There are IVI tests that require an output. Previously these tests would
silently skip if no outputs were present. However, a test setup should
always have outputs with these tests. Skipping could easily leave the
tests dead without notice.
Make these tests fail instead of skip if there are no outputs.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Acked-by Daniel Stone <daniels@collabora.com>
Two cases are tested: success and fail case of the screen-remove-layer API.
Signed-off-by: Michael Teyfel <mteyfel@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This is a simple wrapper for casting the user data of a wl_resource into
a struct weston_output pointer. Using the wrapper clearly marks all the
places where a wl_output protocol object is used.
Replace ALL wl_output related calls to wl_resource_get_user_data() with
a call to weston_output_from_resource().
v2: add type assert in weston_output_from_resource().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
This API is used to rotate the contents of
application's buffer, which are in the render
order list of the layer. But this API is not
needed because an application can rotate
its buffers with set_buffer_transform request
of wl_surface interface
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This API is used to rotate the contents of
application's buffer. But it is not needed
because an application can rotate its buffers
with set_buffer_transform request of
wl_surface interface.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
GCC 7 now warns on case statements falling through without an explicit
comment that falling through is OK. Insert some to make it happy.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Add helpers to subtract two timespecs, then return the difference in
either milliseconds or nanoseconds. These will be used to compare
timestamps during the repaint cycle.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Paralleling timespec_to_nsec, converts to milliseconds.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
[Pekka: added doc about flooring]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a (timespec) = (timespec) + (msec) helper, to save intermediate
conversions in its users.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a (timespec) = (timespec) + (nsec) helper, to save intermediate
conversions to nanoseconds in its users.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The iteration counter cannot be used to detect non-iterated tests
defined with TEST and FAIL_TEST.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
When a client changes the subsurfaces state, we need to damage
them so the result is visible. We do that by flagging the surfaces
when the state changes and causing damage when committing the
state. This prevents normal repaints from considering these changes
until a commit has happened, and allows the client to atomically
schedule several changes.
This fixes the subsurface_z_order test, which is now marked as expected
to succeed.
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Micah Fedke <micah.fedke@collabora.co.uk>
This is marked as a FAIL_TEST, because the last image comparison fails
due to a bug in Weston.
Jointly authored by Pekka and Emilio.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Reviewed-by: Micah Fedke <micah.fedke@collabora.co.uk>
[Pekka: move weston-tests-env as terminator to EXTRA_DIST, change
ok/FAIL to PASS/FAIL, write diff image only on fail.]
Acked-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Logs is where we write all our custom test logs, let's also put the
screenshots in the same place by default from cluttering the base
directory.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Reviewed-by: Micah Fedke <micah.fedke@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Screenshot tests often want to use the test name for writing out images.
This is a helper to get the test name without writing it multiple times
in the source.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Reviewed-by: Micah Fedke <micah.fedke@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Pick the color 0xCC336699 as AARRGGBB, as if blended on black. This is
the color used with developing the sub-surface shot tests.
No other big reason than it should not be black to have better chances
of catching blending problems.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Micah Fedke <micah.fedke@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
This is a new desktop shell plugin, specifically written for tests. It
implements the bare minimum of a WM with predictable window positioning.
It offers a known static background without forking any helper clients
and therefore avoids any races with executing screenshot-based tests.
Not forking unused helper clients also reduces the load during a test
run.
The code was written by Quentin as a part of a much larger private
patch. Pekka, following Emilio's example, extracted just the shell
plugin parts as a stand-alone patch and wrote the commit message.
[Emilio: update to latest weston_layer and shell_init API]
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Micah Fedke <micah.fedke@collabora.co.uk>
[Pekka: fix build]
buffer-count was introduced in line with a Mesa change which forced
an earlier block on frame events to try to enforce double-buffering
where available.
The Mesa change has since been reverted (Mesa commit 9ca6711faa), as
this had unpleasant interactions with buffer_age in particular, so this
test is no longer valid.
Additionally, it only worked on backends which initialised EGL (not
headless-backend, where tests generally run), which can be flaky due to
initialisation races. Not only that, but on the DRM backend, we can
legitimately enter triple-buffering due to promoting the surface to a
hardware plane, skipping GPU composition.
In light of all this, just remove the test.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Test adds 3 layers in a screen's render order list.
First, it adds in the order which layers are created.
Later, test cleans the render order list,
and adds layers in reverse order.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Test adds 3 surfaces in a layer's render order list.
First, it adds in the order which surfaces are created.
Later, test cleans the render order list, and adds surfaces in reverse
order.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The int32_t type is defined in stdint.h.
The musl C library is very conservative in the headers that it
internally includes, and stdint.h is not included by any other header,
unlike with glibc or uClibc, which breaks the build.
Add the missing header.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Use different functions so we cannot load a libweston common module in
weston directly or the other way around.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Currently, layers’ order depends on the module loading order and it does
not survive runtime modifications (like shell locking/unlocking).
With this patch, modules can safely add their own layer at the expected
position in the stack, with runtime persistence.
v4 Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
[Pekka: fix three whitespace issues]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We know we're not going to succeed if the binary isn't installed, so
skip the test in that case.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Following on from b8c16c995b, extend the family tree being tested by
place_above and place_below a little, ensuring that subsurfaces can't be
placed above or below surfaces which are related to them, but aren't
their immediate parent or sibling.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The parent of a subsurface can be used as a sibling in the place_below
and place_above calls. However this did not work when the parent is
nested, so fix the sibling check and add a test to check this case.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Might be a bit of an overkill, but still. One should cleanup after
themselves.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Adds a safe strtol helper function, modeled loosely after Wayland
scanner's strtouint. This encapsulates the various quirks of strtol
behavior, and streamlines the interface to just handling base-10 numbers
with a simple true/false error indicator and a uint32_t return by
reference.
Test cases are loosely derived from an earlier patch by Imran Zaman.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
[With hexadecimal color values now handled via their own routine,
re-introduce the negative unsigned numbers fix.]
strtoul() has a side effect that when given a string representing a
negative number, it treats it as a high value hexadecimal. IOW,
strtoul("-42", &val) sets val to 0xffffffd6. This could potentially
result in unintended surprise behaviors.
Catch this by using strtol() and then manually check for the negative
value. This logic is modelled after Wayland's strtouint().
Note that this change unfortunately reduces the range of parseable
numbers from [0,UINT_MAX] to [0,INT_MAX]. The current users of
weston_config_section_get_uint() are anticipating numbers far smaller
than either of these limits, so the change is believed to have no impact
in practice.
Also add a test case for negative numbers that catches this error
condition.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Previously weston_config_section_get_uint was serving dual purpose for
parsing both unsigned decimal integer values (ids, counts, seconds,
etc.) and hexadecimal values (colors), by relying on strtoul's
auto-detection mechanism.
However, this usage is unable to catch certain kinds of error
conditions, such as specifying a negative number where an unsigned
should be used. And for colors in particular, it would misparse hex
values if the leading 0x was omitted. E.g. "background-color=99999999"
would render a near-black background (effectively 0x05f5e0ff) instead of
medium grey, and "background-color=ffffffff" would be treated as an
error rather than white. "background-color=0x01234567",
"background-color=01234567", and "background-color=1234567" each
resulted in the value being parsed as hexadecimal, octal, and decimal
respectively, resulting in colors 0x01234567, 0x00053977, and 0x0012d687
being displayed.
This new routine forces hexadecimal to be used in all cases when parsing
color values, so "0x01234567" and "01234567" result in the same color
value, "99999999" is grey, and "ffffffff" is white. It also requires
exactly 8 or 10 digits (other lengths likely indicate typos), or the
value "0" (black).
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
The reduction in range limits does have an effect for color values,
which are expressed as hexadecimal values from 0x00000000 to
0xFFFFFFFF. By limiting the range to INT_MAX, color values of
0x80000000 and up are in fact lost.
This reverts commit 6351fb08c2.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Yong Bakos <ybakos@humanoriented.com>
strtoul() has a side effect that when given a string representing a
negative number, it returns a negated version as the value, and does not
flag an error. IOW, strtoul("-42", &val) sets val to 42. This could
potentially result in unintended surprise behaviors, such as if one were
to inadvertantly set a config param to -1 expecting that to disable it,
but with the result of setting the param to 1 instead.
Catch this by using strtol() and then manually check for the negative
value. This logic is modelled after Wayland's strtouint().
Note that this change unfortunately reduces the range of parseable
numbers from [0,UINT_MAX] to [0,INT_MAX]. The current users of
weston_config_section_get_uint() are anticipating numbers far smaller
than either of these limits, so the change is believed to have no impact
in practice.
Also add a test case for negative numbers that catches this error
condition.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Check errno, which is set of over/underflow, out of range, etc. Also
check for empty strings (the usages covered in this patch already also
cover the case where there are non-digits present). Set errno to 0
before making the strto*l call in case of pre-existing errors
(i.e. ENOTTY when running under the testsuite).
This follows the error checking style used in Wayland
(c.f. wayland-client.c and scanner.c).
In tests, also check errno, and add testcases for parsing '0'.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
This is a follow up for weston-test to manually
set mapped status for views/surfaces it controls
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Implement a simple register and lookup for function tables. This is
intended for plugins to expose APIs to other plugins.
It has been very hard to arrange a plugin to be able to call into
another plugin without modifying Weston core to explicitly support each
case. This patch fixes that.
The tests all pass.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
The name suggests that it activates surfaces, but the code says it
rather just assigns keyboard focus. Rename it for clarity, and so the
original function name could be used for something more appropriate
later. Switch order of parameters since keyboard focus is a property of
the seat. Update all callers as appropriate.
Change was asked for by pq, May 26, 2016:
"This should be called weston_seat_set_keyboard_focus(seat, surface).
Keyboard focus is a property of the seat."
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Useful for pointing out where the image comparisons fail.
Internal-screenshot-test is modified to save the visualization if the
test fails.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Screenshooting does not involve creating a wl_surface, so using struct
surface is superfluous.
Return a struct buffer instead. It could have been just a
pixman_image_t, but setting up proper destruction would be a bit more
work. Should not hurt to keep the wl_buffer around until the user is
ready to free the image.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This rewrites write_surface_as_png() into write_image_as_png(), which
operates on a pixman_image_t instead of a struct surface.
This is part of the migration to use pixman_image_t everywhere without
superfluous parameters/members.
Now the image saving handles more than just ARGB32 format, presumably.
At least it does not assume everything is always ARGB32.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This rewrites load_surface_from_png() to load_image_from_png(), to
return a pixman_image_t instead of a struct surface.
A loaded image has no need for wl_buffer or wl_surface or any of the
associated attributes. This is part of unifying to make everything use
pixman_image_t.
cairo_surface_flush() is added, because Cairo documentation for
cairo_image_surface_get_data() says you have to flush after drawing,
before using the data. It is unclear if loading a PNG counts as drawing,
so stay on the safe side.
load_image_from_png() now pays attention to the pixel format returned by
Cairo, which seems to come out as CAIRO_FORMAT_RGB24 in
internal-screenshot-test, not as CAIRO_FORMAT_ARGB32 as expected. I do
not know if Cairo actually guarantees the x8/a8 channel to be 0xff for
RGB24, but better to not trust it. Therefore the image is explicitly
converted to a8r8g8b8 as needed. This also adds support for loading A8
and RGB16_565 images, provided that Cairo delivers them.
The cairo surface is now wrapped directly into a pixman_image_t. If the
pixel format conversion is not needed, this eliminates a copy of the
image data. The Cairo surface will get automatically destroyed with the
Pixman image.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
check_surfaces_geometry() is removed as it was not used by anything, and
unlikely would be.
check_surfaces_equal() is merged into check_surfaces_match_in_clip(),
passing a NULL clip means to compare whole images.
check_surfaces_match_in_clip() is converted to work on pixman_image_t
instead of struct surface. The function is only concerned about
comparing images in memory, and does not care about a wl_buffer or a
wl_surface.
The verbosity of image comparisons is greatly reduced. An image mismatch
no longer prints a flood of raw pixel values. This will be replaced
later with a function writing out an error image instead.
Degenerate comparisons are no longer accepted, be that clip outside
images or zero area. Those are an indication of a programmer error.
The pixel format assumptions are made more visible in the code.
A new internal helper image_check_get_roi() computes and verifies the
area to be compared. Image iterator helper makes it simpler to write
manual pixel-poking loops.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Change create_shm_buffer() to handle any pixel format known to Pixman.
Presumably in the future we might want to test e.g. RGB565 content with
screenshot tests.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
No users remain outside the file. This will allow to fix the assumptions
in the function.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This removes the uses of create_shm_buffer() from this test.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This removes the uses of create_shm_buffer() from this test.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Pekka Paalanen
Michael Teyfel
Ucan, Emre (ADITG/SW1)
Daniel Stone
Emilio Pozuelo Monfort
Quentin Glidic
Yann E. MORIN
Arnaud Vrac
Emil Velikov
Bryce Harrington
Jussi Kukkonen
Armin Krezović