OriginalURL through from the form and
saving it in it's place
* Use asset.URL directly, no point in parsing.
Opened PRs should fall through to false.
* Fix importing Milestones.
Allow importing using Personal Tokens or anonymous access.
* Fix Gitlab Milestone migration if DueDate isn't set
* Empty Milestone due dates properly return nil, not zero time
* Add GITLAB_READ_TOKEN to drone unit-test step
* Add working gitlab_test.go.
A Personal Access Token, given in env variable GITLAB_READ_TOKEN
is required to run the test.
* Fix linting issues
* Add modified JS files
* Remove pre-build JS files
* Only merged PRs are marged as merged/closed
* Test topics
* Skip test if gitlab is inaccessible
* Grab personal token from username, not password.
Matches Github migration implementation
* Add SetContext() to GitlabDownloader.
* Checking Updated field in Issues.
* Actually fetch Issue Updated time from Gitlab
* Add Gitlab migration GetReviews() stub
* Fix Patch and Clone URLs
* check Updated too
* fix mod
* make vendor with go1.14
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Instead of further handling requests to public which causes issues like #11088, immediately terminate requests to directories js, css, fomantic if no file is found which is checked against a hardcoded list. Maybe there is a way to retrieve the top-level entries below public in a dynamic fashion.
I also added fomantic to the reserved usernames and sorted the list.
Fixes: #11088
* Fix InsertReleases Nil Insert on Attachments
* FIX "No element on slice when insert" & smal refactor
* again
* impruve
* rm useles newline
* Apply suggestions from code review
Co-Authored-By: zeripath <art27@cantab.net>
* process insert as a whole
Co-authored-by: zeripath <art27@cantab.net>
* Update header.tmpl
* Update _repository.less
* Update pull.go
* Update indexer.go
* Update pull.go
* Update pull.go
* Update indexer.go
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
Thanks the advice from lunny and 6543.
* fix forked repo doesn't have language stat
Modified as suggested by 6543.
* fix forked repo doesn't have language stat
simplify the function.
* fix forked repo doesn't have language stat
update the indexer after the loop
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* add request review feature in pull request
add a way to notify specific reviewers to review like github , by add or delet a special type
review . The acton is is similar to Assign , so many code reuse the function and items of
Assignee, but the meaning and result is different.
The Permission style is is similar to github, that only writer can add a review request from Reviewers,
but the poster can recall and remove a review request after a reviwer has revied even if he don't have
Write Premission. only manager , the poster and reviewer of a request review can remove it.
The reviewers can be requested to review contain all readers for private repo , for public, contain
all writers and watchers.
The offical Review Request will block merge if Reject can block it.
an other change: add ui otify for Assignees.
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Signed-off-by: a1012112796 <1012112796@qq.com>
* new change
* add placeholder string
* do some changes follow #10238 to add review requests num on lists also
change icon for review requests to eye
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add `gitea doctor --list` flag to list the checks that will be run, including those by default
* Add `gitea doctor --run` to run specific checks
* Add `gitea doctor --all` to run all checks
* Add db version checker
* Add non-default recalculate merge bases check/fixer to doctor
* Add hook checker (Fix#9878) and ensure hooks are executable (Fix#6319)
* Fix authorized_keys checker - slight change of functionality here because parsing the command is fragile and we should just check if the authorized_keys file is essentially the same as what gitea would produce. (This is still not perfect as order matters - we should probably just md5sum the two files.)
* Add SCRIPT_TYPE check (Fix#10977)
* Add `gitea doctor --fix` to attempt to fix what is possible to easily fix
* Add `gitea doctor --log-file` to set the log-file, be it a file, stdout or to switch off completely. (Fixes previously undetected bug with certain xorm logging configurations - see @6543 comment.)
Signed-off-by: Andrew Thornton <art27@cantab.net>
zeripath
6543
burbon
Kyle Evans
mrsdizzie
Alexander Scheel
赵智超
Lunny Xiao
silverwind
Jordan
Cornel
John Olheiser
Lauris BH
L0veSunshine
techknowlogick
j.yao.SUSE