this adds a mechanism to mask the views belonging to a layer
to an arbitrary rect, in the global space. The parts that don't fit
in that rect will be clipped away.
Supported by the gl and pixman renderer only for now.
This introduces a new struct, weston_layer_entry, which is now used
in place of wl_list to keep the link for the layer list in weston_view
and the head of the list in weston_layer.
weston_layer_entry also has a weston_layer*, which points to the layer
the view is in or, in the case the entry it's the head of the list, to
the layer itself.
Currently, there is a fun flicker when toggling maximization or
fullscreen on a window in mutter or more sophisicated compositors
and WMs.
What happens is that the client want so go maximized, so we
calculate the size that we want the window to resize to (640x480),
and then add on its margins to find the buffer size (+10 = 660x500),
and then send out a configure event for that size. The client
renders to that size, realizes that it's maximized, and then
says "oh hey, my margins are actually 0 now!", and so the compositor
has to send out another configure event.
In order to fix this, make the the configure request correspond to
the window geometry we'd like the window to be at. At the same time,
replace set_margin with set_window_geometry, where we specify a rect
rather than a border around the window.
This new structure is used for both weston_surface.pending and
weston_subsurface.cached.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Pekka Paalanen <ppaalanen@gmail.com>
send_configure was originally modelled after
wl_shell_surface::send_configure, which takes these arguments. However,
the X WM and xdg_surface::configure variants don't use these arguments.
We already store the resize edges for a surface while it's being
resized, so just use the saved state in the wl_shell_surface variant.
The CURSOR_PLANE capability indicates that the backend has a concept of a
cursor plane and can handle a cursor without compositing. This is currently
only advertised by the DRM backend.
The ARBITRARY_MODE flag specifies that the backend is capable of switching to
virtually any resolution. This is currently only advertised in the RDP
backend. While it's a bit buggy right now, it should be capable of this.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Bump wl_scaler and wl_viewport versions to 2. Add new requests
wl_viewport.set_source and .set_destination, which are meant to replace
wl_viewport.set request.
Now a client can set and unset just one of source rectangle and
destination size. Define the semantics when one of these is unset.
Implement these semantics changes in compositor and pixman renderer.
GL-renderer does not need changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Remove the explicit boolean variable, and use illegal width to denote
"not set".
Split the boolean into two, so we can later start having buffer.src_*
and surface.* set or not set independently. This may become useful when
the wl_viewport interface is changed to allow modifying them separately.
At the moment, both buffer.src_width and surface.width conditions are
always in sync.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Queueing in the Presentation extension requires splitting the viewport
state into buffer state and surface state. To conveniently allow
assigning only one, the other, or both, reorganize the
weston_buffer_viewport structure.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The client needs to know that the pointer is at a different position in
its surface. We can't send motion as that corresponds to the pointer
actually moving. Leaving the surface and entering at the new position
is a better semantic match and doesn't correspond to pointer motion
or user input.
https://bugs.freedesktop.org/show_bug.cgi?id=71927
This was always a little iffy. At least it could have been a signal,
but we now have focus signal, so lets just use that. We lose
the ability to detect unresponsive clients at key event time, but we
could add that back by adding a key_signal.
Remove the listener for output destroy from weston_view and instead
iterate views owned by the shell in its own output destroy listener.
This simplifies the code a bit since keeping the view listening for the
destroy on the right output was a bit complicated. This also removes the
function pointer output_destroyed from weston_view. The only user for it
was desktop shell, but now this is all handled in shell.c.
Since that signal is per output, it is necessary to track in which
output a view is in so that the signal is handled properly.
Instead, add a compositor wide output moved signal, that is handled by
the shell. The shell iterates over the layers it owns to move views
appropriately.
This seems like a better name, and will not conflict if someone later
extends wl_surface with a request scaler_set (yeah, unlikely).
This code was written by Jonny Lamb, I just diffed his branches and made
a patch for Weston.
Cc: Jonny Lamb <jonny.lamb@collabora.co.uk>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
With multiple touch screens on one seat, the touch points IDs from the
different evdev devices may overlap. We have to remap the IDs we forward
to core weston so that the touch points all have unique IDs within the seat.
Closes: https://bugs.freedesktop.org/show_bug.cgi?id=73003
Implements wl_surface_scaler.set by setting desired
src_{x,y,width,height} and dst_{width,height} values in the
weston_buffer_viewport struct, then altering coordinates in
weston_surface_to_buffer* functions if there is a scaler set for said
surface.
Surfaces that are created by clients get their size automatically updated
by the attach/commit. Surfaces created directly by shells (such as black
surfaces) sometimes need to be manually resized. This function allows you
to do that while being somewhat less messy than messing with the internals
of weston_surface manually.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
If the saved position for a fullscreen or maximized output view is in an
output that has been unplugged, the coordinates don't make sense
anymore. In that case, invalidate them and use the initial position
algorithm when changing them back to the basic state.
Signed-off-by: Zhang, Xiong Y <xiong.y.zhang@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Previously, if a pointer was inside an output that was unplugged, it
could potentialy end up outside any valid output forever. With this
patch, the pointer is moved to the "closest" output to the pointer.
Set a flag when an output is being destroyed and use that to avoid
repainting. This allows functions that schedule an output repaint to
be called when the output is being destroyed without causing the
compositor to crash.
Use the output destroy signal to move the views in the event the output
was unplugged.
Signed-off-by: Zhang, Xiong Y <xiong.y.zhang@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Previously, when an output was moved due to another output being
unplugged, the views on the first output would remain in the same
position.
This patch adds an output_move signal that the views listen too in
order to repostion themselves in the event of an unplug.
Signed-off-by: Zhang, Xiong Y <xiong.y.zhang@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
This has a couple of additional implications for the internal weston API:
1) weston_view_configure no longer exists. Use weston_view_set_position
instead.
2) The weston_surface.configure callback no longer takes a width and
height. If you need these, surface.width/height are set before
configure is called. If you need to know when the width/height
changes, you must track that yourself.
It’s tied too deeply into the shell’s window stacking and ordering code
to legitimately be split out into compositor.c. Inline it in the shell,
and refactor some code around it a little, tidying up the stacking
behaviour for fullscreen surfaces.
Replace the two functions getting the intended surface dimensions from
the surface's buffer and buffer transformation parameters by a single
function that just set the surface size according to all the buffer
state.
The old functions were always called in pairs, and always assigned to
the surface dimension variables.
This function also deals with a NULL buffer by setting the dimensions to
zero, just like the callers used to do.
The new function has no users outside this source file, so do not export
it. This basically unexports the old functions.
Gather the variables affecting the coordinate transformations between
buffer and local coordinates into a new struct weston_buffer_viewport.
This will be more useful later, when the crop & scale extension is
implemented.
Adding the drag and drop grab interface for touch screen in
src/data-device.c, so the server can handle touch screen
drag and drop operation.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Kristian Hogsberg <hoegsberg@gmail.com>
with the surface ref-count feature a surface may live on after its
resource was destroyed. so listen for the resource destroy signal
and set the focus to NULL.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
If a view which has focus is destroyed, we would send a leave
event while changing focus, causing a segfault. Prevent this
by listening to the view's destroy signal and removing it from
the pointer focus.
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Add an animation which moves a surface to a new location, at the same
time as also rescaling it to a different size from the origin, rather
than the existing scale animation which resizes from the centre.
[pochu: rebased, ported to weston_view]
Add the ability to bind to modifiers; the binding is armed when a key
which sets the requested modifier is pressed, and triggered if the key
is released with no other keys having been pressed in the meantime, as
well as mouse buttons or scroll axes.
This only works for direct modifiers (e.g. Shift and Alt), not modifiers
which latch or lock.
[pochu: rebased]
When enabled, this will make all but the keyboard-focused window dim.
Also the background gets dimmed, if there are any windows open. The
panel is not dimmed.
When the keyboard focus changes, the change in dimming is animated.
The dimming is implemented with transparent solid-color surfaces, two at
most. The net effect of two overlapping dim surfaces is kept constant
during animations (stable fade animation).
There is a new weston.ini option "focus-animation", that defaults to
none, and can be set to "dim-layer" to enable the focus change
animation.
[pq: Sliced, squashed, and rebased the patch series. Fixed surface alpha
interaction with the switcher. Wrote the commit message.]
[pochu: rebased, ported to weston_view]
The signal will be emitted after the pointer is moved. A shell plugin
can listen to the signal and activate certain effects when the pointer
touches the screen corners, for instance.
Both the Pixman renderer and the X11 backend contained effectively the same
region transformation code. This commit adds a weston_transformed_region
function and changes pixman-renderer and compositor-x11 to use it.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Giulio Camuffo
Jasper St. Pierre
Jason Ekstrand
George Kiagiadakis
Kristian Høgsberg
Jonas Ådahl
Pekka Paalanen
Ander Conselvan de Oliveira
Jonny Lamb
Zhang, Xiong Y
Philip Withnall
Emilio Pozuelo Monfort
Daniel Stone
Louis-Francis Ratté-Boulianne