Backport #21540
At the moment, If admin disable Packages, still show the Packages on the
admin dashboard.
This patch added a check to hide the Packages entry.
Values set for RequiredClaimName and RequiredClaimValue do not show up on UI.
Fix typo `values` to `value`.
Co-authored-by: soumyadey <soumya.dey@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* make blue really blue
* replace blue button and label classes with primary
* add --color-blue-dark
* add light color variants, tweak a few colors
* fix colors
* add comment
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Start making the mobile experience not painful and be actually usable. This contains a few smaller changes to enhance this experience.
- Submit buttons on the review forms aren't columns anymore and are now allowed to be displayed on one row.
- The label/milestone & New Issue buttons were given each own row even tough, there's enough place to do it one the same row. This commit fixes that.
- The issues+Pull tab on repo's has a third item besides the label/milestone & New Issue buttons, the search bar. On desktop there's enough place to do this on one row, for mobile it isn't, currently it was using for each item a new row. This commits fixes that by only giving the searchbar a new row and have the other two buttons on the same row.
- The notification table will now be show a scrollbar instead of overflow.
- The repo buttons(Watch, Star, Fork) on mobile were showing quite big and the SVG wasn't even displayed on the same line, if the count of those numbers were too high it would even overflow. This commit removes the SVG, as there isn't any place to show them on the same row and allows them to have a new row if the counts of those buttons are high.
- The admin page can show you a lot of interesting information, on mobile the System Status + Configuration weren't properly displayed as the margin's were too high. This commit fixes that by reducing the margin to a number that makes sense on mobile.
- Fixes to not overflow the tables but instead force them to be scrollable.
- When viewing a issue or pull request, the comments aren't full-width but instead 80% and aligned to right, on mobile this is a annoyance as there isn't much width to begin with. This commits fixes that by forcing full-width and removing the avatars on the left side and instead including them inline in the comment header.
- Upgrade all JS dependencies minus vue and vue-loader
- Adapt to breaking change of octicons
- Update eslint rules
- Tested Swagger UI, sortablejs and prod build
Continues on from #19202.
Following the addition of pprof labels we can now more easily understand the relationship between a goroutine and the requests that spawn them.
This PR takes advantage of the labels and adds a few others, then provides a mechanism for the monitoring page to query the pprof goroutine profile.
The binary profile that results from this profile is immediately piped in to the google library for parsing this and then stack traces are formed for the goroutines.
If the goroutine is within a context or has been created from a goroutine within a process context it will acquire the process description labels for that process.
The goroutines are mapped with there associate pids and any that do not have an associated pid are placed in a group at the bottom as unbound.
In this way we should be able to more easily examine goroutines that have been stuck.
A manager command `gitea manager processes` is also provided that can export the processes (with or without stacktraces) to the command line.
Signed-off-by: Andrew Thornton <art27@cantab.net>
As discussed on #19221 we should store the results of the last task message on the
crontask and show them on the monitor page.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Add number in queue status to the monitor page so that administrators can
assess how much work is left to be done in the queues.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Add setting for a JSON that maps LDAP groups to Org Teams.
* Add log when removing or adding team members.
* Sync is being run on login and periodically.
* Existing group filter settings are reused.
* Adding and removing team members.
* Sync not existing LDAP group.
* Login with broken group map JSON.
* remove unnecessary web context data fields, and unify the i18n/translation related functions to `Locale`
* in development, show an error if a translation key is missing
* remove the unnecessary loops `for _, lang := range translation.AllLangs()` for every request, which improves the performance slightly
* use `ctx.Locale.Language()` instead of `ctx.Data["Lang"].(string)`
* add more comments about how the Locale/LangType fields are used
It appears that there was a broken merge of the edit.tmpl page during the merge
of #16594 - I am not entirely sure how this happened as the PR was correct.
This PR fixes the broken template.
Fix#18388
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Start adding mechanism to return unhandled data
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Create pushback interface
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add Pausable interface to WorkerPool and Manager
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Implement Pausable and PushBack for the bytefifos
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Implement Pausable and Pushback for ChannelQueues and ChannelUniqueQueues
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Wire in UI for pausing
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add testcases and fix a few issues
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix build
Signed-off-by: Andrew Thornton <art27@cantab.net>
* prevent "race" in the test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix jsoniter mismerge
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix conflicts
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix format
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add warnings for no worker configurations and prevent data-loss with redis/levelqueue
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use StopTimer
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Add setting to OAuth handlers to override local 2FA settings
This PR adds a setting to OAuth and OpenID login sources to allow the source to
override local 2FA requirements.
Fix#13939
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix regression from #16544
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add scopes settings
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix trace logging in auth_openid
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add required claim options
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Move UpdateExternalUser to externalaccount
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Allow OAuth2/OIDC to set Admin/Restricted status
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Allow use of the same group claim name for the prohibit login value
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fixup! Move UpdateExternalUser to externalaccount
* as per wxiaoguang
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add label back in
Signed-off-by: Andrew Thornton <art27@cantab.net>
* adjust localisation
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Refactor install page (db type)
* set correct default DB HOST for different DB TYPE
* remove legacy TiDB from documents
* unify the usage of DB TYPE, in code we only use "mysql". "MySQL" is only shown to users for friendly name.
* Gitea can use TiDB via MySQL protocol
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR registers requests with the process manager and manages hierarchy within the processes.
Git repos are then associated with a context, (usually the request's context) - with sub commands using this context as their base context.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Cleanup and use global style on popups
- Fix typo 'poping' to 'popping'
- Remove most inline 'data-variation' attributes
- Initialize all popups with 'inverted tiny' variation
* misc tweaks
* rename to .tooltip, use jQuery
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Adds the avatar change panel to the edit user page (bottom) and allows admins to change it this way
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: zeripath <art27@cantab.net>
There are multiple places where Gitea does not properly escape URLs that it is building and there are multiple places where it builds urls when there is already a simpler function available to use this.
This is an extensive PR attempting to fix these issues.
1. The first commit in this PR looks through all href, src and links in the Gitea codebase and has attempted to catch all the places where there is potentially incomplete escaping.
2. Whilst doing this we will prefer to use functions that create URLs over recreating them by hand.
3. All uses of strings should be directly escaped - even if they are not currently expected to contain escaping characters. The main benefit to doing this will be that we can consider relaxing the constraints on user names and reponames in future.
4. The next commit looks at escaping in the wiki and re-considers the urls that are used there. Using the improved escaping here wiki files containing '/'. (This implementation will currently still place all of the wiki files the root directory of the repo but this would not be difficult to change.)
5. The title generation in feeds is now properly escaped.
6. EscapePound is no longer needed - urls should be PathEscaped / QueryEscaped as necessary but then re-escaped with Escape when creating html with locales Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
]* fix aria-hidden and tabindex
* use {{template "base/disable_form_autofill"}} instead of {{DisableFormAutofill}}
Co-authored-by: zeripath <art27@cantab.net>
It makes Admin's life easier to filter users by various status.
* introduce window.config.PageData to pass template data to javascript module and small refactor
move legacy window.ActivityTopAuthors to window.config.PageData.ActivityTopAuthors
make HTML structure more IDE-friendly in footer.tmpl and head.tmpl
remove incorrect <style class="list-search-style"></style> in head.tmpl
use log.Error instead of log.Critical in admin user search
* use LEFT JOIN instead of SubQuery when admin filters users by 2fa. revert non-en locale.
* use OptionalBool instead of status map
* refactor SearchUserOptions.toConds to SearchUserOptions.toSearchQueryBase
* add unit test for user search
* only allow admin to use filters to search users
* Allow LDAP Sources to provide Avatars
Add setting to LDAP source to allow it to provide an Avatar.
Currently this is required to point to the image bytes.
Fix#4144
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rename as Avatar Attribute (drop JPEG)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Always synchronize avatar if there is change
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Actually get the avatar from the ldap
Signed-off-by: Andrew Thornton <art27@cantab.net>
* clean-up
Signed-off-by: Andrew Thornton <art27@cantab.net>
* use len()>0 rather than != ""
Signed-off-by: Andrew Thornton <art27@cantab.net>
* slight shortcut in IsUploadAvatarChanged
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add SkipLocal2FA option to other pam and smtp sources
Extend #16954 to allow setting skip local 2fa on pam and SMTP authentication sources
Signed-off-by: Andrew Thornton <art27@cantab.net>
* make SkipLocal2FA omitempty
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
This PR extends #16594 to allow LDAP to be able to be set to skip local 2FA too. The technique used here would be extensible to PAM and SMTP sources.
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR adds a setting to OAuth and OpenID login sources to allow the source to
skip local 2FA authentication.
Fix#13939
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Improve SMTP authentication, Fix user creation bugs and add LDAP cert/key options
This PR has two parts:
Improvements for SMTP authentication:
* Default to use SMTPS if port is 465, and allow setting of force SMTPS.
* Always use STARTTLS if available
* Provide CRAM-MD5 mechanism
* Add options for HELO hostname disabling
* Add options for providing certificates and keys
* Handle application specific password response as a failed user login
instead of as a 500.
Close#16104
Fix creation of new users:
* A bug was introduced when allowing users to change usernames which
prevents the creation of external users.
* The LoginSource refactor also broke this page.
Close#16104
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix add authentication page
There is a regression in #16199 whereby the add authentication page
fails to react to the change in selected type.
This is due to the String() method on the LoginSourceType which is ameliorated
with an Int() function being added.
Following on from this there are a few other related bugs.
Fix#16541
Signed-off-by: Andrew Thornton <art27@cantab.net>
`models` does far too much. In particular it handles all `UserSignin`.
It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in.
Therefore we should move this code out of `models`.
This code has to depend on `models` - therefore it belongs in `services`.
There is a package in `services` called `auth` and clearly this functionality belongs in there.
Plan:
- [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication.
- [x] Move `models.UserSignIn` into `auth`
- [x] Move `models.ExternalUserLogin`
- [x] Move most of the `LoginVia*` methods to `auth` or subpackages
- [x] Move Resynchronize functionality to `auth`
- Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files.
- [x] Move the rest of the LDAP functionality in to the ldap subpackage
- [x] Re-factor the login sources to express an interfaces `auth.Source`?
- I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future
- [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable
- [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2
- [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models.
- [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2
- [x] More simplifications of login_source.go may need to be done
- Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178
- More refactors...?
- OpenID should probably become an auth Method but I think that can be left for another PR
- Methods should also probably be cleaned up - again another PR I think.
- SSPI still needs more refactors.* Rename auth.Auth auth.Method
* Restructure ssh_key.go
- move functions from models/user.go that relate to ssh_key to ssh_key
- split ssh_key.go to try create clearer function domains for allow for
future refactors here.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* Update templates/admin/hook_new.tmpl
Co-authored-by: a1012112796 <1012112796@qq.com>
* Update services/webhook/wechatwork.go
Co-authored-by: a1012112796 <1012112796@qq.com>
* 修善wechatwork
* 修善wechatwork
* fix
* Update locale_cs-CZ.ini
fix
* fix build
* fix
* fix build
* make webhooks.zh-cn.md
* delet unnecessary blank line
* delet unnecessary blank line
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* Update templates/admin/hook_new.tmpl
Co-authored-by: a1012112796 <1012112796@qq.com>
* Update services/webhook/wechatwork.go
Co-authored-by: a1012112796 <1012112796@qq.com>
* 修善wechatwork
* 修善wechatwork
* fix
* fix build
* fix
* fix build
* make webhooks.zh-cn.md
* delet unnecessary blank line
* delet unnecessary blank line
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* fix
* fix
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* fix wechat
* fix wechat
* fix wechat
* fix wechat
* Fix invalid params and typo of email templates (#16394)
Signed-off-by: Meano <meanocat@gmail.com>
* Add LRU mem cache implementation (#16226)
The current default memory cache implementation is unbounded in size and number of
objects cached. This is hardly ideal.
This PR proposes creating a TwoQueue LRU cache as the underlying cache for Gitea.
The cache is limited by the number of objects stored in the cache (rather than size)
for simplicity. The default number of objects is 50000 - which is perhaps too small
as most of our objects cached are going to be much less than 1kB.
It may be worth considering using a different LRU implementation that actively limits
sizes or avoids GC - however, this is just a beginning implementation.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* [skip ci] Updated translations via Crowdin
* Replace `plugins/docker` with `techknowlogick/drone-docker`in ci (#16407)
* plugins/docker -> techknowlogick/drone-docker
* It is multi-arch
* docs: rewrite email setup (#16404)
* Add intro for both the docs page and mailer methods
* Fix numbering level in SMTP section
* Recommends implicit TLS
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
* Validate Issue Index before querying DB (#16406)
* Fix external renderer (#16401)
* fix external renderer
* use GBackground context as fallback
* no fallback, return error
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add checkbox to delete pull branch after successful merge (#16049)
* Add checkbox to delete pull branch after successful merge
* Omit DeleteBranchAfterMerge field in json
* Log a warning instead of error when PR head branch deleted
* Add DefaultDeleteBranchAfterMerge to PullRequestConfig
* Add support for delete_branch_after_merge via API
* Fix for API: the branch should be deleted from the HEAD repo
If head and base repo are the same, reuse the already opened ctx.Repo.GitRepo
* Don't delegate to CleanupBranch, only reuse branch deletion code
CleanupBranch contains too much logic that has already been performed by the Merge
* Reuse gitrepo in MergePullRequest
Co-authored-by: Andrew Thornton <art27@cantab.net>
* [skip ci] Updated translations via Crowdin
* Detect encoding changes while parsing diff (#16330)
* Detect encoding changes while parsing diff
* Let branch/tag name be a valid ref to get CI status (#16400)
* fix #16384#
* refactor: move shared helper func to utils package
* extend Tests
* use ctx.Repo.GitRepo if not nil
* fix
* fix
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* fix build
* fix build
* Apply suggestions from code review
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: myheavily <myheavily>
Co-authored-by: zhaoxin <gitea@fake.local>
Co-authored-by: Meano <Meano@foxmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: GiteaBot <teabot@gitea.io>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Bagas Sanjaya <bagasdotme@gmail.com>
Co-authored-by: Norwin <noerw@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Jimmy Praet <jimmy.praet@telenet.be>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Now that #16069 is merged, some sites may wish to enforce that users are all public, limited or private, and/or disallow users from becoming private.
This PR adds functionality and settings to constrain a user's ability to change their visibility.
Co-authored-by: zeripath <art27@cantab.net>
You can limit or hide organisations. This pull make it also posible for users
- new strings to translte
- add checkbox to user profile form
- add checkbox to admin user.edit form
- filter explore page user search
- filter api admin and public user searches
- allow admins view "hidden" users
- add app option DEFAULT_USER_VISIBILITY
- rewrite many files to use Visibility field
- check for teams intersection
- fix context output
- right fake 404 if not visible
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Encrypt LDAP bind password in db with SECRET_KEY
The LDAP source bind password are currently stored in plaintext in the db
This PR simply encrypts them with the setting.SECRET_KEY.
Fix#15460
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove ui warning regarding unencrypted password
Co-authored-by: silverwind <me@silverwind.io>
* Restore PAM user autocreation functionality
PAM autoregistration of users currently fails due to email invalidity.
This PR adds a new setting to PAM to allow an email domain to be set
or just sets the email to the noreply address and if that fails falls
back to uuid@localhost
Fix#15702
Signed-off-by: Andrew Thornton <art27@cantab.net>
* As per KN4CKER
Signed-off-by: Andrew Thornton <art27@cantab.net>
Xinyu Zhou
Lunny Xiao
John Olheiser
Lauris BH
silverwind
Gusted
Pawel Boguslawski
KN4CK3R
zeripath
Sven Seeberg
wxiaoguang
Dr. Tobias Quathamer
qwerty287
techknowlogick
lengyuqu
6543
Sergey Dryabzhinsky