Unfortunately #16268 contained a terrible error, whereby there was a double
indirection taken when unmarshalling the source data. This fatally breaks
authentication configuration reading.
Fix#16342
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Retry rename on lock induced failures
Due to external locking on Windows it is possible for an
os.Rename to fail if the files or directories are being
used elsewhere.
This PR simply suggests retrying the rename again similar
to how we handle the os.Remove problems.
Fix#16427
Signed-off-by: Andrew Thornton <art27@cantab.net>
* resolve CI fail
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* fix: primary email cannot be activated
* Primary email should be activated together with user account when
'RegisterEmailConfirm' is enabled.
* To fix the existing error state. When 'RegisterEmailConfirm' is enabled, the
admin should have permission to modify the activations status of user email.
And the user should be allowed to send activation to primary email.
* Only judge whether email is primary from email_address table.
* Improve logging and refactor isEmailActive
Co-authored-by: zeripath <art27@cantab.net>
* Add option to provide signed token to verify key ownership
Currently we will only allow a key to be matched to a user if it matches
an activated email address. This PR provides a different mechanism - if
the user provides a signature for automatically generated token (based
on the timestamp, user creation time, user ID, username and primary
email.
* Ensure verified keys can act for all active emails for the user
* Add code to mark keys as verified
* Slight UI adjustments
* Slight UI adjustments 2
* Simplify signature verification slightly
* fix postgres test
* add api routes
* handle swapped primary-keys
* Verify the no-reply address for verified keys
* Only add email addresses that are activated to keys
* Fix committer shortcut properly
* Restructure gpg_keys.go
* Use common Verification Token code
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add checkbox to delete pull branch after successful merge
* Omit DeleteBranchAfterMerge field in json
* Log a warning instead of error when PR head branch deleted
* Add DefaultDeleteBranchAfterMerge to PullRequestConfig
* Add support for delete_branch_after_merge via API
* Fix for API: the branch should be deleted from the HEAD repo
If head and base repo are the same, reuse the already opened ctx.Repo.GitRepo
* Don't delegate to CleanupBranch, only reuse branch deletion code
CleanupBranch contains too much logic that has already been performed by the Merge
* Reuse gitrepo in MergePullRequest
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Handle misencoding of login_source cfg in mssql
Unfortunately due a bug in xorm (see https://gitea.com/xorm/xorm/pulls/1957) updating
loginsources on MSSQL causes them to become corrupted. (#16252)
Whilst waiting for the referenced PR to be merged and to handle the corrupted
loginsources correctly we need to add a wrapper to the `FromDB()` methods to look
for and ignore the misplaced BOMs that have been added.
Fix#16252
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update models/login_source.go
This PR removes multiple unneeded fields from the `HookTask` struct and adds the two headers `X-Hub-Signature` and `X-Hub-Signature-256`.
## ⚠️ BREAKING ⚠️
* The `Secret` field is no longer passed as part of the payload.
* "Breaking" change (or fix?): The webhook history shows the real called url and not the url registered in the webhook (`deliver.go`@129).
Close#16115Fixes#7788Fixes#11755
Co-authored-by: zeripath <art27@cantab.net>
Now that #16069 is merged, some sites may wish to enforce that users are all public, limited or private, and/or disallow users from becoming private.
This PR adds functionality and settings to constrain a user's ability to change their visibility.
Co-authored-by: zeripath <art27@cantab.net>
You can limit or hide organisations. This pull make it also posible for users
- new strings to translte
- add checkbox to user profile form
- add checkbox to admin user.edit form
- filter explore page user search
- filter api admin and public user searches
- allow admins view "hidden" users
- add app option DEFAULT_USER_VISIBILITY
- rewrite many files to use Visibility field
- check for teams intersection
- fix context output
- right fake 404 if not visible
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* #14559 Reduce amount of email notifications for WIP draft PR's
don't notify repo watchers of WIP draft PR's
* #13190 Notification when WIP Pull Request is ready for review
* Send email notification to repo watchers when WIP PR is created
* Send ui notification to repo watchers when WIP PR is created
* send specific email notification when PR is marked ready for review
instead of reusing the CreatePullRequest action
* Fix lint error
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* invent ctx.QueryOptionalBool
* [API] ListReleases add draft and pre-release filter
* Add X-Total-Count header
* Add a release to fixtures
* Add TEST for API ListReleases
* Add migrating message
Signed-off-by: Andrew Thornton <art27@cantab.net>
* simplify messenger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* make messenger an interface
Signed-off-by: Andrew Thornton <art27@cantab.net>
* rename
Signed-off-by: Andrew Thornton <art27@cantab.net>
* prepare for merge
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per tech
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Only check access tokens if they are likely to be tokens
Gitea will currently check every if every password is an access token even though
most passwords are not and cannot be access tokens.
By creation access tokens are 40 byte hexadecimal strings therefore only these should
be checked.
Signed-off-by: Andrew Thornton <art27@cantab.net>
When sorting issues by deadline, the deadline of the milestone the issue
is attached to wasn't taken into account.
It have been changed and the nearest deadline is taken into account for
sorting.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Unfortunately the v180 migration picked up a few non-standalone dependencies. This PR
forcibly copies the important parts back into the migration.
Fix#16150
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add a new table issue_index to store the max issue index so that issue could be deleted with no duplicated index
* Fix pull index
* Add tests for concurrent creating issues
* Fix lint
* Fix tests
* Fix postgres test
* Add test for migration v180
* Rename wrong test file name
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Always store primary email address into email_address table and also the state
* Add lower_email to not convert email to lower as what's added
* Fix fixture
* Fix tests
* Use BeforeInsert to save lower email
* Fix v180 migration
* fix tests
* Fix test
* Remove wrong submited codes
* Fix test
* Fix test
* Fix test
* Add test for v181 migration
* remove change user's email to lower
* Revert change on user's email column
* Fix lower email
* Fix test
* Fix test
* encrypt migration credentials in task persistence
Not sure this is the best approach, we could encrypt the entire
`PayloadContent` instead. Also instead of clearing individual fields in
payload content, we could just delete the task once it has
(successfully) finished..?
* remove credentials of past migrations
* only run DB migration for completed tasks
* fix binding
* add omitempty
* never serialize unencrypted credentials
* fix import order
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Double the avatar size factor
This results on finer Avatar rendering on Hi-DPI display.
* fix test
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Encrypt LDAP bind password in db with SECRET_KEY
The LDAP source bind password are currently stored in plaintext in the db
This PR simply encrypts them with the setting.SECRET_KEY.
Fix#15460
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove ui warning regarding unencrypted password
Co-authored-by: silverwind <me@silverwind.io>
* Restore PAM user autocreation functionality
PAM autoregistration of users currently fails due to email invalidity.
This PR adds a new setting to PAM to allow an email domain to be set
or just sets the email to the noreply address and if that fails falls
back to uuid@localhost
Fix#15702
Signed-off-by: Andrew Thornton <art27@cantab.net>
* As per KN4CKER
Signed-off-by: Andrew Thornton <art27@cantab.net>
zeripath
Meano
Lunny Xiao
Jimmy Praet
Norwin
luzpaz
6543
Adyanth H
sebastian-sauer
KN4CK3R
Sergey Dryabzhinsky
siddweiker
koalp
silverwind