This bump is required for the following patch that adds strict version
consistency checking between weston and libweston.
This bumps libweston major from 0 to 1. All libweston users need to
adapt. This major bump would have to be made on the 1.11.91 release
anyway.
Cc: Giulio Camuffo <giuliocamuffo@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
We have agreed to use the major as the ABI-version, so talk about major
to avoid confusion.
Remove unncessary or incorrect wording related to breaking ABI on minor
bumps.
Explain a little about the weston vs. libweston version numbers.
v2:
- Add a paragraph about ABI breaks between alpha and .0 releases.
- clarify pre-release definition
- Add two paragraphs about libweston versions differing from weston
version and how to use pkg-config properly.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
libweston has separate version numbering from weston because of
development needs.
During development, weston version is major.minor.90 which will never be
a release version number. While developing, we may break the libweston
backward-compatibility, in which case libweston_major_version will be
bumped. This means that libweston_major_version > weston_major_version
but only during the development period and for the pre-releases. When
the official x.y.0 release is made, weston and libweston versions will
get synchronized as explained in releasing.txt.
The reason we do this is that e.g. during the weston 3.0.90 development
period we must be able to install libweston-4.so because the development
has broken the compatibility and so we cannot install it as libweston-3.so
anymore. However, we cannot bump weston to 4.0.90, because then the
official release would go backwards in numbers to 4.0.0.
This also means that weston pre-releases major.minor.9x may install
libweston-(major+1).so. There is also libweston-(major+1).pc file but it
will give the weston version as the version number. IOW, pkg-config
check for 'libweston-M < M.0.0' matches only the pre-releases of the
libweston major version M. Hence, 'libweston-M >= M.0.0' cannot be
satisfied by pre-releases.
The weston and libweston version numbers MUST be identical in all
releases except the pre-releases major.minor.9x.
When the 1.11.91 pre-release is made, the rules imply that libweston
version will be bumped from 0.0.0 to 1.11.91. The bumping will continue
up to the 1.12.0 release. After the bump to 1.12.90, the libweston
version may be bumped to 2.0.0. Then the rules imply that:
- 1.12.9x pre-releases install libweston 2.0.0
- the next .0 release is 2.0.0 containing libweston 2.0.0
If the 1.12 stable branch will see additional releases, those will be
numbered 1.12.1, 1.12.2, etc. with the libweston version being the same
as the release version number.
If we have release 2.0.91 without libweston major bump, then libweston
version will match the release version, leading up to 2.1.0.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This way, the environment is correctly preserved for weston. Since
commit 636156d5f6, clearenv() is only
called when we open a new PAM session, so it makes sense to only use a
login shell in that case.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
shared/image-loader.c: In function 'load_image':
shared/image-loader.c:434:12: warning: 'image' may be used uninitialized
in this function [-Wmaybe-uninitialized]
} else if (!image) {
^
Warning produced by GCC 5.3 and 6.1, with -Og.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
libweston/gl-renderer.c: In function 'compress_bands':
libweston/gl-renderer.c:481:6: warning: 'merged' may be used
uninitialized in this function [-Wmaybe-uninitialized]
if (!merged) {
^
Warning produced by GCC 5.3 and 6.1, with -Og.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
There is a UTF-8 no-break space (U+A0, U8+C2A0) in the definition of
macro NSC_RESET in the case of 1.2.2 <= FreeRDP < 2.0.
This is causing build issues (\302 is 0xC2, \240 is 0xA0):
http://autobuild.buildroot.net/results/f49/f49a9cbb7bdc5d9e05dcf0a20bd83f059e234e74/build-end.log
Fix that by using a plain, boring space U+20.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Instead we store the buffer move and just use it when the signal is
fired.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
This is what we are interested in for real, and new_buffer is wrongly
named.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Without this make distcheck fails would we ever add any other built
sources to libweston-desktop. Also remove the now redundant leftover
nodist sources from desktop-shell source list.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Also remove ${pkgincludedir} to be on par with libweston.pc.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
All the shell protocol details, Xwayland glue and popups (and their
grab) are now handled in libweston-desktop.
Fullscreen methods (for wl_shell) are removed for now.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Giulio Camuffo <giulio.camuffo@kdab.com>
Differential Revision: https://phabricator.freedesktop.org/D1209
libweston-desktop is an abstraction library for compositors wanting to
support desktop-like shells.
The API is designed from xdg_shell features, as it will eventually be
the recommended shell for modern applications to use.
In the future, adding new shell protocols support will be easier, as
limited to libweston-desktop.
The library versioning is the same as libweston. If one of them break
ABI compatibility, the other will too.
The compositor will only ever see toplevel surfaces (“windows”), with
all the other being internal implementation details.
Thus, popups and associated grabs are handled entirely in
libweston-desktop.
Xwayland special surfaces (override-redirect) are special-cased to a
dedicated layer, as the compositor should not know about them.
All the shell error checking is taken care of too, as well as some
specification rules (e.g. sizes constraint for maximized and fullscreen
surfaces).
All the compositor has to do is define a few callbacks in the interface
struct, and manage toplevel surfaces.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Giulio Camuffo <giulio.camuffo@kdab.com>
Differential Revision: https://phabricator.freedesktop.org/D1207
These are useful to implement grabs.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Giulio Camuffo <giulio.camuffo@kdab.com>
Differential Revision: https://phabricator.freedesktop.org/D1245
When no outputs are present, and no output resource is given,
a fullscreen surface won't get configured. This code ensures
that surface is properly presented on all outputs that get
connected after a surface has been created, but only if no
output resource was previously given.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This fixes a crash in animation related code where weston
would crash in weston_view_animation_create when the
view had no output assigned.
This makes sure that animation gets created and released
immediately, so done and reset callbacks still get called
properly.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
[Pekka: put a '{' on the right line.]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When all outputs are gone, there are no current read/write
surfaces associated with a context. This makes the previously
created dummy surface current until an output gets attached
to avoid any potential crashes.
v2:
- Remove unnecessary objects
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When all outputs are gone and views were created before they
were gone, such views would have no output object assigned and
nothing would assign it later. This makes sure all views are
set as dirty, so they can get an output assigned when an
output gets plugged in, if they didn't have any output assigned.
This change also works when a new output is added even if there already
are outputs in use. A view may be partly off-screen. If the new output
appears at a position where it overlaps an existing view, that view
should get updated.
It is enough to process only the main view_list, because views not on
that list are not shown for the moment and so do not need an immediate
update. Instead, they will get updated later as needed because making an
off-list view to go on-list inherently requires calling
weston_view_geometry_dirty().
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
[Pekka: addes commit msg paragrapha 2 and 3.]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
This uses container_of instead of explicit cast to retrieve
backend and output objects from generic weston_backend and
weston_output pointers.
v2:
- Remove unneeded cast
- Remove unneeded line breaks
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Adds a safe strtol helper function, modeled loosely after Wayland
scanner's strtouint. This encapsulates the various quirks of strtol
behavior, and streamlines the interface to just handling base-10 numbers
with a simple true/false error indicator and a uint32_t return by
reference.
Test cases are loosely derived from an earlier patch by Imran Zaman.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Make the error checking consistent with other strtol() calls.
Note that since strtol(nptr, &endptr) sets endptr == nptr if there were
no digits, this catches the case where the string was blank, so there's
no need to test *value != '\0'.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This updates the error checking for the strtol() call in xwayland's
create_lockfile to match other cases. C.f. cbc05378 and other recent
patches.
A notable difference here is that the existing error checking was
verifying that exactly 10 digits were being read from the lock file,
but the fact that it's 10 digits is just an implementation detail for
how we're writing it. The pid could be a shorter number of digits, and
would just be space-padded on the left.
This change allows the file to contain any number of digits, but it
can't be blank, all of the digits must be numeric, and the resulting
number must be within the accepted range.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This tightens up the strtol() error checking in several places where it
is used for parsing environment variables, and in the backlight
interface that is reading numbers from files under /sys/class/backlight.
All of these uses are expecting strings containing decimal numbers and
nothing else, so the error checking can all be tightened up and made
consistent with other strtol() calls.
This follows the error checking style used in Wayland
(c.f. wayland-client.c and scanner.c) and c.f. commit cbc05378.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This uses container_of instead of explicit cast to retrieve
backend and output objects from generic weston_backend and
weston_output pointers.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This uses container_of instead of explicit cast to retrieve
backend and output objects from generic weston_backend and
weston_output pointers.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This uses container_of instead of explicit cast to retrieve
backend and output objects from generic weston_backend and
weston_output pointers.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This uses container_of instead of explicit cast to retrieve
backend and output objects from generic weston_backend and
weston_output pointers.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When there are no outputs left after a hotplug event, weston
will terminate. This isn't desired when trying to get weston
to work with zero outputs.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Returning an error when there are no connectors results in
weston terminating after that. That's not expected when
trying to get weston to start with zero drm outputs.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Renames forgotten in "libweston: use new versioning scheme".
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Quentin Glidic <sardemff7+git@sardemff7.net>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
The linker processes those in the order that they are given. Thus
as-it we can get unresolved symbols.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Common practise it to provide the includes directly into Cflags, hence
the variable is not needed and we can remove it.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Use the documented libweston-$major.so.0.$minor.$patch scheme.
An (almost) identical one is used by GLIB, GDK{2,3}, QT5, json-glib and
others.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
This patch makes the compositor user data a structure
which can be expanded with new fields when necessary.
v2:
Don't export to_wet_compositor
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Pekka Paalanen
Quentin Glidic
Yann E. MORIN
Jonas Ådahl
Armin Krezović
Bryce Harrington
Emil Velikov
Jussi Kukkonen